I'm on a macbook pro, and without knowing it, I turned to the vault of fire during a software update. The encryption process has begun. If I can't decipher, which will make my slow mac? or encryption is slow mac anyway?

Similar Questions

• I have recently upgraded my MacBook Pro and Adobe creative suite 6.0 on the former. It of maybe a stupid question, but how do I get the software on my new MacBook Pro? My understanding is that my serial number only works with one computer at a time?

  I have recently upgraded my MacBook Pro and Adobe creative suite 6.0 on the former. It of maybe a stupid question, but how do I get the software on my new MacBook Pro? My understanding is that my serial number only works with one computer at a time?

  Hello

  You can install a copy of the software on the second machine it's just you are authorized to use on one machine at a time.

  You can check: how many computers can you install or run Adobe software on? ProDesignTools

  End user FAQ license contracts

  Please visit the given link to download CS6: applications download Creative Suite 6

  Concerning

  Bianka Attre

• Just in case my MacBook pro is off. When I turn on the screen becomes black and a folder with a question mark symbol starts to Flash. ¿Anyone know what to do?

  My MacBook pro retina just turned off. whenever I try to turn it back on, a black screen with a folder symbol and a question mark starts blinking. Can anyone help please?

  The? a mark indicating that it cannot find your hard drive. Sounds like your hard drive is dying/dead. You have a recent backup?

• Apple devices will not print not to 6700 Officejet, including the MacBook Pro and iPad

  I'm helping someone to implement their MacBook Pro and iPad to print wirelessly on their Officejet 6700. I have recently set them up with a new Apple Airport Extreme for their router. The printer connects to the wireless network. During the installation process of the printer is fine, that the MacBook can easily see the printer. The appropriate driver is installed. They also have a laptop Windows 7, which prints instanteously and has no problem whatsoever.

  When I try to print from the Mac, nothing prints. I open the print queue and it says 'Printing - a printer' and nothing ever comes of it. When you try to print from the iPad, you can see the printer and I select. However, after saying in print, said only dialog box: 'Connection to the printer' and he never - it just times out.

  Things I've tried:

  • Everything in this article which corresponds to Macs (10.8).
  • Reset the printing on Mac system.
  • Reset the printer to default settings.
  • The definition of the static IP address of the printer through the printer settings.
  • Setting the IP address of the printer via the Airport utility (after changing the automatic printer).
  • Restart the Mac after each attempt to remove the printer and adding again.
  • Using the official HP Officejet 6700 driver.
  • Use the Airprint driver.

  Other info:

  • Successfully, I can ping IP address of the printer from the MacBook Pro.
  • I can easily see the web page of configuration of the printer in the printer settings both by entering the IP address.
  • The printer is only about a month.
  • They bought this printer because the earlier had problems printing from all of their wireless devices. It is with a previous router in their ISP.

  At this point, I'm completely puzzled as to why the printer will print not these Apple devices. We have addressed all the issues that might be causing it: the network, the printer and the MacBook itself. I looked online and can't see any problem with people not being able to print to a wireless printer connected to an Airport Extreme. I saw some problems when the printer is connected via USB to an Airport Extreme, but this isn't our installation program.

  Any help would be greatly appreciated!

  Wow, I must admit, I had to do a lot of research to find something that you have not already tried! Thanks for your efforts so far @derick03 I accept the challenge of helping you get this to work.

  I have a vague feeling that the problem may have something to do with the router settings and to test my theory, I would like to try something for me.

  Please, open the preferences system, printing and scanning, click on the + symbol to add a printer, but this time, instead of the default tab, click the IP tab. Now let's add the printer using HP Jet Direct Protocol instead of the standard Hello.

  

  You can enter the IP address here, choose the HP Jet Direct and then select the printer driver, and then try to print. You will not be able to analyze this way, I just do this for diagnostic purposes. If you can print, it confirms the Hello Protocol is, and you will need to call Apple to make them turn on Hello, multicast and ensure that all the necessary ports are open.

