Software fft or fft hardware

Similar Questions

• Can I run 32-bit software on 64-bit hardware/OS

  original title: 32-bit software but 64-bit hardware/OS

  Y at - it a fix for AutoCad (32-bit) Windows 7 (64-bit).  AutoCad does not have a solution, but I was wondering if there is something I can do with the OS (64-bit) to be able to use my 2005LT (32-bit) AutoCad.  Wouldn't be better to buy an updated release of AutoCad?  Can't wait to spend the money because the 2005 Version has everything I need.

  Your version of Autocad is compatible with win7?, and depending on the version of win7 you can have the Windows XP compatibility mode

  It usually makes no difference with a 32-bit application, it should run on a 64-bit operating system, for example, the 32-bit version of Office works well on win7 64-bit, even if it is a version for which a 64-bit one is available (2010)

• Trying to determine if BCD is fixable software/driver problem or hardware failure (GPU)?

  Hello

  I think this is the right place to post dump files memory to get the help of troubleshooting questions? I started on this: link

  to use Driver Verifier, and the latter built: link

  Learn how to find and download the files to get help. So this is a link to a drive to memory.dmp, extreme system windows system and report AIDA64 information: onedrive

  I suspect that my problem is a graphics card fault, but before I go out and buy a new one (not the best time now) I'm trying to determine if it is indeed a hardware problem that needs to be replaced or if it's a software/driver problem that can be solved. I had this crash pop up sometimes in the past, but it was very little common, until two days ago, I was playing a game more modern and the screen cut out on me & computer crashed. I had to be hard to recover the low once or twice until. I went to a game played and lower spec for awhile and it crashed again. Now it crashes whenever I start (sometimes canned music plays while the screen is dead) and now also when you watch a video or just browsing youtube.

  I already messed up around the graphics driver is uninstalled, using a program slate for leftovers, running a complete windows defender scan in safe mode and reinstall the graphics drivers. Doesn't seem to help. If my computer is turned off for a while she seems okay if I do not do much with it, but once it blocks then happens much more frequently to the point I just have to close for a while. It should not also be an overheating problem, I ran a tool to check the temp and my card works at 37 c in windows and 43 in a game low spec.

  For any help or suggestion would be appreciated, thanks. Once again, I want to know if it is something that can be fixed or if I need to replace something. I really need a new PC, but do not have funds for the moment, but I can handle a new GPU.

  If you have the integrated video card, you can always use it and calm down your use of graphics for a while... also consider whether there are computer shops and parts used in your area and find a backup card. If you need to adjust your monitor to the onboard video (as in DVI / VGA) there are adapters for this that attach the monitor cable with the connector on the computer.

  Redundancy, even if it is the same, is always good.

• Transfer of software XP on new hardware

  If my version of XP is an OEM version, is there a way I can transfer to a new laptop?  I retired it came with the original equipment.

  Unfortunately, a vwersion OEM in Windows XP cannot be transferred to another computer.  If you want to install Windows XP on your new laptop, you can download Windows XP Mode.  Please note that you must run Windows 7 Professional or Ultimate Edition for this option.  If you have Windows 7 Starter or Home Premium edition, you will need to purchase a Windows Anytime Upgrade.

• Do I need to use the software provided with the wireless hardware to go wireless? __

  I have a router Linksys Wireless (wrt160n) that I am not using. I whant to buy a (Linksys WUSB600N) for my office. I want to know if I need to use the software supplied with the hardware, or can I just use Microsoft Wizard to configure my network? Operating system is Vista Premium.

  Thank you Jeremy will do.

• Webcam are denyed because it is not recognized in windows software

  I just bought a webcam and I was able to install it on another computer but I can't install it in mine, my computer says that I should not install unknown software, but I've already paid for it & I want to install it now. What can I do?

  Hi Yankel123,

  You will need to go to the Web site of the manufacturer of your webcam to download and install the latest software/drivers:

  or-hardware-that-isn't-working-properly http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-FTO

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• My Windows 7 Pro system has some serious hardware, internet connection and security issues. The system image and restore the system in case of failure.

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is whether a professional Ultimate upgrade will or will not fix these bugs.  In addition, what is the cause of restoring the system to fail?  I never turned off or cannot create regular restore points.

  Original title: upgrade a "Fix" for existing system problems?

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is if an upgrade to Professional Ultimate will be or not correct not these bugs.  Also, what is the cause System Restore to fail?  I never turned off or cannot create regular restore points.

  Hello

  1 re-installing/repairing software will not fix hardware issues.

  2. the operating system upgrade is not the way to solve computer problems that can be carried forward.

