Some headphones on a c20?

Similar Questions

• headphone 3.5 mm jack does not properly after update iOS10

  Headphone Jack is not working properly since I have updated to iOS 10, now on 10.0.2, before you start, I would say that my headphones work perfectly, I tried on other equipment, including my old ipod.

  So, here's what happened, whenever I plugged and you try to play a song on music or a video on youtube, I could not get any audio, restart the phone partially solve the problem, I managed to play ringtones in the settings menu without any problem, on both my headphones and loudspeaker at the same time , which I don't know if it is planned, I think it must have something to do with some bugs in iOS 10?

  someone at - it a similar experience or a solution?

  Hi oramicle,

  On the device that you have a problem? I also have this problem on the iphone 6 s. On two different helmets. It's certainly iOS 10.x, because I don't have this problem on the same device and helmet on iOS 9.x. I sent the bug report to Apple with this description:

  After some headphone output (jack 3, 5mm) at the moment does not work on iphone 6s 128GB, iOS 10.0.1 and 10.0.2 - no sound from the headset. Volume controls and MIC still works. When I make a call with the headset plugged and tapping on the microphone, I hear sound for headphone listening, but the others its not. No noise in other applications. Restart the temporary fix of the device this problem.

• Use a headphone with iPad 2

  I would like to comment on what headphones to use with my ipad2. Do I need a particular size? And it better with the help of the plug or go with bluetooth?

  Personally, as a musician and a person who appreciates a quality sound, I will return with a headset or headphones that plug in an iPhone or an iPad.

  The sound quality is more real, more accurate.

  Most average price speakers Bluetooth headset/headphones and wireless lose quality in the bass and treble of the higher regions.

  Only the more expensive ($250.00 and upward) Bluetooth headphones/headset wireless and more expensive Bluetooth speaker systems will be the technology that compensates for the loss of bass/treble on a Bluetooth signal.

  Lower prices Bluetooth speakers, headphones / earbuds simply don't have all this bulit technology in them so that they can sell at much lower prices.

  If the budget is concerned, wired headset comes in many points of setting prices, but even some headphones/wired earphone at a lower cost price will be superior in sound quality at cheaper, wireless Bluetooth offers currently on the market.

  My vote is for headphones/wired headset.

  Good luck!

• Satellite Pro R850 - 18K - use of the combined headphone/microphone jack

  This laptop has a combined microphone/headphone plug, but I couldn't find on the helmets of the market with 4 Cinch works correctly. I have some headphones mobile with 4-pole, but if I plug it into the laptop socket, both internal microphone. and the headset. stop working.
  According to manual it work!

  On my previous Toshiba I used 2 catches headset (red/green sheets), but if I connect it to the Pro 850, micro internal. will not work.

  Can someone recommend, what type of headphones, I need to take care to be compatible with the model R850?
  -USB connection should be good?
  -the so-called plug 4 pole should work, if not cell phone accessory?

  If someone has already solved this problem, please advice me. Thank you.

  George

  Hello

  Yes, according to the user manual, you must use a 4-pin headset to get the headset working.
  If you use any other prang 4 pin two mic (internal and external) would be disabled.

  > On my previous Toshiba I used 2 catches headset (red/green sheets), but if I connect it to the Pro 850, micro internal. will not work.

  I guess this pin 2 pin will not work in this case because the laptop supports only one taken headset.
  So, what do you think about using a 4 - Pin to 2 x 3-Pin 3.5 mm Headset Splitter Adapter like this:

  

• Broken headphone jack

  I have a Studio XPS 1645, which has two outlets of output for headphones, fortunately.  One of the damaged, by a rough out of the helmet I think.  The plug is loose and always think there are headphones, so my speakers will not play.  Since I have some headphones, I can even plug my speakers in my computer and listen to music etc, but it is inconvenient.  What possible fixes are there that will allow me to reuse my laptop speakers?

  Your model has a circuit made replaceable helmet that you can replace. See section lV of the Headphone Jack FAQ for more information on getting the part. You can download a service from Dell manual that shows how to disassemble the laptop to do the repair.

  Section V of the FAQ has a software solution that should work for your model.

• Satellite C850-F211 - sound problems

  I bought this laptop 3 months ago and since then, I have sound problems. Today the noise decided to not work and I can't hear a thing. If I put on some headphones or external speakers, I can hear the sound. Can anyone help?

  I'm actually regretting ever buy this model and I do not know why I bought this laptop.

  > If I put on some headphones or external speakers, I can hear the sound. Can anyone help?

  Looks like a malfunction of the internal speaker for me.

  But have you checked the sound settings?
  Go to control panel of-> sound-> playback and check the available devices.
  The speakers in this tab? And if so, the speakers are marked as default device?

  In addition it s worth it to reinstall the audio driver.
  I guess its Realtek sound card.

  So uninstall the driver audio Realtek (Control Panel-> programs) & features-> Realtek High definition audio driver.
  Go to Device Manager and remove the device (Intel audio display) in the region:
  Controller audio, video and game.
  Do the same in the area system devices: here to remove the entry: controller high definition audio.

