Someone at - it problems of heat upgrade to a 7200 RPM HARD drive in a MacBook Pro 13,3 "2.5 GHz Core i5 (A1278) - mid-2012, MD101LL/A?

Similar Questions

• Is it possible to upgrade the Satellite A100-906 with 160 GB 7200 RPM HARD drive

  Hello guys,.

  First of all, I would like to congratulate all the people here for their good advice.
  As for my question, I want to upgrade my HARD drive. I have the laptop A100-906, which has a drive HARD 100 GB 5400 RPM Hitachi.

  The hard drive, I would like to buy, is also Hitachi but with the highest capacity (160 GB) and RPM faster (7200 against 5400).
  I wonder, if my laptop supports this drive and if I have problems with temperature and noise, because the HARD drive runs at 7200 RPM.

  To summarize the above, is it really useful to replace my old 5400 RPM HARD drive to a new 7200 RPM?
  Should I buy a new one with 5400 RPM to avoid having problems of temperature and noise?

  Please let me know your opinion and thank you in advance.
  STL

  Hello

  As you already know we can only speculate on the size of the HARD disk
  In my opinion the 160 GB would be possible. But it s just my personal opinion.

  In any case, the higher speed (7200 RPM) HARD drive should be a problem. I noticed that many laptops use 7200 RPM HDDs and 5200 RPM. So I imagine that the heat produced by the HARD drive shouldn't t increase the level of temperature at a critical level.

  Greetings

• Satellite P30-116 - 7200 RPM HARD drive upgrade?

  I intend to replace original 100 GB 4200 RPM HDD in P30 with new model 7200 RPM.

  I'm looking at any 2.5', P - ATA, 100 GB, 7200 RPM drive HARD model I can find.
  On my list are these 3 models:

  - Seagate Momentus 7200,1 (ST910021A)
  http://www.Seagate.com/CDA/products/discsales/personal/family/0, 1085,669,00.html
  - Hitachi Travelstar 7 K 100 (HTS721010G9AT00)
  http://www.HitachiGST.com/HDD/support/7k100/7k100.htm
  - Hitachi Travelstar E7K100 (HTE721010G9AT00)
  http://www.HitachiGST.com/HDD/support/e7k100/e7k100.htm

  I worry especially about the overheating problem.

  Is there someone who has experience with this drive? s in P30?

  OK, I noticed that E7K100 operating temperature 40 ° C and 7K 100 a 55 C. This avoids E7K100.
  Now I have to choose from:
  -Seagate Momentus 7200,1 (ST910021A)
  -Hitachi Travelstar 7K 100 (HTS721010G9AT00)

• My hard drive on my MacBook Pro SSD upgrade

  My MacBook Pro Retina13.

  2.6 GHZ INTEL CORE i5

  8 GB 1600 MHz DDR3

  OS X 10.8.5

  Intel Hd 4000 768 MB graphics card

  Original memory SSD SM256E, I would like to upgrade to SSD 1 Tera.

  TI is possible?

  This is a very popular source: http://eshop.macsales.com/shop/ssd/owc/macbook-pro

• Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  It is not possible to update the version of Aperture is 3.4.5

  What can I do?

  You can only update if you have a version of the AppStore of Aperture - if your version of Aperture appears in the history of your purchases on the App Store. Update and then reinstalling.   See this tip of the user for more details:

  Update to Aperture 3.6 after the publication of Photos

• Problem upgrading to 4K Advanced Format hard drive (Windows Update)

  I am running Windows 7 Professional 64 bit, on a Lenovo ThinkPad W500 laptop. I am trying to upgrade my Seagate 320 GB hard drive for Western Digital WD-Blue 1 TB. The new drive has 4K (Advanced Format) sectors, as opposed to the sectors of 512 bytes, which seems to be the cause of some problems with Windows. The operating system loads, however, Windows Update will not work, and various programs give strange guests.
  The old drive was cloned to the new using Acronis True Image WD Edition. Alignment has been checked using Acronis WD Align. I clone the old drive. cleaning Windows installation is not an option.
  Microsoft has this article for what seems to be my problem: http://support.microsoft.com/kb/982018. I have already run this file (before the cloning), but the problem remains.
  Online, I've read that it might help to install Intel RST 9.6 or later version. My Device Manager lists currently Intel ICH9M-E/M SATA AHCI Controller (under IDE ATA/ATAPI controllers); This is the version of the driver 8.9.2.1002. I tried updating the driver, but without success: I just got the message, "Windows has determined the software driver for your device is up-to-date.»
  Help is greatly appreciated. Thank you very much. I am running Windows 7 Professional 64 bit, on a Lenovo ThinkPad W500 laptop. I am trying to upgrade my Seagate 320 GB hard drive for Western Digital WD-Blue 1 TB. The new drive has 4K (Advanced Format) sectors, as opposed to the sectors of 512 bytes, which seems to be the cause of some problems with Windows. The operating system loads, however, Windows Update will not work, and various programs give strange guests.
  The old drive was cloned to the new using Acronis True Image WD Edition. Alignment has been checked using Acronis WD Align. I clone the old drive. cleaning Windows installation is not an option.
  Microsoft has this article for what seems to be my problem: http://support.microsoft.com/kb/982018. I have already run this file (before the cloning), but the problem remains.
  Online, I've read that it might help to install Intel RST 9.6 or later version. My Device Manager lists currently Intel ICH9M-E/M SATA AHCI Controller (under IDE ATA/ATAPI controllers); This is the version of the driver 8.9.2.1002. I tried updating the driver, but without success: I just got the message, "Windows has determined the software driver for your device is up-to-date.»
  Help is greatly appreciated. Thank you very much.
  I believe that the problem has been resolved, I downloaded Intel RST 9.6.0.1014. The latest version could not be installed on my machine and slightly older than more recent knocked out of my DVD player. Older than 9.6 had the problem with allowing a training of 4K, but 9.6 seems to have been appropriate.

