[SOLVED] Cannot pair Z10 to a Linux machine

Similar Questions

• Cannot match the Z10 to a Linux machine via USB (OS 10.3.1) - ok pairing with wifi

  Hello

  Whenever I run the Device Manager and try to pair with usb I get a "could not connect! Unplugged device or can not be detected. When I connect the usb cable, a new network connection is created in the 169.254.0.X subnet.

  I can pair it correctly using wifi.

  I remember during the pre 10.3 era, there was a 'mac' option that did the trick. I missed something?

  Thank you

  Problem solved.

  For others using NetworkManager, that's what I did:

  1. Open the connection editor and change the connection that corresponds to your BB device.
  2. Go to the IPv4 tab
  3. Method of manual adjustment.
  4. Click Add and the value 169.254.0.2, 255.255.255.0, 169.254.0.1, address, netmask, gateway, respectively.
  5. Click on the routes > Add, and then set it to 169.254.0.1, 255.255.255.0, 169.254.0.1 1 address, netmask, gateway, and metric respectively
  6. Click Ok two times.

• Cannot pair Z10 to computer window 10

  I tried to follow ""https://developer.blackberry.com/native/documentation/dev/tools/create_a_target.html " this tutorial on matching braces (which is in development mode) via USB or wifi (both don't work)." I get this error "could not connect! Unplugged device or can not be detected. "When you try to connect via the USB port. I am connected to mix if it matters

  Development mode has been activated for the ping?

  169.254.0.1 must be the address of the device when connected via USB.  You will need to use a different address for the tests on the WiFi.  To view this address go to settings, About, network and use the address of the WiFi network.

  If these are the results when the device is connected via USB something on the machine is blocking the connection.

• I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this. "

  I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this...» He does not drive partition root to copy don't know why his account right there.

  I solved the problem myself... This is because the Version of Vcenter Converter. I'm using Vcenter Converter 5 to P2V a server Linux RHEL5.2, its not supported by Vcenter Converter 5. That of why I've done P2V using Vcenter Converter5.2 and accomplished.

• You can create a view that filters (ESX host) Linux machines on the view of the Infrastructure?

  Hello

  We have recently implemented Foglight and VMware plugin. As part of the VMware plugin, Foglight pulls in all the Linux VM machines including the ESX host. Our team of Linux only manages the running redhat Linux hosts. They fail the ESX VM guest. That said, is there a way to create a view that shows only the hosts running redhat Linux?

  For example the view of rail infrastructure below contains 88 Linux machines, but nearly half of them are ESX hosts for our Linux team would not see all these. Is it possible to filter these?

  

  Any help is appreciated.

  Thank you

  Tony

  The easiest way would be to create a personalized, pair it with Infrastructure and then create a dynamic management component.  This will help create you a rule for "All hosts" where you can find just the hosts that are not of the ESX host and run Linux.

  The query would be:

  detail.topologyTypeName! = "VMWESXServer" & os.longName like «% Linux»

• Unable to connect my Linux Machine database

  Dear all,

  Hope you will be fine.

  I'm having a problem to connect to PL / SQL Developer with my database available on the Oracle Linux virtual machine.

  I have a windows 7 installed on my PC, I have installed a virtual machine and install oracle 11g on this machine. I have a database named orcl on this and I am trying to connect to the database with my windows machine. I assigned ip appropriate to both computer and created under the setting mentioned in my tnsnames.ora file. But when I go to connect it shows error ORA-12203: TNS: unable to connect to the destination. Please guide me where I am doing wrong so I'll do it properly.

  ORCL_11G =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS =

  (COMMUNITY = tcp.world)

  (PROTOCOL = TCP)

  (Host = 192.168.0.100)

  (Port = 1521)

  )

  )

  (CONNECT_DATA = (SID = orcl)

  )

  )

  Kind regards

  Atif Zafar

  Thank you all for your help. I solved this problem by mentioning the HOST in listener.ora and tnsnames.ora files. In fact, I have to assign the static IP address of my Linux machine and unfortunately not to mention the IP address in my two files. It is show HOST = localhost this is why it is forbidden to connect with the other machine. Now I connected successfully and it works fine now.