  So finally reboot the device.
  After restarting again, windows system should recognize the devices automatically deleted.
  Wait that the devices have been installed. Now test the sound.
  If you would get not all sounds through the speakers, or via a headset, install the driver Realtek audio.

  But if this is not enough, I recommend to contact the service provider to check the speakers

• Is this normal for retina imac to do great headphone plug sound during installation first speakers?  Some new arise as well.

  I have an imac of retina.  Since the day I bought it new, I also had new harman/kardon talking plugged into the headphone jack.  This has worked well for more than a year or two.  Recently, I noticed an occasional static or pop.  It is not very strong, it's just boring.  I went to make sure that the headphone jack was still firmly inserted on the speakers and a very strong buzz takes place when you first insert the speakers.  To be fair, makes the noise even if I touch just the end of the shooting (of speakers), as if my human energy is impacting on the speakers.   Is this normal?

  Everything seems to work very well for most Park with the imac and the speakers, once I insert them.  But they are a very strong when buzz jack of first contact with the helmet of the imac.  In addition, it seems to be a very slight whistle full time air and occasional pop of static sound.

  I moved the speaker wire to ensure that they were not in contact with anything whatsoever.

  I changed the plug for the speakers.

  I did a reset of the PRAM.

  I did a reset of the SCM.

  Another thing before I wrap up this thing and go through the genius bar appointment process?  Everything I am on?

  Thank you.

  Hello

  The short answer is no the explanation is that the headphones and speakers, both, must be in the State of "Turn off" when you connect or plug in the unit. Amplified as helmet speakers power can be "plugged hot."

  These phone can get dirty sitting and not mobile. Simply power off all devices and 'gently' work the phone jack to plug and unplug some times help you to establish a better connection. If this does not resolve the static electricity, then consider that it should be considered by a professional.

  Bravo!

• Pavilion dv6: new headphones, but some emissions are transmitting sound through speakers and headphones.

  Spoiler (Highlight to read)

  Hello

  Hello

  I recently bought a new headphones for the game but had some problems with it and the sound system. A major problem is when I have someone call on Skype, the Skype sound or the call will go through the headphones, but on the other audio from the speakers. I also agree that also what iTunes does not work when I am in a call as well. Some examples would be that if I want to watch a YouTube video during a call, noise would come by the speakers and not the headphones. However, I found a solution for this. All I had to do was turn off the main speakers and the audio was transmitted to the headphones. Another example would be that if I want to run the games through Steam (Garry Mod, TF2, ect.), I get no sound in the game. Not through my speakers or headphones. With one exception, volume of Garry Mod, I can hear through the speakers so that in a Skype call, but I want the sound to come through the headphones. But with TF2, I have no sound whatsoever. If you need more information about me, feel free to ask. Thank you.

  Hello @LayneStaley,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how some programs make sounds through the speakers not the headphones and I'd be happy to help you in this case!

  To make sure that your headphones are used when it is connected to your laptop, I advise you to follow the steps below:

  1. click on the Start button

  2. click on Control Panel

  3. click hardware and sound (the icons of sort by 'category' Control Panel) and then click on its

  4. under reading, you should see one or two speaker icons. One of them should have a green check mark next to it (which is the main speakers to your laptop). If the second speaker icon is not visible, right-click in the list of devices and select Show disabled devices

  5. a second disabled icon "speakers" should appear. Right click on this icon, then click Activate

  6. Select the device speaker newly enabled, right click and select "set as default device".

  7. click on apply.

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• Headphone Jack blackBerry Smartphones does not not with some devices

  
  

  Most likely a shift of the impedance. The phone may be looking for a manager of specific impedance equivalent to special devices such as headphones. Most headphones for telephones are in the 40 ohms range 60 ohms. Some are falling in the range of 20 ohms. The device (car radio) may be loading high impedance and therefore the phone audio driver circuits do not recognize as an appropriate charge.

  I've seen this kind of thing before. Try this...

  get a simple audio splitter to allow two headsets on the same device. On the one hand, feed the car radio. On the other side to keep a helmet or headphones that work with the phone. If it works keep pushed headphones somewhere on the side.  This can make the circuits of telephone functions as if the same.

  I've seen this kind of approach before...

• Some applications play with headphones, and some of them play in my speakers. Cannot change the default playback of helmet device.

  Original title: Headphones working strangely

  I'm having a problem with the audio of my computer. I can't change the default playback to my Apple or my Turtle Beach x 31 headset device. Some of my applications are playing through my headphones, and some of them play in my speakers. When I look at the problem online, he keeps leading me to the evolution of my default playback device. When I right click on 'Helmet of Communication' and select "Set as default device" nothing happens. Not at all. They are defined as my default communication device already, who does not even make sense, since I was on my microphone internal.

  I already tried to uninstall driver "IDT High Definition Audio CODEC". Did not work.
  Sorry if I left out important information. Tell me. I know a little about computers, but I'm certainly not an expert.
  Hello
   
  I suggest you follow these methods and check.
   
