ProBook 640 G1: Audio HW buttons problem after Windows Installer 10

Similar Questions

• HP Probook 4530 s W7 x 64 freeze after windows installation

  Hey, I bought a version 4530 s with suse linux preinstalled. I format C:\ and installed W7 proffesional x 64. After this computer freeze. I can not install drivers or programs because computer freezing or slow, slow Veery. (I try to install a driver but take me about 30 minutes). should I need to update the bios? If eject cd/dvd-rom computer starts at the runn well but just for 1-1, 3 minutes and freeze again.   Please help me.

  Edit: if I run in safe mode runnig Ok computer.

  Hello

  Go to the BIOS

  on the Security tab, you should have DISK SANITIZER.

  That's down from the BIOS HARD drive format

  After that, you need to install win 7

  concerning

• My sata cd rom a problem after re-installation of WinXP Pro by this cd rom; error code 041; How do I solve this problem

  My sata cd rom a problem after re-installation of WinXP Pro by this cd rom; error code 041; How do I solve this problem

  It's almost certainly a driver problem.

  Please tell the service pack on your Windows® XP Pro level forum and the manufacturer and model of your system, if it is conditioned, or the make and model of your motherboard if it is not.  In addition, please tell us the manufacturer and model of the optical drive.

  First of all, if there is a system, go to the support Web site of the manufacturer for your system model.  If this is not a system, go to the support Web site of the manufacturer of the motherboard for your model of motherboard.  In the first case, you should find the drivers, chipset in particular drivers, updates and software for your system. Install all the that apply.  In the second case, you will find the drivers of integrated devices, chipset, updates and software for your motherboard drivers. Yet once, install all the that apply.  As we know nothing on the optical drive other it is attached via SATA, I can't talk about what to do there except that you should go to the manufacturer's support Web site and search for drivers and updated firmware for your model.

  It would have been helpful if you had provided more complete information on the installation of Windows, your system hardware and the optical drive.  The most complete information; more answers you will get.  Please, read:KB555375 - how to ask a question.

  Don't forget, no member of this forum is omniscient.

• big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

  big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

  Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

  You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

  But first, give us details about your configuration:

  STANDARD TEXT:

  Note that it is standard text.

  If you give complete and detailed information on your configuration and the issue,

  as your platform (Mac or Win),.

  accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

  your settings in Photoshop > Preferences > performance

  the type of file you were working.

  specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

  What troubleshooting steps you have taken so far

  what you receive, error messages

  If problems of opening raw files also the exact camera brand and model that generated

  If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

  A capture of your settings, or the screen image could be very useful also,

  etc.,.

  someone may be able to help you (not necessarily this poster, which is not a Windows user).

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• Problems with Windows Installer after using System Mechanic.

  I had a problem with my Dell 2 years and was told by the Support Dell buy iolo System Mechanic. However, now I have problems with Windows Installer (it is not installed correctly) and I've read that this can be caused by the registry cleaner in the iolo System Mechanic.

  So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

  Thank you!

  original title: Registry Cleaner/Windows Installer

  So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

  1 no, the registry cleaners can give you immediate relief, but they are a big pain in the long term.

  2. follow the four methods listed in the resolution section of the following article:

  http://support.Microsoft.com/kb/2642495

• Problem with Windows Installer (I think)

  Hey I just got a new 'game' PC with all the good things like i7 processor nvidia GTS 250 graphics card. So I guessed I would setup games. Games were installed very well the problems started when I tried to run SteamInstall.msi he looks ready to install for 1 second and then close and nothing happen. Even try to do once again nothing. So I gave up with it.

  Then I installed cod4, codwaw and download for both patches. When I try to install the patches it starts normal and after extractinng saying "" ".msi or msu or something it get stuck on the preparation for installation on both cod4, codwaw games and I think about others too... '".

  So I guess that's my Windows Installer problem... ? Windows Vista Home Premium SP2 (problems on SP1 also)

  Yoris,
  I think that if you had a problem with Windows Installer, then you would have also had a problem installing the games themselves.  If after installing just the game, you are able to start the game, then you will need to determine if you really need the patches you install.  If they fix game issues and do not add any content, then you may not even need of patches.  If it turns out that you do not have the patches and they are self extracting\installing files and then save them to your desktop and then right click and select run as administrator and see if that helps.  You can also check with Activision support , because this can be a problem they know. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with Windows Installer - installer stops and shows the dialog on the command prompts

  Hello

  I hope someone can help me with this question... I looked long and seriously, and you have tried all of the suggestions posted (cancel/save, etc.).

