With Tungsten E2 Bluetooth headset

Similar Questions

• compatibility problem with LG HBS730 bluetooth headset

  I am running Win 7 on my desktop computer that has a generic Bluetooth dongle. The system sees the LG HBS730 and install the drivers.

  As soon as it is finished, it goes to the 'blue screen of death '.

  Any suggestions as to what is happening. I contacted LG and they said that it was probably a Windows problem. Thanks Bob

  Hi Bob,

  It would have been really helpful for us if you had mentioned a couple
  things like:

  1. What is the brand and model of your computer?

  2. What did the dump file of the BSOD say what the contents of the file: "c:/windows/minidump" which records why the PC crashed?

  Nevertheless, here are some steps we can try:
   
  Step 1: Remove/uninstall/delete (NOT disable!) all Bluetooth objects of the
  installed the software and the Device Manager again.  Reboot - only-
  After that everything is removed, since it should try to reinstall on reboot.
  Step 2: Allow the Microsoft drivers install.  Reboot only if necessary.
  Step 3: Test with your latest drivers (downloaded from your manufacturing
  Web site of the manufacturer).  If this does not work, you can go back to
  step 1 and start again, but it is preferable to use the drivers from the manufacturer in this case
  If it works.
  3.1 - installation of the factory drivers.
  3.2 - if requested reboot.
  3.3 - follow pairing instructions below.
  3.4 - if it worked, the Audio playback value for appropriating the Bluetooth device and enjoy.
   Don't forget that YOU CANNOT SAVE BLUETOOTH UPSTAIRS
  AUDIO QUALITY IS IN USE!
  3.5 - if it doesn't work, go back to step 1, and then
  jump all the elements of step 3.
   
  How the coupling device:
  Step 1: Bluetooth open Places and start
  looking for devices with the headset POWER off.
  Call button of 2:Hold a step while turning
  headset and continue to hold until the headset in pairing mode.
  Step 3:Stare to the computer screen and wait it indicates upward.
  Step 4:When, it turns out, pair and connect.

  NOTE: You must make sure that your Bluetooth 'dongle' and its
  driver / Protocol can do A2Dp (Advanced Audio Distribution Profile).
  

  Hope this information was useful. Please answer us back if you are having trouble.

• Bluetooth headset | Impossible to re-pair the device after deletion

  I have 2 fields, one for my wife and myself. I've matched with success the pre of my wife with a stereo bluetooth headset Altec Lansing/Plantronics Backbeat (new) (model BBT903/R). Then I tried to pair it with my pre but it wouldn't recognize it. I have read the help file for Bluetooth on the meadow and realized that I had to remove the association with the front woman first. The help instructions supposed to remove the device to PRE Bluetooth screen name (device name of point culminating right drag, click on delete). I did it on Pre my wife. I then tried to pair with my pre but had the same problem - the machine is not found. Tried again on my wife before and now it not pair either!

  Now I'm stuck. The helmet is not recognized by a meadow. I tried to turn on/off BlueTooth. I tried to change the order in which I turned on devices (first helmet, second pre and vice versa). I tried the hard reset by removing the PRE battery and put it in. I would do the same for the helmet, but the battery is not removable/accessible.

  With the Plantronics / helmets Altec Lansing, you must press the button so that it flashes Red and blue (and alternates)... the flashing blue means it's looking for a connection to a device with which it is already associated. Hope that helps.

  Message edited by dayres on 07/06/2009 09:15

• Cannot be used on Windows 7 Sony bluetooth headset because the driver is missing.

  Original title: Question about bluetooth drivers

  Hello

  I have a problem with my Sony bluetooth headset on my Macbook bootcamp Win 7.

  My helmet model is MDR-10RBT. My Win 7 detected the headset in the bluetooth device section, but I can't use it because the driver is missing. (There is an exclamation mark in the bottom left of the icon) The headset works fine when I start the o/s under OSX tho. I have already installed to the disk of bootcamp, nothing helps.

  http://store.Sony.com/premium-Bluetooth-wireless-headphones-zid27-MDR10RBT/cat-27-CATID-all-headphones-earbuds

  I went here and it seems that there is no driver. I sent them an email and support confirms there is that no driver is not providing them.

  ----------

  Please note that pilots must be pre installed in your Microsoft windows 7 OS. If your machine is not with the drivers, that we invite you to contact Microsoft because they are not available for download from Sony.

  ----------

  How can I download the drivers for Windows? I don't know how to start.

