Solution for the Photosmart all-in-one 7520e Center

Similar Questions

• Fatal error when installing the Photosmart all-in-one software on Windows 7 x 64 for printer C4385

  Hello

  I had to reformat one of my laptops and as a result, reinstall the Photosmart software & drivers for my printer C4385. I downloaded the software from the HP website (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76047-2&cc=us&dlc=en&lc=en&... =).

  However, during the installation, I get on a fatal error in the last step, "product Configuration".  I uninstalled and reinstalled several times with the same result.  As you can imagine, I am really frustrated and seeks help from the community to solve this problem.  Here is a screenshot of the error.  Your help in solving this problem is greatly appreciated.

  

  Hello

  I see that you have a problem with the printer.

  I suggest you to install the software one. Go ahead and uninstall the software first and then follow the instructions below.

  You should get to a point in the facility, which looks something like this. Please click on the area where the yellow arrow.

  

  Once you do, it will look like this. Please install each driver one by one, starting with the first options which is the printer driver. You have to disable each option, that some of these drivers will not let you uncheck which is very good.

  Once its finish, you can go back and do the following installation.

  

  Let me know the results.

• Unable to access HP Photosmart all-in-one 7520e Embedded Web Service

  My HP Photosmart 7520e all-in-one is already connected wireless, but when I try to access the Web by typing the ip address, it continues to ask for a user name and password. I guess that's the SSID and my wireless router network key, but it does not work when I get it. There is no guidance on how to implement, to find this info, change or something. And, after unsuccessful attempts of 3 I'm locked. It is assinine. I need help, but can't find an answer anywhere on this issue!

  Hi ronalds173,

  I see that you are having some connection with the Photosmart 7520 problems and have been locked as a result. I think I know the area you are trying to access to, but to make sure that, if you're taking the IP address that is assigned to the printer and that striking in the address bar in your web browser?

  If so, this connection would be not the SSID and password of your router, unless you did that. This password can be reset by resetting the defaults on the printer network.

  To do this, tap the wrench in top right and then Wireless Menu . Support on the network by default and then post. Once restored, you will need run the Wireless Setup Wizard on the printer.

  Try to access the page again. Let me know if this solved your problem.

  See you soon,.

• 7520e HP photosmart all-in-one: 7520e photosmart printer, does not connect to web services

  My printer was working fine, I share wireless between your desktop 8.1 windows 64-bit, windows 7 64 bit desktop and a windows 8.1 64-bit laptop, the latter is rarely used although it remains connected.

  Now, for some reason, my printer cannot connect to web services, it says an error has occurred, but you may still be able to use some of our services.

  I can connect to e print without any problems and it is connected to my network and wireless, I managed to send faxes, but only from the top of the charger of my printer page and not my computer, but at least it works, I can do a sheet of coverage since the fax software.

  Is this one of printers who had a few apps taken away from him? If so, this may be the problem with the web services.

  I uninstalled my software to print several times and re installed as has a HP technician but still no luck.

  Any ideas please.

  It print and scan very well although I have on my desktop windows 8.1 for the moment, I still have to

  install it on my windows desktop 7. Last night, when the technology installed on my windows desktop 7, he says you correctly it installed-windows 8.1 desktop, which of course was incorrect. I am the administrator on office computers, no homegroup, or user accounts, I just choose to share.

  Hello @emma22,

  Appreciate your efforts.

  Please check the picture below:

  

  Go to printer EWS - network - wireless - IpV4

  Click the manual IP address - suggest a manual IP address.

  Select the manual DNS, then choose 8.8.8.8 and 8.8.4.4

  Save the settings.

  Let me know how it goes.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• How to connect an additional monitor for the gateway all-in-one?

