Software control of the camera link CC1 - CC4 lines on the NOR-1426

Similar Questions

• My iPhone is stuck in headset mode.  It's the THIRD phone that has had this problem.  Why Apple won't be a manual control of the headphone plug in the software?

  Manual control for the headphone feature is required for the software.  I have had THREE phones to do exactly the same thing and I don't even use the headphones - I have a speakerphone bluetooth and headphones, so it is inexplicible why my phone would enter the headset mode and do not release the mode headphones - do not let me do a phone call that is not involving the speaker.  Apple insists on the fact that this problem is not common, but it happened to 100% of the phones that I have owned.

  doctortroyp wrote:

  Manual control for the headphone feature is required for the software.  I have had THREE phones to do exactly the same thing and I don't even use the headphones - I have a speakerphone bluetooth and headphones, so it is inexplicible why my phone would enter the headset mode and do not release the mode headphones - do not let me do a phone call that is not involving the speaker.  Apple insists on the fact that this problem is not common, but it happened to 100% of the phones that I have owned.

  It is not common in the vast majority of users.

  If you wish to have a such feature manual control available, http://www.apple.com/feedback/ will be a good resource for this comments.

  Otherwise, try to restore your iPhone as new and not a backup test to see if the problem is back by restoring your backup on each of these phones.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

• NB200-122 Win 7 compatibility / software support of the Chicony camera

  I upgraded the operating system of my NB200 122 of WXP to Win7 Pro. I am very happy with the new OS. Almost everything I do with XP, I can do better with Win7. Wait for the Chicony Camera Assistant Software.

  After a thorough search on the web, consider that it is not possible to use the internal camera.

  Am wrong me or are there workarounds to use?

  Hello

  Chicony software is not the model of laptop.
  Choose the Chicony for Win7 software that has been released for other series of laptop.
  It should work fine.

  Welcome them

• Is it possible to create a TabPane without tabs or paging control without control of the page (software controlled)?

  Trying to get my head around swapping scenes and one thing I see that is already coded and there is more intuitive controls paging and TabPane.  However, I would like to be able to create a vertical toolbar this page of controls or view tab.

  Is it possible to create a Pagination without control on the page?  Or is my guess of the Pagination control resizing so that the lower part is outside the window that opens, thus masking information page?

  Or, is it possible to create a TabPane with signs, but not the tabs?

  Can you explain more in detail what you try to do? Point of paging is to provide control of page features, and the point of a tab pane is to provide the functionality of the tab.

  If all you try to do is spend the different points of view, just add and remove views of some component layout. The easiest to use for this is a BorderPane, because it provides the methods set for different regions.

  For example:

  import java.util.Random;
  
  import javafx.application.Application;
  import javafx.geometry.Insets;
  import javafx.geometry.Pos;
  import javafx.scene.Node;
  import javafx.scene.Scene;
  import javafx.scene.control.Button;
  import javafx.scene.control.Label;
  import javafx.scene.layout.BorderPane;
  import javafx.scene.layout.HBox;
  import javafx.scene.layout.VBox;
  import javafx.stage.Stage;
  
  public class ViewSwitchingExample extends Application {
  
      private static final Random RNG = new Random();
  
      @Override
      public void start(Stage primaryStage) {
          Node view1 = createView("View 1");
          Node view2 = createView("View 2");
          Node view3 = createView("View 3");
          Node view4 = createView("View 4");
  
          BorderPane display = new BorderPane();
  
          Button v1Button = createButton("View 1", view1, display);
          Button v2Button = createButton("View 2", view2, display);
          Button v3Button = createButton("View 3", view3, display);
          Button v4Button = createButton("View 4", view4, display);
  
          VBox buttons = new VBox(3, v1Button, v2Button, v3Button, v4Button);
          buttons.setPadding(new Insets(10));
          buttons.setAlignment(Pos.TOP_CENTER);
  
          display.setLeft(buttons);
  
          primaryStage.setScene(new Scene(display, 800, 600));
          primaryStage.show();
      }
  
      private Node createView(String text) {
          Label label = new Label(text);
          HBox hbox = new HBox(label);
          hbox.setAlignment(Pos.CENTER);
          int r = RNG.nextInt(256);
          int g = RNG.nextInt(256);
          int b = RNG.nextInt(256);
          String style = String.format("-fx-background-color: -fx-background;"
                  + "-fx-background: rgb(%d, %d, %d);" + "-fx-padding: 10px;"
                  + "-fx-font-size: 36pt", r, g, b);
          hbox.setStyle(style);
          return hbox;
      }
  
      private Button createButton(String text, Node view, BorderPane display) {
          Button button = new Button(text);
          button.setMaxWidth(Double.MAX_VALUE);
          button.setOnAction(event -> display.setCenter(view));
          return button;
      }
  
      public static void main(String[] args) {
          launch(args);
      }
  }
  

  If you do not use a component of border for the overall design, you can embed just a BorderPane in your page layout and let the top down, left and right vacuum. Or you can use any component you like feel and simply call pane.getChildren () .setAll (view) to change the view.

