Snapshots of read-only... why not?

Similar Questions

• CD/dvd drive read only disks not vain iv tried everthing I can think of an infusion iv, any help appreciated, thanks lee.

  CD/dvd drive read only disks not vain iv tried everthing I can think of an infusion iv, any help appreciated, thanks lee.

  Hi leejarvis,.

  ·         What version of the operating system is installed on the computer?

  ·         What is the brand and model of the computer?

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         Have what troubleshooting measures you tried?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• How to judge whether a data store is read only or not?

  Hello

  VI client, when I select the 'Mounting NFS read-only' checkbox during the addition of a storage, the storage will not be listed during VM creation.  I checked the MOB and the SDK web page, but have not found how to judge whether a data store is read only or not.

  Do me a favor please.

  -Akityou

  You should be able to get this information out of the HostMountInfo under mode http://www.vmware.com/support/developer/vc-sdk/visdk25pubs/ReferenceGuide/vim.host.MountInfo.html

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• ReadOnly True or False using PPR - only works vertiables, false Read only is not

  I use PPR to set the attribute read-only a bean of messageTextInput in an advancedTable through the value of a checkbox (PaySite) on the same report of the VO.  This check box is selected PPR.  The VO has an EO attribute supported for the checkbox, as well as a transitional attribute named ReadOnlyPaySiteCBRNum.  The bean messageTextInput declaratively bound to the transient VO attribute with "${oa." XxmclApSuppliersVO1.ReadOnlyPaySiteCBRNum} "assigned to its read-only attribute.

  In the VORowImpl method of setPaySite for the box does the following to set the transient attribute associated with the attribute read-only the messageTextInput bean.

  public void setPaySite (String value) {}

  setAttributeInternal (PAYSITE, value);

  If (value.equals("Y")) {}

  setPaySiteCbrNum("");

  setReadOnlyPaySiteCBRNum (Boolean.TRUE);

  }

  else {}

  setReadOnlyPaySiteCBRNum (Boolean.FALSE);

  }

  }

  When the page is run it automatically displays the records.  Any document that does not have the enabled check box also indicates the field of messageTextInput updated as expected.   If I check the Site pay the VO setPaySite method is executed, and the messageTextInput field becomes read-only.  If I uncheck the box Site pay the setPaySite method is run again and the setReadOnlyPaySiteCBRNum (Boolean.FALSE) is called, but the messageTextInput field does not have to be updated as expected.  If I update the data after you apply this change, given that the value of the checkbox is now disabled, the messageTextInput field is updatable.  PPR is partially working in this case, and I don't know hwy it does not completely work.

  Any ideas?  I'll be sure to mark any useful answer or appropriate as such.

  Thank you

  I found a work around.  I added the code in bold and italic , and it works.  BTW, I'm on R12.1.3.

  public void setPaySite (String value) {}

  setAttributeInternal (PAYSITE, value);

  setReadOnlyPaySiteCBRNum (Boolean.FALSE);

  If (getPaySiteCbrNum (.equals(""))) {}

  setPaySiteCbrNum("");

  }

  If (value.equals("Y")) {}

  setPaySiteCbrNum("");

  setReadOnlyPaySiteCBRNum (Boolean.TRUE);

  }

  }

• All the files are read-only, can not be changed

  Have all my files in the c:\ drive becomes read-only. I tried several solutions, but they always seem to be read only. I can change them and they will change back.

  Help, please!

  Bryce

  Appropriating a file or a folder

  https://TechNet.Microsoft.com/en-us/library/cc753659%28V=WS.11%29.aspx?f=255&MSPPError=-2147217396

• How to show total for an Object(read only, not based on entity) view based query

  Hi Experts,

  JDEV version 12.1.3.0

  I want to show the total of column salary for reading only VO (not based on the entity, but the query based).

  The readonlyVO has some display criteria to display the data. So the total should appear only for values, I see in the user interface.

  Thank you

  Roy

  Looks like JDEV problem which was not allowing me to add the transition attribute. After the reboot of jdev im able to add the transition attribute.

• Hi why my customization is read-only?

  I click on personalization and find that everything is read-only, why?

  Ming,

  Set the option to profile DNF: customization Seeding Mode to O.

  Kind regards
  GYAN

• Files appear in 'Read only' and unable to change that.

  I have Windows 7 Ultimate. A couple of weeks, I had a big problem with some of my permissions of the user being edited (don't know how I did it but it happened) so I was unable to access programs and files, after awhile with a MS tech on cat and a system restore (failed), I just created a new user account and delete the old one.

