solution of problems at the start of the 32-bit to 8-bit

Similar Questions

• solution of problems after the resumption of the mode standby

  After setting up my screen resolution 1280 x 1024 the computer recovers from sleep and reset my resolution of 1280 x 800, I turn off my screen saver and updated my drivers for my graphics card and I still have the same problem. Can you help me?

  Hi carlpiecealp,

  You update your video drivers?
  Coz it's the 1st thing I could check in a similar situation.
  Try this steps below and check if it works. Resume a return of the registry before making these kid as follows.
  (1) go at the beginning--> Run--> regedit and press on enter

  2) click on 'Edit' and click on 'Search' in the Edit menu

  (3) type "DefaultSettings.XResolution" (without the quotes) and click on "search".

  (4) now, double click it and change the hex value to 400, which is 1024

  (5) click "Find next", and then repeat step 4)

  (6) now do the same for "DefaultSettings.YResolution" (without the quotes) and change the hex value to 300, which corresponds to 768 and restart.

  See the link below and see what the MVP has to say. Can be useful. A guy from microsoft indeed.

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/490d77aa-8070-4D5A-a8e1-f2c5d56ad6b1

  Lets you know if it works

  Cheeeers!

  Erwin

• Solution of problems with the vmware window

  Using VMWare Workstation 7.0.1 and windows xp SP3 professional home, the resolution of the screen always changes to adapt to the vmware window. I especially run it in full-screen, exclusive mode, but sometimes I have to go to restored state. When I do, the vmware window must shrink to fit on my screen (which it doesn't) and the resolution of the virtual machine running is currently expected to remain the same for he puts just scroll bars on the edges. What is happening is that the resolution always goes down to 800 x 600 bottom of 1440 x 900 and its really annoying. Mostly because all the desktop icons move upward in the upper left corner when I change the resolution back to the larger size.

  I'm sure it's a problem in vmware itself because I tried to uninstall vmware tools of virtual pc and with that was the graphics card driver. Surprisingly, when I rebooted the virtual pc, it installed most of the pilots who were going with vmware tools except for the screen and it goes not smaller when I'm out of the mode full-screen. After that, I reinstalled tools and he did the same thing again. I'm pretty sure I should keep vmware tools, so I don't want to leave just UN-installed.

  Are there specific parameters associated with the change in resolution to fit the window? Ive looked around and ive seen settings do not really match what I want.

  AutoFit window resizes the window to match the guest.

  AutoFit Guest resizes the guest to match the window.

  (This is explained in the preferences > display page.)

  If both are true, we will resize the window when the customer changes his resolution internally, but we will resize the comments when you explicitly resize the window of VMware Workstation.

• Problems with the 64-bit on Pavilion a6620f Vista Factory restore

  I had a hard drive failure and restoration on a new hard drive. The original HD is a 500 GB Seagate Barracuda 7200.11 model ST 3500620AS. The new HD is a 500 GB Seagate Barracuda 7200 model ST 3500641AS - RK. I bought a set of restore for this HP computer disks.

  First problem was that disk 1 does not start from the internal CD/DVD drive. My Seagate drive boots fine on the same drive! I used an external USB CD/DVD drive and restore disks worked well on that. I went through the process of factory restore and in the end, I get an error message "installing Windows could not configure Windows to run on this computer hardware." I tried to change the BIOS setting from ACHI and IDE to SATA RAID with no luck. I tried to unplug the USB CD drive before the first reboot. That no longer works.  I unplugged the internal CD drive and tried different combinations with no luck. Need help I have run out of things to try! Does anyone have any ideas/thoughts?

  Hello:

  I don't know how you can get your recovery discs to work.

  Looks like you have tried everything.

  I had problems with mine too and got the same error on a HP Elite 8200 desktop computer business

  It was the first time I've ever had a problem with recovery disks.  It's very frustrating.

  I have a workaround if all goes well, you can use to get Vista on your PC...

  If you can read your 25-character product key MS, you can make your own Windows Vista installation disc. You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them (just before going forward with the actual facility) and they seem to work perfectly.

  Apparently, when you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-VI...

  After you have successfully installed vista, you can download the drivers you need your PC support and driver page.