  You mention linux machine IP here.

  ORCL =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS =

  (COMMUNITY = tcp.world)

  (PROTOCOL = TCP)

  (Host =192.168.0.100)

  (Port = 1521)

  )

  )

  (CONNECT_DATA = (SID = orcl)

  )

• VMware Consolidated Backup, LInux Machines go read-only

  We have a strange problem, the scenario is as follows:

  3 knots x 3650, hba qlogic, Vmware 3.5 Update 4

  1 SATA ds3400 dual ctrl

  1 x 3650 dedicated to the VCB nodes

  A lot from time to time, virtual Linux machines, VCB has completed the backup, rest with the read-only file system, the only chance to solve the problem is to restart the virtual machines: we already checked the vmware tools and are all up to date.

  Any suggestions?

  Thank you very much

  As a general rule, it is not realistic to adjust the waiting times for the LSI or buslogic drivers scsi as they would need to be recompiled. To my knowledge there is no kernel option, you can pass to them on this issue. Some versions of redhat specifically deal with it is bad and flipping in read-only mode. I think RHEL 4 U4 and precedent are touched by this, U5 has been set, and the problem was inexplicably re-introduced in U6 (I hope those updated numbers are right, I have to look back through my SRs to understand). If I were you, I would look at the upgrade to vSphere 4 that has a couple of cool things.

  1. new options scsi (LSI SAS, paravitual SCSI driver pvscsi virtual controller)

  2 VMFS 3.33 (which will require you to reformat your LUN with the new VMFS however) has up-to-date SAN attempts, which means that wait times do not necessarily make the LSI/Buslogic controller in the first place and will be dealt with at the level of the VMFS layer. It is possible that you could put a LUN with the VMFS 3.33 using host vSphere 4.0.0 and not spend the rest of your hosts, but I'm not positive on this one here.

• Convert the physical Linux machine with VMware Converter Standalone 4.0.1 on VMware Workstation

  Hello

  I work in a virtualization project, now I test and I want to test the new version of the converter, because I need to convert some Linux machines and I know that with this version is not difficult.

  I do not have the ready virtual infrastructure so I test on a workstation environment. I would like to know if someone has converted a physical Linux machine to virtual and if the destination has VMware workstation 6.5. I know that this is not supported, but this does not mean that you couldn't do.

  When I have to specify the type of destination, I got the error that you could see on the photo.

  Please let me know if you have tested this before and you know how to solve this problem.

  Thanks in advance!

  See you soon

  Malulas,

  Welcome to the Community Forums.

  To do a physical to virtual conversion, you MUST GO to ESX.  It is a requirement under the guidance of the user manual.

  If the virtual machine was already in ESX, you might be able to export to a workstation image while the ESX VM is powered off.

  Sorry for the bad news.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• I cannot pair the new Apple TV Remote app with my first generation Apple TV.

  I cannot pair the new Apple TV Remote app with my first generation Apple TV. Someone knows what to do?

  You can use the old, now called iTunes Remote? A new one seems really targeted to ATV 4.

• Is it possible to install HFM in LINUX machine

  Hi all

  Is it possible to install HFM in LINUX machine.

  Some of them tell us that we are not able to install HFM in linux machine.

  To my knowledge I want to know if it is possible to install HFM in LINUX machine or not.

  Please help me on the same.

  Thanks in advance

  Concerning

  Satheesh.S

  Hello. Yes, you can run HFM 11.1.2.4 on Linux with Exalytics material. Earlier versions will not work on Linux.

  Eric

• Pop - ups without closing after downloading files using webutil_file_transfer.client_to_as_with_progress on linux machines

  We have an Oracle application that runs on windows and linux machines based on the forms. Application server is database to Oracle 11 g and 10g.

