Some programs will be not print

Similar Questions

• Some programs will not work for me as an administrator, but will work for other users on the same computer.

  Original title: some programs will not work for me as an administrator, but will work for other users on the same computer. I did a system restore as well as uninstalling and reinstalling programs that do not work without result.

  Did you run the System File Checker?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Try Safe Mode (you have this problem in Mode safe?).

  315222 - a Description of the Options in Windows XP (or Vista) Safe Mode boot
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;315222&FR=1&PA=1&SD=HSCH

  If you cannot reproduce the errors in Mode safe see if you can further isolate the cause.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

  Create another user and see if they have the same problem as your current user.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  811151 - how to copy user data to a new user profile
  http://support.Microsoft.com/?kbid=811151

  Description of Windows Easy Transfer for Windows Vista
  http://support.Microsoft.com/kb/928635

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222/#appliesTo

• HP 5510 will be not printed black before and after you installed the new cartridge. the specified controls did.

  Photosmart HP 5510 will be not printed black before and after you installed the new cartridge.  The specified controls did.

  Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.
  
  You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.
  
  If this does not resolve your problem, you may need to replace the print head.
  Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.
  
  Let me know if this can help, thank you.

• On the forms send us and receive in return, data in the form of fields will be not print.  We can view the data, but the fields to print Virgin.  How can I fix it?

  On the forms send us and receive in return, data in the form of fields will be not print.  We can view the data, but the fields to print Virgin.  How can I fix it?

  OK, it's different. These text boxes are (at least engineering point of view) not considered form data, they are annotations (or markup). On your print dialogue box, you will see a group of "Comments & Form". Make sure that the first control is set to "Document and annotations:

  

  After this change, you should see the markup of your impressions.

• I installed Windows 7 64 bit and then some programs will not install the 64 - bit while telling me that I have a 32 bit OS. How can I make sure I have load a 64-bit version only when there is a choice?

  I have create a new PC and installed Windows & Pro 64-bit. While some offer programs install both 32-bit and 64-bit as a single installation and the installation of the program checks it should install. A few programs installed 32-bit when I said to use the 64-bit. I received a message that I had a 32 bit OS and that it could not install the 64-bit version. How can I ensure that the 64-bit version is always installed when it is available. I have a program that I need it's 32-bit however.

  I also installed Office 2010 and want to know how to check if it installed 32-bit or 64-bit.
  All this is because I'm about to build a new PC for my wife and want to avoid these problems right at the front with it.
  Thank you
  Doug

  If you buy a commercial version of win7 you are provided with the installation dvd of bit versions and a unique activation key. You cannot install both versions.

  Most of the programs will install without problem in a 64-bit version of victory, there is very little that will not be installed on Windows 64-bit.

  You install programs as usual, you don't need to change any settings or install to anywhere other than their default locations. -C' IE you do not manually select the x 86 folder or any other folder.

  If the program you are installing has the ability to install a specific version of bit, and it does not work, then the problem is that options program installers, you must contact the program support

  A retail version of Office 2010 also comes with two versions of ILO.

  Having a 64-bit version of victory does NOT mean that you need to install 64-bit Office, in fact MS recommends that stick you with 32-bit Office (reason being compatibility with various plug0ins Office)

  And of course the 32-bit version of win only supports 4 GB of memory

• some pdf pages do not print but print blank

  I'm a mac (OS X Yosemite c. 10.10.2) user and have used the acrobat pro 11.0.10 xi.

  I noticed once that some pages do not print from a pdf file and after updating all the drivers for the printer, I got the same problem.

  My printer is Canon ImageClass MF 8580 CDW.

  For example, I see on the pages of 1 to 80 to a pdf document, but when printing to print only certain pages and some just get printed blank screen.

  The result is the same when I print pages or current page option.

  Anyone has same experience?

  **

  I just tried to "save under" postscript and it is saved exactly were printed virgins to print via a printer - printing of some pages and some pages.

  This happens even if I see all of the scanned pages correctly in the pdf file and I see each page in the pdf file.

  Not knowing how pdf and actual printing, it is difficult to understand what is the problem with this scanned pdf document to print all pages.