  Any help would be greatly appreciated.

  I had the same problem, but I solved the problem thanks to HP, because I have their laptops for business.

  Their bluetooth device driver was not active and up-to-date.

  As expected, it was Found HP. supported drivers for my particular model and the version of windows on the HP website and found the latest driver for bluetooth device. I had the version dated May 2015, and my headphones worked great after that.

  In your case, you will have to hit Apple door my friend.

  The problem of its material for sure. Please contact the service exceptional customer called Apple.

  After that all Macs have never no problem, you paid the higher price for it. : Pei

• Pairing Bluetooth headset with Apple Watch 2 series?

  Hoping that someone here has some good ideas, so I can avoid having to go through the centre commercial/Apple Store!

  Bought a watch series 2 the day of the launch, immediately tried to pair with the bluetooth headphoens I got (AvierBTE somethings). No luck. Thought maybe I just got bad headphones - but they always associate with my iphone 6 s. bought a pair of Mswift Pow helmet off Amazon and bluetooth headset at the same time borrowed a friend this pair with its original Apple Watch. My Mswifts, or his headphones will pair with my watch, although the two pair with my iphone.

  My watch IS pair with my amazon echo - so I know the bluetooth works.

  The watch is the headset in discovery mode, but when I try to pair, it gives an error and says it cannot associate, check that the camera is turned on, in range, etc..

  Another person had problems of this kind and has managed to find a solution?

  Hello

  Make sure that you follow the instructions for pairing here:

  Use the Bluetooth with your Apple Watch - Apple Support Accessories

  It can help to turn off pairing your headphones for your iPhone (or any other device that they can already be coupled to) before their pairing at your watch.

  It can also help when you try to pair your headset with your watch, to move the two devices to another place, away from any device Bluetooth can be active.

• Can't associate my Sennheiser Bluetooth headset with my Verstuurd vanaf mijn IPad Pro and IPhone 5 s

  Can't associate my Sennheiser headset to my Verstuurd vanaf mijn Ipad Pro and my IPhone 5s.

  They ore well on my IPhone 4S and the Ipad 2.

  whatncan deceive you?

  to associate a bluetooth headset device that it has not been paired with before putting the headset in discovery / pairing mode your sennheiser manual should describe how you are going to do

• You can control volume with bluetooth headset and the new Apple tv?

  Hello community!

  I have a new Apple TV and I'm watching tv and movies series, but the only way I can do it is night. I don't want to disturb my family, so I was wondering if I can watch it with a bluetooth headset and control the volume. What I mean is if I can have a very low volume on the TV but more volume on my headphones. I can do with my PS4, but I have most of my movies in iTunes.

  Thanks for any help you can provide.

  You cannot output audio to the tv and the headphones at the same time if that's what you're asking. However, you will be able to control the volume of the headphones using the distance of Siri.

• firmware for the iPhone bluetooth headset original work with the 5s iPhone

  Hello to our community,

  I have a beautiful original apple iPhone Bluetooth Headset model n °: A1221

  This helmet does not work correctly.

  When I connect the headphones to the computer (iMac 27 "mid-2011, el Capitan 10.11.3) with the original Headset USB travel cable, headset LED is bright orange and the LED color changes to green after a few minutes.

  When I disconnect the headset no lights are bright and the headphones does not work.

  After charging more then 1 hour the same answer.

  When I put the headset with the USB cable connected in my ear, I can hear the sound signal very low volume of pitch high e. When I push and hold the button of the headset tone is stronger.

  When I disconnect the cable, the helmet is instantly dead, no lights, no sound, nothing happens when I push the button on the short headset, for a second, four seconds, 10 seconds or even longer.

  Is there a possibility to reset? A new firmware? An Exchange program? Any help?

  Max

  The helmet has been abandoned, I think that 2009. So, it's long after the warranty. BT headsets have come a long way since then. The Apple headset does support A2DP, now standard. I he write off and buy something current.

• What BT dongle to activate the microphone with Bluetooth headset?

  Hello

  I recently bought a Bluetooth headset stereo with microphone so that I can use it to make calls from Skype (VoIP) through my Dell Inspiron laptop with factory Toshiba Bluetooth stack.

  I could pair and connection between my laptop and the headset (Plantronics 590 A), but can not get the microphone to work. I spoke with the helmet provider who said the following:

  If your computer has generated in Blue Tooth, it must support audio handsfree and A2DP profile. How you can find out is to go to start, programs, accessories, entertainment, select sound recorder, change, audio properties, and he has to say under sound, playback and sound recording or high quality BT or BT stereo if it's not you, it will take a dongle that supports the profiles of school boards.