  Everything seems to work fine now, but before I created the user account, I copied some files I had on the desktop to a flash drive and put them with my new office to the user. The property file to keep appearing as 'Read only' even after unchecking the choice and the application it is just when I close.

  This also happens when I create a new folder on the desktop, its default property is 'Read Only' - why would this be and how can I change it?

  Hi GoodfellaJC,

  Welcome to the Microsoft Answers site.

  Follow the steps mentioned below.

  Step 1:

  To view or to remove the read-only or the attributes of system files in Windows Vista or Windows 7

  1. click on Start, click run, type cmd , and press ENTER.

  2. to view the syntax for the Attrib command, type attrib /? at the command prompt.

  To remove the read-only attribute and to set the system attribute, use the following command:

  attrib - r + s drive:------------

  For example, to remove the read-only attribute and set the attribute to system for the C:\Test folder, use the following command:

  attrib - r + s c:\test

  Be aware that some programs may not operate correctly with folders for which the read-only attribute and the system attribute are granted. Therefore, use the following command to remove these attributes:

  attrib - r s by car:------------

  For example, to remove both the read-only and the attributes to system for the C:\Test folder, use the following command:

  attrib - r-s c:\test

  If the run command is not listed in the Start menu, follow these steps:

  Click Start, click principally made programs, Accessories , and then click run.

  For more information, see the article mentioned below.

  You cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7

  http://support.Microsoft.com/kb/326549

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Read only images - how to unlock

  It's the kind of thing that drives me crazy.  Hours, I tried to open images in "bridge."  The images are all files-RAW images of the milky way (night sky) that I wash to stack, with the idea that multiple images of the night sky even will show a large detail when stacked, etc. The problem is that they are a symbol of locking of the cushion on them.  This makes them an image of 'read only '.  There is no obvious way to open these images.  Two books on photoshop provide no response in the index.  Secondly, I would like to auto - align the images, but it doesn't seem to be a way to do this in CS - 4.  Any ideas are appreciated.

  Now for constructive critisim of Adobe.  Extremely expensive product that you sell, you are doing a horrible, horrible, work provide customers what they need to use the software.  Why isn't there a DVD included with the software that provides comprehensive and detailed information necessary so a question can easily answer?  Why you force your customers to your web site?  To use your web site, I had to accept your software spies, lower my security settings, deal with nonsense of password and login.  And if you don't have high speed internet, forget your site TI-loading takes forever.  I lost hours to get to this point.

  And I will never buy CS5.  I'll never buy Adobe again: the frustration level is medium to high.  Someone suggests photo editing software they like better than CS4?

  For read only files, go to Windows Explorer and select these files. RT-click top, and then click Properties. Down will be attributes. Is check read-only? If they are read-only (and not locked because of permissions, etc), if you uncheck the box, then the files will no longer be read-only. One of the common reasons to make them read-only, is if they were copied from a DVD or CD, although it sounds like you handled in ACR, from the original Camera RAW files. Is this correct?

  For files that have been locked by some other means, there is great use, Unlocker, which should be able to unlock the files. Not necessary IF they are just read-only.

  Good luck

  Hunt

  [Edit] As it took me 8 tries to this post, he gets up late, but NOW I see that Marian had given the same solution and an hour before. This post wasn't projection, when I started to try to this post. The forum becomes more wobbly every day!

• Subform fields are read-only

  Hello, I'm not sure if this is a bug or a setting.  But I have a form of work with subforms, if I copy a subform that already controls on it and works correctly and paste (or duplicate also), when I saw it, these glued controls are any type of read-only and not power in them.

  Someone has any ideas why that would happen?

  Thank you

  Joe

  

  * Update * I just uploaded the image above of subforms, the correct top, at the bottom one after copying and pasting of the top and rename it, it has now become read-only

  Ah... I just caught this mistake and found your script on the sub-shape to calculate.

  If (GenericNetworkInformation.ddlNumberofServers > = '1') then

  sfServer1.presence = 'visible' else

  sfServer1.presence = "hidden".

  endif

  Update the form attached.

  Steve

• Files read-only - changed settings but still problems!

  Hello
  I am editing a file from read-only to not read-only:
  I have a pictures folder that I'm trying to change with Windows Photo Gallery and save the original name, so to replace the original... but whenever I make changes, it says
  "Changes to this picture have not been saved. The file may be read-only, or you are not allowed to save to the location of the file. »
  I unchecked the read-only check box in the folder options and click on 'apply', but this did not help, because it still won't let me save the changes, and when I go back to the options of folder again the read-only box is checked again!
  Can anyone help? Thank you.

