solve the problem of network

Similar Questions

• How to solve the problem of NETWORK card after v2v migration

  Help, please

  Hi please proceed in attached document reading

  Please let me know again facing questions about the present...

  Thank you...

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• I have a compaq presario cq57 notebook pc and my wireless is not solving the problems of work said that the access point and wireless network card works I need help to fix this please

  the internet works only with the ethernet cable and not wireless. I have service with comcast.

  Hi, Antonia.
  Thanks for posting your question on the Forums of community of Microsoft.
   
  1. do you get an error message?
  2. don't you make changes to the computer before the show?
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  Check out the link and follow the steps in the article:
  Troubleshooting your wireless network and Internet access (Windows 7)
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02543015#n55

   

  Method 2:

  Reference:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Hope this solves the problem

• HP 8150 printer does not print error: Re-installing the printer, unplug the USB and power and re-boot do not solve the problem

  Original title: hade 8150 printer does not print

  Under Vista Home Premium with all updates. The printer is a Photosmart 8150 H - P, which worked well for a few years. Now, when you send a document, for example, a Test page and looking at the queue, I immediately get an error. Re-installing the printer, unplug the USB and power and re-boot do not solve the problem. Grateful for any ideas. Thank you

  Hello

  (a) don't you make changes to the computer until the problem occurred?

  (b) when was the last time it was working fine?

  (c) you use a network printer or local?

  I suggest you try the steps below and check if it helps

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information is helpful

• Ghost of the sent emails from my email using my account, I guess that what needs to be done to stop or solve the problem?

  Ghost of emails sent from my email address. sent from my address book full. What does take to stop or solve the problem?

  Two things may apply here.  The first is that, in fact, someone stole your credentials because you signed in to your mailbox using a public hotspot.  If you can still access your mailbox with a web browser, on a private network (such as your home network) and change your password to something complex and unguessable, using at least 10 characters, the characters being a combination of uppercase and lowercase letters, numbers, punctuation or special characters.  Who must thwart those who have stolen credentials, denying them access to your mailbox.

  The second thing that can apply is that your box to the letters is safe, but your address was hacked, which means that spammers are using their own mailing envelopes but by specifying your e-mail as well as the mailing address, something that is very easy to do something that happens to almost everyone who allows their address be visible in a public forum (such as Facebook or an online discussion group).  This case if it is a serious problem and not a threat to you.  Since spammers change mailing addresses frequently, they will move to use yours.

  You can usually tell the difference between these cases because in the first case, you would probably lose access to your mailbox because the spammer changed your credentials based on himself.  It's a problem that you need to address with your e-mail service provider.   You can also see evidence of the compromise because targeted friends can send you copies of the messages they received, and you will be able to confirm from the message turned headers to your e-mail service provider's network.  The latter manifests mainly because you will begin to get NDRs to addresses that you don't recognize or are clearly fake.  In this case, just remove and stop worrying.  They will stop after a while.  Even still, it is always advisable to change the passwords to your services online all the months to protect against the compromise.  Tools like lastpass.com are beneficial to help keep you straight.

  Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• How to solve the problem of "connection not identified with local access only".

  I have followed through certain methods, such as uninstall and reinstall the drivers for the wireless card, but they do not solve the problem. All the other home PC can establish access to the internet via my connection named wireless. Only this PC cannot access the internet through it to connect wireless.

  The PC can be connected via Ethernet only.
  OS: Windows Vista Home Edition
  Modem & router: DPC3825 Cisco
  If you need more information, please let me know.

  Thank you.

  I would have had to provide the PC model and specified network card.

  Models of Compaq C700 with Atheros AR5007.

  I tried the latest adapter driver for my Compaq site specific model. The pilot, which is planned for the model, has not solved the problem. However, I still watched the pilot for the adopter with "Atheros AR5007" as a keyword and finally found the driver that was updated in 2010, although that provided for different models of the Compaq site.