  I am trying to install a program and Windows Installer stops right in the middle of installation and a dialog box appears with information from command line, and the only thing I can do is select 'ok'... the program is not installed.

  Here is the info that appears in the dialog box:

  Windows® Installer. V 5.0.7601.17514

  msiexec/option [optional parameter]

  Installation options
   
  Installs or configures a product
  /a
  Administrative installation - installs a product on the network
  /j [/t ] [/g ]
  Publishes a product - m for all users, allows the current user
   
  Uninstalls the product
  Display options
  / quiet
  Quiet mode, no user interaction
  / passive
  Automatic mode - only progress bar
  / q [n | b | r | f]
  Sets the user interface level
  n no user interface
  b Basic UI
  r reduced UI
  f-full UI (default)
  / Help
  Help information
  Restart options
  /norestart
  Do not restart after the installation is complete
  /promptrestart
  Prompts the user to restart if necessary
  /forcerestart
  Always restarts the computer after installation
  Logging options
  / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
  i status messages
  w warnings recoverable
  e-all error messages
  a startup of actions
  r registers of the specific action of the
  u user requests
  c initial UI parameters
  m out-of-memory or fatal exit information
  o disk out-of-space messages
  p - Terminal properties
  v performance
  x extra debugging information
  + - Add to the existing log file
  ! -Flush each line in the log
  * - Log all information, except the x and v options
  / log
  Equivalent of / l *.
  Update options
  / Update [; Update2.msp]
  Apply updates
  / uninstall [; Update2.msp] / package
  Remove the updates of a product
  Repair options
  /f [p | e | c | m | s | o | d | a | u: v]
  Repairs a product
  p only if the file is missing
  o If the file is missing or an earlier version is installed (by default)
  e If the file is missing or an equal or higher version is installed
  d if the file is missing or a different version is installed
  c If the file is missing or checksum does not match the calculated value
  has all the files to reinstall the forces
  u all (default) user-specific registry entries
  m all requirements (by default) computer-specific registry entries
  s all (default) shortcuts
  v-runs from source and recaches local package
  Setting public properties
  [PROPERTY = PropertyValue]

  Consult the SDK Windows® install to get additional documentation on the
  command line syntax.

  Copyright © Microsoft Corporation. All rights reserved.
  Portions of this software are based in part on the work of the Independent JPEG Group.

  I hope someone has a suggestion for this problem... I just bought a new laptop and Windows 7 Professional came installed on it.

  Thank you

  Linney thanks for your response!

  The file I'm trying to install is an exe file (so the SIG file is embedded in the exe file).

  I tried the option "Run As Administrator" and it did not work.  However, you gave me an idea that has provided a work around that allowed me to install the program.

  Once this dialog box is displayed with all the control switches, rather than press 'OK', I left on the screen and went in the 'temp' folder and find the MSI program I tried to install (I cross referenced the timestamp of when I tried to install it to find).

  Once I found the updated file, I clicked it, and he proceeded to install the program... I have not had any other problems with the installation.

  So, there's something wrong with the way that the exe file have been created and how the files extracted from the msi file (these are files of Intel and Lenovo - driver updates - so I think they do these things) or there is a problem with Windows Installer.

  For now, at least, I have a work around I use until I find a solution to this problem of permanent

  Thanks for your help and for taking the time to answer!

  I hope this can help someone else in the future

• I'm having a problem with "Windows Installer"... Can't find a way to heal or recharge the program?

  I'm having a problem with "Windows Installer"... Impossible to find a solution to heal or recharge the program

  Hello

  1. what question do you face with Windows install on your computer?
  2. do you have an error message regarding the Windows Installer on your computer? If Yes, what is the error message?
  3. what task you were trying to do when you got the error message?
  4. have you done any software or hardware changes on your computer before this problem?

  Please refer to the section: Windows Installer issues in the following link.

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651/#reso1

  Further,.

  Please responses to the above questions and add additional information so that we can better guide you.

• Satellite P855-31V: some problems after the installation of Win 8.1 and drivers

  After that installation of 8.1 of Windows and updated drivers have problems:

  1. the switch market/no work
  2. flight mode button not work
  3. ECO button not work
  4. applications not available menu home

  Notebook * toshiba satellite p855-31v *.

  Could you help me please?

  Usually very important to install and update the drivers in the correct order.

