target types are not cRIO

Similar Questions

• Message error "data of this type are not supported.

  Original title: cannot run files as an administator?

  I can very well run files (.exe, ect)
  I can't just stuff like an administrator lance. I usually get the error message: "the data of this type are not supported" I tried to pass microsoft too download a 'fix - it' too, but when I try to run too .msi it say 'Administator blocked privledges' or something of the sort.
  Everything works completely fine 100% in safe mode.
  It happened after I did a virus with malware bytes scan and deleted a virus derived from 'PrivitizeVPN' that is a VPN that was actually a virus.

  Hi Raul,

  Use the Microsoft Safety Scanner in full scan mode and remove all threats that is not detected by it and see if the problem persists.

  Microsoft safety scanner

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Please make a backup of all the data to an external hard drive before performing a scan because it might cause data loss.

  Answer please if you have any questions.

• Timestamp for date columns data type are not imported in discoverer admin

  Hi all
  Someone you will suggest why timestamp data type columns are not imported into admin. discoverer other types of data import you correctly, but the timestamp data type columns are missed.
  
  Please let me know to change the type of data is not possible at this time.
  Thank you

  Hello
  You will be disappointed because the timestamp columns are not one of the recognized data types supported by the discoverer. He acknowledges only dates, strings and (integer and decimal) numbers.

  Maybe you could put up a view that matches the table you use, convert the timestamp in a rather ordinary date?

  Then, inside your end-user license, all you would have to do is redirect the folder to view.

  Best wishes
  Michael

• the dynamic types are not picked up by - ("com.vmware.library.vcaccafe.asd.customresources") .getAvailableInventoryTypes

  Try to get our host vCAC recognize/import the type Dynamics/object classes and create custom resources. The call to action 'createCustomResourceFromInventoryType '. The inventory of the available dynamic types is not returned. As vCO using test research of the api; I see the DynamicTypes under the namespace created for them. Of course, they exist in the inventory of vco under dynamic types. Test the code below:

  type host = vCACCAFE:VCACHost

  var inventoryTypes = System.getModule("com.vmware.library.vcaccafe.asd.customresources").getAvailableInventoryTypes (host);

  for each (var inventoryType in inventoryTypes)

  {

  If (inventoryType.GetName (). IndexOf ('case'). = -1)

  System.log (inventoryType.GetName ());

  }

  Basically just get returned undefined. It doesn't seem like a problem of vCO. It seems that just vCAC is unable to recognize the dynamic types.

  Have had problems with vCAC and DT vCO plugins in the past and have tried several permutations of plugin removal/relocation, (KB2003386) including the file, restart the server and delete Configurator package & dar and then reload. These versions using:

  DynamicTypes 1.0.0.1951696

  vCAC 6.1.0.2073620

  vCAC Infra 6.1.0.2040915

  something stupid in the end... Turns out be the default vCO server which is the embedded server vCO in vCAC. Replace that in the Red hight of the vCO uses the vCAC org - and it's good.

  

• Some file types are not not in the settings of Applications

  OS: Windows XP SP3
  Firefox 4.0 & Pale Moon 4.0.5

  I have a problem when I download files from the executable (.exe) type. Previously, I checked the sign while Firefox will automatically download the file via the Download Manager. Unfortunately, some sites do not allow download with it. But when I want to change the setting, I can't find the type of executable files in the application settings. So, how I normally redownload? Help, please!

  I think that you need should be in settings of the add-on - we.

  Firefox tools > Options > Applications is for downloads that are in need of an application to open. The executables are designed to run directly on the operating system rather than be opened by another application. In addition, executable files are generally sent from the server with a generic binary file header, so Firefox will not be able to match up to the top with a particular file type.

• custom types are not valid

  create or replace type o_CustomerLoopElement as object
  (
   
                                        TermID   NUMBER DEFAULT NULL,
                                        TermceID NUMBER,
                                        CABL SLPA.CABLE_NUMBER%TYPE,
                                        Pair SLPA.PAIR_NUMBER%TYPE,
                                        CentralID NUMBER,
                                        CentralName SLPA.OFFICE%TYPE,
                                        DSLPAID     NUMBER,
                                        CPAction VARCHAR2(50),
                                        PAProvisionStatus NUMBER
  
  );
  
  CREATE OR REPLACE TYPE t_CustomerLoopElement
  IS TABLE OF o_CustomerLoopElement;

  After I run this query, these objects are always invalid when I ask object. don't know what mistake I make.