  Post edited by: Wooseok Chang

  I solved this problem-

  The problem is - a PDF scanned from a scanner is unable to print pages with only black. but printing pages with a combination of at least two colors (black + blue)

  What I've done-

  Click on "Advanced" and checked when ' Print As Image ' is unchecked.

  Then click OK and print.

  Then it printed all the pages I got hurt with, apparently to have all black.

  Sara Foresberg, personal, helped me to solve and may be able to explain why "print image" has been the key to this situation.

  It's the simple solution, but it took me a few hours... Hope it will be useful for someone like me in a similar situation.

• OfficeJet 4620 - will be not printed black - HELP!

  I have an Officejet 4620 and the printer doesn't print black ink.  Other colors print fine.  After spending $ 65, I've replaced the ink cartridges, and it would not print!

  I found the link to ""printer prints a blank Page or print no black or color ink for HP Officejet 4610, 4620, Deskjet Ink Advantage 4610 and 4620 e - all-in - One Printer Series " and followed all the instructions, TWICE, if not three times! "

  I also cleaned the printhead several times, two rounds each, and again, it will not be printed.  What to do is print the calibration reports that continue to eat my ink!   Printing reports colored pieces, but nothing in BLACK!

  This seems to be a very common problem with these printers because I have read several forums that describes the same thing, and HP does not seem a good solution or offer of difficulty or the problem.  I noticed most positions with this question end up making a private offline message.

  Before I wonder, the printer is no longer under warranty and I live in the United States.  PLEASE HELP ME!

  Hi @VetteGuy,

  Welcome to the HP Forums!

  As you have provided all the relevant information, I need to give a hand, I'll go and send you a private message to discuss the next step from here. If you are unsure how to check your messages on the forum this post, has instructions

• HP C309a: HP C309A will be not printed black, don't align

  I've seen a couple of posts similar to the problem I have.  For me the problem came suddenly.  Yesterday the printer has not worked, today no black print.  I replaced the black cartridge, even though the indicator says it was always half full.  The replacement was a new HP cartridge.  The display acknowledged the new cartridge with the screen of "genuine hp.  Still not printing black ink.  I pulled the cartridges and clean the print head, reinstalled the cartridges and tried to print.  Now, I had an alignment error screen.  I tried the hot water bath, let dry for an hour (while the cartridges were placed and sealed in a ziplock bag) and then reinstalled the print head and cartridges.  Still have the alignment error and still no black printing.  I unplugged the printer into the wall, and then repluged into it, while holding down the key "#" and press '6' on the printer keypad.  He ran the steps wondering what language and invites me to load all paper trays, then tried an alignment.  I still have the alignment error, and it would not print in black.  I retried this so many times my XL Black cartridge now read a little more half full.  Then I tried the warm water through the printhead until water in clear weather.  I double checked it by soaking in the bath hot check clear water came from the print head.  I'm dry now, but I'm not optimistic that this will be remedied what whatsoever.  Is there anything ELSE I can try?

  Thank you for responding.  The third bathroom, combination of flushing seemed to work.  I managed to do print in black.

• The files will be not print

  All of a sudden today, I have pdf files that will not print.  I can see them on the screen, but they do not print.

  I re-installed the printer files and then reinstall Adobe reader software, still does not work.  Trying to save a file from my Bank, see the pdf file, but the data in the file does not print only lines.

  Tried another document of several pages, just empty the coming pages through the printer.  Can not understand what is happening.

  Tim

  Hi takavulla ,

  Could you please share the screenshot of lines on the pages you get when you try to print the PDF.

  What version of the Adobe application ad OS dot do you use?

  Try to see the troubleshooting provided in this KB doc steps: print troubleshooting PDF in Acrobat and Reader

  Let us know if it helps.

  Kind regards

  Meenakshi

• I would like to delete some programs I do not require from the start menu to increase the startup time

  I'm trying to remove some programs in the start menu which slows down my computer and use resources unnecessarily

  Try:

  Beginning

  Run

  Msconfig

  Startup tab

  Uncheck programs that you want to stop to load at startup Microsoft Security MVP, 2004-2009

• Files queued will be not print

  Windows 7

  The printer is hardwired. I just moved.

  Printer was on wifi, but now it is wired.