  The + installation instruction doc + you can find on the page of the Toshiba UE (Windows 8.1 update) driver provides this order:

  1 Intel Wireless display uninstall
  2 windows 8.1 update to install
  3 TOSHIBA Assist Desktop Upgrade
  4 Intel Display Driver upgrade
  5 NVIDIA Display Driver upgrade
  6 Intel Rapid Storage Technology driver upgrade
  Update 7 Synaptics Touch Pad Driver
  8 update of Realtek Wireless LAN Driver
  9 Intel PROSet/Wireless WiMAX software update
  Update the driver from Tuner DVB-T/ATSC of 10 YUAN
  Update driver TOSHIBA 11 Support
  Upgrading TOSHIBA 12 system pilot
  TOSHIBA 13 function key upgrade
  14 TOSHIBA eco Utility v2 upgrade
  TOSHIBA 15 fingerprints digital utility upgrade
  TFPU 16 WBF deleting fingerprints tool upgrade
  17 TOSHIBA HDD Protection upgrade
  18 TOSHIBA VIDEO PLAYER Upgrade
  Update of the 19 TOSHIBA Blu - ray disc player
  20 TOSHIBA PC Health Monitor Upgrade
  CyberLink MediaShow 6 21 for upgrade TOSHIBA
  ArcSoft 22 TV5.0 update
  Plug-in for Windows Media Player upgrade 23 TOSHIBA resolution +.
  24 TOSHIBA Media Player by TrueLink + Upgrade sMedio
  Update 25 TOSHIBA Service Station

• Audio does not work after the installation of Vista on Satellite Pro a series?

  Done a format and a new facility with vista ultimate and can't get the audio from realtek to work.
  The drivers install properly but don't have still no sound.

  Download realtek 97 and drivers HD, but still no luck.

  I had this problem some time and fixed it but I can't find where I found the solution of :(

  Any help would be great, thanks!

  Hello

  First if all would be very useful to know which model of laptop you have.
  Second, you could find the driver of his right on the page of Toshiba and so you n t need to test several audio drivers! The one on the Toshiba driver site works for sure.

  I read about a similar problem on Vista OS and these Toshiba document should help you:
  [Audio cut off (no sound) after the installation of Windows Vista: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1886 758xml & sliceId = & dialogid = 54568603 & stateId = 0 0 51373343]

  Check it out!

• Problems after Windows Update on Vista wireless

  It seems that other people have a similar problem, but I'll post this new...
  I've been running Windows Vista Ultimate on my Toshiba laptop for years without any problems.  Earlier this year, I started seeing issues after Windows updates.  The main problem is that after updates Windows, my wireless network is is more noticed and the wireless card (which was installed on the computer, and never had problems before) is not recognized.  I manually installed updated drivers with no luck.  The only thing that has worked is to do a system restore to a point before the updates.  The problem seems to be related to an update in general, I can't uninstall.

  I find it extremely ironic that I have no problems with Vista until Windows 7 is launched. First of all, it's the wireless card, then a problem with a driver graphics card (apparently... which seems to be fixed now) and return to the wireless card.  Should I expect to continue to have problems unless I upgrade to Windows 7?  I can't continue to spend half of my day trying to fix my computer after an update that is supposed to fix the errors, but I don't like the feeling that I am forced to upgrade.

  Hi dabaum77,

  From your post, it seems that the issue was occurring when Windows updates are installed automatically again even after the restoration of the system and that is why I suggest to restore the system again to a point before the updates and download and install Windows updates manually.

   

  Access the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Follow these steps to disable the automatic updates:

   

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. in the left pane, click on change settings.

  3. under important updates, choose the option you want.

  4. under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click OK. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  
  Install the updates one by one and check the update is causing the problem to occur. If the problem persists due to a particular update, repeat the process and refrain from settling the problem causing the update to.

  
  You can also check the update problem in Windows Update history.

   

  Follow the steps to check which day caused the issue:
   
  1. open the control panel (all items view), and click the Windows Update icon.
     
  2. click on the link to view update history.
    
  3. to view the details of a single Windows Update-
  (A) select and right-click on a Windows Update list, and then click details.
  
  (B) click on close when finished.
   
   
  You can also uninstall the update that is causing the problem to occur, although it is not recommended.
   
  1. to uninstall a Windows Update, you must go to programs and features. There are several ways to find it. One of the simplest is to use the search box on the start menu.
   

  

  2. in the programs and features, click the link updates installed.
   

  

   
  3. after a few seconds, Windows Vista will load the list of installed updates. Scroll down the page until you find the update you want to delete, select it with the mouse and then click on uninstall.
   

  

   
  4. Windows Vista will ask you to confirm that you want to uninstall the update you selected. Click Yes and the uninstall process will begin.
   

