Satellite C855-1john - some keys are dead

Similar Questions

• Satellite L50-B-127 - some keys are not working and touchpad blocks constantly

  Before leave here an apology because I'm Portuguese and my English level is very low.

  My computer is a Toshiba Satellite L50 B 127

  Lately, I noticed some anomalies which appeared me on my computer (which should take about a year). When I speak of anomalies refer to the keys you use rarely, and at this stage do not work (example: arrow left, Z,...)
  Not to mention that I noticed that my touchpad is constantly blocking, that is to say after the buttons to work, the cursor does not move, being sometimes more than 20 seconds to wait for the cursor to return to normal.

  If anyone has had this problem or knows the cause and the solution? Recognizing a response as soon as possible

  Hello everyone, I'm here to post my problem that has caused me a lot of problems and troubles and especially apologize because that throughout this text should meet several errors since my English level is low

  My computer is a toshiba satellite L50 B 127 and has a little more than a year of use

  Lately, I found some anomalies in my computer including some keys from one day to the other crashed, these keys are not widely used (arrow to the left, z, dash). In addition, my touchpad has been constantly block of minutes in minutes, even if the buttons on the touchpad still work, the truth is that the block cursor for a few seconds and then comes back to work as if nothing had happened. In 10 minutes, however this situation occurred four times

  I would be grateful if someone knew the reason why this happens or even the solution to answer me as soon as possible

• Satellite P300D-130 - some drivers are missing on Vista 64-bit

  Hello, I own a Toshiba Satellite P300D-130, model serial PSPDCE-000009FR, 78055027.

  I installed Windows Vista Edition (letters) Home premium 64-bit.

  Since this installation, no network adapter is detected, nothing appears in the administrator of ring road (ring road) of the NIC (map).

  In addition, there is a category in the ring road (peripheral) administrator the other roads (peripherals) of the ring "with ring 4 roads (peripherals) pilots (drivers) who are not installed (code 28):"
  -Mass storage controller, identification of hardware (equipment) N: PCI\VEN_1217 * DEV_7130 * SUBSYS_F F501179 * REV_01
  -Ethernet controller, N to identify material: PCI\VEN_11AB * DEV_4355 * SUBSYS_FF501179 * R EV_12
  -ring unknown road (peripheral), N to identify material: HDAUDIO\FUNC_02 * VEN_14F1 * DEV_5051 * SUBSY S_1179FF50 * REV_1000
  -ring unknown road (peripheral), N to identify material: USB\VID_0BDA * PID_8197 * REV_0200
  Finally, the graphics card is reported:
  -Standard VGA graphics card, identification of material PCI\VEN_1002 aboard N * DEV_9591 * SUBSYS_FF501179 * R EV_00 with a code 10 indicating that it cannot start.

  I downloaded the update to the BIOS for Vista 64 on the Toshiba site, but nothing has changed.

  Thanks for votrre help.

  Hello

  It seems that some drivers are missing on your laptop. ;)

  To solve the problems, you must download and install the drivers on the Toshiba site. You will find all the drivers for your Satellite P300D:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you have any other questions, please let us know!

  Welcome them

• Satellite Pro M50 (PSM55E-001001EN) - some keys are not working

  Hi all

  Ive had a problem with my keyboard on the above model. Initially I thought it was just the keyboard, so I bought another one and installed it and it did the same thing.

  Problem:-r button and there does not initially new keyboard works not at all just by typing randomly!

  This could be an internal problem or I just bought a duff keyboard?

  Thanks in advance for your help.

  Tim

  Have you tried with an external keyboard?

  To be honest, I think that there is something wrong the keyboard, but you can check with the outside.
  In the worst case the internal keyboard should be exchanged.

• Satellite L300D-135 - some keys stop working after a few minutes

  Satellite L300D-135 (PSLC8E-02P013EN) portable model, boot cold keyboard is fine. As things warm up the keys R and there stop responding as do 7890 keys. May be heat related.

  The keyboard has been replaced, old and new are doing the same thing, so it's more like a controller issue. Have flashed the latest BIOS as saw talk of the keyboard problems in one of the versions of the BIOS. The end user has been tolerated for a few months, but now, Dyslexic child needs to use the laptop and cannot deal with dead keys.

  Any ideas? Laptop is 2 weeks out of warranty and user end just asked me to take a peek, problem has been around for the warranty period.

  Phil

  Hi Phil

  Can you notice the question even if you connect an external keyboard or this only happens with an intern?

