Some references are dead in pdf format

Similar Questions

• Text colors are black in PDF format

  I worked on a calendar for the past weeks. I'm on Indesign CS4/Mac, printing PostScript using Acrobat 8 for proofing and high resolution press ready pdf. Which I did for years.

  In Indesign, I have the text in many colours different text boxes as the SPM 300, a green PMS and then some process colors on stuff. Converts ALL text in black when I open PDF file after distilling is done the folder. All placed images, files eps, the pictures are in CMYK color in the folder. Just Indesign text. I have never encountered this before and am puzzled. I went through all my settings to distill and can't find anything. I am went through my options of Indesign, but... not really sure here either. Nothing distinguishes, but I'm CORNFUSED!

  I inherit these files Indesign of the Agency who has donated to the provision and design of last year. They were in CS2, I think, but they were not CS4 I know that because I remember their upgrading from an old format. So I used these files from the start and just replaced the old information and updated the look. What can I say that would be useful?

  Thank you

  Troy

  If you have inherited the files you inherited the printing setting and I'm going to guess that all text in black is selected.

  Why do you use a method of 1994 to create a PDF file? Just export from InDesign instead.

  Bob

• "Acrobat and PDF Library API Reference" also available in pdf format?

  Hello

  I would like to know if there is a pdf "Acrobat and PDF Library API Reference" guide and pdf tutorials. I just found a reference HTML

  (http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/API_References/Acrobat_API_R standard/index.html)

  Thanks in advance

  Hello

  It will be updated to 8.1 SDK there will be some changes.

  Concerning

  Malcolm

• Shares of the layers disappear when the pages are replaced in PDF format?

  If I replace pages in a PDF with updates, my actions to layers seem to not keep the stock they've installed their. I check the properties and they seem to be there, but the action does not work.

  I replace the exact amount of pages and the exact amount of layers.

  Any ideas? Did I miss something if I replace the pages?
  

  I think that you need to restore stocks. The layers are not as annotations that are left in place when the underlying page is replaced. Layers (OCGS) are content page, then when they are replaced by something new, the connection is broken.

  Consider what would happen if you replace a page which had OCGS with one who is not. The OCGS being more present, all actions that naturally control would not work. Thus, even when you replace one page by another which contains the same OCSs, they are still not considered the same as a lower level and actions may no longer work.

• Satellite C855-1john - some keys are dead

  Satellite C855-1Jn

  A key is dead on my keyboard, it is not a real problem, except to enter

  My computer is off when the battery is low, and now I'm stuck in recovery menu: I have two choices, but I need to necessarily validate with the Enter key, there is no automatic choice after awhile and keyboard plugged into a usb port does not.
  I can't use the key I reassigned it does not take into account, and I can't, in the F2 menu, change the order of starting device to add the USB keyboard, because I need to confirm with "enter".

  I don't know what I can do to move this menu

  In the case where the same issue is not using external USB keyboard, the main problem must be linked to the fault of the internal keyboard and to fix it, the internal keyboard needs to be replaced.

• OT: Pictures scanned in PDF format

  Well, it's a bit off-topic, but I'll ask anyway:

  I'm working on a magazine, and someone sent me a bunch of pictures to use. That they are scanned in PDF format. I used Acrobat to perform an audit before the flight to make sure they aren't too low resolution.  They are transmitted to this review, but I don't know exactly what resolution they really are. I need to open them in Photoshop to make some retouching, cropping, etc. How I don't know what that set the resolution when I open them?

  I guess it's a Photoshop or Acrobat issue, I don't know who...

  Thank you, Phyllis

  If you need to work again, I would use the Acrobat image edit command that will run Photoshop and give you the image to work on. From there on, save as PSD or TIF and place that in your identity document.

  Bob

• Conversion of the selected items to the PDF format

  Hello world

  I would like to convert some art I have in PDF format, but... not the whole file

  all the elements that I select with a rectangle encompassing. Is there a way to do it

  with Illustrator or other product.

  Any help appreciated,

  Ted.

  With CS5, after pasting, choose object > work plans > Art selected voucher.

• I don't know my product key. I don't have a disk it came with the pc and below when I try to read I can not, some numbers are scratched and I just format my pc what can do?

  I don't know my product key. I don't have a disk it came with the pc and below when I try to read I can not, some numbers are scratched and I just format my pc what can do?

  Just installed windows 7 but I can't read my product key?

  Help me please thx!

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

  Brand

  Online order

  Phone

  Acer

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  1-866-539-3901

  ASUS

  http://eStore.ASUS.com/shop

  1-888-678-3688 or

  1-510-739-3777

  Reference Dell

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/en/backupcd_form?c=us&l=en&s=Gen

  1-800-624-9896

  eMachines

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=eMachines

  1-866-539-3901

  Entry door

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=gateway 1-866-539-3901

  HP/Compaq

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00810334&LC=en&DLC=en&cc=us&OS=4063&product=4057208

  1-800-474-6836

  Lenovo/IBM

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-4M7HWZ.html

  1-800-426-7378

  Sony

  https://servicesales.sel.Sony.com/Ecom/accessories/Web/welcome.jsp

  1-800-488-7669

  Toshiba

  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/serviceUnitVerification.jsp?orderType=SFF

  1-800-457-7777

• I have Acrobat Pro on my computer and I work with the drawing that have been digitized in PDF format. The scanners are not aligned or place because of the poor scanning process. Anyway is to align the document even if it requires me to crop or lose

  I have Acrobat Pro on my computer and I work with the drawing that have been digitized in PDF format. The scanners are not aligned or place because of the poor scanning process. Is there anyway to align the document even if it requires me to crop or lose some on the edges?

