Some function keys do not work onSatellite P850 138

Similar Questions

• Some function keys do not work on my Portege R830

  Like others, I have a new Portege R830 and experience the sudden and unexplained feature of keys loss 13 function. My os is 64-bit native windows 7 with office 2010 installed subsequently. I have the SSD model.

  I followed the instructions, withdrawal PVAT and re-setup, and I have two VAP and operational flashcards. I used the drivers of the USA site for the last series (Australian and European pilot sets are old and different versions).

  In most, but not all, function keys are working again. What does work are the following:
  -Functionkey F12 does not
  -volume up and down keys not working not - what I'm more interested - suggestions on how to make functional again please?

  also, on re - install VAP, I lost the feature on ecobutton. Suggestions on how make it work again?

  Thank you in anticipation

  Hello

  You are on the guy to the right way of the VAP and utility Card Support Flash controls the FN keys. If you have a European model for laptop, I advise to use the drivers of Toshiba page of European pilot, but generally avoid a difference in software

  However, in my case restart the cards Flash allows you to recover the functionality of buttons FN. Can be found in all programs-> Toshiba-> Flash, Flash cards cards.
  In order to verify if restart help.

  Regarding the key Eco: ECO Utility controls this button too then recommend installation/reinstallation of the software next to the VAP

• Some function keys do not work on Portege R200/PPR21E

  Hello

  FN + Esc, Fn + F2 Fn + F6, Fn + F7 and perhaps others have no effect on my Portege (Windows XP French version).
  I tried with and without Toshiba PowerSaver running.
  What should I do to be able to change the brightness of my screen manually, regardless on the options defined in PowerSawer?
  Thanks for your help

  Hello

  You will solve this problem in a simple way using BONE from the Toshiba restore CD.
  This would retrieve all of the key FN functions

  But I think that the C of recovery would be last resort am I right? ;)
  So so you can just try to reinstall the common modules, shortcut keys, and energy savings

  Good luck buddy

• C40 satellite function keys do not work outside of Windows after installed own W10

  Hello

  C10Q C40 is already a squeeze tight with only one disk of 32 GB mem. So I an install clean of W10 and everything is great, with lots of room to spare now - EXCEPT - some function keys do not work as the empty screen, while the windows outside, using a boot CD, none of them work. I need to download a driver utilities Toshiba? Cannot find it anywhere!

  Win10 drivers can be found here http://www.toshiba.eu/innovation/dow...jsp?service=EU

  Install the driver of Toshiba, Toshiba system and settings system.

• HP AC 15-AC122TU: my function key does not work!

  Hi, my function key does not work which is the reason why I could not increase or decrease the volume, brightness etc. I already saw some videos and tried to disable from BIOS. But it's not always works. Can you please suggest any driver for it.

  Hi @soumyajit1991,

  Welcome to the HP Forums! I read your post and wanted to help.

  I understand that the function keys on your laptop is not working. Please try to re - install the HP System event utility: sp76383.exe

  Let me know if it helps.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• Function keys do not work

  My function keys do not work.  I can't even the keyboard of virtual function down most of the time.  Can someone give me some ideas as to what could be the problem?

  Because you forgot to tell us something on your computer, I can only speculate. First of all:

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  1. I guess it's a laptop, but of course I could be wrong. If my CrystalBall (tm) was cloudy and it comes to a desktop computer, try another keyboard.

  2 reinstall the keyboard drivers. If it is a laptop, you can find them in the computer Web site portable mftr.. Some manufacturers have specialized keyboard like QuickLaunch from HP and Dell Quick Set software that affects the function FN. Make sure that all of the utilities that are installed.

  3. maybe you have a keyboard with the lock function? Is Numlock on? This does not usually affect the FN keys, but it's worth a mention.

  4. If drivers/utilities are up-to-date, and it is a laptop, connect a USB external keyboard. If the problem disappears, with the computer laptop mftr. for a replacement keyboard.

  If this doesn't help not or you have any other questions:

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#how-to-write

  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  MS - MVP - Elephant Boy computers - don't panic!

• Satellite P855 - function keys do not work after the upgrade to Windows 10

  Function keys do not work after the upgrade to Windows 10
  I know that I need two drivers (Flash cards support utility) and (Toshiba function Key Utility), but on the page download Toshiba is not suitable for Windows 10.
  Anyone know when and if it will be available?
  Thank you

  I'm also waiting for Win10 of things and do not know with certainty how Toshiba will start with the support of Win10. I hope that will happen soon.

• Function key does not work do not

  Recently I bought HP 15R laptop 036TU. Function keys do not work correctly. As if, press F2 it adjusts the brightness rather than change the name of the folder. PL suggest what parameter changes are required. Thanks, Nitin.

  Hello

  Please follow the instructions below:

  http://support.HP.com/us-en/document/c02035108

  You may need to use the ESC key on the step #2 (if F10 does not work).

  Kind regards.

• F4 function key does not work does not in Excel 2010

  I have a HP Pavilion series g - Windows 7-64 bit

  The F4 function key does not work in (2010 excel 64-bit).