  Not all wireless routers take load Hi or all features of Hello. Hello being the default method for the discovery of printers on a network, you must ensure that your wireless router supports Hello.

• Lightroom 6 suddenly very slow.  All my changes drag on the screen at least + 10 seconds.  The screen seems frozen between each edition.  I use a macbook pro and all my programs are up to date.  Help, please

  Lightroom 6 suddenly very slow.  All my changes drag on the screen at least + 10 seconds.  The screen seems frozen between each edition.  I use a macbook pro and all my programs are up to date.  Help, please

  Hi janeslens,

  • Go to Lightroom > Preferences.
  • Also please go to preferences > Performance tab and uncheck the box "use graphics processor.
  • Restart Lightroom and see if it works.
  • Please make sure you also update of Lightroom to the latest version, which is 6.3 Lightroom

  Let me know if it helps.

  Kind regards

  Tanuj

• When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  Yes it will be displayed.

• I have Version 5.1.10 (6534.59.10 Safari on my macbook pro and I want to upgrade.) How to make to make it so my computer displays no update available?

  I have Version 5.1.10 (6534.59.10) of safari on my macbook pro and I want to update. How to make to make it so my computer displays no update available?

  Safari is a part of Mac OS X, and the only way to obtain a more recent version is upgraded to El Capitan.

  Lion and Mountain Lion can be bought at the Apple Store but 10.11.2 is a free update.

• I bought a new macbook Pro and I can't get my iMessage to work advice?

  I recently bought a macbook Pro and I'm not able to send messages through iMessage. He repeated to me that the person that I send a message to is not a user of iMessage. It was working and then all of a sudden just stopped. Any advice?

  It takes two to tango.

  If your recipient has difficulties of Internet connection, you will not be able to use iMessage, unless you also have a link iPhone to your Mac for SMS.

• Today my Macbook Pro could not start.  He showed me the ban or no symbol.  I was able to access disk utility and run first aid on the SM0256G of SSD Apple media successfully.  Cannot start in normal/safe mode.  Should I delete/install so I can?

  MacBook Pro 13 '' end 2015.  256 GB SSD drive. El Capitan last version 10.11.4. I turned on the Macbook Pro and it could not start.  The progress bar with the Apple Logo would be present but would end not showing the symbol «»  I tried to boot mode safe - no go.  I have not reset PRAM help.  I was able to access disk utility and run successfully the first aid. No help. I was unable to restore two separate backup.  The utility show me backups however when I would go to the next screen and no backup is available.  Disk utility displays the SSD.  Can I erase the disc and download OS X install?  Thank you.

  At this point, there is no need to delete. A new copy of Mac OS X can be installed directly over the old copy. This process replaces the components of Mac OS X on a file by file basis and adds missing ones, there will be no major throwing away what anyone, unless there is a power failure.

  You have already run disk first aid.

  Now use mode of recovery (command + R to start) to "Re-install Mac OS X. It should install the latest revision of the main version that you ran last.

• OfficeJet Pro 8600 - Macbook Pro and Macbook Air does not print

  Products:

  • HP Officejet Pro 8600
  • MacBook Pro (Mac OS X, Version 10.7.5)
  • MacBook Air (OS X, Version 10.8.2)

  Question:

  • Why my Mac initially print fine, but now will not print?

  Full article:

  I have a wireless network in my house that consisted of a 30 MB cable internet, Netgear 900n, HP Officejet Pro 8600, 2 laptops from Dell with Windows 7, a laptop Lenovo with Windows 7 and Dell with Windows 7 trick, all printed matter very well.

  The HP Officejet 8600 was added to my network about 2 months ago.

  I added a Macbook Pro and Macbook Air about 3 weeks ago.  The two Macs printed fine for about a week.  Then suddenly they stop.  I spent about 2 hours on the phone with HP's Service, and finally, they said to my router.  So I called Netgear.  NETGEAR was useless!  They wanted me to accept fees for services before they would even discuss the issue.

  As a result of information provided by the HP support service, and because Netgear will not support their product, I quickly bought a new router - an Apple Airport Extreme.

