Some parts of the sound plays not

Similar Questions

• Why some web seat is not compatible with mozilla. some parts of the website are not displayed

  Welcome:
  BILLY PIERCE

  Balance

  Can you attach a screenshot and post some links?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Why is the sound plays not after I export flash video?

  I have my audio file on the timeline, but after I export as a video audio is not playing. Help please

  I used Flash Pro as a tool, where all I wanted was the audio from the video export, and that worked fine audio mixer. I'm not positive about knowing if I use event or stream audio in the timeline panel. Try to use the event.

• Firefox support website, but some parts of the site are not displayed

  I have a vacation site that loads a calendar that shows when our cottage is booked. I need to access frequently. Since 4.0, will not appear this calendar. The loading of the page, not the calendar. I have to go back to using IE for this site. I rebooted 4.0. Can I go back to a previous version of Firefox that has worked? Or what. Thank you very much

  I worry that too. Mozilla Announces generally well in advance (at least three months) when previous versions are no longer eligible for support. At the moment, although v3.5.18 is still supported and published much earlier than v3.6.16

• In a form, how do the race to disappear in some parts of the form, but not all.

  If I have a circle with a black line, but do want the semicircle to show the race how do? Thank you.

  Make 2 objects, one to fill the other to stroke. We e digs the arrow tool to select one of the 4 points on a black circle and remove to get you STROKE black semicircle.

  

• Portege 3500 stylus works does not in some parts of the screen

  My stylus on my portege does not work in some parts of the screen parts change and are sometimes not there.
  This happened after the replacement of the screen, but not right away.

  Hello

  I agree with the previous user, and also think that there must be a hardware problem, and it should be checked properly.
  Contact service again and explain exactly what is happening. Sorry, but I don't believe you can do it alone.

• recording bass and the sound is not consistent

  I pulled in a recorded drum track and then add my bass track. Good when playing and listening to headphones but when I play back the bass track is virtually all of the sounds heard. not sure on the volume level and record level as to the definition of remedy if it is part of the question

  Hi marosennc,

  I understand that you are trying to save your bass guitar on a pre-recorded drum track, and the volume is low in the final recording.   You can adjust the bass track audio before recording it.  In addition, once the title is saved, you can adjust the volume of the bass and the drummers individually track track before exporting the file to merge the two.  I would add a few sections of the GarageBand here for you User Guide.

  Record sound from a microphone or an electric instrument

  Racing volume levels

  You can set the volume level of each track, to balance the relative volume of the tracks in your project.

  Adjust the level of the volume of the track

  • In the header of the track, drag the Volume left or right to decrease or increase the volume level.

    

    Note: You may need to resize the track header to see the Volume slider.

  • Option + click on the slider to return to a neutral level (0 dB gain).

  The level indicator in the track Volume slider shows the output volume of the track during playback of the project. You can watch the level indicator when you save to the track to see if clipping occurs on the track.

  Save more Audio takes

  What did the mix?

  When you mix a project, balance you the different parts and mix them in a coherent whole. You can also add effects to the tracks - including the main runway - to change their sound and use automation to create dynamic changes in your project over time.

  Mix generally involves the following steps:

  • Racing volume levels to balance different instruments so nothing is hidden and most important parts stand out in the mix.

  Export songs on the disc

  Take care

• the sound is not available

  I was using Oxford dictionary online ( http://www.oxfordlearnersdictionaries.com/us/definition/english/happy ). When I clicked on the button of prunuciation, a message popped up saying "Apology, the sound is not available."

  Here is a screenshot.
  https://i.imgur.com/UGSlqkm.PNG

  I tested it on another browser (chrome) and did not have this problem.

  How to play?

  Accidentally, I solved my problem. What I need is an MP3 codec.
  Step 1 - download a mp3 file, for example http://www.oxfordlearnersdictionaries.com/us/media/english/us_pron/h/hap/happy/happy__us_1.mp3

  Step 2: play the mp3 file. It is likely that the media player allows you to install an mp3 codec will tell.

  Step 3 - install the mp3 codec

  step 4 – restart Firefox

• When burning a dvd, the sound is not onto the disc any ideas?

  ive tried using media player to burn a disc and also dvd maker but having no joy, because the sound is not transferred to the burned disc

  Hello

  1. what kind of content you burn?
  2. What is the burned files file extension?
  3. on which device you play the DVD after burning? What version of Windows Media Player is installed on your computer?
  4. what happens when you play the DVD on your computer after burning?
  5. are you able to play other DVDs

  Method 1.
  Check if you are able to play this DVD on another computer.

  Method 2.
  Or you can also view by exploring the DVD if t that he burned files. Check if you can copy these files to the computer and play.

  I hope this helps.

• Satellite L30: The sound does not work on XP Sp2

  Hi, sorry but I cannot well English.

  I have a problem. I do not have CD with drivers, but I download from the toshiba site.

  Yesterday, I reinstal windows, then I install all the drivers and I have a problem with the audio drivers.
  In Device Manager is all good, his system is activated, drivers of instalation, I have no problem. But sound does not work.