  The parameter 'read only' is an attribute of file having no real impact on the security settings of the individual files under it. You need to go to the Security tab of the folder properties and appropriately modify the permissions of the folder it.  In which case it's a remote shared folder you will need to do it from the computer sharing the folder, also change the share permissions to allow remote clients to write in it.

• Perform actions on read only text fields

  I work on an inventory for a renovation of the building to come and hope to make an "interactive stop' of sorts on the PDF of the floorplan showing the hardware inventory for the rooms.

  My goal is that each room on the floor plan to have an invisible field that covers (I am currently using text fields), so that when the user's mouse is in this room on the floor plan, a 'Mouse enter' action is executed to display a second text box VISIBLE read-only containing notes and inventory relevant in this specific room. Conversely, when the user's mouse leaves this place on the floor plan, a 'Mouse exit' action is executed to hide this second text box.

  I have this feature works for the most part, with the exception that the text fields that I use to describe the rooms are still visible in an opaque blue tint when the PDF file is displayed. I would have preferred them to be completely invisible and cannot be changed by users.

  If I change the property of form field to 'Hidden', or tick the box 'Read only' property, entry and exit mouse mouse actions will not run.

  Anyone have any suggestions on the best way to achieve this?

  Thanks in advance!

  Instead of a text field, use a button for mouse input/output actions. They can be parameters to have no visible border or background, so will be invisible.

• Why not make a text box read only based on drop-down of work?

  Hello experts.

  I received help on this a few hours ago, and it has worked very well so I closed the discussion and form.  However, now it no longer works and I don't know what I did.

  I have a form with a dropdown list and two text boxes.  The first text box is populated according to the value selected in the drop-down list, I used a simple table of the to do and it works as expected.  I had to bring textbox2 read only based on some selections in the drop-down field.  It worked very well at the beginning, but now it no longer works.  I did not any changes to the form except that I closed and since.

  I try to get the following to work:

  If (this.rawValue is "Junk" again)

  {textbox2.access = "readOnly" ;}

  If (this.rawValue is "More Junk")

  {textbox2.access = "readOnly" ;}

  I put this in the change event using javascript.  I use ARE 8.2 on Windows Vista 32 bit.

  Any help would be greatly appreciated.

  Thank you

  Jerald

  In the case of change you can't get the rawValue... So, use xfa.event.newText to get the modified text...

  Also, you have a space at the end of the value while comparing. In the code below I removed it.

  If (xfa.event.newText is "Junk Again")

  {textbox2.access = "readOnly" ;}

  If (xfa.event.newText == more "junk")

  {textbox2.access = "readOnly" ;}

  Thank you

  Srini

• Windows XP Home deselection of read-only on the FlexNet Adobe folder do not stick.

  I have Adobe Creative Suite 3 and all programs except for InDesign. It comes up with an error message that says license has stopped working. Adobe lists several solutions, all that I tried with one exception that I couldn't because a step said to uncheck the read-only option for one of its folders named FlexNet. However, when I do this it deselects but it does not stick, if I look back at it now read-only is enabled. On a side note, in the same solution for XP Home it also says to disable Simple file sharing which is right impossible?

  Yes, the Adobe instructions sound as if they are not familiar with Windows XP Home Edition. First of all, the read-only attribute is not applicable to records in any version of Windows - XP, Vista or Windows 7. That's why you see the behavior you are reporting. And as you point out, you cannot disable Simple file sharing in XP Home. In all cases, the Simple file sharing (which controls how a computer connects to other computers in the Local network) is likely to have something to do with InDesign does not.

  I'm sorry that I'm unable to help you with this issue of Adobe, however. I guess you have uninstalled/reinstalled the program? If this isn't the case, you should try it. You may find an answer by posting in the InDesign user forum:

  http://forums.Adobe.com/community/InDesign

  MS - MVP - Elephant Boy computers - don't panic!

• Why do I get a 'read only File' it means of a new document?

  When you save a file in Word 2007, which I just created, I get a box that says he is 'read only', even if the file is NOT read only and just created. This seems to happen randomly, and not with all the files, but on frequent basis. I don't know why this is happening or how to fix.
  Thank you!
  Dave Henderson

  Hello Davehen,

  Welcome to the Microsoft Answers Community!

  This sounds like the behavior of the trial version of Office 2007. Have you installed the full version on the trial version?

  If yes try to uninstall then reinstall Office 2007 to see if that solves the problem for you.

  If still no luck, try to reach out to the newsgroup issues General Word for assistance.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think