  Paul

• kindly guide me on my problem with the 64 bit on 32-bit OS

  Hi guyzz

  My problem is that I m install windows server 2003 32-bit on a machine. the machine can also support 64-bit so after installation of 32-bit windows server 2003, I install VM workstation and then, on that, I have install windows server 2008 r2 64-bit but it gives an error... now I know logically, we cannot run 64-bit OS on 32-bit host os STRP, but I wanted to make sure. so is it true?

  What CPU do you run?  See below for the supported Intel CPU. If you host OS doesn't support VT, you will not be invited running 64-bit.

  http://Ark.Intel.com/VTList.aspx

• Not able to see the 64-bit oracle.dataaccess.dll of GAC

  Hello
  I installed the client of 11g oracle 64-bit with ODP.net and deployed Oracle.DataAccess.dll in the GAC (it is deployed on C:\Windows\Microsoft.NET\assembly\GAC_64\Oracle.DataAccess). But I'm not able to return this dll to a project in Visual Studio, it does not appear in the window "Add reference". Please help me solve this problem. My system is a 64-bit computer.
  
  I did not submit this problem in the 32-bit computer. In 32-bit computer, I installed the client 32-bit oracle 11g and deployed Oracle.DataAccess.dll in the GAC (it is deployed on C:\Windows\Microsoft.NET\assembly\GAC_32\Oracle.DataAccess). I could see this dll to the project in visual studio.
  
  
  
  Kind regards
  
  Kiran.

  Hello

  Do you mean the .net tab? I think the problem is u cant reference 64-bit dll like that, since the studio is a 32-bit application. We had the same problem and our solution was to install 32-bit odp.net on our 64-bit machines, and refer instead.

• Photoshop CC 2015 (Norwegian version) will not start. The following message: Adobe Photoshop CC has stopped working.  A problem caused the program stopped fungeresom correctly. The program will be closed and you will be notified if a solution is av

  Photoshop CC 2015 (Norwegian version) will not start. The following message: Adobe Photoshop CC has stopped working.  A problem caused the program stopped fungeresom correctly. The program will be closed and you will be notified if a solution is available.

  reset your preferences-

  Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

  If that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

• Interesting solution of failure of the fans occasionally cold start?

  Interesting solution of failure of the fans occasionally cold start?

  Normally I do a reset of the SMC, sometimes it's the solution.

  When kick cooling fans as soon as I start my cold iMac, I just quickly swivel the iMac slowly from right to left and the cooling fans have stopped.

  Strange?

  All the answers?

  Note: I use an iMac 21 inch end 2013-2, 7 GHz Intel Core i5

  Thank you in advance for the answers.

  This sounds like a sensor loose or pinched wire.

  You may be able to see the problem of sensor or sensor wire with the diagnosis of Apple to test or a third party temp. followed by the application, but the best would be to book a service appointment at your local CENTRE.

  Apple Diagnostics using - Apple Support

  https://locate.Apple.com/

• I tried to solve the problems to the existing solution in this forum. I still get error 50405

  Dear,

  I use USB-6009 for controlling pumps, valves, and two Mass Flow Control. Each two cycle I get error 50405. I tried to solve the problems in the existing solution in this forum, but the error always showing each cycle 2 of the operation. I enclose my VI filled for the expertise, I was wondering if its design issue? Home shot of the error screen. Thank you.

  You have certainly a few design issues.

  The structure of stacked sequence tends to create more problems than it solves. I the have not used in new programs since version 1.2 of LabVIEW (in 1989). A state machine is a much better choice of architecture.

  Local variables can cause race conditions, copies of additional data, poor performance and it is difficult to debug code. There are special cases when they should be used, but these conditions are not in your code. Just wire directly on the terminals of control at the scene, the data will be used.

  My guess on the likely cause of your error is the use of several DAQ Assistant to perform the same task (with different data values) in each image in the sequence structure. With the arcitecture state machine that I suggested above, you would need one. The DAQ Assistant trying to be clever on the configuration and tasks of closing, but different instances do not speak with each other, so they don't know when to release the resources.  You might be able to do work if you used the DAQmx screw standard you have done with the task of digital output.  You do not connect the error lines of the DAQ Assistant for you can be missing errors.

  Indicators and controls without legend may be a troubleshooting nightmare. Please give each control and seeing a unique label. If you don't want the visible label on the front, you can use the properties of the control to hide. If you want multiple controls to have the same visible text for the operator, use the legend.