  There is a feature of the application where the user can download his files to the application server, as well as in the database.

  When transfer us files by accessing the application in windows (Internet application), and then download the feature works very well.

  When we transfer files by accessing the application on linux machines, then also download files get stored on the database and application server and features works.

  However, as soon as the download starts a pop-up is launched by displaying the message like "upload to the application server is in progress."

  These pop - ups are not get closed even when the file is downloaded to the application server.

  Can you please let me know how to deal with this behavior

  Application server is database to Oracle 11 g and 10g.

  And you release Forms?  We can only "Assume" you use form 10g since you are using Oracle Application Server (OAS) 10g.  But of course you "Assume" you use OAS 10g since you specifically mentioned.

  Since you have a deployed Web app forms, it would be also useful to know-your-client Java and browser versions.

  We have an Oracle application that runs on windows and linux machines based on the forms.

  When we transfer files by accessing the application on linux machines, then also download files get stored on the database and application server and features works.

  However, as soon as the download starts a pop-up is launched by displaying the message like "upload to the application server is in progress."

  WebUtil is a single library of Windows.  While some of the methods in the library will work on non-windows clients - they are not guaranteed to work on non-windows clients.

  These pop - ups are not get closed even when the file is downloaded to the application server.

  Since you are actually able to get this method to work, I suggest you check the version of the Client operating system and if it's Windows, use the Client_To_As_With_Progress() method and if it's not Windows, then simply use the Client_To_AS() method.  The other option would be to implement a Javabean to file transfer (A FTP Java Bean - Oracle Forms PJCs/Java Beans) in your form that works with any version of operating system Client.

  Craig...

• SDCLI command not working only not on a linux machine?

  I installed sql developer 4.1 and jdk1.8.0_45 on a linux machine. I'm in the directory/opt/sqldeveloper/sqldeveloper/bin and shot 'sdcli' command to run the unit test. but get error command not found. I ran test cases on windows with the command 'sdcli' machine of the same file and it worked. Why it does not work under linux? There are additional parameters that missed me?

  Hello

  "Sdcli" command now works. Add/opt/sqldeveloper/sqldeveloper/bin in the 'PATH' environment at startup only '

  [oracle@windmill bin] $ echo $PATH

  /op/sqldeveloper/sqldeveloper/bin:/u01/app/oracle/product/11.2.0/dbhome_11204/bin:/opt/sqldeveloper/sqldeveloper/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/u01/app/oracle/product/11.2.0/dbhome_11204/bin:/home/oracle/bin:/usr/java/jdk0.8.0_45

• I have an error message of "can not question the source linux machine" when you do a P2V of a linux machine

  Hello

  I'm doing a P2V of a linux machine, but I get this error message.

  The system where you are running the Converter vCenter has active UAC? Have you tried to use the option "Run As Administrator" at the launch of the vCenter Converter? Have a look here for additional troubleshooting steps: VMware KB: when you do a conversion of Linux you receive the error: could not query the live source Linux computer

• How can I download Acrobat DC from a Linux machine to a separate Windows 7 machine?

  How can I download Acrobat DC from a Linux machine to a separate Windows 7 machine?

  Only Linux has Internet connection, but when I start to download, I get the dmg image, I need exe. Where can I decide which file to download?

  The installer may be recognizing the Unix environment and download DMG file.

  You can download executable files at the bottom of the direct download link:

  Download Adobe Acrobat products. Standard, Pro | DC, XI, X

• vCenter is a Windows/Linux machine?

  People a fast, is installing vCenter to review a Windows or a Linux machine? And is completely updated vMA in place for you?

  Need to make sure that I know what I see when I take the exam. 34 days to review!

  The vCenter Server system running Windows.

  You may need to use the vMA during laboratory tasks, but may need to know how to deploy and configure - check the objectives of the action plan.