Cannot pair Z10 to computer window 10

Similar Questions

• The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum)

  The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum).  I tried these solutions below, but it still does not:

  1. ensure that the printer is powered.

  2 disconnected then reconnected the power cable from the printer.

  3 unplugged then replugged the USB cable.

  4 checked Windows Firewall setting to ensure the communication of the printer is not block.

  5. restarted my computer.

  Please help me solve this problem.

  Thank you!!!

  Have you just tried reinstallling your printer yet? Even if it was working before, file corruption or other problems can sometimes be cured by doing this?

• [SOLVED] Cannot pair Z10 to a Linux machine

  I need to connect a Z10 to a basic OS.

  I installed QNX Momentics IDE.

  Now, when I type the password in the field 'Pair' using USB, it says "unable to connect! Unplugged device or can not be detected.

  The development mode and I chose autodetect in the USB section.

  Here is the command lsusb under linux:

  "Bus 002 Device 020: ID 0fca:8020 Research In Motion, Ltd.".

  If linux sees the device.

  Do I need to install any additional driver?

  For someone who has had the same problem. You must choose 'mac' in usb connections instead of autodetect. Team BB should solve this problem. Not everyone will try to put the mac when you use linux.

• Impossible to install SP3 on my computer windows XP - error 0x80072EFE

  original title: cannot install on my computer windows XP SP3

  I am re - install my PC computer. I can not install SP3. They tell me that it can be installed only if you currently have SP2. I finally got SP2 and still happen. I get the error 0x80072EFE code. Help!

  Hello

  · Are you able to install Windows update without error?

  · What is the error message that you receive the error code?

  Follow the steps in the links below and check if this can help: steps to take before you install Windows XP Service Pack 3: http://support.microsoft.com/kb/950717

  How to troubleshoot an installation fails in Windows XP Service Pack 3: http://support.microsoft.com/kb/950718

• Cannot successfully comQosants my computer with Windows updates. I have tried disabling Norton anti-virus and firewall.

  Cannot successfully comQosants my computer with Windows updates. I have tried disabling Norton anti-virus and firewall.

  Jim Eckland

  Jim,
  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• have an error on my computer - Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt... local profile, what should I do please help

  have an error on my computer - Windows cannot load the locally stored profile.  Possible causes of this error include insufficient security rights or a corrupt... local profile, what should I do please help.

  Hi MelbaIsaiah,

  I suggest you to follow the steps in the article and check if it helps.

  Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP

  http://support.Microsoft.com/kb/318011

  I hope this helps.

• START WINDOWS VISTA ERROR "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation.

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  Hey PeLon416

  If you have problems with the gateway recovery process, you will need to contact Gateway

  It's their recovery process not microsofts

  You may have a hardware problem

  support of bridge at the link below

  http://support.gateway.com/support/default.aspx

  Walter, the time zone traveller

• After you install a new motherboard, my computer displays "Cannot find AsusSetup.ini:C:\Windows\Chipset\AsusSetup.ini" at startup

  I built a computer from scratch. I installed the operating system and then installed the drivers of MB. I have clicked around on the display from the CD. Whenever I start the computer, I get an error message that says: "cannot find AsusSetup.ini:C:\Windows\Chipset\AsusSetup.ini". How can I stop then remounted error?

  Thanks for any help.

  Roger

  Hi Roger,

  Welcome to Microsoft Community where you can find the answers related to Windows.

  According to the description it looks as you receive an error message when you connect to the computer.

  This problem occurs because of the scheduled task or as a result of a software conflict on your computer.

  I suggest you perform a clean boot and check if it helps.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve problems using the clean boot in Windows: http://support.microsoft.com/kb/929135

  Note: once the diagnosis has been made, make sure that you reset the computer as usual

  Keep us informed on the status of the issue.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• When try to install the app in my new laption it displays the error "the product key you entered cannot be used to active windows on this computer".

  Original title: Activation of Windows 7

  Hello

  I have windows 7 Home premium dvd I bought from microsoft. When I tried to install the app in my new laption it displays the error "the product key you entered cannot be used to active windows on this computer".