  3 1. If you use Norton, you should disable Norton inviolable Protection before using System Restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  We really need for more details:

  "My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  See you soon.

• Upgrade drive using software mirror?

  Hi all

  I just ordered a nice new 4TB hard drive to replace the 3 disks in my server at home

  Now I have a plan to make installation painless and less time than a normal upgrade

  Here is what I intend to do:

  1. install the new drive alongside existing ones

  2 create software mirrors all existing disks/partitions on the new disk mirrored

  3. sit and allow it to synchronize

  4. break the mirrors by removing the data from the old disks

  5 fact

  Can you see the flaws in my plan, I've never really played with the software mirror (usually from hardware mirroring) and I just want to be able to do it without too many problems

  Thoughts anyone?

  Hi Anetics,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful.

• How to install on windows face recognition software 8

  I downloaded the facial recognition for HP protect tools on the site of hp, but while that install shows a command prompt he needs HP protect Tools Security Manager, so I downloaded as well (HP protect Tools Security Manager v.8.0.1.1328) but while install showed an error that "this software is not taken in load on your system" while on the Web site , he says that he supports both versions (32 - bit and 64 - bit) of windows 8.

  How to install laptop on my HP pavilion G6 face recognition software.

  Hi, Germain,.

  I thank very you much for coming back to us, with the updates.

  (1) don't you try to install the HP ProtectTools Security Manager software in all compatibility modes listed there?

  (2) you receive the same error message when you try to install in compatibility mode?

  If the Windows 7 compatibility mode doesn't work, then you can also try to use the Windows Vista/XP modes and check if that helps.

  If this does not help, then the problem could be due to the incompatibility of hardware. In this case, it would be best to contact the HP support to check if there are other similar software compatible with your hardware and Windows 8. You can get in touch with them from this link:

   http://WWW8.HP.com/us/en/contact-HP/contact.html

  Hope it will be useful.

• Software for Palm Zire M150

  I have a new PC with Windows 8.  I want to get the software for my Palm Zire M150 so I can load on my new PC.  Where can I get the software to download?  I want to put the Palm Desktop on this new computer.  Or do you know another more recent software I can load which would take the data already, I have on my old PC and install it on my new?  Is there such a thing out there?

  Thank you!

  Hello

  I suggest you to contact HP support for this problem. You can contact HP on the information provided below.
   
  Palm OS/WinMo Hardware and Software

   

  http://h30434.www3.HP.com/T5/Palm-OS-WinMo-hardware-and-software/BD-p/Palm-hardware
   
  Do not hesitate to write us if you have any other realted questions for Windows.

• Crashing in the host after software upgrade form VMworkstation 6.5 to 7.1

  VM Workstation: 7.1

  Host: Windows 7 64-bit

  Client: Windows XP SP3

  The packaging of the software in question worked less than 6.5 without problem, but after upgrade to 7.1 it becomes intermittent 0xC0000005 errors and break when in software rendering mode. Hardware rendering mode, both DirectX and OpenGL, work without errors but the performance is slow incrediblely (software requirements recommended is a processor of 300 mhz so...  ) Hardware rendering is likely to slow as the host has limited on the video material and excessive CPU power.

  so...

  Ideas on software made to crash? The software will start and run for 10-15 minutes before failing, it will fail at different points, and there is no obvious cause for the failure.

  Otherwise, any ideas on why a DirectX 7 program designed for processors of P2 is running slowly unusable in a virtual machine? Host running the latest DX, comments is running DX9.0c and 3D accel is enabled in the settings of the virtual machine. While there should be more than enough video hardware (the program runs on a video 16meg card) performance instantly goes to 100% when software rendering is selected, so seems that CPU or hard drive is the bottleneck.

  Any help would be appreciated.

  Hello

  TrueChaos wrote:

  ATI Radeon HD 3200, pilot, as of 05/27/10

  3D problems always seem to relate to ATI these days. Don't say not it is your problem, but...

  On linux there are problems with the 10.2 + drivers (it is same in the release notes workstation to roll back to version 9.11 for decent behavior 3D)

  Version 10.6 is supposed to fix, but when I tried it here for one of my ATI machines at base, my screen looks like the work of lego... so I've restored to 10.5, but cannot use the 3D on this machine...

  On OS X, also a lot of problems... I was under the impression that they delivered the right drivers for windows, but if I were you, I would try a pilot about a year ago... Sorry that I don't have best advice, it's like shooting arrows in the dark.

  It is a pity that I like ATI cards, they are usually not so power hungry than their equivalents from nvidia.