  Any suggestions?

  ch1616

  Hello

  It may be useful to change the setting of the fn key in the bios as described in the link below to see if this has an effect on the f4 key in Excel.

  http://support.HP.com/us-en/document/c02035108

  Kind regards

  DP - K

• Satellite P300-190: function keys do not work properly

  Yesterday I HAV epurchased P300-190 laptop but my function keys do not work properly! :-(
  Do you know what may be a problem and how can I solve it?

  See you soon
  Pocoyo

  What is the problem with the keys exactly?

  Try reinstalling the added value package (PVAT). You can get the latest version from the site Web of Toshiba http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Satellite A350-13 a - function keys does not work

  I have the Satellite A350-13. I installed Windows 7 for 2 weeks.

  The function keys does not work although I have installed the Toshiba value added package, which is responsible for the activation of the function keys.

  What the solution to this problem?

  > Function keys does not work although I have installed the toshiba value added package, which is responsible for the activation of the function keys

  Next to the VAP (value added package) you need to install the Flash Utility card support!
  Card Flash utility support controls the keys FN and not the VAP! But VAP is also needed.

  Good bye

• Function keys is not working

  I have a laptop two months of j020dx m7 Touchsmart from HP Envy Windows 8.1 running old.  My problem is that the F1 through F12 function keys do not work.  Functions void such as the brightness of the screen, the volume of the speaker, WiFi, etc. work (without having to press the "fn" key).  But in programs that use the F1 - F12 function keys, that they do not work.  Pressing one keys activates the Sub-function all the time.  A possible solution to push the F10 or F2 key has produced this problem on this forum (don't remember who now) to enter the BIOS at startup settings.  Here, I should be able to enable or disable the feature keys.  But there is a catch 22 because pushing the F2 key at startup reduces the brightness of the screen which is what I call the Sub-function and not him F2 function.  I thought that the right way for the function keys work is to push F1 to F12 when it is asked in a program and when you want the Sub-function such as brightness, wifi on or off, dimming etc., press the "fn" key and the corresponding function key.  I noticed a Toshiba computer Windows 8 is the same thing.  What is a Windows problem or a hardware problem.  Anyway, what is the solution?
  
  F12

  {Excessive crossings of line deleted}

  Hello

  No doubt your keys Fn is disabled on BIOS, try this link below on how to enable Fn keys:

  http://support.HP.com/us-en/document/c02035108

  Let me know if it works...

• Brightness function key does not work in my 15-r006TU

  Hello

  My brightness function keys do not work. Other function keys like music player, mute etc work fine in my windows operating system 7. No, my model is 15-r006TU. I installed all the drivers display and checked the key parameters of the action in my BIOS settings. Nothing works.

  Kindly help.

  --

  Nandan

  Hello:

  The Intel HD graphics card appears under the category of display cards in Device Manager or a Standard VGA adapter is displayed.

  Normally when the brightness of the screen is stuck on max and you cannot change it,'re missing you the driver from the chipset, the graphics driver, or both.

  Make sure that you have installed the Intel chipset installation and restart utility as well as the Intel HD graphics driver.

• Qosmio X 500-mode 'sleep' and function keys will not work

  Hello guys!

  I have two problems with my X 500. First of all, sleep mode does not work correctly. In fact, it does not at all. When I try to put the laptop into sleep mode, it simply stops, even if it seems as if it was in sleep mode. The problem occurred recently, and I had not installed updates from the driver or just anti-virus software before. The hibernation mode works very well.

  The second problem is that some of the function keys do not (red below the power button). Namely the eco mode button, the mute button and multimedia button. This problem occurred a long time ago, and it is also likely to be due to any software installed. The other keys work fine.

  Please, help me to solve these questions, if you know how. Thank you!

  Hey Buddy,

  How are you trying to access the bar in view? For example, you can access the standby mode if you press the FN + F3 key combination.

  In addition, follow the instructions posted by Akuma. Try to reinstall the package of added value and a system restore if you have installed additional software to check what software is causing this problem.

• Numeric keypad and function keys do not work as expected.

  Keypad does not work as expected. By pressing 0 on the numeric keypad displays a "right click" menu, and the NUMLOCK is on. All other elements of the keypad work as expected.

  Function keys do not act as expected in MS Excel 2010 (e.g., F2 changes the brightness compared to modify a cell).
  With the help of Samsung model NP350VC-A01CA with Windows 8 and Office 2010.
  What I did to try to resolve:
  (1) disabled options control access Panel\Ease of Access\Ease Center\Make the keyboard easier to use (all of the checkboxes are turned off). and
  (2) uninstalled and reinstalled the keyboard driver; and
  (3) update regedit - Computer\HKEY_USERS\. Default\Control Panel\Keyboard\InitialKeyboardIndicators 2
  When the computer "wakes up" or after a reboot, it resets...
  A very frustrated user would love some help!

  Keypad does not work as expected. By pressing 0 on the numeric keypad displays a "right click" menu, and the NUMLOCK is on. All other elements of the keypad work as expected.

  Function keys do not act as expected in MS Excel 2010 (e.g., F2 changes the brightness compared to modify a cell).

  With the help of Samsung model NP350VC-A01CA with Windows 8 and Office 2010.

  When the computer "wakes up" or after a reboot, it resets...

  Ask Samsung?   Sounds like a BIOS option.   Otherwise use the Fn key as needed.

  ---