  Please help me with this.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 8DTXM - 6FQ2H-BKDY9
  The Windows Product Key hash: tyrxnn4SwD4/dXymV2RGA4cQPHY =
  Windows product ID: 00359-OEM-9801782-52192
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {1BCBE11C-A21C-46C6-99B2-41DA76B3FEFE} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_rtm. 090713 1255
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

  Other data-->
  Office details: {1BCBE11C-A21C-46C6-99B2-41DA76B3FEFE}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-BKDY900359-OEM-9801782-521928S-1-5-21-1079193163-3130481270-3640039680Dell Inc.. Vostro 3558 Dell Inc.. A01 20150209000000.000000 + 000E9BB3607018400FC04090409India Standard Time(GMT+05:30)03109

  Content Spsys.log: 0 x 80070002

  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  The following files are available for download from the Microsoft Download Center:

  For a 32-bit version of the Windows Installer update for Windows 7 for x 86 based systems (KB971033)

  http://go.Microsoft.com/fwlink/?LinkId=150841

  or if you have a 64-bit version of Windows

  Install update for Windows 7 for x 64-based systems (KB971033)

  http://go.Microsoft.com/fwlink/?LinkId=152411

  Source: http://support.microsoft.com/kb/971033

  Please, run again in normal mode and copy Microsoft Genuine Advantage diagnostic tool and paste the results into a response for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

• Windows activation error: the product key you entered cannot be used to activate Windows on this computer.

  Activate Windows 7

  I would like to ask questions about how can activate my correct windows, I tried to activate it but he said to me (the product key you entered cannot be used to activate Windows on this computer) I don't know what I have to do?

  Windows product ID: 00426-068-2964761-86079

  Recently, there have been a rash of product keys for Windows 7 purchased from auction sites appear here as not authentic.  They appear to be related to this HROnline HrOnline code: 0xC004C4A2. If you have purchased a key of a web site selling auctions (like eBay), please understand that the seller would have sold this product to several people key, causing the key more on the blacklist. These keys were never intended for resale; they were intended for the software development or assessment depending on the program that they were obtained through. If you have purchased one of these keys and it became not genuine with the above code, you must purchase a new license for windows 7. Try to validate by going to www.microsoft.com/geniune and follow the links provided to repair windows.

  Added note. You have only a limited amount of time (45 days I think) filing a claim with the auction sites. Stay away from these keys, if you purchased a key that has turned non-genuine and are within 45 days of purchase file a claim. There are publishers of legitimate software on auction sites, but if it sounds too good to be true then don't buy it.

  Things to watch for.

  Recently reported several cases of blocked MSDN subscription product keys packed with legitimate research media. I can not stress enough to save your packaging, media and reception, if you buy software such as this to appeal to the Bank, you bought it and report it to www.microsoft.com/piracy.

  If you purchased a product key, with or without DVD or packaging of a sale auction web site (e.g. eBay) or any other person or seller and this could be a product key MSDN Subscritpion because your key has been blocked, you can check a few things.  If you have received your key with the physical product go to www.microsoft.com/howtotell and check your product.  However, some counterfeit software is if convince you may not be able to identify it as such.

  To check your PID the Win Key Press and have a break at the same time or open system properties in Control Panel, scroll to the activation section and look at the PID.  It will look something like this: 1234567-12345-067-54321.  The part that you are interested in is the section to three figures.  If it matches or is in one or two digits from the examples below, you probably have a "non-destinee for resale" MSDN subscription product key

  Suspect: 065, 066, 067 068 for Windows 7 Ultimate edition, 220 area for the professional and the 230, 231 area for Home Premium.  There are probably others, but they should be close to those posted.

• Windows 7 reactivation error "the product key you entered cannot be used to activate Windows on this computer."

  Original title: the reactivation of Windows 7.

