Software update on the Motorola RAZR I have

Similar Questions

• If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch

  If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch.

  Hello Anshul230499,

  Thank you for using communities of Apple Support.

  If a download was interrupted in the Mac App Store, then whenever you have new Internet download should then restart.

  If a download application is interrupted

  Once an Internet connection is restored, your purchased downloads should restart automatically. The Mac App Store may warn you that there is a problem with the download and ask if you want to restart downloads. Confirming will restart all pending downloads.

  Download time may vary according to the size of the file and the speed of your Internet connection. See this article on purchases made on iTunes Store for more information on the time to download large files.

  Troubleshooting the Mac App Store

  Take care.

• a sentence installed updated software, "OSx recovery software update" and the overview application still refuses to work however I try to launch it. He started and left immediately after recovery immediately, she leaves, she shows also a no document error

  I just installed new updates of software, "OSx recovery software update" and the Preview app still refuses to work, however I try to launch it. He launched and immediately closed unexpectedly after unexpectedly WARNING recovery he immediately left again, it also shows a notice of error document

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Software update in the Apple Menu

  Update of OS X Mavericks a week ago.  My printer Photosmart C4750 print however, the following message has been displayed - "you must install the software to use this printer.  To install the software, choose software update from the Apple menu.  If the software for your printer is not available in software update, contact the manufacturer of your printer. »

  Apple has no update of the HP printer software.  I went to the HP download site and I quote:

  "NOTE: If you have recently updated your computer with the mavericks a previous Mac OS, there is no need to install additional software."  Send a print job from your computer, and if the printer prints, you don't need to continue these steps. »

  Again, the printer works but the "error message" about having to install the software is not going away.

  Any help would be appreciated.

  Hello

  First restart your Mac, try resetting the printing system and check to see if that can help you:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Printer & Scanner.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now, try to add the printer again and check for the difference.

  If the same behavior persists, try to install the following package and check any changes:

  http://support.Apple.com/kb/dl907

  Shlomi

• How to display the software updates in the app store?

  I accidentally hide the El Captian updates in my app store, and they show more of new updates.

  Please inform how to show it again.

  Thank you

  There should be instructions in this Support article:

  • Hide and expose the purchases in the Mac App Store - Apple Support

  Learn how to hide and expose your Mac App Store purchases...

  If you hide an item that was purchased in the Mac App Store, you won't get notifications of updated ...

  support.apple.com/en-us/HT202320

  Sometimes a search can be customized to reveal more or other related topics:

  https://DuckDuckGo.com/?q=mac + app + store + show + software + updates& t = ffsb & AI = web

  {In addition, you can have (UN) ticked the boxes in the system preferences panel for App Store;}

  If so, results may also deny access to updates, according to what has been changed.}

  I hope that's what you're looking for.

  Good luck!

• Unable to control upgrade: an error occurred when checking for a software update, and the only option is to cancel or retry...

  I bought this iPhone 6 + about 4 weeks ago, today, I saw that there was an iOS updated 9.3.3. I was able to update my iPhone to work 5 sec, but not my iPhone6 +. I don't have a phone to jailbreak and current iOS is 9.3.2.  I googled the question and I tried these:

  1. You can try to update your software via iTunes. Your software update may fix this problem.

  2 settings > Wi - Fi and turn off Wi - Fi, and then click New.

  3. restart your iOS device.

  4 reset network by tapping settings settings > general > reset > reset network settings.

  5. change your DNS settings. To do this, simply tap Settings > Wi - Fi, then tap the blue arrow next to your existing Wi - Fi network. Press the 'DNS' field and enter the DNS servers; 8.8.8.8, 8.8.4.4 (Google Public DNS). After that, try a software update.

  I tried these that none worked.

  Thanks for the help in advance!

  Kimlynusa

  Kimlynusa wrote:

  I was able to update my iPhone to work 5 sec, but not my iPhone6 +.

  Why were you unable to update the iPhone 6 +? What happens when you try? You receive an error? If Yes, what is the exact text of the error?

• I'm on a macbook pro, and without knowing it, I turned to the vault of fire during a software update. The encryption process has begun. If I can't decipher, which will make my slow mac? or encryption is slow mac anyway?