  Method 1:Follow the suggestions in this article and check.
   
  No sound in Windows:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2: Uninstall and reinstall the sound drivers.

  (a) click Start, click Control Panel.

  (b) click system and security, click System.

  (c) click on Device Manager.

  (d) develop sound, video and game controllers.

  (e) right click on the sound card, click Properties, click Driver tab.

  (f) click on Uninstall, click Ok.

  (g) restart the computer and check.

  If the problem persists, I suggest you to download and install the drivers manually from the sound card manufacturer's Web site.

  I hope this helps!

• Why are some of the songs on my Shuffle not play then that I connect it by usb to my radio Harley 2014?  The songs are all play with headphones.

  I have about 200 songs on my Shuffle.  When I connect it to my Harley Infortainment system via the usb port, the system only "reads" about 150 of the 200 and will not play the rest.  I completely wipe clean on the Shuffle.  List of new song created around 150 songs.  When I re-connected to the Harley system, the system of 'reading' 109 150.  Still, he would not play the other.

  If there is a guide to the user for the system of Harley (physical or online), you should look at the supported audio file formats.  It can only support MP3.  Maybe the songs that work are MP3 and those who do not are AAC (and other formats).  Or, it may be related to DRM (copy protection), IF you have a lot of very old iTunes Store, purchases of the song in your iTunes library, the early years when songs sold through the iTunes Store have been required to have DRM.  These songs will not play on most non-Apple devices.

• Lost headphones

  So I lost headphones that I use for the iPhone 5 s and I honestly can't remember how I lost him it is quite difficult to remember things and so I have the one year warranty so I was wondering that since I was the one year warranty is it possible if I could get some new sense of headphones that I have the one year warranty or I just had to buy a new pair of headphones with money?

  Yep, I have to shell out the money, unfortunately.

• Headphones with iOS 10

  After the update my iPhone to iOS 10, I noticed that the button on my headset does not work like it used to.

  Originally, the button could pause / play music with a tap, move on to the next with two taps, song start the song with three, etc..  Now, when you use this button as well, orders do not seem to work.

  Do you have the new software change these buttons and / or get rid of these commands?

  No, my headphones Bose still work as they did before, so the features are not degraded.

  Make sure that the ' phones are plugged in all the way.

  Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.

• Can not listen using bluetooth headphones with music Apple after updating iOS 10

  I've updated my iPad to iOS 10 Air yesterday. This morning, I plugged my bluetooth headset and tried the Apple music (specifically, the NPR radio station). It sends output to the speakers of the iPad and not the bluetooth headset, and after several attempts does not connect to the bluetooth headset. I checked the bluetooth connection and verified that I could hear Siri through headphones. But Apple music seems not to want to use bluetooth headphones, whatever it is I'm looking for.

  Any suggestions or help would be greatly appreciated.

  Hi the edema,

  It is my understanding that you are experiencing some problems with Apple's music stations on your iPad don't play no not by your Air Bluetooth headset. I listen to music Apple all the time and I know it's nice to be able to listen to the radio stations with headphones. I will do my best to help you.

  As you have noted that you can hear Siri through Bluetooth speakers, you can also try a different like YouTube app to see if you can hear the audio from there through your headphones? In addition, if you do not already made, conclusion of the music app and reopen it and try to play the station again. This happens just this specific station or any station you are listening to?

  Even if you did the following steps part of this article, to get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device, there are a couple of additional ones that can help.

  1. Make sure that your device iOS and Bluetooth Accessory are close together.
  2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
  3. Restart your Bluetooth accessory.
  4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
  5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPhone, iPad or iPod touch.
  6. Cancel pairing the Bluetooth accessory, replace the accessory in discovery mode, then the pair and plug it in again.

  Thanks for stopping by Apple Support communities. See you soon.

• My iPod touch headphone jack 6 is broken?

  I bought my iPod months ago... It is a 6th gen... 16 gb bought target...

  (and for some reason, the paint Flake on the bottom)

  In any case the last month my skull candy headphones were not working directly in my iPod. The sound was all staticky and if I turned the sound thread would go in and out. Brought to the store that I have cause I have a warenty on them. The guy said they were fine (after plunging in his phone). He said that maybe it's my camera. But gave me a new pair.

  A few days ago my helmet began to act up once again like the first time.

  movinng wire around would cause static and the sound would go in and out.

  I have it plugged into my computer, the iPad, and the Nintendo 3ds... I have moved the thread and they were very good.

  So basically fine in anythjng but the iPod touch.  Today, it got worse...

  Plug the headphones on other devices and I guess my iPod broke their.

  I cleaned the plug with a q tip... No dust or dirt.

  What could be the problem?

  tbought to get the wireless headsets, but then I can't use them on my computer or Nintendo 3ds...

  Sorry if I wrote a lot... Just disgussted... have not really money to solve this problem. Also, the headphones supplied with the iPod, the sound are really low. So I think that the iPod did something for them as well.

  Have you tried another pair of headphones?