  I had uninstalled my Windows 7, or more to the point, to the format that cause hard drive then I bought a copy of Windows 7 Professional 64-bit and tried to install it on my new hard drive 2 TB, but it is around. But now four to five months and this disc hard seems to have failed, the installation going crazy and ends by not completely. So now I use 8 64-bit Windows, on the hard drive that's used to have my old Windows 7 32-bit, and I try to install Windows 7 32 bit on my VMware Player as a virtual PC, but for some reason any bloody, the thing won't turn on. I got my license and my old Tower, the old tower and the old series of hardware Linux now without all the graphics cards, but it is going to be really just a supermodel, a server for a game and accommodation of the tracks that can be downloaded in the game, all she needs a new motherboard cheap as the motherboard, that he completely fried. But the issue I'm having is with virtual PC, however, I use the license that came when I bought it and is not wanting to turn on, it keeps Gush a BS error, my Windows XP is activated, but my Windows 7 does not. He always tells me that "the product key you entered cannot be used to activate Windows on this computer."

  How and why? I'm in my series that accompanies it, and that's exactly as it appears on the label. What I am doing wrong?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  If your license of Windows 7 is an upgrade:

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  --------------

• Activating Windows popped up and said this product key you entered cannot be used to activate windows on this computer.

  Product key problem

  I have three computers at home. And I have them updated to windows 7. But after I installed the new windows, activate windows popped up and said this product key you entered cannot be used to activate windows on this computer. It's my FOR THE WINDOWS 7 HOME PREMIUM product key # I brought . What can I do to fix this? Thank you and have a nice day. My e mail is * address email is removed from the privacy *.

  I have three computers at home. And I have them updated to windows 7. But after I installed the new windows, windows activation has popped up

  You bought a copy of Windows 7 for each computer?

  You can install a Windows 7 purchase on several computers if you have the Family Pack. When you have the 'Windows 7 Home Premium Upgrade Family Pack' for 3 computers, it is a retail copy and you can install Windows 7 on three computers at once. He'll say 'Family Pack' on it.

  When you have the regular commercial version, it can be moved to another computer, but it can be installed on a single computer at a time.

  If you have a legal copy for each computer, try to activate again. If activation fails, see the Microsoft Diagnostics real link below.

  Call Microsoft use the manual phone Activation

  If you have trouble activating Windows 7 you can call Microsoft to activate it by following these steps:

  1. start by clicking on the start menu, and then type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4 Select the telephone activation option, enter the number, do not select all options and wait for a person pick up, then explain what happened.

  If you are still unable to activate:

  (1) download and run the Microsoft Genuine Diagnostics tool:

  http://go.Microsoft.com/fwlink/?LinkId=52012

  (2) then copy and paste your results for inspection.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• the product key you entered cannot be used to activate windows on this computer

  the product key you entered cannot be used to activate windows on this computer

  I even tried to use the automated phone system activate call disconnects after I typed several times installation id, I tried

  the product key you entered cannot be used to activate windows on this computer

  I even tried to use the automated phone system activate call disconnects after I typed several times installation id, I tried

  Press the Windows key and R, and then type: slui.exe 4 and click on / input
  Then select your "country" in the list and choose the "Activate phone" option.wait for a person to help you with the activation.  Explain your problem

  http://support.Microsoft.com/kb/950929

• Product key cannot be used to activate windows on this computer

  When I put my cd key, it says «product key cannot be used to activate windows on this computer, and I used the key provided with my CD...» How can I solve this problem? : \

  Parcial Produto chave: M6T89
  Estado da licença: calculated
  Razão da calculated: 0xC004F009 (Contrato tolerancia tempo).

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your question clearly to the support person.

• Error "Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "When you try to install Windows.

  How can I configure my windows 7 after restoring my laptop to the factory conditians?

  My laptop had a blue screen and I couldn't get rid of it, I went into safe mode and restore my computer to factory conditions. When the computer says "the installation program starts services" you stop and I couldn't turn it back on for 15 minutes. When I turned on and tried to contained my setup, a message keeps poping up "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "But no mader, how many times I reboot my laptop, the same message appears. What should I do? I've restored my computer several times and never had this problem.

  You should try another recovery.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.