  You have any ideas?

  Hello

  If the sound does not appear on your laptop, you must first check the volume control on the side of the laptop. Turn it up to the max level.
  Then check the sound devices and audio in the control panel if any controller is disabled or turned to the lower floor.

  Additional connect headphones and check if you can hear something.

  By the way: have you installed the correct drivers? On the Toshiba page, you will find two different sets of portable Satellite L30

• Hello apple.toi have 1 iphone 4S issues to buy it in a store minh.toi your old phone, then reinstall it requires icloud mem.va part of the cu.toi not know who owns the nay.toi wish apple unlock his laptop for my toi.imei my *.

  Hello apple.toi have 1 iphone 4S issues to buy it in a store minh.toi your old phone, then reinstall it requires icloud mem.va part of the cu.toi not know who owns the nay.toi wish apple unlock his laptop for my toi.imei my * .gmail: ***@gmail.com

  This is a user to user forum. To disable locking activation iCloud the owner of the iCloud account should turn off. There is no way around it. Find my iPhone Activation Lock - Apple Support  If you are unable to contact the owner or that they will not remove the lock try to get your money as soon as the phone cannot be used. -AJ

• The sound does not work on my XP system

  Hi the sound does not work on my Windows XP Pro system, while they were inspecting it stipulates that at least one of the following services does not work, Windows Audio and Windows Audio Endpoint Builder. How can I solve this problem?
  Thank you

  Hi GeraldSaurin,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  I suggest you to start the following services and check that it works.

  a. click on Start menu and enter service.msc and press enter.

  b. in the next window you will see the list of services.

  (c) in the list, locate the service and try to Start the services.

  Also run the fixit available in the link below and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  I hope this information helps!

• When I unplug my headphones the sound does not go to my regular speakers and also the reverse happened... logitech headphones... HELP Please

  When I unplug my headphones the sound does not go to my regular speakers and also the reverse happened... logitech headphones... HELP Please

  Hi MaryLitrel,

  Follow the steps in the article.

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

  How to update a sound card driver in Windows Vista and Windows XP

  http://support.Microsoft.com/kb/166774

• EVGA Nvidia Geforce 8400 GS issues: [FIXED] screen and the sound does not [FIXED] virgins

  I have a HP Compaq dc5750 I just got an EVGA Nvidia Geforce 8400 GS, and I'm having a problem with it. I disassembled the computer cover and installed, replace the cover, turned on the computer and the monitor not power not on. So I decided that I had to disable the integrated graphics card (ATI Radeon Xpress 1150), then I added the card even once. Still happens... Monitor powers on without the new graphics card. My monitor is 8 years old and lacks a DVI port. I have to connect the monitor to the graphics card to make it work? I want just this card to work.

  UPDATE: white screen problem is fixed, but the sound does not (no audio installed device) even if the audio driver is installed

  Hello

  This kind of question is mainly caused by the sound card driver is not not compatible.  Contact the hardware manufacturer directly to confirm the driver is compatible or not.

  Test the issue with another pair of speakers or headphones, or you can plug the device of reading to another port to see the result.

  In the meantime, you can also see if the playback device is disabled. To do this, please check the following steps:

  1 Please, click Start-> Control Panel-> Sound.

  2. on the playback tab, right-click on the empty square and then click on "show disabled devices".

  3. check if your playback device is disabled. If so, right-click on it and click Activate.

  1. Please click Start, type services.msc and press ENTER.

  2. double-click on Windows Audio.

  3. click on the 'general' tab. Make sure the "Startup Type" is "automatic". Then please click on "Stop" under "Status of Service" to stop the service.

  4. click on "Start" under "Status of Service" to start the service.

  Reinstall the audio device

  1. click on start, type Device Manager, click on Device Manager to open it.

  2. expand ' audio, video and game controllers ".

  3. right click on your audio device, and then click on uninstall.

  4. check "delete the driver for this device".

  5. click on OK.

  6. after that, restart the computer, the device and the driver must be reinstalled automatically.

  Please check if the problem can be solved now.

  If the problem persists, please install the latest driver of sound card on the manufacturer.

  I found the problem... once again: I had to go to the BIOS and enable Audio integrated. My audio integrated uses Realtek High Definition Audio instead of Nvidia High Definition Audio.

• Cannot use the internal mic. External microphone works but the sound is not very loud.

  Original title: microphone

  My microphone internal hp no longer works.  If I plug an external microphone into the socket, it will work, but the sound is not very loud.

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  Step 1: Try to run auto Locksmiths and check.
  Reference: http://support.microsoft.com/gp/hardware_device_problems

  Step 2: Set the default Microphone.

  a. go to Start and click on Control Panel.
  b. click on her, then a new window will open.
  (c) in the new window click on the "recording" tab and right-click in the window and click on Show disabled devices.
  d now check if the Microphone is listed there and right-click on it and choose Activate.
  e. Select the Microphone, and then click "set as default"

  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/record-sound

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]