  SVGAVideo_HandleEscape: Error flushing video overlay unit 0. See the BLOG for more details

  I don't really know, I've seen it before too. Never managed to see the blog, they refer to, I think it's a cruel joke, I tried just even seeking help inurl function of google without results.

  --
  Wil
  _____________________________________________________
  VI Toolkit & scripts wiki at http://www.vi-toolkit.com

  Writer to the blog www.planetvm.net

  Twitter: @wilva

• Mac Pro 2.1 starts do not

  Hi all

  My old Mac Pro 2.1 (2007) worked ok until a month ago.  Then, he stopped starting.  It will be just off the phone with the gray screen at startup.

  So when I do the recovery with cmd + R powered mode, it displays a gray screen with a battery of short horizontal lines, and it will sit there for days.

  The Mac Pro has 8 MB of RAM, graphics card is Nvidia 7300 with 256 MB of video Ram and OS x version 10.4

  No idea what it could be? The test equipment with the OSX DVD shows no error on hardware.

  When I try to reinstall the os x, then it will keep showing a message "Please restart your computer by putting out", and it will just continue to do that.

  Forward your info, advice and help on this.

  Thanks in advance.

  Hi Budkor, it may be a bad graphics card. Align on any Apple for a free diagnosis. You will need to have the repair made to a FSAA (Apple authorized Service Provider) or Apple filing for lower prices. The AHT is not very reliable to find problems. Apple has much better proprietary software to diagnose your hardware.

• Keep HP with Vista 64 bit programs to clean install Win7

  My HP pavilion m9400t was bought a year ago and failed to qualify not free upgrade.  In any case, I think I will try to Win 7.  I'm gathering that I need to do a clean install.  How to save all the extra HP provided software installed with Vista (Hardware diagnosis Tools, HP Advisor, HP Support info, Lightscribe, Cyberlink DVD suite, etc.).  I use these programs regularly and want to be able to install on Windows 7.  How to save each of them?

  If this is the case, and I lose all the extra software HP... is there a way to record programs on a DVD and the re - install after a clean installed Win7?

  Where can I find these files?

  OR conversly, if I make a superposition of Win7 on vista installation, be fine or will it be buggy?

• Satellite Pro A300 random freezes

  I had this problem for the last few weeks.

  Started during the game Football Manager 2011 and Windows Media Player in the background.
  Blue screen crash is came and never recovered from that, so I have it restored to its original condition and installed all the windows updates which have been important etc.

  Since then he has worked from time to time but always randomly freezes when I can move the mouse and but nothing responds.
  Did all error checks and scans and nothing does not appear.

  Just as my memory is now 871MB
  Would this problem solved by upgrading the RAM?
  Or is there another problem?

  Any help is the verywelcome

  Thank you
  MIC

  > Would be solved this problem by upgrading the RAM?
  Don t that s so many laptop OS freezes for different reasons
  -RAM issues
  -Questions BONE (graft)
  -Problems commutabilite between software
  -Serious problems of hardware (motherboard, etc.)
  -High temperature

  So, as you see it s hard to say what could cause this
  First of all I recommend to reinstall the operating system and clean the modules of cooling using a jet of compressed air, this will remove dust COO vents that may prevent air circulation. This can cause a temperature more high which could affect the functionality of the laptop.

• Windows Media Center "to listen or look at a conflict"... does not recognize the TV tuner

  I have completely exhausted the forum Windows Media Center for response to the resolution of this problem. I replaced my unit ATI TV Wonder Digital Cable Ready, as well as my graphics card tuner, and WMC still says 'No TV Tuner Found"and the message" listen or look at a conflict - no tuner available to meet the current demand "when I try to watch live TV. I have also a "no tuner hardware detected... Please ensure equipment is installed correctly...» "if I try to set up the TV Tuner again.

  I don't think that my answer lies in Windows Media Center or hardware from ATI. I'm now trying to figure out if it involves this feature installed at the factory of HP listed on the bottom of my computer: "GENUINE WINDOWS VISTA HOME Premium TUNER DIGITAL". I understand that it is the software and hardware.

  I would be grateful if anyone has answers. If anyone knows what this function is that was installed at the factory, and how I can uninstall and reinstall the software and replace the hardware, I understand that too.

  Thank you

  After unsuccessfully trying everything I could find that had the potential to solve my problem, I finally solved the problem myself.

  It's actually a corrupted Windows file that allows my TV tuner, which caused all my problems. I reinstalled my Vista operating system to its original state, and now the ATI TV tuner works fine. Easier said than done.
  
  Mr. Fix It