  

   
  5 depending on the size of the update, the uninstall process may take from several seconds to several minutes.
   

  

  
  6. wait for the window above will disappear and, if necessary, restart your PC. The update is now deleted.
   
  
  Aziz Nadeem - Microsoft Support

• Windows 7 - problems after Windows updates

  When Windows Update 17 new "updates", it due to my new HP computer to not connect to internet.  I talked to HP two hours Monday, 18th and thought we had set.  But the updated Windows Update during the night and the next day he couldn't connect to the internet.  Two hours with HP and finally the gal thought it would be better if I have the option of not accepting updates, or accept only updates Windows or HP.  I did today and do not connect to the internet.  Whenever I have to restore to October 16, which is the last time, he did not work properly.  Help, please!  Thank you...

  Have you tried running the resolution of Internet connection problems after these updates?

  Click Start, type: Troubleshooting

  Press enter on your keyboard

  Do a search for Internet connection

  Double-click the Internet connection problems and follow the wizard to display on.

  Using Windows - Management, configuration, and troubleshooting updates
  http://www.windowslive.com/connect/post/59e9b812-d92c-4dc7-B53C-c1a9ee5bcaf3

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• HP ENVY 15 l: I have a lot of problems after windows 10

  Hello

  I have a lot of problems after the update of Windows 10

  1 - what sleep mode the screen is not working! (I already tried to change the keyboard, but to no avail)
  2. the footprint does not work after the update!
  3 programs Microsoft Office cannot be installed after purchase! (Whenever you download the package, I get an error message)
  4 - when I walked in the updates (windows) tells me that there is an error message!

  Windows 10 home unique Language، (error)

  ....
  Please help me as soon as possible! I have a cousin reviews

  Hello @shySmile,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I came across your post about the problems associated with Windows 10 and wanted to help!

  For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:

  How can I find my model number or product number?

  Try to see the next post to solve the problem of the Standby Mode. and let me know how it goes:

  How to troubleshoot upgrade Post-Windows 10 on HP laptops

  Can you give us more information about the print does not work after the update?  For your problem regarding the purchase of Microsoft Office, contact Microsoft Product Support.  To solve the problem with the update of Windows, try using the following tool found here:

  Open the Windows Update troubleshooting tool

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Printer problem after Windows XP updates on 06122013

  Title updates: Windows XP original on 06122013

  Updates of Windows XP on 06122013 seemed to make me lose contact with printer HP LJ1200 and had to perform the restoration of the system to 06112013 do work again. The printer is set up as a parallel device, running on Port DOT4_001 (according to article of Port in the properties of the printer) and was removed in the LPT1 Device Manager and computer rebooted and reloaded LPT1.
  Tracking the whole Troubleshooting MS system under properties and nothing seemed to allow printing, so I restored the machine on the eve. Now the printer works.

  Computer is a Xeon E1395 of double a ASUS PC - DL Deluxe Intel

  Everyone still faces a problem of printing with the new updates?

  Hi Michael,

  I see you got a problem with printer HP LJ1200 after installation of updates recently offered from Windows update.

  What exactly happened when you were trying to print after the recent updates? Have you received an error message?

  Thanks for the sharing of information when you perform a restore as solved the problem.

  This issue would have occurred as a result of updates related to the printer or the additional updates to the hardware device connected to the computer. Sometimes, when these problems occur after Windows update, we should always check the specific updates that have been installed right before the problem occurred. In this way, we can identify the update that caused the problem.

  As the problem does not persist now, I suggest you to download and manually install the updates individually to determine the exact cause of the problem.

  Please let us know if you need help on this question.

• Problem after the installation of the language

  I had a disk crash and need to re - install photoshop and first elments 12. After the installation of the drive of these two programs, the language is English, although I pulled DUTCH on the installation process. UN - and reinstalling both programs stay with the same problem. Please inform how the change of language/setup can be done.

  Dear Romano,

  Thanks for the guideline.

  I finished the successful re-installation. Finally, the program works in the Dutch language!

  Although this was done after a long time experience and installation in various ways.

  When I choose my home region of the Belgium, the program is in English.

  When I choose the region of the Netherlands, the language is Dutch.

  You know that the population of the Belgium is partly Dutch, partly of French speaking.

  Also, I found that my Windows 10 (64-bit) does not work the ss12 program in the Program Files (x 86) folder.

  Under normal Program Files, the program works.

  BTW, I always installed with administrative rights.

  Best regards

  Jacques Dekimpe