Software to work with large video files?

Similar Questions

• How does the Macbook 12 '' works with large office files?

  Hi, I am looking to buy the 12 Macbook "", in may daly job most I ask of my current Macbook 13 "pro (early 2011) is to run excel and powerpoint files, but some are larger than 20 MB, some to the top you 80 MB." Then the Macbook 12 '' handle these files? or should I buy the Macbook pro again? The reason why I like the 12 '' is portability, I travel a lot, but I need to work with this type of files.

  The 12 '' Macbook must able to manage these files with the 512 GB of storage.

  It is only 2.03 lb > http://www.apple.com/macbook/specs/

• FMS4.5 live stream with multiple video files as a single source?

  I use Flash Media server 4.5 and I read the tutorial if I want to play the live stream, I may need to use the Live Media Encoder.

  But what I found in media encode is I manually set up everything and it only supported cameras.

  But in my case, I have several video files keep the receipt of another program and place it on the filesystem (server).

  My goal is use the Flash Media server to perform a live boardcasting with these video files one by one.

  This means when customer watch a live streaming, they won't notice the server plays mov1, then mov2, then mov3, then mov4... and so on.

  You can imagine I try boardcast say a sequences live during 60 s,.

  the video file will be not recorded entirely after 60 seconds, but not for every 10 seconds, I will deliver a video file,

  so that when watching the live of HLS customer (for example http://xxxx.com/live123( )

  When time reach 10 seconds, a video file available mov1 and FMS should boardcast this video on live123.

  When the time achieve 20 seconds, a video file available mov2 and FMS must immediately follow the boardcast mov1 on live123.

  and so on...

  FMS can dynamically create a new session of streaming (call by code),

  so that when the customer a download of some video files to the server, the FMS log new stream streaming only cilent video files?

  boardcasting as configuring the size of the screen, bitrate, etc. must be predefined on the server.

  (e.g. customer boardcast on http://xxxx.com/live123, CustomerB boardcast on http://xxxx.com/live124...)

  so the fact that possible to use FMS perform these ideas? or y at - it approaches?

  I am very new to FMS, if I have any misconcept FMS or media encoder (live), please do not hesitate to correct me.

  Thank you!

  Hello

  To have OUT load videos from sources of files, to be released at this stage, you need third party software like ManyCam.

  Otherwise, FMS can use source files and a playlist-like, side Publisher.

  Thus, you must request script on the server, server to play files and publish (publish side Server) to be subscribed by customers. Essentially, we ask the server to replace GFFE/encode streams published by sources to have the publishing server-read the file stream.

  http://help.Adobe.com/en_US/flashmediaserver/ssaslr/index.html should give more information on how to do it.

  Thank you!

• How to send large video files from my iPad

  How to send large video files from my iPad

  The restriction for large files to mailing in general is defined by your email provider. Most of the suppliers imposed restrictions on the size of attachments. You can contact your e-mail for more information provider, but in general, consider a large video file too large to email.

• External hard drive does not allow me to backup large video files

  Hi - I wonder if anyone can tell me why the Toshiba 1 TB 3.5 "external hard drive I recently bought does not allow me to backup large video files from my PC.
  The files are located in the region of 5 to 10 GB and when I try to save these I get the message that they are too big for the destination.

  Any help would be appreciated. Thank you.

  Do you want to just copy/move these files from your PC to the external HARD drive?

• AirPlay - aTV video, sound effects for AExpress: does not work with large files

  Hello!

  My setup

  • Internett--> modem (Cisco?) --> a/c Airport Extreme (latest high version)
  • iMac, iPad, 2 x iPhones. iMac installed Beamer.
  • Bedroom: AppleTV 3rd GEN rev A - hdmi--> LG TV (old). AirPlay ON, 'Apple TV room '. Connected to the local network of 5 GHz.
  • Bedroom: AirportExpress 1st GEN 802.11 a/b/g N-Draft (last type of those that go right into the socket) with AirPlay - stereo--> stereo BOSE. AirPlay ON, 'room '. Connected to the local network of 5 GHz I also tried to connect 2.4 GHz network, no significant variation...
  • Living room: AppleTV 4th Gen. - hdmi--> LG TV (new). AirPlay ON, "iTV."