  Once the new driver has been applied, my PC works fine now.

  Thanks for help.

• Can not solve the problem "Windows could not find a certificate...". ».

  I read through all the posts related to "Windows could not find a certificate...". "but still failed to get a solution for my problem.

  Well, I have no problem with the installation of this modem to router Wireless G ADSL2 + for both my notebooks of Vista, they work perfectly.

  However, I have difficulties with 2 other computers that move on the XP version. This version XP 2 PCs sometimes show the connection of the signal very strong to my network and sometimes simply shows "Windows could not find a certicate to connect to the network.

  Even when it indicates strong signal to my network connection, I can still surf the internet/LAN.  Where is the problem?

  Can anyone help?

  Thanks for the reply.

  Nonetheless, I have chosen the way easier and solved the problem.

  Connect the network cables for these 2 not for PC XP update and they work just as perfect as my other 2 portable VISTA wireless.

• Can someone help me solve the problem APPCRASH on Windows 7? The problem occurs after installation of Office 2010

  Hi all

  the OS is Windows 7 SP1 32-bit Enterprise Edition.

  I use an important banking software package called ORF more than Misys, the application is critical for the company, the problem occurs after the installation of Microsoft Office 2010 Professional Plus with Service Pack 2; the ORF more crashes when you try to print to a PictBridge compatible printer.

  I get the following message from crash:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: orfplus.exe
  Application version: 5.0.1.0
  Application timestamp: 3f6f479b
  Fault Module name: StackHash_802d
  Fault Module Version: 6.1.7601.22436
  Timestamp of Module error: 521eaab0
  Exception code: c0000374
  Exception offset: 000c38b7
  OS version: 6.1.7601.2.1.0.256.4
  Locale ID: 2057
  Additional information 1: 802d
  More information 2: 802d0d721d077b7993d17470b8164201
  3 more information: d6a2
  Additional information 4: d6a2e9e6b15ae70428294b9407d7e88d

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  ----

  I tried to exclude the orfplus.exe of the DEP, but that does not solve the problem, the application always crashes when I try to print a report.

  ----

  As a result, we are unable to upgrade our office staff of Office 2010 Professional Plus application.

  I appreciate if someone can help me solve this problem.

  Thanks in advance.

  Hello Matt,

  According to the issue description, it seems that you are connected to a network domain, so I suggest you to republish your query on the TechNet forum and I hope that you will receive a response it a better way that they are trained on the computers in the domain and their settings.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you.

• When I download Apps, I get a download error 'undefined '.  I followed the instructions to delete the OOBE, which did not solve the problem.

  When I download Apps, I get a download error 'undefined '.  I followed the instructions to delete the OOBE, which did not solve the problem.

  Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application

  If you have found and deleted files oobe and who could not solve the problem, check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• How to solve the problem of Oracle SQL Developer Connection?

  People,
  
  Hello. I use the Oracle 11 GR 1 material database. The database https://localhost.localdomain:1158 control console / em works correctly. I can create a database and a table with success.
  
  My OS is Linux and connects to the internet successfully.
  
  In order to execute SQL statements. We use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
  
  Connection name: DB1 (is my database name)
  User name: SYS (this is the user name I used to connect to the Console)
  Password: SYS (this is the password used to connect to the Console)
  Connection type: basic
  Host name: localhost
  Port: 1158
  SID: DB1 (it is created during the installation of the database)
  
  But the error message: "status: failed - IO exception Connection Reset."
  
  Can any folk tell me how to solve the problem of Oracle SQL Developer Connection?

  user8860348 wrote:
  People,

  Hello. I use the Oracle 11 GR 1 material database. database Control Panel https://localhost.localdomain:1158 / em works correctly. I can create a database and a table with success.

  My OS is Linux and connects to the internet successfully.