  There are a few kicking around for this feature mini-cadres (others might recommend to some, I'm not really familiar with them) but I generally find it quite simple to create from scratch whenever I need it it seems not really interesting to use the third party for this code.

• a sentence installed updated software, "OSx recovery software update" and the overview application still refuses to work however I try to launch it. He started and left immediately after recovery immediately, she leaves, she shows also a no document error

  I just installed new updates of software, "OSx recovery software update" and the Preview app still refuses to work, however I try to launch it. He launched and immediately closed unexpectedly after unexpectedly WARNING recovery he immediately left again, it also shows a notice of error document

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Camera Link or USB3

  I have a vision system using a color camera and frame grabber (1410).  As the future of cards near his end, prepare for obsolecense I think camera Camera Link or USB3-migrate.  I used the Camera Advisor and did not see an option USB3.  USB3 has the bandwidth and is less expensive than the Camera Link but I don't want to have to deal with the writing of my own vision of calls to acquire images of the USB3 camera or change the settings.  I want to be able to use MAX to do preliminary tests / troubleshooting the device.  I had problems with not being USB2 devices is not 100% compatible with the drivers OR so I worry about the USB3.  My question is should I just go with Camera Link or I'll be able to easily use the USB3 with LabVIEW?

  You don't need to use the Camera Advisor to see if compatibility exists with USB 3.0. You just need to make sure that your camera is USB3 consistent Vision. Also note that comparing Camera Link with USB3 may not be the best. I see the USB3 compete more with the GigE interface. Camera Link interface can give you with bandwidths up to 850 MB/s and USB3 can give up to 400 Mbps with GigE around 125 MB/s. The USB3 plug-and-play functionality is very similar to GigE.

  NOR-IMAQdx, part of the Vision Acquisition Software driver package, supports USB 3.0 compatible USB3 Vision devices so you should be OK, using software products from National Instruments (including MAX) to interface with your device. Remember that USB 2.0 devices was a different story. With which National Instrumetns took only supported these devices with a DirectShow interface.

  In addition, suppliers of vision and camera announced USB3 only last fall. So there still some time before USB 3 becomes most used in the industry. Basler has just published the cameras Ace USB 3.0 , but they will be available in Q2.

  If you don't need the benefits of Camera Link and USB3 fills your specifications, my recommendation is to go with USB3.

• Question setting baud rate to IMAQ using Camera Link

  I have a card PCIe-1433 to link camera, with a camera of Basler. I found that I can put the gain and exposure both directly in the camera with the help of the link series and order series. It works very well. I do this programmatically by using the CLAllSerial.DLL.

  Series orders take too long to send in my application because of the default 9600 baud rate, so I was able to send a command to the Basler camera up to its transmission speed, then changing the baud rate of the port com series camera link for the match. The result is that I can quickly talk to the camera. Sweet so far.

  However, with the Basler camera and camera link com serial port to the higher transmission speed, I can no longer acquire images using imgXXX IMAQ commands. I get a time-out of orders series IMAQ must use to control the camera for Imaging. Essentially the IMAQ driver does not know the baud rate change. I don't see how I can tell the IMAQ driver what output baud rate to use. Also, NEITHER MAX becomes unusable in this situation.

  How can I, via the IMAQ driver, increase the speed of transmission of orders series to the camera via the connection of the camera?

  See you soon,.

  Wayne

  So, I thought this close and post the solution. To increase the speed of transmission of communications series through camera link, you must:

  -Use the NI Camera File Generator to change the file of the camera (or simply edit it directly, since it is the text file).

  -Run NI MAX and connect to the camera using the new camera file. MAX will not be able to talk to the camera at the moment, because the speed of camera has not yet been changed.

  -In your application, first set the link rate 9600 series, so you can talk to the camera. Now change the baud rate in the camera itself, using all save changes, etc., are necessary for the camera, you are connected to. Finally, change the speed of link series to baud rate selected in the file of the camera. (It goes without saying that the serial link baud rate and baud rate camera must match).