  Problem (abridged version)

  Most of the time - but not every time - when I stream video + audio iMac to aTV and choose to listen to the audio portion of the aTV to a separate AExpress (which is connected to a better BOSE audio system), the movie will not play. Streaming both audio and video - and only - the aTV works perfectly, but then I have bad sound, since I use the TV's internal speakers. What is reasons for it? Tips to fix it?

  Problem (full version)

  Every time when I stream video and audio from large multimedia files (about 3-4 GB .mkv) of the iMac (Beamer) on the ATV to the room, I didn't encounter any problem. Buffering is fast (2-4) and there is no delay or other negative experience. Unfortunately, as with all flat TVs, the sound of the TV is poor. Since I have a BOSE sound system, placed around this TV, I like to use it for audio. As I do this is - after the streaming media file (Beamer) iMac to the bedroom aTV - pressing the Center "Select" button during 1 sec on the remote to display the "audio" preferences and select money "Chamber" (AExpress related to the BOSE sound system). In this way, I think that audio + video is streamed to the iMac on the ATV in the bedroom, and the sound is then broadcast the ATV to the AExpress. This is where the problem occurs. Sometimes it works very well, as today in the morning. No lag and everything works fine. But most of the time, after changing the preference "audio" in the sound stream for the BOSE, the beginning of the play symbol buffering becomes the symbol of the break and nothing happens. I hit play again and the symbol of the game / buffering symbol lights up for a few seconds, and then again to pause. She never starts.

  The problem usually occurs with heavy multimedia files / large size 1080 p and 3-4 GB, not with the simplest 720 p files weighing about 1 to 2 GB. This makes me think it's a matter of WiFi capability. But if my WiFi network should not be able to manage that? I think that the apple TV in the bedroom and the AExpress uses the N standard, so it is the limiting factor. But if this interface should not be able to handle the traffic? Is it true that do what I do - separate the video and audio - use twice the network traffic?

  I also want to mention that everything works perfectly at certain times, like this morning. Last night (12 h) it wouldn't work at all... Perhaps there are more traffic yesterday (Saturday) evening.

  Questions (summarizes all Qs in text and some new)

  1. My network be able to handle the traffic encountered at the stream video + audio iMac to mountain BIKING in the room and streaming audio of ATV to AExpress at the same time?
  2. It is true that this configuration requires / use twice the network resources?
  3. Do you also think that my problem is caused by a network limited issue / the amount of data PR. second?
  4. I have a new (flat unit with power cord separate) Airport Express. This device manage more traffic and thus possibly resolve my problem?
  5. Other suggestions to solve my problem?

  Sorry for long post, but I think that its better with much info little. Have a great Sunday =)

  I think I can explain the reason for the problem... but I have little experience with sound problems... so you will need to figure out a work around.

  The nature of wireless networks, it's to manage the stream very well... but they are much less good at the sensitive time of things like multimedia transmission continuously. In fact, if you want to stream multimedia content over wireless, it is preferable to use specialized units... no wifi. I have a 3D projector and home theater system that uses a special wireless link from Epson to the projector... It is amazing that it can handle the required data of 3D projection. It does so by using 60GHz or some these extremely high FREQ... and totally dedicated units... no wifi. In the end, we ran an HDMI cable in the wall... it was largest wireless but not could be started reliably. Wireless is simply not ready for the big time of streaming video high definition even when dedicated.

  Wireless network adapter... It is wifi, can handle only one connection at a time and it time slices between clients. It's also half-duplex, so it can only send or receive... it can't do both at the same time.

  On the other hand, modern interrrupteurs ethernet can stream to multiple devices at the same time. It can also handle send them and receive at the same time... That is to say in full duplex. This is why the networks ethernet much more suitable for media streaming wireless never can be.

  As soon as you try to use double flow... even if it is audio (low bandwidth) and a video (broadband), you will cause huge delays to the video component. The video stream has literally if stop to give the time to the audio to catch up... you can immediately see where this will lead. Low resolution, it might work... but at high resolution, there is bandwidth inadequate considering the Division of time.

  It would be much better to use the audio on the TV. Or check if the TV itself has audio output... that plug into the standard analog audio system RCA or it could even have out optical. Who will then provide a means by which the flow must not be split. My samsung smart TV offers you both.

  The other solution probably won't be viable... execution of ethernet.

• Satellite A300-1LI - HDMi works with the video but no sound on LCD TV

  Hello

  I am the owner of a Toshiba Satellite A300-1LI, operating system Windows 7 Ultimate edition. I connect to the laptop with my Bravia KDL-40W4500 and the video is ok but the audio didn't come from the laptop not the TV.