  Mine said 'wave of Toshiba Bluetooth".

  They said that they could not recommend third party products. Therefore, I would be very grateful if someone could tell me what kind of Dongle that I need to solve this problem and ideally suggest where I could get one of (I'm in the United Kingdom). Thank you very much.

  Dewi.

  You should take a look at the following Web site. It should solve your problem:

  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/FAQ.html
  "Why my microphone work?

• Qosmio G20: How to disable/bypass SCMS-T for adiosyn with a bluetooth headset?

  Hello all,.

  I recently bought a set of bluetooth stereo headphones (Creative CB2350) and found that, because of the inclusion of SCMS-T copyright protection I can't audiosync directly to my computer laptop bluetooth stack (Qosmio G20). The headphones come with an audio jack adapter (bluetooth transmitter), but it runs on a single AAA battery and cannot last more than an hour; So I need to connect without it.

  Is there a way to disable or circumvent the requirement for protection by copyright SCMS-T in the last toshiba bluetooth stack? and if not why not? I paid a lot of money for my Qosmio and my helmet and I'm leaving furious inclusion deliberate software/firmware designed to keep me from using my material for legitimate purposes (i.e. what they were designed to do).

  Please help me,
  Lee ([email protected])

  PS: Frankly I didn't really a problem with DRM technology before that, but now I can see how irritating and pointless DRM is. Compare the number of people using bluetooth devices for piracy (negligible) number of bluetooth headset that does not support the MAN - T (a lot if all my google searches are anything to go by) and see you how stupid the idea of DRM via bluetooth is really.
  In my opinion not so humble large commercial companies like toshiba should woven converluted pap as SCMS-T as a matter of appeal; the final user does not want to spend several years download licenses and scouring the web only to find out access to his material is totally useless. (Sorry for the rant, but that's how I feel).

  You're right, I completely agree with you.
  The problem here probably that Toshiba is a little anxious summer continued in the music industry, if users use technology to copy copy-protected music.
  I think that it should be possible to transfer the responsibility of the end user by some sort of agreement, that the user must confirm once by a mouse click during installation.

  I already had a discussion with Toshiba customer service on this issue. They informed me that they reconsider this issue and try to find a solution for this. The odds are so good
  that a future version of the BT-stack will be the ability to disable the GUY.

• Nokia Bluetooth headset works only with the HP Slate7 voice tab

  I have a pair it again with HP Slate7 voice tab / Nokia BH-112, who previously worked and now it does not work once I have disable pairing. Any solution?

  I solved it by myself.

  I disabled the bluetooth in my voice Slate7 tab.

  I put the bluetooth headset turned off.

  Yet once, I turned on the bluetooth headset and long pressed the power button on the bluetooth headset and at the same time I activated the bluetooth in my 7 Slate voice tab.

  She connected immediately and associated.

  Thank you all for your suggestions

• Cannot get Plantronics bluetooth headset appears as reading or a recorder in Panel - > sound in Windows 7 with Lenovo ThinkPad

  I installed a Plantronics Voyager legend UC bluetooth headset to my work provided Lenovo ThinkPad laptop computer running Windows 7. The helmet looks like a device in the Panel--> devices and printers. However, it does not show as a device in the control--> tabs sound playback Panel or registration.  I need the headset to the playback device for my work-VoIP phone.

  I tried to remove the helmet and reinstall, but I can't delete it in the Panel--> devices and printers. When I locate and right click, remove or uninstall is not an option. I went to the control panel--> Manager--> audio video devices and game controllers, which are there and uninstalled. I then unplugged the connector of the headset, and the headset powered off and rebooted. I then plugged the connector UBS back in and turned the headset. The PC began to reinstall the drivers, but the headphones still did not appear in the sound tabs.

  I have been all over the internet trying to find a solution to this problem and so far have not been successful. I spent hours on this and it shouldn't be so hard, but it turns out be. I appreciate any help you can provide.

  Thank you!

  Thanks for your reply Mann. Here's the answer to your questons.