  Hello you all, I have a question I hope you a lot more smarter computer people can help me with. I have a friend who has a gateway all in one model #-ZX4931. It has a VGA port on the back. It has been also updated for Windows 10. I'm house sitting and dog looking for her in a few weeks

  I want to plug the additional monitor which by the way, it's a Dell (sorry) to work on a project I'am doing right now. I try to use the screen that she has on the All In One and I didn't like how my project came out looking

  I see on the back of its All In One, it has a VGA port. I Google several times and different words from Google, which told me that you cannot plug an additional external monitor for all in one PC, so I'm confused as to why there is a VGA port, if you couldn't plug the external monitor

  in any case, can someone please help me and give me details on how to connect an external monitor, in addition to its gateway all in one model #-ZX4931

  Looking at your specific model, I think you can try to connect an external monitor via the VGA port.

  Once you have connected the secondary monitor using the VGA port, press control + p and main Windows logo if you are able to extend or clone your desktop.

• All-in-One C310: impossible to download the drivers and software for the e-all-in-one-c310 series since the update to windows 8.1

  Since I upgraded my OS from Windows 8 to 8.1 Windows I have not been able to print to my printer all in one c310 or have I been able to use the Solution Center software.  I tried to update the software and drivers from hp website, but when I click on the download button, nothing happens.  Any advice?

  Hello

  Download and install the software from the following link:

  http://ftp.HP.com/pub/softlib/software12/COL34215/MP-109761-2/PS_AIO_07_C310_FSW_Full_Win_WW_140_408-4.exe

  Please let me know if you encounter problems using this link as well.

  Shlomi

• Trouble installing software Cener Solution for C309a printer all in one

  I've had my C309a printer for a few years now and it has worked well.  My old computer died and I had to get a new one.  I have problems to get the installed Solution Center software.  I am running Windows 7 64 bit.  I downloaded the latest software from the hp Web site.  I followed all the steps as instructed.  The printer is recognized and I can print from Word.  I can't get the solution center to load.  When I run the installation of the software on the HP website (PS_AIO_05_C309a_Net_Full_Win_enu_140_047) it goes through all the steps, but hangs at the end, then a "fatal error-wStub 459426" appears.  An error log is produced, followed by a placed file on my desktop named "HP Installation error - Windows 7".  I followed all the steps up to the wired installation step 2 D.  That is to turn off anti-virus firewall and anti and software programs.  Same error message with a different number after '-wStub ' fatal error message.  I'm at my wits end here.  Installation install photosmart essentials 3.5, but not the Solution Center software.  I need this to scan my documents!  When I try to scan from the console printer, I get an error message on the printer cannot connect to the computer screen saying.

  I have downloaded and run diagnostic printer HP program tools, print and scan the doctor, who tells me that I need the Solution Center software installed.  I don't type what I said to a diagnostic conclusion.  I followed the steps in this program without success either.

  I'm completely puzzled here. Can someone help me?

  Do not hesitate to send an email directly: [personal information deleted]

  Jeff

  Yes, I would recommend going through the uninstall of the printer of all these places, we went in front. Clean every time we go a little deeper and making one further.

• Wall mounting for the TouchSmart all-in-One 7320 (A2K04ES)

  Please, help me mount TS 7320 on the wall. I have the only information there are built-in VESA in my PC. Can you give me instruction?

  Hello

  VESA mounting system is a mounting standard (where are the holes, far, scew sizes and types...) Please also check this:

  http://www.Atdec.com.au/content_common/PG-VESA-standards.SEO

  For your machine, please use the following article:

  http://h20435.www2.HP.com/T5/the-next-bench-blog/set-up-your-TouchSmart-s-VESA-mount/BA-p/77243

  Kind regards.

• solution for the Photosmart 7520 Portal Displays the HTML code in the browser

  We just bought a Photosmart 7520. After installing it on a Windows XP computer, I tried to run Start > HP > Photosmart HP 7520 series > HP Photosmart series 7520. Opens the web browser and the HPSPProgress.hta code was displayed. A few moments later HPSolutionsPortal.hta open in another browser window. I've uninstalled and reinstalled twice with the same results.

  Hello world

  Root cause:

• Photosmart all-in - One 7520: new driver for Mac El Capitan in a 7520

  I installed my OS from Mac to El Capitan (10,11) 2 days.

  Have the camera HP Photosmart all-in-One 7520.  The printer driver will only up to Mountain Lion (10.6).  The printer works, but the scanner does not work.