  When I had Windows Vista everything worked well. I downloaded the drivers to control HDM for W7 (2.0.0.1) but still does not work.

  Any ideas?

  Concerning

  Hello

  Have you changed any settings in the sound properties of playback devices?
  I have a BRAVIA 32 LCD TV and I tested with A300-1LI and Satellite A500-157.

  With two laptops, it works well but not with the default settings. What I did is to enter the playback devices and I disabled all listed devices it except HDMI digital output device.
  To do this and start an audio or video file, and check again.

  Please let me know if it works for you.

• Download issues of the article with the video file

  Hello

  I can't download a .article file that has a video. Article file is 51MB.

  It just says: to run, and the progress bar does not exceed 15%. Is no error message or another.

  Anyone else having problems downloading files with the video?

  Thank you

  Cindy

  Hi Cindy,.

  I have downloaded and publish a video section with more than twice the size you used (it has 105, 35 MB) and it worked without any problem.

  -Have you tried using another internet connection (a cable instead of a WiFi network)?

  -You have just the video in the article?

  Thank you

  Andrei

• Compress a large video file up to 4 GB

  We are doing a video it takes to run for 8 hours approximately. The video will be about 5 minutes, but she repeats over and over again for 8 hours. It must coordinate with three other videos, so it cannot be on a loop. The file is likely to be very large. Is it possible to compress a video file of 20 GB to 4 GB?

  Well, there's some good old math involved. First of all, your best bet is to use the H.264 codec (I say H.265 but which becomes probably before us at the moment...). If the video is 8 hours, which means that it is 28 800 seconds. And it must be less than 4 GB = 4, 000 MB (megabytes) = 32, 000 MB (megabytes). (8megabits = 1 megabyte) It's not good news for you because it means that your target bit rate should be around 1 Mbit/s (1 megabit per second). 28 800 seconds x 1 Mb/s = 28 800 MB = 3.6 GB

  It's a VERY low flow for 1920 x 1080 video or even 1280 x 720. The video probably will look a little blurry. If there is no way around this, I would export to 1280 x 720 to get a little more for your money in the flow, but it's a challenge anyway you look at it!

• Pre for Mac can work with xVid .avi files?

  Well, I have some of the xVid .avi files and wonder what I should do to get the first Elements 9 for Mac that allows to work with them. I can't seem to find the right codec and I don't know if that would solve my problem even. Yes, the codec would read QuickTime files, but El first would be able to work with them?

  I also thought I could use the Super video converter (free app) on my PC to convert these files to something other than Premiere Elements will love. I guess that .mov would be preferable. I don't really know if this might degrade the video, but I suspect it would be.

  What do you think guys what is the best approach?

  Thank you very much!

  A DVD uses MPEG2 format, transcoded VOB to DVD - take a look at a DVD 'Hollywood' sometimes to see the structure of directories and files

  XviD/divx are variants of the MPEG4 codec... and cannot be directly used to create a DVD... they must be transcoded

  Because thay are not intended to be edited (they were designed for delivery, often via streaming video on the ' net) you will need to convert for use in PrEl

• Premiere Pro CS3 crash with many video files

  Hello
  I'm back from my vacation to Ski with a lot of short videos (a few minutes) that I took on camera Canon P & S, about 50 records.
  I imported the 50 files at first and tried to work on a film, but slow work and each commads little as the first breaks down.
  I've noticed that for every new file I add to project 20K of Rams are used - 1 G to 50 files. I also get message of low resources of first who recommend to save my work.
  The video is a video standard (not HD) 30 frames per second and the project is also standard.
  Why is this happening?
  The first has a limit to the number of files that you want to import?
  Is there a problem with the video format?
  How can I solve this problem and get a stable editing environment?
  
  Thank you
  

  OK, you've got to MJPEG (Motion JPEG), so I recommend the Morganor MainConcept MJPEG CODEC. Or the other of those who should help you edit MJPEG images natively in PrPro. Most users find the MainConcept the best of both, but I believe that they both have a trial. Don't know if the trial of watermarks, or is only limited in time. Web sites should tell you.

  Good luck

  Hunt

• Problems with the video file (wmv) path - Director Keeps restoring old road

  I am looking for assistance in obtaining a video playing live per floor in my movie once it is burned to CD.

