Soften the edges

Similar Questions

• How to soften the edges of an image?

  How to soften the edges of an image?

  There are a lot of different ways. Here are just a few.

  Add an inner glow to your layer:

  

  Make a layer mask and add a circular gradient to the mask.

  

  Make a shape or pixel layer and add a clip your image layer and Gaussian blur to that.

  

• Soften the edges of the isolated 'product'

  I have pictures of products (pieces) I want to isolate the background. The quick selection tool, I can select the background and make it white (or transparent maybe?)

  But that leaves the party with a relatively rough edge (almost as if it's not anti-aliasing). One thing I can do manually, is add a blur on the edge, but it seems that there should be a better way to soften the edges. Maybe some kind of anti-aliasing around just the edges or something? I don't know what would be the approrach for this standard. It seems to be a fairly common thing to want to do.

  What version of PS do you use?  CS5 has the feature of edge I refine my selection which will give you the flexibility to do what you ask.

  This and content are aware, two new features that made me to upgrade. :-)

• How can I soften the edges of an image

  I am trying to create a soft white frame around the outside of the image. How can I do that. Thank you. I have 10 items

  There are several ways to do so.

  Try filter > correct camera distortion and work the sliders of the thumbnail.

  If this is not what you are after, please point to an image with the desired effect.

• Help with blurring/softening of the edges of the video Clip

  Hi all

  I use first items 12 and I'm trying to blur/soften the edges of a video clip. I can't seem to find the right tool, ff, you've been able to do this, what tool or combination of tools did you use?

  Thank you

  Steve

  This is very easily done with cropping effect.

  Do not need to modify the edges (put them all to 0) comes from the pen.

  Set the feather to topic - 100.

• Help: Saving as jpg ignores soften the edge / mask

  Hello

  today I updated my CC Photoshop Version: 2015.1.2 20160113. 355 2016/01/13:23:59:59 CL 1059143 x 64 and since then, I have a big problem with the standard "save under"-dialog.

  If I have a layer with a soften the edges, for example, to set a thumbnail of a picture, and save this image with the standard dialog as a jpg the soften edge is lost and there is a hard edge without any sweetness (first image).

  If I record it with the old version 'Save for web' (export) as a jpg file, there is no problem! (second image).

  

  After 5 months, the problem is finally solved in the new version 2015.5...

• How to blend the edges of the Image with a gradient

  Hi all

  I've created a transparent gradient on an image. The problem I have is that the edges of the image are visible under the gradient. I know how to fix this in Photoshop, but I'm having trouble in Illustrator.

  How can I create a smooth gradient on the image smoothing without seeing the edges of the image?

  Thank you

  George

  The gradient is transparent, so you can see the edges of the image through the slope, especially since the image is cut off on the edges.

  Try to move the brown color on your gradient slider further to the right as it mix better with the image, you may need to add more mixes not so. Soften the edges of the image as much as the edges are not so difficult.

• How can I make the page smaller than the entire screen Firefox when I can't grasp the edges?

  I was looking for pictures of furniture and for the entire element on the screen, I hit the big square at the top right of the page next to the Red 'X' box. Now I can't make it go smaller using the ESC key or trying to grasp the edges you can do with email or even a Web page. It seems fitting that the page is too large. I want to see other things on my screen below the entire Internet page. Please notify.

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  Try to open the system menu via Alt + space and see if you can use the element to resize in this menu to use the arrow keys to resize the window.

• AT1S0 - Touch does not work well on the edges?

  I just bought the AT1S0 7 "Tablet but I find that the touch is not consistent on the edges of the screen.

  Quite often, I have to press the apps button or button back several times until it registers. Also try to play all the games that require to touch near the sides is impossible. I recently installed Dolphin HD and I can not start it as you need to press the following during installation, located in the top right corner and it will be not to the touch.

  Otherwise, anyone having this problem or is it just my machine?

  Thank you very much

  Also curious to know if there will be an upgrade to ICS 4.0

  Post edited by: jarcey

  Hello

  You use the latest version of Android on your fulfillment?
  As far as I know, can be updated via installed Android Toshiba service station system. Run this application and check whether an update is available.

  The 4.0 update ICS is not known to me unfortunately not found no details on the page of Toshiba

• How to count the edges within the great period of door?

  Hello

  I use a PXI-6624 counter/timer in Visual Studio C++ with Meassurment Studio.

  I want to count the edges on a signal within a high period of an input signal.
  I found the documentation entries "CTR n CBC", "CTR n GATE" and "CTR n to THE.

  My idea is simply configure the counter 0 to count the edges on CBC by blocking via DOOR.
  can be an example to my problem in the installation of nor, but above all I do not understand the description of landscaping.
  to find a good example, you must know the name of the function you want to use.
  can someone tell me the good examplename for my problem?
  What call configuration should I use?

  a little less important than my first problem is a similar.
  I want to count the edges on a signal between a start trigger and a relaxing stop.
  SRC-> signal
  DOOR-> start signal
  To THE-> the stop signal

  I found a way to count the edges of the internal clock between start and stop (2 Seperation of edge), but not for an external signal.

  can someone help me with this? especially with the first.

  B

  Hi John,.

  Thank you for your help. It works very well.

  I had a few problems with how the timebaseSource should be implemented.