  You cannot use the % TYPE operator. It is a construction of PL/SQL, you try to create a SQL object. You need to hardcode data types.

• External files are not deployed to target

  I'm trying to follow the example in this post where the user specifies a file in the build specification which includes no - LV files.  It contains HTML files that must be deployed with the project.  It seems to be a good idea to keep HTML and JS files with the code LV that they interact with.  When I deploy the project, however, I see that the HTML and JS files are unpacked to /tmp/webservices/userservices/deployed/control-2C7CC494-343D-11DF-811F-00802F112BC5/data on my cRIO.  When I navigate to the cRIO, however, I'm not used files because they are not located in the directory/nor-rt/system/www.  Is this a bug in LV or my misunderstanding of the function?

  Found the solution.  The target doesn't have to be in the directory/nor-rt/system/www.  Carefully following the instructions at http://zone.ni.com/devzone/cda/tut/p/id/7747#toc15 provided the solution.

• iCloud music library playlists can include music from your music library to iCloud. This playlist cannot be downloaded, because it includes other types of media or songs that are not eligible

  Some Audio files are not eligible in icloud library, how can I force icloud to copy in my iphone. They are legitimate files (audio course)

  The elements should be considered as songs (music).  They must be your music iTunes library.  If they are categorized as another type of media (through iTunes), as a podcast or an audio book, you cannot then put on a playlist that is in your music to iCloud library.

  The song file may not exceed 200 MB.  The song should not be longer than 2 hours.  The song encoding cannot be 96 Kbps or less.

  If your audio elements (like songs) are not eligible, you will be able to modify them to make them eligible.  How depends on the reason to be ineligible.  Alternatively, if you have iTunes classify 'song' as a podcast or an audio book, you can load them on the iPhone the 'old school' way, live sync.  To change the category of the item in the window to read the information of the element (in the Options tab) change Media kind of music Podcast or audiobook.

• This playlist cannot be downloaded because it includes other types of media or songs that are not eligible.

  iCloud music library playlists can include music from your music library to iCloud. This playlist cannot be downloaded, because it includes other types of media or songs that are not eligible.

  What does that mean? I have iTunes game and not really encountered problems previously? I don't understand why I get this message? I'm just trying to create a playlist. Other playlists seem to be OK?

  Hello

  The playlist includes either a music file not for example PDF or a music file that is not eligible. Add iCloud status column to your playlist (view of the song) and it will tell you what is unacceptable.

  JIm

• ArraytoChannels error 'cannot be added because the channels of the target are not all the same length.

  Hello!

  After the end of my second day of test error, I put this question on the table:

  I use ArraytoChannels function to store ADO recordsets as strings. What is strange, is that for the first Recordset, it works; but for the next time through the loop, it always fails with the error message 'cannot be added because the channels of the target are not all the same length.

  I confirmed that:

  the RowData sizes and the ChannelNames are equal,

  both spend the isarray = true test,

  I change the order of the ChannelNames,.

  I have reconnected/disconnected from the oConnexion every time, nothing has changed.

  Apparently I'm missing something - but crazy to know what! -If anyone can share his opinion I'll so much appriciate. Here is my code:

  oTables = Array ("WellStates", "ChokeData", "WellParameters", "FlowData", "PumpData", "SensorsData", "ModelCalculatedData")

  Call OpenSQLConnection
  Set oRecordset = CreateObject ("ADODB. Recordset')
  Call SelectWell
  Call GetWellStateIDs

  Data.Root.Clear
  for j = 0 to ubound(oTables,1)

  sSQLSting = "select * []" & oTables (j) & "] where [WellStateID] between" & WellStateIDFirst & "and" & WellStateIDLast ".
  oRecordset.Open sSQLSting, oConnexion
  Protected oFieldNames: table: ReDim oFieldNames (orecordset. Fields.Count - 1).
  for i = 0 to orecordset. Fields.Count - 1
  oFieldNames (i) = orecordset. Fields.Item (i) .name
  next
  oArray = oRecordset.GetRows (-1, 0, oFieldNames)
  Set oGroup = Data .root .ChannelGroups .Add (oTables (j))

  oArray, oFieldNames arraytochannels
  oRecordset.close
  oConnection.Close
  next