  What I found is this work expected to use a relative path , and my film must find the video files very well.  However, I have great difficulty with this.  I was able to change the 'filename' from the video cast member to a relative path (@Video\videofilename.wmv) and the property inspector reflect this change.

  

  However, once I save, publish and check that it works, the film begins to search for the file in the original location.  What happened several times.  I changed the properties for the Member of the cast in the cast, as well as for the onstage cast member (not sure if their properties are related, so after a few troubled results, I tried to change both).  Whatever happens, the path in the file name field is back:

  

  I've even went up to remove the videos of the scene and casting, then add them again, using only the relative path in the file name field, does not.  The result is always the same: once I have save and publish again, the name of the file back to the absolute path.  To say the least, it's frustrating.

  Thank you very much in advance for your help.

  B

  The operator 'path' should be considered as the combination of characters "@:" or "@------" or "@/ ', then your path should be"@\Video\videofilename.wmv ".

  As you say, this should not give problems. If it persists, there are two options. Use Manager prepareMovie for the searchPathList and set the member.filename property before than the dialog box 'where's... ' is displayed:

  on prepareMovie
    _player.searchPathList.append(_movie.path & "Video")
    -- member("wmv").filename = "@\Video\videofilename.wmv"
  end
  

• ITunes is will work with the CDs/files not ripped/uploaded via iTunes?

  Does anyone know if iTunes game work with CD/files not ripped/uploaded via iTunes?

  My main purpose for the purchase of the service would be to get versions without loss of quality to everything that I ripped as MP3 back in the day, rather than having to re - rip everything.

  Any help is appreciated!

  Yes.

  http://www.Apple.com/iTunes/iTunes-match/

  

  If iTunes is not the music, it will upload your file. The only reason why it wouldn't, that is if the file is damaged. iTunes will tell you if it is unable to download a specific file.

  When you sign up for iTunes game, you can use THIS article to learn more about icons that can see for downloading songs.

• I680 can not get the Iden phone book software to work with the help of I680?

  I have 30 of I680 and I can't the iden phone book software on my PC to connect phones to manage contacts. Does anyone know how to manage contacts using a PC to the I680? Any help would be appreciated.

  DonK

  Sorry to all the world, iDEN Phonebook Manager on the site of the BIKE has just been upgraded ".» 07"version last Friday who will work with i680. If you '. " 05"or a version older than what was posted last weekend 2/21, please uninstall your current version of iPM and download our regular liaison:

  http://idenphones.Motorola.com/iDEN/support/software/organizer_upd.jsp

  If you had uninstalled the drivers or load for the first time;

  Unplug i680 of computer, first install the iDEN Phonebook Manager R01.03.07 before you connect the handset to the PC.

  Restart the computer

  Please make sure that you set the USB connection of your i680 to "Modem Data"

  Set the combined, allow your Windows computer in order to install Modem iDEN, P2k drivers drivers modem using normal Windows Install Wizard (it should find the appropriate SW if you select to install automatically).

  Continue to use MPI that you normally use.

• Cannot copy large video files from the camera

  Tried to copy a too large video from my camera.  Message says 'current picture cannot be copied' when I looked up the answers in 'help' it says connect the camera using the (MSC) usb mass storage class, and then use windows Explorer to copy the image to computer.  Please help me understand this.  I have to download or update a driver to do this?  Should I buy something?  Please don't laugh, but I'm lost.  All those who take the time to give me some step by step instructions would be greatly appreciated.

  Transfer of files from digital camera fails

  Symptom 3:

  When you try to transfer a single large file from a USB PTP camera to local hard disk drive (HDD) using the scanner and Camera Wizard, the file transfer does not immediately, and you receive the following error message:

  Scanner and camera Assistant the current image have not can be copied.
  To copy this image, click "Try Again." To no longer deal, click "Cancel".

  If you click Retry, returns the error message.

  Problem 3 occurs because an error occurs in the scanner and Camera Wizard

  Resolution:
  You can connect the camera using USB Mass Storage Class (MSC) instead of PTP. Then, transfer large files using Windows Explorer.

  When you connect your camera, it can map device memory as a player external and it give a letter under 'Computer' OR it can be configured to do this in the configuration menu of the camera.  Once you have a drive letter assigned under 'Computer' for the camera, locate the drive in question for the file you want and copy to your computer to office/etc in the same way you would any other file.