  Macs will recognize the printer will print if connected via a USB cable, but do not print wirelessly on the Officejet Pro 8600.  The fine impression CPA.

  The frustration that is felt is made up by the fact that Macs printed very well with the Officejet Pro 8600 2 weeks and now the printer shows just "idle"... even with a new router. (see image below)

  Please help, thank you very much for all support.

  As a side note, the representative of the HP Service was very friendly and definitely tried to support the HP product, which is much more I can say about Netgear.

  Thank you

  

  Hello

  More likely a problem with Multicast, which Apple devices are relies on to communicate with the device through the network.

  First try unplugging the router for 30 seconds.

  Connect to the power supply and wait 2-3 minutes.

  Turn off the HP printer and turn it back on, then check all difference.

  If it persists, try to change the configuration of your router as follows

  Note: the settings below are not related with the HP product, I provide you with the steps as a best efforts and those based only on my own knowledge. You can try to change the settings of the router at your own risk:

  1. Open the router configuration page (you'll find listed as the default gateway by clicking the icon on the printer wireless, then print a network configuration report.
     
  2. Click the Advanced tab.
  3. Click the configuration option in the menu, and then click Setup WAN.
  4. Be sure to uncheck the box Disable IGMP proxy transmission and apply the changes.
  5. Click on the LAN configuration on the same Setup menu.
  6. Set the RIP RIP-2 Version and apply the changes.
  7. Restart your router and then check any change.

  I hope that you will find useful information, you can also use the guide to the user below for more information:

  http://www.downloads.NETGEAR.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.PDF

  Shlomi

• I have a macbook pro and I was wondering if I already have photoshop elements or should I buy?

  I have a macbook pro and I was wondering if I already have photoshop elements or should I buy?

  PhotoShop Elements is not an application included on a Mac. You will need to buy it, if you want to use on your Mac.

• DeskJet 2544: I have a macbook pro and I can't get my 2544 HP desk jet printer to print in color

  I have a macbook pro and I can't get my 2544 HP desk jet printer to print in color. I have os 10.9.5. My printer will copy in color but not print

  Hello

  Welcome to the forums!

  I read your post about how you seem to not be able to print in color on your Mac running the Mavericks, to your Deskjet 2544. I think that the base driver, or the driver AirPrint may be selected that could be the reason for having the option to print in black ink only.

  Here are the steps I would suggest for you:

  1. Reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Download and install the full functionality driver: 2540 Deskjet HP all-in-One Printer series full feature software and drivers

  You should now have the option to print in color.

  Good luck

• New MacBook Pro and CS6 Master Collection?

  There the compatibility issues with a new MacBook Pro and CS6 Master Collection?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Could not copy a file at the location requested. Mac OS 10, Version 10.10 [1].  I JUST bought this new macbook pro and Lightroom installed, imported 2 lots of pictures, but all of a sudden he kept denying my imports with "could not read the file" or "coul

  Could not copy a file at the location requested. Mac OS 10, Version 10.10 [1].

  I JUST bought this new macbook pro and Lightroom installed, imported 2 lots of pictures, but all of a sudden he kept denying my imports with "could not read the file" or "couldn't copy file at the location requested.  Help, please!

  Your use of the word "files" (in the plural) still makes me believe that you have not checked the permissions on the folder that is appropriate (in the singular).

  You must determine the Destination of the Lightroom Import dialog window Panel and see which folder Lightroom is really tr6ing to copy photos in (which may have been accidentally changed and is not what you may have used in the past) and change the permissions to write to this folder.

• I need help! I try to open my PDF but I get this message on my Macbook Pro! "Before you display PDF documents in the browser, you must launch Adobe Reader and accept the end user license agreement, and then quit and relaunch the browser."

  I need help! I try to open my PDF but I get this message on my Macbook Pro! "Before you display PDF documents in the browser, you must launch Adobe Reader and accept the end user license agreement, and then quit and relaunch the browser." What should I do?

  Do exactly what the message says, and it will go away.