  1. Were you able to use this helmet earlier on this computer? Answer: Yes, it didn't work and appeared in the reading tabs and the recording of sounds. However, I accidentally deleted it--> sound when I was trying to troubleshoot why I couldn't hear the narration in the course of eLearing played on our intranet via the headphones. I only meant to change the settings so that I could make the speaker/HP the default device. BIG MISTAKE because now I can't get it to reinstall and appear in the tabs of playback and recording.
  2. Have you checked to connect the headset to any other computer, it works on other computers? Answer: The only other computer I have is an Apple MacBook Pro. I plugged the USB connector to the PC and seem to work although I can't do a one-to-one comparison.
  3. You said that Windows has started to install drivers automatically after connecting the headset and the computer restarted after the removal of noise, the video controller and game, was the driver installed successfully? Answer: Yes, but it just does not appear not liked as an option in the tabs of playback or recording.
  4. Other audio devices work fine on this computer? The only other device is the computer speakers and they work fine.

  Regarding method 1. I had already installed and run the file MicrosoftFixit.Devices.exe that you provided even if I ran again and this has not fixed the problem.

  With respect to method 2. I checked and show disabled devices is checked. The only other devices in playback and recording are speakers/HP and Realtek HD Audio Output 2.

  UPDATE! I removed the USB of the headphone connector and plugged into the MAC, and then removed the Mac and plugged into the PC, that is! The helmet now presents itself as an option in the tabs of the reading and recording. Yes! I was able to select it and set as device by default, tested the VoIP phone and it works all! Phew! I was about to give up on the VoIP phone. Thank you.

• Bluetooth headset with Cisco IP phones

  Hi all

  A client tries to connect a headset bluetooth Plantronics Savi WT/1 t with a Cisco 7940 IP phone and it seems to work very well when he receives a call and press the button 'phone' at the bottom of the phone. However, he wants to be able to walk outside his office and be able to receive calls by pressing the button on his bluetooth headset but the button is not admissible. Is there a way to configure that? I have the impression that the button on the helmet and the helmet on the IP phone button would somehow be synchronized but I don't see how that's possible. Someone has configured an earpiece bluetooth with a Cisco IP phone and have this feature work?

  Thank you for your help in advance.

  Hello Asad,

  To make this work, you would need a number of things;

  -a phone that supports HHC (headset hookswitch control) such as

  Cisco 7942G, 7962G, 7945 G, 7965G, 7975 G

  -the right to work with the Savi Plantronics cable, it would be

  connect to the port on the bottom of the phone and works together with the

  with the HHC funtion (enabled) on the config of the phone in CUCM

  -minimum sr7 CUCM 4.1 (3)

  I can't find the model of Savi, you're connected, but if you could check the exact model

  number/name we could provide more details.

  See you soon!

  Rob

• BlackBerry smartphones can not get a stereo Bluetooth headset to work with Pandora

  I have a BB Storm 9530:

  Is it possible to get a stereo Bluetooth headset to work with Pandora?  Or it only works with the 3.5 mm headphone and internal speaker?

  I use my headset for Moto Rokr BT very well with Pandora. While the music is playing, try to hit the button options and see if you get an option to transfer to Bluetooth

• Cisco IP Communicator with Bluetooth headset has fast battery drain

  Hi all, hoping to exploit the collective knowledge here to find an answer to a question that we live with bluetooth headsets with quickly draining the battery.

  Environment: We run Cisco UCM 10.5 and have some users with Cisco IP Communicator 8.6.4.  Computers are a mixture of office/computer laptop with Windows 7 32/64 - bit.  Most are bluetooth headsets, Plantronics Voyager legend UC with some older models of Plantronics.  These use a bluetooth dongle separated with flag State.  This helmet is announced as having 7 hours of talk time and 10 days standby.  Plantronics software is set to Audio enabled detection and headphones to maintain for PC connection as it is disabled.

  Behaviour: Normally, when the bluetooth headset is not in use, the light blue and the helmet is considered as standby.  When a call, the indicator light is a slow blink showing the helmet is in active use.

  Question: When not in a call, or when the CPIC is even launched, the indicator light is a blue blicking and users can hear 'air' in the helmet, even when not off the hook.  This led the helmet to be in Active mode and thus draining the battery at a higher rate.  Even if option software Plantronics headphones maintain link PC is off, it acts as if it was.  The only way that we were able to work around this problem is in the Plantronics software to disable Audio detection enabled.  This leads to the user needing to press the answer on the headset button and the answer button on the software phone which isn't ideal if users are up and on.

  So having said all this, is there a resolution to allow the headset to use with CPIC without the helmet being still active?

  It comes to video over IP, please move to the appropriate area.