  I can t imagine it has something to do with the heat, but if you want you can clean your laptop using a jet of compressed air. This could blow out the dust from the cooling fans.

  If this isn't the case, you must replace the entire keyboard. Normally it of not so expensive so Don t you worry not about it. You can also ask your ASP if they can repair as a gesture of goodwill.

• Satellite L650D-178: some keys Fn does not

  Hello

  I have a Satellite L650D-178. And for a while some of my Fn - key functions do not work.
  As volume & brightness up & down still work, but I can not (of) active the wlan or go into hibernation. Also the overlay is not displayed (as in this picture :)

  

  I tried the good update but could not find anything that solved my problem.
  Does anyone knows how to fix this?

  Satellite L650D-178 was preinstalled with Windows 7 system.
  I guess that you are still using this operating system...

  In the case of Windows 7, you must install the Toshiba value added package
  If the VAP is already installed, uninstall the package, clean the registry with CCLeaner (freeware utility) and then install the driver Toshiba UE page VAP.

• Satellite Pro A10 - some keys not working only not with the new keyboard

  Hi all

  I hope some1 can help with this

  I have a Satellite Pro A10. The prob I have is a.b.n.and enter keys do not work and this is a new keyboard
  I hooked my other A10 and all keys work so the keyboard is fine.

  Everything works fine with the usb keyboard. Mother board everything seems ok.
  Any help please

  Chris...

  Post edited by: widgy

  Hello

  Why do you think the motherboard is ok?
  Maybe it s a controller keyboard problem
  Did you check if the cable is correctly connected?

  In my opinion if you are sure that the keyboard is ok 100% the problem to be attached to the motherboard because there is no other party that is placed between the keyboard and the mobo.

  Good bye

• Satellite U300-152: keyboard keys are mixed up

  I have a newly purchased U300-152 with OS vista home premium 32-bit already installed by the distributor in Saudi Arabia.
  I observe some of the keys on the keyboard are mixed to the top for example shift + 2 should give us @ and shift +' (apostrophe) should give us "(quote), but the reverse is Maj sense + 2 gives me" (quote) and shift +' (apostrophe) gives me @

  Any solution for that to be corrected.
  What should I do?

  Thanks in advance.

  Hey Buddy

  Don t worry, it s not a serious problem ;)
  It seems that you keyboard language settings don't match the keyboard layout.

  You can solve this problem very easily by changing the language settings in the control panel-> Regional Options control & language-> language-> details tab

  I guess that you keyboard language settings are set to English * (UK) * '. '.
  But maybe you should choose an English * (US) * to assign the right signals to the single keyboard keys.

  Check it out ;)

  Welcome them

• some keys are not working on the keyboard.

  Original title:

  Keyboard problem?

  Hello

  I got a laptop HP with windows 7, I removed the hardrive and put it directly into another laptop. All except 3 or 4 keys on the most recent work. I think it's because they are different models, how can I reset the settings or drivers for the keyboard?

  Thank you!

  Hello Castingman,

  Please keep us updated on the status of the issue.

  However, before I would need some information to help you best.

  1. What is the brand and model of the keyboard?

  2. the problem occurs with another keyboard?

  I suggest you try the following methods:

  Method 1:

  Try to use this keyboard on another computer and see if the problem exists. This will help determine if the problem is the keyboard or computer.

  If the problem disappears with another keyboard and occurs on the other computer with the keyboard, so the keyboard is defective and must be replaced.  If the new keyboard also has the same problem, then it's probably something with the computer and not the keyboard.

  Method 2:

  Log on to the computer manufacturer website and update the latest chipset drivers and other updates to the device driver.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Microsoft Natural 4000 ergonomic keyboard with IntelliType 8.15 64-bit for Windows 7, some keys are not function (new, open, undo, redo, fence, etc.) in Office 2010

  Hello MSFT sensi.
  I need help. I have the Microsoft Natural ergonomic 4000 keyboard with IntelliType 8.15 64-bit for Windows 7 installed. I run on a brand new i7 with 9 GB of ram and 1 TB of hard drive.  I just installed Office 2010.  Have you tested this keayboard with Office 2010?

  I bought and returned 2 of these keyboards at my local dealer and two keyboards have the same problem. Preconfigured keys (help, undo, redo, new, open, close, reply, fwd, send, spell, save and print) F1 - F12 do function not all as they are indicated in MS Word 2010 etc. I was able to program my favorites 1-5 with little problem.