  Hi brad.

  Yes. You can use the analysis tools to straighten and crop your document. Here is a link to a new tutorial. The key to activate the sliding options recovery is to choose the option of the camera Image in the drop to Enhance, and gives you tools to set the correct page for smoothing areas.

  fundamental https://helpx.adobe.com/Acrobat/How-to/scan-Paper-documents-Searchable-PDF.html?Set=Acroba--principes t - create a pdf file

  Donna.

• Trying to save the file in pdf format and instead its projection upward as we just drop. Half of my files are beautiful and half are not. Why!

  I am trying to save a file in pdf format. It appears in my folder as a file. I have a little need to do so. Registration of the same file with different names. Some work and some aren't.

  All registration documents are called files. What determines its type is the file extension. If it goes to something else especially an extension that the file viewer does not recognize he can just say instead of his type of format file.

  First thing to try is to verify that pdf is the extension (the characters after the last period) if there is no or an extension that you recognize, rename the file, and add the .pdf at the end of the name.

  If the file is a true pdf file it will load now.

  If she does not then of two things is true. The file is corrupted sense that it must be recreated. Or the file belongs to another application that is more installed on your computer.

  Once Finally, scenario, the extension is correct and does not rename but still it says file instead of pdf.

  In this case, like acrobat or Adobe reader software was uninstalled and deleted the associated file.

  Even if the association can manually be fixed which is totally dependent on having a Mac or Windows computer, and you have not mentioned it or I forgot. You can just reinstall the program that you want the associated file. The installer will fix it for you.

  On Windows computers, the file extension may be hidden. If you have a Windows system and don't know how to change extensions to the visible, let us know. I don't know if the Mac have a similar feature.

• Error of cross-references resolved in FM 10 but even ref-s working in PDF format

  Hello world

  I ran into a problem, I can't fix: when you open an FM file in FrameMaker I get an error message stating that the document pending cross-references. Find/replace control also reveals that all cross-references in the file are broken, but the pod of cross references, I can jump up to the right terminal by clicking on go to the source.

  At the same time when I want to record the book in PDF format, these same references in the PDF file work very well: they are clickable and lead exactly to the right place. The .book and FM files are all stored locally, so no network or sharing in question. Markers added automatically, is a kind of reference paragraph.

  Could you please help me find a way to fix the links that seem to work very well?

  Thank you

  Svetlana.

  > What is a wash of the MIFID and how do you do that?

  Maker Interchange Format (readable document FM markup).
  

  In FM10 & later, I think that it is a drop-down menu item, but what it does is:

  1. Save all the files under .mif to the [last] MIF format, including the .book
     (if by hand, save in place for FM and .book to facilitate this)
  2. Close all files
  3. open files (MIF)

  If you do it manually, to the .mif file names, remember to open the files body.mif first and save it back as FM before opening the book.mif file.

  This process at least to score and can fix or correct any data structure that are not valid MIF.

• Some letters are missing when I open a PDF file in Firefox. Works fine in other browsers.

  When I open a PDF using Firefox, some letters of the words that are printed on the document are missing. In my view, that the creator of the document used a text box to add 'Draft' on it. The D is missing. I found some words are 'Negotiable no copy' and the C is missing. These same files PDF open correctly in IE and Chrome. Experienced on V22 - V25. Using Windows7

  Are there fonts embedded in the PDF file or the policy that is set as default in Options > content?

  You can right click on the text and use "Inspect element" to open the built-in Inspector and navigate the tabs fonts to see what font is used.

• When the export file .docx for .pdf on iMac functions (such as numbers, page references) are static text display - error?

  When I try to export a .docx in .pdf formatting is displayed based on the original field. Rather than show any number of page of the pdf shows "{PAGE}", for example.

  I work with Word to Office 365 on an iMac with OS X El Capitan.

  Any help? Why is it not possible to create a good ISO pdf / a file?

  OK, in my opinion, there is a setting in Word Printing Options. It will vary with the version of Word, here's an example https://support.microsoft.com/en-us/kb/326503

  Creation of PDF files will use a printing technology and can be affected by some of the same settings.

• I'm on Windows 10. A works fine until the update. How can I make Adobe Acrobat Reader (free verision) my default DC? Seems that the default value is E pdf and when I change the default in the flashes of screen reader and forms are in the same format. I ha

  I'm on Windows 10. A works fine until the update. How can I make Adobe Acrobat Reader (free verision) my default DC? Seems that the default value is E pdf and when I change the default in the flashes of screen reader and forms are in the same format. I rather Acrobat format if possible. Thank you

  Hello

  Could a right click on the PDF file > open with > choose program by default and select CD player as default PDF Viewer.

  You can do it from the control panel as well.

  This would make CD player as default PDF Viewer.

  Concerning

  Sukrit diallo

• What are the ins Add and why are they preventing me from editing seem to EXCELL in PDF format

  When I ask a report of macro EXCEL my PC says I have add-ins and the PDF does nt appear on the desktop as requested?

  Hi jorgel4073647,

  Acrobat PDFMaker add-in is a feature that works in many applications such as Microsoft applications, etc.

  If this add-in is enabled, you can convert an Office file in word and excel format, etc. to PDF format.

  To learn more, please click on the following link:

  Acrobat help. Create PDFs with PDFMaker (Windows)

  Let me know what exactly you are trying to make sure I can help you.

  Kind regards

  Ana Maria