Software is not running and cannot be uninstalled after restoration. Pavilion DM4 running Windows 7.

Similar Questions

• Windows 7 does not load and cannot be retrieved after update.

  It occurs first, about 2-3 months ago. Update my Windows 7, he said: "Step 5 of 5", then reloaded, and... I saw a BIOS screen, when I chose Windows startup, he tries just to start and return to the BIOS screen as there is not any OS.

  So, then I guess not that the problem lies in the update; I tried to recover Windows from my drive, but he says that the windows are different to my computer and my drive. So, reinstall Windows, the disk and after a few updates (I think that when it came to the last of them) all repeated. So I just reinstall Windows again and turn off the auto updates, since I don't have the time to fix the problem.

  Everything works fine, until a few days ago I turn on automatic updates for it, and now I had the same problem. Fortunately, I have installed Linux on another hard drive, so I am currently using.

  What technical information I give to get any help? It's a pretty annoing because the computer is less than 3 years.

  Do not use Windows Update before installing the latest version of the Windows Update Client, KB3161647.

  https://support.Microsoft.com/en-us/KB/3161647

  Best regards, VZ

• I get this error message 'The URL is not valid and cannot be loaded' when I try to go to Firefox home. I uninstalled the modules, uninstaleed and reinstalled a new fresh firefox which did not help

  I get the following error message 'The URL is not valid and cannot be loaded' when I try to go to firefox home. I uninstalled modules, uninstalled Firefox and then install a new version. Still have the problem.
  Thanks for the help

  This problem may be caused by a corrupt installation of Visual C++ or incomplete (several versions can be installed-by-side; SxS) it lacks certain runtime components (redistributable Packages), which depends on Firefox (problem with an embedded manifest file that specifies a specific runtime version).

  You need to install the missing components (for example, Redistrbutable end 2005 ++).

  • https://www.Microsoft.com/download/en/details.aspx?ID=5638
  • [908165/questions/908165] The URL is not valid and cannot be loaded
  • bug 713167 - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll

• Update itunes to update iphone, the arrested installer not able to uninstall Hello, tried to uninstall it, but keep says its part of a network and cannot be uninstalled

  the title update: itunes original

  I was invited to update itunes so I could update my iphone, during the Update Setup stopped because he couldn't uninstall Hello, I tried to uninstall it manually but says its part of a network and cannot be uninstalled. so now I have no itunes.

  Hello

  1. what operating system do you use?

  2. What is the exact error message you received?

  I suggest you follow the link and check.

  http://support.Apple.com/kb/TS1331

  Provide more information on the issue to you help again.

• What is this mean:MVI_3165 ~ 1.wmv is not indexed and cannot be imported?

  What is this mean:MVI_3165 ~ 1.wmv is not indexed and cannot be imported?

  The. WMV file may be corrupted somehow...
  and probably is unseekable. IOW... If you play
  the file in Windows Media Player, you can not
  Drag the search bar to advance the video.

  If you want to experiment with the repair of the
  . WMV file... the following freeware may be
  worth a try:

   
  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  AsfBinWin version 1.8 [version 1.8.2.903]
  http://www.radioactivepages.com/AsfBin.aspx
  (Windows XP - Vista - 7)
  (Intuitive, fast and reliable tool for processing
  ASF and WMV files)

  Good luck...

• Windows movie maker error - the file is not indexed and cannot be imported

  I have converted a quicktime in WMW clip, but when I try and import the video in windows movie maker, that it comes up with error the file is not indexed and cannot be imported? What does that mean?

  Try another converter.

  There are to many converters available on the net...
  the following links are some examples.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (6) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

• Cannot open the 5.3 Lightroom Catalog. Download «...» It is not writable and cannot be opened"message.

  Hello world

  I'm having a problem opening a lightroom catalog. I get a message "Lightroom can't use the catalog because it is not writable and cannot be opened.

  The catalogue and thousands of RAW files are stored on an external drive.