  Learn how to use subVIs. Most of the code in the 6 images of the structure of internal sequence is identical. By converting only a Subvi, you would reduce considerably the size of the diagram and if you ever need to modify the code, it should only be changed in one place - the Subvi.

  The while loop in frame 0 of structure of outer sequence is a "gourmet" loop He's going to run as fast as possible and seize all available CPU resources until the user presses a button. Put a wait function (ms) in the loop with expectation of ~ 100 ms. best, learn how to use the Structure of the event for user input.

  The second loop inside of the structure cases inside does nothing and can be removed.

  Many of these objects suggest that you have a programming background using the text-based programming language.  LabVIEW uses a paradigm of data flow that avoids largely for things such as the structure of the sequence and the local variables. I recommend that you work through the tutorials online on the Getting Started with LabVIEW.

  Lynn

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• How to fix the windows live mail has stopped working a problem caused the program to stop working correctly windows will close the program and notify you if a solution is available

  In the Middle looking emails from this error appears.  Windows live mail has stopped working a problem caused the program blocking works windows will close the program and notify you if a solution is available

  Hello

  1. do you remember make changes to your computer before this problem?

  Try to start the computer in a clean boot and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

  If the boot fails, you can post your questions about Windows Live Solution Center by clicking on this link: http://windowslivehelp.com/product.aspx?productid=15

• I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000

  Hello! I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000 (longhorn_rtm 080118-1840). I have a problem because my internet is not working because of the adapter, so I'm not able to use your forum solutions requesting that my internet is working. So, can you give me some advice on how to deal with this problem.

  Hello

  Refer to the answer posted by Sabrina Shen in the following link to resolve the problem:

  Map #2 Microsoft Tun Miniport

  See also:

  The problems of Internet connection

  Network connection problems

  Why I can't online?

  Windows wireless and wired network connection problems

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• Cannot install problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.

  Original title: program problem caused to stop working correctly. Windows will close the program and notify you if a solution is available.

  On a number of attempts to install programs on my laptop with Vista home premium OS, I get the message, "caused a problem program to stop working correctly.  Windows will close the program and notify you if a solution is available. "The program closes, but I am never notified a solution, and my attempts to solve the problem have not had any positive results.  Among the programs that I tried to install are not important to me, but I really want to install Blackberry Desktop Software.  Everything seems to go well with the installation until suddenly I get this message.

  Hello

  1. what programs are they?
  2. What are they compatible with windows vista?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Note: To restore your computer to a Normal startup mode, follow these steps:

  1. click on start in the box start the search.
  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• Media Center has stopped working a problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  Computer: Vista Home Edition Premium, SP2

  My media center of windows worked fine two days ago, but since yesterday, it crashes when I try and run it with the statement "Media Center has stopped working a problem caused the program blocking works correctly." Windows will close the program and notify you if a solution is available. »

  I tried to go back to an older restore point, I tried to pick up the .db file, I've seen people say to delete, but I don't even have that.

  This is the error in the event log

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2011-08-09 16:49:45
  Event ID: 3084
  Task category: Gatherer
  Level: error
  Keywords: Classic
  User: n/a
  Computer: rb - CCP
  Description:
  Cannot load the Search.MediaCenterHandler.1 protocol handler. Error description: a server error has occurred. Verify that the server is available.  .

  The event XML:
  
   
     
      3084
      0
      2
      3
      0
      0 x 80000000000000
     
      380048
     
     
      Application
      RB - CCP
     
   
   
     
     
      Search.MediaCenterHandler.1
      A server error occurred. Verify that the server is available.
   
  

  Hello

  I suggest you follow the methods and check if it helps.

  Follow the steps below and check if it helps.

  (a) exit any running instance of Windows Media Center.

  (b) delete the mediaCenterDataStore.db file. By default, this file is located in the following location:

  %SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB

  To remove the file, follow these steps:

  i. Click Start and then click Run.

  II. in the Open box, type run and then click OK

  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

  III. in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.

  IV. in the details, click pane right mediacenterdatastore.db and then click on remove.

  c. click Yes to confirm that you want to move the Mediacenterdatastore.db file to the trash.

  (c) start Windows Media Center.

  I hope this helps.