Some CSS formatting disappeared when you preview in the browser

Similar Questions

• Widget menu: Text disappears when you preview in the browser?

  Hi all

  I created a site and have a top-level page, with a subpage.

  The site uses the Menu widget in Muse to create a menu with dropdowns for sub-pages. However, when I saw the site in the browser, the State in the top-level page menu ' Normal and 'Active' disspears functions.

  He re - contains working capital, so that the browser knows it's there, but it is not displayed.

  No idea why?

  And how do I fix it?

  (Ive attached screenshots of the page within the Muse and then the same page once spotted in the browser)

  As always, soloutions and most apprieciated response (s)!

  

  
  Overview of the browser

  

  Overview of the browser on the function of turning

  

  See you soon!

  Robbie.

  Hi Robsta,

  Looking at your 1st image posted above, I say (recommended) that the 2nd blue, guide from the top (the guide of the header), should be moved to the bottom and put just below your menu... would make it on the 'master' page... it's the line header of the guide... all "under" this line is page content (a menu is not contained in the page) changes of content throughout your Web site... 'at the top '. This line is your header information and remains in the same location without worrying which page you are on and is displayed on all pages...

  Now, if that fixes the problem (the blue guide that needs to move, must nevertheless be moved)... is it possible that some States 'active' in your menu have I screwed up when you changed the colors of your button? ... This would happen only if you edit the menu with the "Edit together", "checked"... I see that active state is set to gray already so just a question..., sometimes if the guide of the 'head' is not where it should be, it hides things down because he does not know what needs to be shown or not... then it's just a thought...

  see you soon,

  GemBro

• Why no animation visible layered on top a movie when you preview in the browser?

  • I use the latest version of EA CC (2014)
  • Import video
  • Converted to a symbol
  • Added a controller... plays very well on his script, or preview in browser

  Then, I made the following...

  • Double click on the symbol of the video
  • Created an animation to play on
  • Everything shows fine Preview on the chronology of the coast

  This is the problem...

  • When I saw in the browser, the video plays well, but the animation I layered on top, is not visible at all
  • Please advise, thank you.

  Hi Eddie,.

  I think I understand. Here's the thing: video element controls has nothing to do with the chronology of symbol - it is only intended to control the video element (this is in fact the native media controller that every HTML5 browser provides for video & audio - you may have noticed it's different in different browsers). So when you stop your video, the scenario of the symbol continues to play.

  It is critical to make default controls for the video? Otherwise, I omit them and just to control video playback with the playback actions, or with your own code. With a few buttons and the code, you can pause/play the video element as well as the chronology of the symbol in same - button clicks is the best way to keep the video editing and symbol in sync.

  HTH,

  Joe

• Play animation, strangely when you preview in the browser...

  When I saw in the browser, it plays at the outset, that I don't want that she and then plays only once on turnover. The desired effect is so he can start to grey, then when you mouseover it, red slides upward from the bottom, and when when you mouseout/mouseouthandler(), red slides down. Here a link to my file.

  Put on the gray rectangle mouseenter and mouseleave on red. Given that the red rectangle is hidden when you start, you can't have the mouseenter on that event.

• auto parts animation when you preview in the browser

  This happens even if I add the stop action to the scene during the creation of composition

  To stop auto play you add stop in a trigger in second 0th or uncheck the "Autoplay" for the stage.

  

• Swatches to Pantone which disappears when you use only the percentages of the swatch

  Hi I came across something that might be a bug in Illustrator CS6...

  Here's the thing... I did a drawing or model in the CS6 (colorspace) and have used several Pantone swatches.

  Some Pantone colors, I used only a percentage of the color, for example, the design consists of: 75% of Pantone 485 C, 32% of Pantone 1345 C and 100% Pantone 154 C.

  In the design process, I used several other colors Pantone, which are not used in the final design, but they are still in the tab/list of Swatch.

  For example, when you click on the triangle (top-right) > "Select" is not used all the.., Pantone colors which are used only as percentages (Pantone 485 C & Pantone 1345 C in the example) are chosen as "Unused" ?

  I've been using Ai CS4 prior to this version, and in this version, it wasn't a problem.

  I could you the percentages of Pantone colors without the shade chosen as 'Unused'.

  I don't really want to manual remove every unused nuance by dragging it in the trash.

  It would be such a time waste handling.

  It's really annoying that I work for a printing and design company, and the need to save the Pantone colors that are used in the design, even if they are only a percentage of the Pantone color chart.

  Could someone please explain me why or what the reason is that this is happening...

  I missed something?

  Thank you!

  When you created the hue of the color Pantone you did that made a shade? Or did you just leave it as it was?