  Here are the steps that caused the problem in my view:

  1 has worked with the catalog on my laptop. Disconnected the disk without closing first Lightroom (big mistake).

  2 connect the external hard drive on desktop PC and did extra work. Closed Ligtroom (office) and disconnected the disk.

  3 reconnect the drive of the laptop while original catalogue is always open (see #1 above). Clicked on an image at which point Lightroom crashed and closed by itself.

  The problem now is that the catalog opens is no longer on computers. Any attempt to open the results in the message "Lightroom can't use the catalog because it is not writable and cannot be opened. There is no lock or log file that can be deleted, just the lrcat file and tons of files with preview of the data.

  I hope this isn't a lost cause and I can still recover the catalog. There are 2 work days.

  Thanks in advance for any help/advice!

  Ok. I found a solution. As Ligthroom catalog is a SQLite database, you can use a database tool to fix it. Just download SQLite www.sqlite.org for your OS (Windows 7 in my case) and unzip into C:\SQLite for ease of use. Copy your catalog corrupted the C:\SQLite file as well as to keep things simple.

  At the command prompt start > run, type 'cmd' and press ENTER. This opens the command prompt where you will need to run the following commands:

  1 cd sqlite

  2. echo .dump | SQLite3 yourcatalogfilename.lrcat > tempcatalog.sql

  3 sqlite3 - init tempcatalog.sql newcatalogfilename.lrcat

  After the execution of line 3, you may or may not see error messages. No worries, it simply truncated faulty records that is what causes the catalog to crash.

  Now, copy the newcatalogfilename.lrcat into your lightroom catalog file and run it. You should be able to get things up and running to where you left, or to the point where original Lightroom Catalog has been corrupted in first place.

  I hope this helps. It took me a few hours to find a solution, but it saved me at least 2 days of work. Original credit goes to the author of the article according to http://www.simplyness.com/more-photography-tips/recover-corrupted-unrepairable-lightroom-3 - catalog - with - sqlite.html. It seemed to have worked for Lightroom 3 and still worked for Lightroom 5.3 in my case.

• cluvfy returns the "/tmp/" path does not exist and cannot be created on nodes

  Hello
  I'm installing Oracle RAC for SAP to AIX 5 L.
  After performing due diligence for the installation of cluster service, it returns the following message:
  "/Tmp/" path does not exist and cannot be created on nodes
  This meessage happens after checking access node and the phases of user equivalence.
  This is my complete log:
  pr_bd01/oramedia/clusterware/Disk1/cluvfy / > stage pre - crsinst - n pr_bd01, pr_bd02./runcluvfy.sh
  
  Conducting due diligence to install cluster services
  
  Audit accessibility of node...
  Verification of accessibility node from node 'pr_bd01 '.
  
  
  Verify the equivalence of the user...
  Check of user equivalence passed for user 'oracle '.
  
  ERROR:
  "/Tmp/" path does not exist and cannot be created on nodes:
  pr_bd01
  Audit will proceed to nodes:
  pr_bd02
  
  Check prior to the installation of cluster service failed on all nodes.
  
  The directory/tmp is a shared file system and oracle user can write and read
  User Oracle ID is the same in both nodes
  The dba group ID is the same in both nodes
  Oinstall GID is identical in the two nodes
  The primary group for the user Oracle is oinstall
  
  Where is my problem?
  
  Thank you
  
  Published by: user8114467 on 02/27/2009 07:17

  You can also run with - verbose flag - what is the difference between / tmp on 2 machines - define export CV_DESTLOC = /.

• When I click on my icon of firefox homepage says "the address is not a valid URL. The URL is not valid and cannot be loaded. How can I fix it?

  When I downloaded Mozilla Firefox and clicked on the Firefox icon I get this message on the Firefox homepage "the address is not valid.

  The URL is not valid and cannot be loaded. "I can always access the internet but what do I do to get rid of this message. The home page does not display the icon of firefox.