  I did the following to try to resolve the problem:
  1. research of virus (clean)
  2. uninstalled the driver and downloaded the last strand 8.15 64
  3 entered the keyboard layout configuration and reset the default settings
  4 tried to manually program the F1 - F12 function keys

  NONE of these things solve the problem.  Which brings me to the conclusion that this keyboard does not have to be 100% compatible with Office 2010.

  Any suggestions / feature of configuration problems feature keys?

  PS. No, I didn't record this keyboard, because is it not there no solution - he goes back to the retailer.

  To the right of the function keys, there is a key LOCK.

  Toggle this button to toggle between the keys F1 to F12 with their usual function and the functions listed in the relevant programs.

• Some references are dead in pdf format

  (FM12 unstructured on Win7, but it's probably earlier FM12).

  A thread exists for this in another forum?

  I see inconsistent behavior of cross references. On the band FM, Ctrl + Alt + click still works.

  In the file pdf, by clicking on some cross references works while others died.

  When I delete all content of the FM source file, save, and then create new simple targets and references to them two, FM and pdf behavior is as expected. No dead links.

  When I create a new file of FM one of the blank templates, then create new simple targets and references to both of them, behavior in FM and pdf is as expected, as in the previous example. No dead links.

  So maybe my real FM file is corrupt?

  Perhaps, but wash MIF, the file doesn't seem to help.

  UH: help!

  Best regards

  Optimize your book for the PDF file.

  1. Open your book file.
  2. Choose Format > Document > optimize PDF size > Options
  3. Define dialog as follows:
     Optimize the size of: [all related Documents]
     Files previously optimized: [force optimization]
     When opening command prompt: [disable]
     Prompt registration: [disable]
     Optimized files: [overwrite existing files]
     Errors: Cancel On Error: [to test]
  4. Click on Set
  5. Choose Format > Document > optimize PDF size > optimize the file

  There might be some dialogues more click on OK or some other defect. FrameMaker must then state it has optimized the files n , where nis (or higher) of the number of documents in your book. If I have the details wrong, RTFM.

  Save as PDF and everything should be OK.

  If that doesn't work, then save as PDF again once. In the PDF Setup dialog box, choose the links tab check the box «Create named Destinations...» ». This will create a PDF file that is much higher, so the first option is the best if it works.

• Re: Satellite L505-13N - some keys appear when I write something

  Hello! I have problem with my keyboard. I don't know why, but when I write with a few keys apprear 40 with letters and numbers. Avec0 space appears the zero (0)

  CAN0 you help me please?

  Hey Buddy,

  Since when have you noticed this behavior and also if you use an external keyboard? Using an external keyboard, you can determine if this hardware or software problem so I think this would be the easier and faster way to check what the problem is exactly.

• Re: Satellite C650 - some keys do not work normally

  Toshiba Satellite C650 series, reinstalled Windows 7, problem with the keyboard, some keys do not work normally, some keys are intchanged... for example. the sign @ is located above the right shift key but now the types of the '2' i.e. the SHIFT key functions of these keys are reversed... the same with other keys 2-3... What is the problem? How to solve it?

  Thank you & best regards

  You have preinstalled Windows using original recovery image, you got with your laptop (Win7 preinstalled Toshiba)?
  I ask this question because I want to know if the keyboard is compatible with the language of the OS.

  Have you tried to change the keyboard input language?

• Satellite X 200-how clean some keys on the keyboard

  Hello.

  I'm looking to remove a portion of each of the keys on my keyboard and clean.
  Some keys are starting to feel 'sticky', and I don't want to be cleaning them up and so on.

  So, I'm having issues actually remove the individual keys. Like a laptop keyboard, I'm doubting you can just 'pop' out the keys with a needle or similar object. So, how do I remove them?

  Quick Edit: as the title suggests, it's the Toshiba X 200.

  Hello

  You mean you want to delete only the caps key?
  Yes it is possible and the caps are glued on the keyboard!

  So you can remove it carefully using a thin object.
  You can out simple plugs with care.

  I did very often to clean the space under the caps of buttons!

• Satellite A200-PSAE6E - FN key not working not not on Vista 32-bit

  Hi all

  I can't get the FN button to work, no matter how many times I reinstall the software of Toshiba, it doesn't seem to work!

  Anyone got a workaround?

  I use 2.40 BIOS and Vista 32 bit

  Hello

  By using the Vista operating system on laptop Satellite A200, the FN keys are controlled by Vista Flashcard Utility.
  This tool is a part of the added value Vista package and therefore this package needs to be reinstalled on your system!

  But before you start with the installation of VAP, the VAP installed older must be removed first.

  Check it out