  Finally, I found the solution.

  for those who do not want to search long for the code, it is here:

  Create the task
  
    CNiDAQmxTask ("CITask") m_task;
  Create the meter inlet channel
  
    m_task. CIChannels.CreatePulseWidthChannel ("PXI1Slot16/ctr0", "",)
  
           atof (minimum), atof (maximum), startingEdge,
  
           DAQmxCIPulseWidthUnitsTicks);
  Retrieve the channel to change
  CNiDAQmxCIChannel chan is m_task. CIChannels.GetAll ();
  Fix the DOOR Signal
  
    Chan. SetPulseWidthTerminal("/PXI1Slot16/PFI38");
  The value of the Signal SOURCE counton
  
    Chan. CounterTimebaseSource = ' / PXI1Slot16/PFI39 ";
  CNiDAQmxCounterReader myCounterReader (m_task. Stream);
  
    Double measuredWidth = myCounterReader.ReadSingleSampleDouble ();
  

  Thank you and goodbye

  B

• Does anyone else have trouble with pressure on the edges?

  Often, it seems that the Xoom has a mind of its own and I noticed that it seems that causes pressure on the banks to do things I'm not saying it to do.

  And then reading a book by Google Book Search or the Kindle app to touch the side of the screen to turn a page, it is often two or three instead of one.

  A lot of buttons seems to be much too sensitive. Is there a way to lower the sensitivity of the touch? I couldn't see in the settings, but it would be easy for me to miss.

  Welcome to arizona-willie,

  I don't think there is a way to lower the sensitivity to the 'touch' or region on the Xoom. I found with my unit that it does not recognize a tap on the perimeter black solid, but it will be pick-up my finger if it flies over the slightest on the portion of the screen. With the help of the portfolio of Motorola or a gel sleeve helps me keep the Xoom without touching the edges during usage. This could be another option to look at.

• County of the edges of the AI of signals with the module 9221

  Hello

  I'm counting the edges of a signal to HAVE acquired with a module 9221 on a cDAQ. The average rate is about 1 kHz.

  I'm with 10 kHz signal acquisition, but do not get the right amount of edges.

  Is there a solution for this problem. I know, of course, it would be easier to use a CTR-modul but my signals does not match the plug.

  Thanks for any help

  Yves

  Hi Yves,

  There is a method to count planking of an analog input. See the link

  http://digital.NI.com/public.nsf/allkb/B472ABA1362F44328625729C0041A8B1?OpenDocument

  I hope this will help you.

  Best regards

  Sascha Egger

  Technical sales engineer

• Does anyone have x220t pen works properly on the edges?

  In my view, there are several discussions on problems of calibration with pen where it behaves well on the edges of the screen.

  I'm too having problems with him - when I move my pen near edge or especially near the corners and cursor just runs away from the tip of the stylus to this edge. In the most affected area, movement of the pen about 1-2 mm causes the movement of the cursor by about 5 mm. It is also slightly depends on the angle to which I cling to the pen. If I hold it perpendicular to the screen, then the question becomes less pronounced.

  Good calibration on the edges is really crucial, because most programs have their menus, buttons, etc., on the edges, so the edges are widely used and areas very important on the screen.

  I tried all kinds of drivers, calibrated pen several times, including by using command line to get more calibration points, but it does not help. Even if I put all points of calibration very close to and concentrated near the corners, it does not affect behaviors corner a lot, which is odd (as I see it, calibration means that the point, it shows me on the screen, and I show what position and orientation of the pen I use click on this, then why after calibration when I put my pen again in the same position and the orientation of the slider is placed much more far as) the initial calibration point?).

  So my question is - is it possible that there is a material defect that is present only on a fraction of the x220t units and that my phone replaced under warranty will solve these problems? There the x220t owners who do not have these problems?

  
  

• My Kodak esp 9250 comes back with an error message that says: cannot find the edges of the printer paper?

  I am trying to print a long document and I get an error message that says that the edge of the printer paper is not found.  It will print one page, then print 3 blank pages then stop and display the error message.  I tried to put in different papers and alignment, but it still does not work.

  Hello

  Thank you for posting. From your problem description, I understand that you are unable to print to help you cannot long pages of printing with Kodak esp 9250 receive message: could not find the edges of the printer paper. If I'm wrong, please let me know.

  This happens with all applications that you print?

  Check this link for more information on the document the size that your printer:

  http://store.kodak.com/store/ekconsus/en_US/PD/ThemeID.3925700/ESP_9250_All-in-One_Printer/ProductID.211201600

  I also suggest you download install the latest drivers for your printer and check if it works very well.
  http://support.kodak.com/app/intfSel/intf_redirect/L2FwcC9hbnN3ZXJzL2xpc3QvcC81LDYyLDEwMjkvYy84OTAvb3JpZ19pbnRmL2tvZGFrX2IyY19lbgis

  To learn more about this, I suggest you to contact the Kodak Support.

• Photosmart 7150 cut 20 pixels from the edges printing borderless

  How a Photosmart 7150 cut 20 pixels from the edges printed everything without margin (low is only 15 pixels) using 4 by 6 in the document with tab?  Image was created in Photoshop CS3 on a PC running Windows 7 Ultimate 64 with the latest drivers from the HP site (Vista 64 more patch Windows 7).

  This is normal, the MECHANIZATION of the printer printing slightly to make sure there are no white borgers due to misalignment of paper.  You can possibly reduce the overspray by going to the settings of the printer, Advanced and adjust the overspray to the minimum.