  If you don't have whereas they should stay, but if you just changed the tint but did not save it as a sample then the pms color is no longer used because it is a specific hue. At least that's how it seems to work.

  I agree with you that you always use the PMS color and have to stay without the need for nuance, even if it a shade of each color is a good idea.

  I would say it is a bug and should be reported as such. Cn do you here:

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• When you preview in a browser, my pages look or align it even when in design mode. Help?

  Is there any help or advice people can give me? I am VERY new to Muse and web design. However, I am not new to the design and use of Adobe products. No tutorials seem to this address, and I've been fiddling around for quite awhile. Someone please help. Also, I tried to change the size of the web site and that doesn't seem to help either. :/

  Very well. Now go right out of the site I believe that your installation is. a picture from the top, then a box (shipping container), then you have the menu inside the box (menu = navigation).

  So you have the navigation inside:

  

  inside a container of navigation may be:

  

  What you want to do is to select the navigation and the navigation container (or just the image above)

  

  then you can align these so your navigation still remains in the middle (if you wish)

  

  Now, whenever you do this, the container of navigation box automatically adapts to the width of 100% (which means that it will fill the page)

  So, after this step you want to select only the area of navigation container

  

  and uncheck the box appear here in red

  

  Then in preview in the browser, that you should now see all line up properly and the navigation container should grow is more the width of the browser page.

  

  Now, if that doesn't help - let me know and we can set up an Adobe Connect session where I can help guide you through the live stage.

  See you soon,.

  Craig

• Picture moves when you preview in a browser (was: DW CS3 question)

  When you attempt to place an image in a page in DW CS3 and try to view the online placement, even if the positioning is correct using firefox, the image moves to the top of the page when you use safari.

  Any comments?

  You do not have a page printed on a typewriter.  It is a web page.  Do not use the key entry as a layout device.  It does not work.  It is same for the space bar and tab keys.   Not good.

  Learn to use CSS margins and padding to align items if you wish.  In very rare situations, you may need to use a little CSS positioning, too.  But it must be done with care.

  Also remember that all browsers add their own default margins and padding to HTML elements.  This results in the change in browser.  You can use a CSS Reset to remove the margins by default & fill if necessary.  But these effects each element on your page.

  * {margin: 0; padding: 0}

  Nancy O.

• Introduce the button disappears when you return to the quiz slide

  Hello world

  We have just improved Captivate 4.0 to 5.5. I teach to 5.5 differences between 4.0 and one that I can't understand.

  On quiz slides, if the learner move previous and next in quiz slides, buttons quizzes are fine. However, be they click on slide 1 quiz, then advance to the quiz slide the submit button flashes and then disappears for this slide and all other quiz slides. I can't find a setting to fix this.

  Any suggestions or ideas would be appreciated. Thank you.

  Sounds like a problem of scope of quiz.  If you click on the first slide of quiz that would take you to the slide BEFORE the first slide of questionnaire which is technically outside the scope of quiz.  This generally means locking Captivate quiz.

  I didn't know personally this Act of disappearance of button, but you can check if the scope of the quiz is the likely culprit by adding an a received, click Inbox in the first slide of the project, which will then extend the scope of a quiz on this slide.  If this prevents your quiz slide buttons from being endangered, we know the problem.  Which may mean that you have always found a bug that needs to be fixed though.

• Changes to pages are not displayed when Site previewing in the browser

  I've made a few changes to a couple of pages, and when I saw Page in the browser, the changes appear but when I saw Site in the browser, the changes aren't there and the old page is displayed, even if some of the information on the original page has been deleted. How is this possible and what can do about it? I don't know if that makes a difference, but first, the original files have been copied from another computer on my Mac computer, and the file was an older version of Muse CC. When I open the file on my computer, he showed he was converted. Yet once, don't know if that makes a difference or not. Thank you.

  Using an old or converted file indeed should not make a difference.

  To test whether the Muse of output is less correct, you might try to use export to HTMLand see how freshly build it Web site looks like from the index file in this folder (Muse already will open it for you). If it seems to be correct, then the browser caches are just messed up. Not much, try hitting refresh to force reload or remove these caches (most browsers offer a command to do so). If this is not correct, then you are in different difficulty...

  We will try first step described.