  In order to execute SQL statements. We use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:

  Connection name: DB1 (is my database name)
  User name: SYS (this is the user name I used to connect to the Console)
  Password: SYS (this is the password used to connect to the Console)
  Connection type: basic
  Host name: localhost
  Port: 1158
  SID: DB1 (it is created during the installation of the database)

  But the error message: "status: failed - IO exception Connection Reset."

  Can any folk tell me how to solve the problem of Oracle SQL Developer Connection?

  user name: sys
  password: enter_your_correct_password given at the time of the installation of oracle

  role: select sysdba if you would connect as sysdba otherwise select normal for users other than the sys

  HostName: Enter your ip or hostname of the oracle example server address:-192.168.11.12

  to find the terminal/command prompt open hostname in oracle installed machine
  type---> hostname

  type ping hostname--->

  You can find the IP address of the server

  Port number: 1521 (default)---> I guess, otherwise check the port number in the file tnsnames.ora under your ORACLE_HOME/network/admin folder

  SID: DB1

  try it
  Good luck

• Plugin Adobe Flash keeps crashing, and or refreshing it or Firefox solves the problem.

  I tried to update Adobe Flash and reload also Firefox but nothing has solved the problem.

  You have already disabled the functionality of the protected mode? This feature has the security benefits, but it seems to have serious compatibility problems on some systems. There is a hidden parameter to disable; I suggest to try it for a day to see if that helps you:

  (A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (B) in the search above the list box, type or paste the flash and make a pause so that the list is filtered

  (C) double-click the preference dom.ipc.plugins.flash.disable - protected mode to change its value from false to true.

  It cannot take effect until all the Flash was discharged for a few minutes, or you close Firefox.

  One of your crash signatures (_SEH_prolog4) reminded me of a thread where a user was very persistent problems with Flash on YouTube if Webroot and LastPass were both installed. It seems that you run Norton, so that the thread is probably not directly relevant.

  Would you consider trying the "Extended Support Release" of Flash version instead of the version 18? Adobe is now updated with security patches, but some recently added features Flash would be absent.

  If you want to try this, you will need to use Adobe uninstaller to remove the current version (link in: Flash Plugin - keep up-to-date and solve problems) and then get version 13.0.0.309 from this page (scroll down about 2/3 of the way):

  https://www.Adobe.com/products/flashplayer/distribution3.html

  Choose the EXE or MSI for 'plugin browsers.

• Firefox 34.0.5 cannot print correctly. I checked all the pages on firefox problems and still can not solve the problem.

  I use 34.0.5 with Windows 7 and that you cannot print correctly. In print preview, it appears in a label size. I double checked all my settings in firefox and my preferences from the printer, I checked all the pages on firefox problems and still can not solve the problem.

  I was able to finally solve the problem, but I had to do a complete reset of firefox. Thank you for your time.

• I put my yahoo homepage, but every time I open mozilla home page is webssearches I reset firefox, but it does not solve the problem, what to do now?

  My homepage is set to yahoo, but mozilla opens with http://istart.webssearches.com as start page. Same reset does not solve the problem. I think that I have installed a software that installed this. My default search engine is Google. Kindly help me, is there something to do in all: config?

  See this tutorial - http://malwaretips.com/blogs/istart-webssearches-com-removal/

• Google Calendar becomes inactive in Firefox. Reset Firefox solves the problem for some time (sometimes minutes), then it becomes inactive.

  Google Calendar becomes inactive in Firefox. Can not navigate, cannot change the appointments, can only view an appointment, then freezes and nothing is more possible.
  Reset Firefox solves the problem for some time (sometimes minutes), then it becomes inactive.
  Firefox 28.0, Windows 7.
  Google Calendar is OK in Android and syncs with my PC OK.
  Works fine in Internet Explorer.
  Please notify.

  The extension Freeven pro is probably the problem. Only that disable and check again.

  If you have the same problem after having disabled the extension pro Freeven then, disable graphics hardware acceleration.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  In safe mode hardware, acceleration is disable by default.

  Thank you.