  I had Geek Squad go through everything on computer, looking for latest info on your site, etc.  Conclusion: Need new driver for the scanner compatible with El Capitan.

  Is a new driver in preparation?  I would like to know as soon as it is available, because I scan a lot of information every week.

  Thank you.

  Hi @DStrick,

  Glad to see that you are using the HP forums, this is a great question other customers might wonder about too! I can help you get the required software for your 7520 for use with El Capitan! Once solve us the problem, please state the position which I accept as a Solution to help others find the answer to your question!

  This download package contains the complete software solution for Mac OS X El Capitan including all drivers and software needed: file name: HP-inkjet ink-SW-OSX - Mavericks_v12.34.44.dmg

  This software has been updated 1 October 2015 and can be found here: software and driver downloads for the Photosmart 7520

  Please let me know if this actually solves the problem, or if you need assistance. Thank you.

• 3520 e - all - in - one deskjet Seri: download the software of the e-all-in-one series HP Deskjet 3520 for Windows Vista

  I can't find a software on the HP website for my e-all-in-one printer Deskjet 3520 so that I can scan documents in the form of PDF files.  At present, I can scan only to Microsoft Paint.  My original disk is damaged.  I contacted HP Support by phone and was informed that they are no longer supplied the software download for Windows Vista, that my computer is running.  I was told that there is a way around this, that can make me to level.  Unfortunately. After being moved several times and queued contiunous, I never got a solution.  Does anyone know where I can download the software online or I want Norman to do?

  Hi WYM1,

  Here is the LINK for your drivers for the Deskjet 3520 with the Windows Vista operating system.

  I hope that this solves your problem. Let me know!

  Thank you

• Not able to find driver Win 7 (64 bit) for printer "hp psc 2410 photosmart all-in-one. pls help

  While I insert the printer USB cable to the laptop, it runs the Windows Live Update automatically and fails in the final task, the installation of the driver. It says "hp psc 2400 series - has failed.

  Then I removed the USB cable, removed the device of "devices and printers", reboot the laptop and then tried to load the driver manually. But in the window "install print driver", I could not able to find the driver for my printer ' hp psc 2410 photosmart all-in-one ' for the operating system of Windows 7 Professional (64 bit) under the "HP" manufactured.

  Can someone help me get this printer driver to use the Win 7 (64-bit) operating system? Thank you.

  Thank you, Sean. It has not solved the problem. Instead, I got to know that this will work with the 'HP Deskjet 6980 series' pilot and his summer work after I chose that one through the configuration of the local printer.

• I need an installation CD replacement for Photosmart all-in-one C4580

  I lost the CD for my HP Photosmart all in one single C4580 and need to reinstall the printer to an old high-end desktop pc (2006)

  Any advice?

  Thank you...

  You are the very welcome.

  Why not download the software on another PC and burn it to a CD and then use the CD you burned to install the software?

  Or you can copy the file to a USB flash drive and install it on the PC using the USB key if the PC has a USB port.

• Photosmart C6280: Wireless connection Option is missing from the installation all-in-one Photosmart C6280 on Windows 10

  When I was installing the complete drivers for my old C6280 Photosmart all-in-one on my new laptop Windows 10, I arrived at the place where it asks what type of connection, I have between my computer and my camera.  It provides USB and wired Ethernet in option, but there is no available wireless option, although when I click on 'Help' the third option consists of the description.  With my old laptop, I was able with print and scan wireless, so I expect to be able to do the same thing on my new laptop.  All the buttons on the installation software were grey, including the 'Back' and 'Cancel', until I made a choice, so I clicked on wired Ethernet, and buttons 'connect a printer later', hoping the third option would be there when I went to the desktop application 'Add a device' later.  No chance!

  Connect the printer via an Ethernet cable to your router and follow the installation instructions.

• How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1-1007 D desktop PC

  How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1 - 1007 D desktop PC? THX.

  There were buttons No. brightness and contrast on the front of the monitor-no onscreen menu.

  On your desktop,.
  Right-click to select graphic properties->

  in display settings, click Advanced settings
  Here you go, you can do almost anything with the brightness

  Hope it helps