  Hello

  I'm on macbook pro 13-inch (mid-2012), and without knowing it, I turned on the Arch of fire during a software update (El Capitan 10.11.5). The encryption process has started and if I don't want to read more, which will make my slow mac? or encryption is slow mac anyway?

  or at the end of the encryption process, my mac is slow?

  waiting for a quick response.

  Thank you

  Prosunkanti Sengupta

  I have a MacBook Air with active FileVault 2012. There is no significant difference in performance. Note, however, that there will be a performance impact until the original encryption is complete and that it doesn't have a way to stop it.

• Software updates mandate the reboot of the machine without options

  When an automatic software update is applied within VISA, he opted for restart my machine without the option restart when I stopped my machine. In this case, in the middle of work, I have do without saaving work. How can I avoid this new beginning?

  When an automatic software update is applied within VISA, he opted for restart my machine without the option restart when I stopped my machine. In this case, in the middle of work, I have do without saaving work. How can I avoid this new beginning?

  Then do not use 'Visa', use a MasterCard
  Open Windows Update in Control Panel. Click on the "Edit settings" link in the left frame.
  The updated value for "download updates but let me choose when to install them 'or' search for updates but let me choose whether to download and install them.
  Please do not forget during some updates are installed, the system must be restarted for the files processed by the update that are used can be replaced. Do not restart when Update prompts mean you if a security update has been installed, the vulnerability will still exist until the recovery takes place .
  MowGreen Services consumer safety update

• Software update of the W200i

  I have a w200i I want to update the software on. The phone is running "Vodaphone" software with a "Tesco" SIM mobile (ie: it is unlocked). the software is generally buggy and cumbersome and I hope that the new software will be easier to use. In particular, I would like to be able to play MP3s - a place where the software is particularly buggy. I downloaded the software from the sony erricson site update, but I can't get past the screen where you hold the c button despite trying all the combinations of large electronic engineering philosophy ("turn it and turn it on again") with my phone and computer. I realize that it is an old phone on monetery little value, but I got the habit to use it and it meets my needs. I realize also this software as Vodaphone is difficult to remove, but I don't want to get informal help from hackers etc that I don't trust them not with my personal information - for this reason I do it instead through official channels. Thanks in advance for the answers.

  I'm assuming that your phone is turned off any connection of the USB at the same time holding down the C key.

  Considering that the phone is Vodafone branded, you could try the update without the SIM card (it is not necessary for the update in any way, but it might be preventing).

• BlackBerry Smartphones what the purpose and the difference between Blackberry devices and software updates to the Blackberry Manager?

  I got my new Blackberry Curve 8330 3 weeks red and I installed the BB Desktop Manager that comes with the CD called Blackberry user tools.   Now when I click on "updates" on the lower part of the Desktop Manager, a popup window with all sorts of information that I don't know where to go first.  My version of the op is a 4.3.0 xxx what is desktop software for? Is this software integrated with the Desktop Manager, or is it a separate thing?

  Hope to hear from you beautiful peeople soon to explain this for me!

  Not necessarily. I'm a tech person, so I'd rather have the latest greatest version of ang of the software I use. So if you are happy with 4.3 and it is not crashing or causing errors so feel free to continue using it.

  You can always try 4.7 and if you don't like it uninstall and reinstall 4.3

• Software update of the agent is stuck with regular status

  Enterprise Manager 12 c - 12.1.0.1.0
  I downloaded a new agent and tried to apply it. Then I had a mistake and canceled the task of applying. The problem is that the application is stuck with the status 'programmed ':
  
  Apply regular | Oracle | Software agent (12.1.0.1.0) for Microsoft Windows (32-bit) | Microsoft Windows (32-bit) | 12.1.0.1.0
  
  The download buttons and apply a software Agent updates are disabled.
  In the past, I have:
  
  Apply regular Microsoft Windows (32-bit) 12.1.0.1.0 VALENTIN
  Successful download of Microsoft Windows (32-bit) 12.1.0.1.0 VALENTIN 3 Sep 2012 10:10:02 CEST 627.68
  Available managed Microsoft Windows (32-bit) 12.1.0.1.0 VALENTIN 3 Sep 2012 10:06:20 CEST 0.17
  
  If I click the regular status, I get: "+ error work no longer exists or is not accessible.
  I restarted the SGC, and the problem is still there.
  Any ideas? Thank you

  Please apply the patch for 13956401. When you click on the button check the updates on the page to update auto update of the "orphan" status updates will get reconciled.