  You can check the setting of the homepage:

  • Tools > Options > general > startup: Homepage

  Firefox supports several home pages separated by ' |' symbol (pipe).

  • https://support.Mozilla.org/KB/how+to+set+the+home+page

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help

  I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help, please.  Thank you!

  Hello golden2,.

  I understand that you have a DVD picture in your SuperDrive drive, but it is not mount on the desktop and will not eject.

  Please, try the procedure described in this article using the disc is ejected.

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  Do not eject discs or discs eject slowly

  1. If the drive ejects discs slowly or appears to have difficulty, insert and eject a disc several times. Check the disc to see if it has a label or other material stuck to the disc which increases the thickness. Remove the label if possible.
  2. If the disc does not eject, try pressing the eject on the keyboard button. Some older keyboards may use the F12 key to eject the disc.
  3. If the disc does not eject, try dragging the icon of the disk to the trash.
  4. If the disc will still not eject, try to hold down the mouse or trackpad button after you restart the computer. The Superdrive should attempt to eject the disc.
  5. If the disc still does not eject, reset the System Management Controller (SMC) and repeat steps 1 to 4.
  6. If the disc still does not eject, Contact Apple or an provider of services authorized Apple, or make an appointment with a Store Apple Store for further assistance.

  Take care.

• Windows service install is not accessible and cannot be installed correctly.

  WINDOWS SERVICE INSTALL IS NOT ACCESSIBLE AND CANNOT BE INSTALLED CORRECTLY.

  Suddenly, I can't download my Quicken bank account information or anywhere else.  I first was getting the message THAT WINDOWS INSTALLER can NOT ACCESS THE SERVICE DO MAY NOT BE INSTALLED CORRECTLY. Now he wants me to search the Web, but I can't find any help you do not have to buy.  It is a new laptop with Windows 7.  Please HELP I've worked on this all day!

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• movie maker error message: not indexed and cannot be imported

  I put my video clips imported from my digital camera of MOV to WMV with Format Factory and now get the error message in Movie Maker...

  The C:\...wmv file is not indexed and cannot be imported.

  Try using the free utility WMVIndexer . It is towards the bottom of the page in the given the download link.

  The utility should be easy to follow. It will add indexes to the .wmv clip to allow quick advance and rewind indexing so that WMM can then use in the edition.

• Upgrade windows free 10 contradictory info - gets message that says PC is not compatible and cannot be upgraded

  Original title: Free windows 10 contradictory info update

  Decided to do the upgrade.  Clicks on the icon of upgrade and immediately got the screen that says my PC is not compatible and cannot be upgraded.  Clicked on the icon report to the right of the dialog box as well as report says that all control OK and I'm allowed to be upgraded.  What is correct, the first screen or report?  How can I determine which is expressly not compatible?

  Try to upgrade manually:

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually

  Also check:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

• Seagate installs but I can not find and cannot open the unit to see my files

  whenever I installed my seagate freeagent go drive.. initio default controller is the one that pops up saying ready for use, but I can not find and cannot open the unit to see my files, I can see it as (which I think it's maybe) in devices, printers as 'Initro Default Controller.

  The disc may need a drive letter must be attributed. Please try the following link to assign a drive letter to the drive.

  http://Windows.Microsoft.com/en-in/Windows7/change-add-or-remove-a-drive-letter

• The /drm-web-client/Logon.aspx file was not precompiled and cannot be requested.

  Hi all

  We currently use DRM Version 11.1.2.2.302 patch.

  We are facing the error when we open the web console below.

  The /drm-web-client/Logon.aspx file was not precompiled and cannot be requested.

  It used to work very well and we see that this web configuration file has been updated. I assume that there is a problem with Internet Information services.

  Any help would be greatly appreciated.

  Thank you

  VINET

  Hi all

  The Web configuration file has been modified by windows service and after restarting the server, new web configuration file has been created and we have web access console.

  VINET