  Printer series HP Photosmart Prem 310 - use offline

  It is what I see and then the 2 files in my queue.

  I click Restart click file nothing happens.

  I'm sure it's something simple, but please tell me why does not print my job?

  I used HP print and scan doctor, my test of the printer worked.

  Why it won't print what is in my queue?

  Thank you!

  You might just resintall full software functionality for the printer and let recover.

  Web site of your Pinter:

  E-all-in-one printer, HP Photosmart Premium - C310a & downloads drivers

   

  NOTES:

  • Download and install the driver software before connecting a USB cable.
  • Full feature software is eligible - Software of product Driver Installation
  • After the first initial of the software installation is complete and work, don't forget to check and install the relevant updates - check the category - updated

  Video help:

  Operating instructions: install the HP printer driver full functionality in Windows 7 (USB)

• PDF files will be not print

  Until very recently, I had no problem printing of PDF files from that PC.  Now, some people a PDF file will be printed.  Not sure what event was associated to this.  Update to Adobe?  Registry problem?  Cosmos out of alignment?  When I try to print, I get a message from Acrobat Reader that says "Document could not be printed", and then another message that says "no pages have been selected.

  In any case, I tried everything I could think of trying: uninstalled Adobe and rebooted, uninstalled the driver of printer (Brother MFC-J6720DW) and reinstalled, checked the settings defined to print as an image... nothing works.

  I'm completely stumped.

  Hi Roger,

  Please let me know the version of Adobe Acrobat or Reader & operating system installed on your computer?

  In the meantime, please try below steps: -.

  • Try to run the command of repair under the Help menu.
  • Update to the latest version of Acrobat or Reader point.
  • Try to temporarily turn off Mode/mode protected under Edit > Preferences > Security.

  You can also consult this KB document for help PDF print troubleshoot | Acrobat, Reader.

  Kind regards

  Nicos

• CouponPrinter.exe does not work. I can download and run the program, but does not, print already added the file name to the list of java exceptions

  running windows xp, update java 7 51, norton antivirus says file is ok, please help

  HI DJDOLLARROB,

  Thanks for posting, as you might expect, there are troubleshooting you can undertake to check why the download does not work. It is highly possible that the source that you have downloaded from cannot be no longer works. Is there a site that you can check to see if it does not work for them either? Also where it is downloaded from?

  Otherwise please see if scanitemswhendone is enabled: change what Firefox does when you click on or download a file

  If download hangs at the last minute (just before reaching 100%), the cause may be an antivirus software that tries to parse the file and during this process the instance of Firefox crashes.

  To resolve the issue, try disabling the analysis as follows:

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page. A list of parameters must appear
  3. Filter the list by typing in the search bar at top. Enter scanWhenDone. Now you should find the "browser.download.scanWhenDone" preference.
  4. Double-click this preference to set the value to false.
  5. Then, try to download something and see if it still crashes.

  Please reply and let us know if this helped you!

• Impression of problem if I try to print from some programs

  Vista will not display in some programs? I can print from a program and if I go to the other that it will not print, it happens on both programs. I can print all other programs at any time unless you print from these two programs first? If I print from all other programs first, it will not be printed from the other two? Strange!

  Vista will not display in some programs? I can print from a program and if I go to the other that it will not print, it happens on both programs. I can print all other programs at any time unless you print from these two programs first? If I print from all other programs first, it will not be printed from the other two? Strange!

  Printer problems in windows
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1: Check hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows Vista and troubleshooting technical issues - print
  http://support.Microsoft.com/ph/11732#TAB0

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Some programs does not open in Windows 7

  A new laptop with Windows 7 Home Premium pre-installed. Some programs will not open, Internet Explorer, Windows Media Player, after double clicking the icons a timer gets up, goes and nothing happens. Also, impossible to open the network and sharing Center, a window appears on the screen, but it is blank and freezes. The same thing happens when you try to view the settings of the firewall. Tried to do a system restore but this wedge in the initial phase, is to expire. Everything has worked the first time the laptop was used, but now these problems are happening.

  What happened between now when things don't work, and when they worked at the start? Is there an application or driver installation or any other change in Setup?
  Because things are not open, I suggest doing a restore to the time/date even earlier if possible.