  Sub GetWellStateIDs
  sSQLSting = "select * from [WellStates] where [wellid] =" & WellID
  oRecordset.Open sSQLSting, oConnexion
  oArray = oRecordset.GetRows)
  WellStateIDFirst = oArray (0,0)
  WellStateIDLast = oArray (0, ubound(oArray,2))
  oRecordset.close
  EndSub

  Sub OpenSQLConnection
  Set WshNetwork = CreateObject
  oComputerName = WshNetwork.ComputerName
  oDB = "MX2. Player.DB ".
  Set oConnexion = CreateObject ("ADODB. Connection")
  oProvider = "Provider = SQLOLEDB.1; Integrated Security = SSPI; PeoExecuteist Security Info = True; Data Source ='
  oProvider = oProvider & oComputerName & "\MX; Use procedure for prepare = 1; Machine translation = True; The packet size = 4096; Workstation ID ="
  oProvider = oProvider & oComputerName & " Use encryption for data = False; Tag with column collation when possible = False; Initial Catalog ='
  oProvider = oProvider & oDB
  oConnection.ConnectionString = oProvider
  oConnection.Open
  EndSub

  Another clue. If you check using DIAdem

  Microsoft Windows Script Debugger

  you are able to install the debugger in DIAdem.

  It would potentially have shown that the command does not work as expected.

  Sorry for the inconveniance

  Andreas

• Type is not supported in the current target.

  I am trying to write a simple FPGA program to read in an array and output a number at a time. But I get an error saying unsupported in the current target Type. What I am doing wrong. my code is below

  FPGA is not the numbers floating point (such as DBL). You can use integers or fixed numbers.

  You want to convert the DBL in I16 anyway, so do the table I16.

• Hi, can someone give me some ideas on what type/brand of usb cameras are not suitable for labview? I need to use with labview and IMAQ Cheers acquisition image vision module

  Hi, can someone give me some ideas on what type/brand of usb cameras are not suitable for labview? I need to use with labview and image acquisition IMAQCheers vision module

  Hi, I use a 1.4MP USB camera with LabView. The brand is ID - a German company.

• Google has detected suspicious activity from your computer. Please make sure that you are not a robot. Type the letters you see in the text box

  Original title: I get repeated messages from Google that says, "Google has detected.
  I get repeated messages from Google that says, "Google has detected suspicious activity from your computer. Please make sure that you are not a robot. Type the letters you see in the text box. "or words to that effect. I can't search because when I enter a keyword and click on enter, I redirected to this message. How can I solve this problem?

  This problem was reported as being caused by the ISP redirect traffic sent to google.com. This causes Google to see a lot of traffic from the same IP address, which she sees as suspicious. See this:

  http://www.Google.com/support/forum/p/Web+search/thread?TID=1c8ae8e6799f5408&hl=en

  If you are sure that you have no malicious software, that would be merit to be studied.

• my keyboard strokes are not made, unless you type very slowly and hold down the key until the particular letter is displayed

  my keyboard strokes are not made, unless you type very slowly and hold down the key until the particular letter is displayed

  Hi Kdooley,

  Are a. When you facing this problem?

  B. using a laptop or a desktop computer?

  C. is - what happens with specific applications?

  D. don't you plug a different keyboard to check?

  Method 1

  I suggest you to connect this keyboard on another computer and see if it even. If the problem persists, try Method 2

  Method 2

  Try to change the rate of repeat on the keyboard and check if it helps.

  1. Open keyboard by clicking the Start button, clicking on Control Panel, hardware and sound, tap keyboard.
  2. Under character repeat, move the repeat rate slider to the left to keyboard characters repeat more slowly, or to the right to make them repeat faster.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-keyboard-settings

  If the problem persists, then it might be a problem with the keyboard itself.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Subscribe with photoshop, but the problem is when I type in Arabic, letters are not connected they are supposed to be, please help me solve this problem?

  im a student in Visual design and currently I'm designing with Arabic typography, the problem is when I type the letters in photoshop are not connected. I tried many ways, but it seems that its does not work!

  Help, please

  Hello

  I tried many ways, but it seems that its does not work!

  What have you tried?  In preferences > Engine Options choose text (try Middle Eastern)

  Or select your text box and in > 'Characters' Panel, choose your language.

  Stone