• Acrobat is changing hyperlinks when you open in the browser

  Hello world

  I have a pdf file containing a large number of hyperlinks. When you click on some links, Acroabt opens a browser window, but the page does not load because some of the characters in the URL are changed. For example, the following url:

  http://law.ATO.gov.au/atolaw/view.htm?rank=find & Criteria = and ~ PS ~ exact: AND ~ THE ~ base ~ exact: AND ~ 2F4 2010% ~ core ~ exact & target = OA & style java = & sdocid = PSR/PS20104/NAT/ATO/00001 & re cStart = 1 & PiT = 99991231235958 & Archive = false & recnum = 1 & tot = 3 & pn = ALL: ALL

  .. .gets replaced by this:

  http://law.ATO.gov.au/atolaw/view.htm?rank=find & Criteria = and % 7EPS % 7Ebasic % 7Eexact: 7% and THE % 7Ebasic % 7Eexact: AND % 7E2010% 2F4% 7Ebasic % 7Eexact & target = OA & style java = & sdocid = PSR/PS2010 4/NAT/ATO/00001 & recStart = 1 & PiT = 99991231235958 & Archive = false & recnum = 1 & tot = 3 & pn = ALL: ALL

  It seems to be to replace the tilde (~) sign with the following characters:

  7%

  When I fly over the hyplink in Acroabt, the correct version is displayed. It doesn't happen until it is enabled and the browser window opens.

  Anyone know why this happens or if there is a workaround?

  Thanks in advance

  Tilde is forbidden without doubt in a URL and should be replaced by 7%. If Acrobat doing the right thing. Now we can often get away with the tilde, but they must be treated as exactly equivalent.

  This is discussed in http://www.cs.tut.fi/~jkorpela/tilde.html , which can also be accessed as http://www.cs.tut.fi/%7Ejkorpela/tilde.html.

  You are right that the website of the Australian Government does not accept this. The site seems faulty.

• Imported text formatting disappears when you change the font in the character palette.

  Something seems to have changed with my InDesign, and I don't know why. Here's what I used to be able to do.

  I could import a word doc into a text box. This text would be bold italic, regular, fonts. I choose the text box, and then change the font using the character palette by changing just the upper box of the police. For example, if the police imported as Helvetica, but I wanted to be all Futura, I check the box and then simply type Futura and all bold Helvetica would become "BOLD" Futura, and italic Helvetica became Futura Italic, etc.. I didn't have to select each row.

  Now if I try to do the same thing, when I select Futura, it changes just ANY text to regular Futura. I lose all the precedents of the formatting that was imported from the word doc.

  I hope this makes sense.

  How can I go back to the way it was?

  Help, please! It's maddening! Not a big deal to design unique flyer but when laying on a book, it could represent DAYS on the project.

  Thank you!

  I fixed it. It was so simple. I just stumbled upon the answer.
  All I had to do was change the search option using this drop-down list. (See the image)

  

• interactive report formatting disappears when you run custom reports

  I have an interactive report with several variations as the public.
  I also put some column widths and the table set shaped with javascript "when loading the page.
  
  If the user goes to a public report the javascript is executed, not in form is not displayed.
  
  Is there a place of javascript to put the code to execute when run it public reports to interactive reports?

  kgough wrote:
  I have an interactive report with several variations as the public.
  I also put some column widths and the table set shaped with javascript "when loading the page.

  It is impossible using CSS?

  If the user goes to a public report the javascript is executed, not in form is not displayed.

  Is there a place of javascript to put the code to execute when run it public reports to interactive reports?

  Use a dynamic Action "After Refresh" on the IR region.

• Why my items do not disappear when you drag from the timeline?

  In some of my ID docs, when I drag an item to the editing table, it remains visible. In other ID docs, the item disappears as soon as it leaves the artboard. What is going on? and how to fix it?

  Mode screen thingy. Set it to 'Normal '. Problem solved.

• the mouse movement is not displayed when you preview the project and after publication

  I missed a step when you change a demo of simulation? Here's the problem:

  When I edit in the timeline of a slide, I can move the appearance of the mouse movement and change the length of its duration; I can click on "show/hide elements" for the mouse, the text caption and select box to show or hide in the slide.

  All the changes reflect in preview > play Slide. But in preview > project or preview > in the browser or publish it to any format, except for the presence has changed and the duration of the movement of the mouse shows, others seem out of my control: 1) no mouse movement; (2) the pointer still displays its final position on the slide since the beginning of the slide; (3) the hidden nail box appears.

  That's happened?

  I come off some defect? Where is it?

  Thank you!

  Your question is not quite clear to me, but this sentence "I can click on" show/hide elements "for the mouse, the text caption and select box to show or hide the slide." is ring a Bell! Have you used the "eye" icon in the timeline panel to "hide" the objects? That is not intended to hide the version published, only to temporarily hide for editing purposes, have has too many objects on the slide. If you really want to hide an object permanently, so it does not appear after the publication or during a preview (play Slide is not a preview, is also only for editing, synchronization) you must use the 'other' "eye" icon you will find at the top left of the properties of this object Panel. Quite confusing to have twice the same button to completely different purpose (there is even a third version in Drag Drop & who still has another feature, just hide the links in the D & D).