  Now, both the driver AND AND the camera are according to the new baud rate. You can exit the application and allows to access your camera... until you turn off the camera... how he NI MAX (at least the Basler I use) restores baud rate 9600. Works great!

  See you soon,.

  Wayne

• Acquisition of images using PCI-1426 and Camera Link Camera

  Hello

  I am writing a program to capture images of a Camera Link camera via the PCI 1426 acquisition card in LabVIEW. The problem that I am facing is that I am unable to find the correct controls in the functions palette to start the image capture. Could someone tell me please how much control I'm supposed to use?

  I've worked on similar request sometimes back, I used IEEE 1394 camera, so once I found the correct block diagram controls I should be able to go from there.

  Thanks in advance,

  Sandeep

  Hello Kristen,

  Thanks for the suggestion. I was able to solve this problem. I think that was what was causing the problem I have LabVIEW 8.6 installed on my system and he had the Vision Acquisition System (VAS) 8.5.1. But, once I installed VAS 8.6 I saw the IMAQ in the functions palette.

  I'm guessing that LabVIEW 8.6 does not recognize the toolboxes of previous versions.

  Sandeep

• PCI-1422 and RS 232 control of a camera Hamamatsu ORCA-HR (HR C4742-95-12)

  Hello

  I'll have some incompatible problems when I try to control a camera Orca-HR (Hamamatsu C4742-95-12 HR) via RS232.

  I have a feeling that the problem comes from how the RS232 port emmbedded (emulated?) in the PCI-1422 is used or recognized by the various software that I've tested.

  So first, this port emulated/integrated should appear in the series, Max & list parallel port? I don't think, but he's not here, that's for sure. I have 'only' the projection of card PCI-1422.

  Case where I can access some of the attributes (accessible from limited functionality) camera:

  -By MAX I can change some settings so the snapshots of controller and make.

  -I can access these functions by IMAQ ('IMAQ camera set attributes.vi', etc. see Appendix vi example).

  -J' have a full control of the camera via the Hamamatsu Hipic 8.0 software, but only if I use the internal drivers and a different com port than those incorporated in the card PCI-1422 (Hipic offers not only port com in any case perhaps because there is no by saying?)

  Case where I can't access the camera at all:

  -If I try to use VI to a Hamamatsu (the most recent in sample screws & DLL or older version), it does not work: calls to any function of the 'tmcamcon.dll' return errors, pointing to the fact that there is no camera detected: the first sub_Vi (tm_initialize.vi) will return no error but zero connected camera and other screws return errors saying there is no camera using this handle, or no camera can be activated at using this handle.

  -I have NO camera control via the Hamamatsu Hipic 8.0 software if I use the DCAM API drivers no matter what com port (incorporated in the card PCI-1422 or other).

  Does make any sense to you?

  I just thought that the Hamamatsu screws cannot access the camera via emulation RS-232 of the PCI-1422. Is there a configuration setting, that I could use to those who do work and do not have to restart from scratch with IMAQ and with only limited functionality?

  Thanks in advance for your answers.

  Hello

  In fact, you can have access to the serial port integrated on the PCI-1422 map only with IMAQ functions.

  This explains that you cannot see in the section "Series and parallel" in MAX.

  I have not really well know PCI-1422, but there's probably a way to access the serial port on the card PCI-1422 in MAX.

  Camera attributes, you are able to access with IMAQ, y then the camera assigns the has camera driver.

  If you are able to access more attributes with Hamamatsu driver, it is the manufacturer who decided to restricted access to other drivers.

  But if you are not able to use the screw manufacturer, you should probably call him to find out why it works badly. Perhaps a version control problem or a update of the firmware?

• setting the parental control on the volume on the media player control is possible?

  my daughter is maxing out the volume on windows media player using headsets is it a parental control on the volume controls

  Hello

  Unfortunately there is not this setting in Windows media player, but there could be some third-party programs that will help you accomplish your task. You can search for programs using your favorite search engine and check.

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  However, you can post your suggestion in the link mentioned below so that we can improve Microsoft Products.

  https://Connect.Microsoft.com/continue.aspx?PAGETYPE=2®Type=2&cru=%2fdashboard%2F%3fwa%3dwsignin1.0&cu=

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• is my computer, I said perhaps victim of a cloning software - when my Windows came with my HP computer.

  Why my computer says that I can be a victim of a cloning software - when my Windows came with my HP computer. ? I had the computer for 4 years and it just started saying this error recently!

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/905474

  It will be useful.