• Software update to the United Kingdom

  Why is the latest version of the software "OS X El Capitan 10.11.4 update improves the stability, compatibility and security of your Mac." not available for the UK market?

  Hello frankd450,

  Thank you for using communities of Apple Support.

  I see that you are in the United Kingdom and want to switch to OS X 10.11.4. Started with this page and click on the link for the upgrade of the El Capitan.

  OS X El Capitan

  I would like to provide you with the link directly to the download, but being in the USA, I can't access the download page for UK.

  Once the operating system installed, you can then use the Apple Menu to access the App Store and install the upgrades available from there.

  Best regards.

• software update of the iWatch

  I waited hours for the software update. Now, he says, "check". Is it 'stuck '? It will never end?

  Hello

  Try these steps, who worked for others who encountered problems at the latest to step "review". However, do not interrupt your iPhone or watch if the process has already reached the point "Setup."

  On your iPhone, close the watch application as well as all other open applications (press twice on the Home button, drag up on each of the app previews).

  Remove the magazine from your watch and restarting both devices, both turning off and then restarting your iPhone first.

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off.

  -To reactivate: press and hold the side button until you see the Apple logo.

  Replace your watch on the charger, then try to update again:

  Update the software on your Apple Watch - Apple Support

• view the software update of the el capitan

  Hello

  I accidentally clicked on hide the latest software update to El Capitan and can 't find anyway to display it.

  A website says that it should appear in the menu of app store, but it ' s not there. "

  Y at - it another way to retrieve the update please

  I was able to get the update as follows.

  ' Search the Internet 'on OS X El Capitan v10.11.3 update '

  This gave her the following link/URL - https://support.apple.com/en-us/HT205356

  Go to this URL, I found a link to download the update.

  Hope this helps

  I did this and was able to manually install 10.11.3. This update does not show the APP store as being installed. »

  I tried the answer below, but could not find all surfaces to hide updates. Maybe what I did above changed this.

• BIOS update failed: the process does not have this system. The process of the utility is not complete.

  I have a Thinkpad T450s and I'm trying to update the BIOS version 1.19 to 1.20. I've created a live usb with the 'el tortio' - image extracted using linux "dd". Once I boot on the USB under Legacy-BIOS and select upgrade, it proceeds witht the error message "the process does not have this system. The process has been cancelled. "I have disabled the protection against theft, AMT (I think this is the option) and I'm sure that I use the correct .iso file from the downloads section. I don't have a Windows operating system installed, but I'm able to start in various linux distributions using Legacy and UEFI methods.

  Here is my BIOS information.

  "Manage 0 x 0031, DMI type 0, 24 bytes.
  BIOS information
  Seller: LENOVO
  Version: JBET54WW (1.19)
  Release date: 06/11/2015
  Address: 0xE0000

  Runtime size: 128 kB
  ROM size: 16384 KB
  Features:
  PCI is supported
  PNP is supported
  BIOS is extensible
  BIOS shadowing is allowed
  Boot from CD is supported
  Selectable boot is supported
  ACPI is supported
  Legacy USB is supported
  BIOS boot specification is supported
  Targeted content distribution is supported
  UEFI is supported
  BIOS version: 1.19
  Firmware revision: 1.2 "

  What could you suggest to get the update disc to recognize my system?

  I think I've fixed the problem, I formatted FAT16 USB drive and not in FAT32 and also when you use the geteltorito command, it is preferable to use the-o option rather than a redirection ">"syntax. " An article said that it is best to drop in a DOS command line using the USB boot, then run dosflash.exe from there, however, I could not edit the .bat file, but it is an option however.

  I hope this helps someone stuck in a similar situation.