• Vista's Parental control prevents the launch of iTunes Store - allowing sites Web does NOT resolve.

  My daughter is unable to launch the iTunes store in iTunes when parental control is on.  If I turn off parental control it works.  See this post- http://social.answers.microsoft.com/Forums/en-US/vistamedia/thread/64a593eb-8ae4-4605-86f6-8a941244f2d1/ - the answer it does NOT solve the problem, and you can see at least 3 others have the same problem as I am.

  To reproduce:
  -Download and install iTunes.
  -Create a user of Vista with Parental controls active.
  -Log in as user, and launch iTunes.  This method works.
  -Try to access the iTunes Store.  It hangs and never ends.
  -Add web sites to the list of 'Green' in the Parental control as suggested in the post mentioned above.  This has no effect.
  -Select "allow all websites and content.  There is still no effect.
  -Disable Parental controls for the user.  link iTunes Store arrives without problem.

  I find that my daughter is unable to access the iTunes store unless I have turn off the parental control.  I would use Parental controls.  Help, please.  Thank you.

  Rock you.  Yes, it seems that this problem could be solved by adding iTunes in the HTTPExemptions list.  In particular, adding a String key under:

  HKLM\Software\Microsoft\Windows\Current Version\Parental Controls\HTTPExemptions

  The key name and the value must be the path to the executable to iTunes (c:\program files\iTunes\iTunes.exe on my machine).

  I guess the drawback here is that now that my kids could, theoretically, use iTunes to access any URL on the internet, but to my knowledge, there is nowhere in iTunes where they could just type a URL and go.  In addition, there are Parental control built into iTunes as well.

  Thank you!

• I need a download of software recommended for the Transcriber ICD-PX312 for Windows 7.

  I installed the software that came with the ICD-PX312 on a windows system 7 and it crashes constantly. I need a download location for the software recommended for the valid software for the Windows 7 platform.

  all links will be useful.

  Hi Tim,.

  Welcome to the community of Sony!

  Download and install the latest version of the software of the Organizer from the link below:

  http://eSupport.Sony.com/us/p/SWU-download.pl?MDL=ICDPX312&upd_id=8218&os_group_id=5

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• Reset computer to factory settings, installed SP1 and lost control of the keyboard and the mouse. Had to do system restore just before the installation of SP1.

  Original title: help

  OK to reset to factory settings to allow hopefully laptop to read CDs again, then downloaded installed sp1 and lost control of the keyboard and the mouse, and still can not play music not forget hadda restart in safe mode to use the system restore to just installing the sp1 b4

  Hi MartyFenwick,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. What is the brand and model of the mouse and keyboard?

  3. you receive an error code or message?

  4. is everything works well after running system restore?

  5. what exactly do you mean by "hadda restart in safe mode to use the system restore to just installing the sp1 b4?

  6. what happens when you try to play music CDs?

  7. what program you use to play the CD?

  Please follow the methods and mark the question below:

  Before you install SP1, follow the method 1 and 2.

  Method 1:

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  Method 2:

  I suggest you disable the antivirus for temporarily until the installation of SP 1.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  Follow the steps in the link for problems with the keyboard and the mouse below.

   
  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 4:

  Follow the steps in the link below.

  Learn how to install Windows Vista Service Pack 1 (SP1):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  I hope that the information above helps you.

• Take ownership and Grant full control to the "Right click" Admin options appearing suddenly

  Nice day

  My organization has experienced a weird event from last week. Some of our remote workstations in our stores have begun to have the options of 'Take Ownership' and 'Admin 'total control' Grant become available when a click with the right button on files and folders on these workstations. Neither myself, nor the other employee IT made no changes to these machines in question. No new parameters, no new software, they are the Point of sale and are generally left alone. I did some research and can't find anything that may have caused this intentionally. Of course, our concern is the security of these machines, and whether or not they have been compromised. Analysis of the nature report various nothing. I saw that a registery cvhange can remove it, but I still need the source of change.

  Get help maybe why this has happened to a few workstations would be very appreciated. I'm sorry if this question has been asked and more if its been answered. I spent some time digging around and can't find an answer. Thank you for your time and consideration in this matter. And do not hesitate to ask questions. They are WIndows 7 Pro machines with the latest updates.

  Thank you

  Hello

  
  Thank you for visiting Microsoft Community.

  I suggest you to post your query on our TechNet Forums social as this question right here.

  Please refer to the reference to the link below to send your request:
  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  
  Hope this information helps.

  Thank you.

  Sincerely,
  Ankit Rajput