• upgrade ram from 4 GB to 8 GB of macbook pro mid 2012 will increase performance?

  Upgrade ram from 4 GB to 8 GB of macbook pro mid 2012 will increase performance?

  Please download and install EtreCheck from http://etrecheck.com/

  Run it and post the report here.

• Due to a hardware problem, I had my logic board and replaced hard drive. How can I do to reactivate older versions of adobe products? (Acrobat, Illustrator and Photoshop)

  Due to a hardware problem, I had my logic board and replaced hard drive. How can I do to reactivate older versions of adobe products? (Acrobat, Illustrator and Photoshop)

  Old version download apps:

  CS 6:

  https://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

  On the same page, you will have the possibility to download other versions.

  

• Satellite A35-S159 - can I upgrade the CPU, GPU and HARD drive?

  Hey

  I have one in my possession and I wanted to make a good game.

  I don't know if I'll be able to cause. It hurts thinking may be able to put a processor duo or quad, and I do not know if the CPU will be able to support a really good graphics card, and I also think about changing hard drive.

  Any1 know what hard drives are compatible with what I can use which are good for games?

  Hello!

  I m wondering that you want to upgrade this old notebook. In my view, that a new laptop would be a better solution.

  On the CPU and GPU upgrade I can only say s is not possible and not Toshiba support. The GPU is soldered on the motherboard and t can be exchanged.
  I think you should read this: http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  The HARD drive can be upgraded. This isn t a problem.
  AFAIK the A35 Satellite is equipped with a s IDE HDD and this means that you buy a drive HARD IDE interface up to 128 GB.

  Good bye

• How to upgrade the size of the hard drive and transfer all THE OS/software/data (image) of the original disk?

  HP desktop with a HDD normal computer. Win Vista 64-bit Windows.  But the question is generic for another one with Win7 and another with XP.

  The problem is that I want to do is to replace the hard drive with a new fresh Plus unit.  I want to keep exactly the same software as that on the original disc.   I want to know how to transfer data from the old disk to the new image.   I remember the old days BACK to copy just the files copy very well, but OS files data files and startup records, etc. etc. should be in areas on the disk, so you can not just copy the.  I know there are software packages ghosts to even a backup image to a computer, to recharge on a true double drive on a death warrant of the disc, but is it the same path to use for an upgrade?   Then, there will be no problem with MS or others by looking at the serial number of the disc material and decide on their software are installed on a new machine without a license?  etc.

  All experienced suggestions would be appreciated.

  IE brand disks: Seagate, WD, and a few others provide the software with the package of disk or from the Web site that allows cloning on the same drive size, but for a larger drive.  Acronis will be similar.  As long as the size of the disk is not unreasonable, they do it quite easily.  Depending on the age of the system, however, some may not tolerate the readers more great or the more recent huge 2 TB.

• The upgrade of the internal SATA HARD drive for HP Pavilion dm4

  Hello

  I have the HP dm4 - 1150 bought ea I think in December 2004.  It has intel core i5 and 500 GB of HARD drive.

  It works very well.  I ben hae wanting to upgrade the HARD disk but hard drives SATA 2.5 inches for this ability were not available.

  drives internal SATA 2.5-inch 2 TB for laptops are now available.  The OEM version seems to be available for about £80 in the United Kingdom.  Has anyone successfully updated your laptop HARD drive?  Does anyone know if I buy and install the new 2 TB SATA HDD if it works.  If not why?

  Would appreciate a response from anyone who has tried this on dm4 or similar computers HP laptop

  Thank you

  If it's the original drive it is SATA-II as SATA-III was not then invented. Confirmed here:

  http://www.wdc.com/wdproducts/library/SpecSheet/Eng/2879-701275.PDF

  You can replace it with a SATA-III disc without any problems. They are perfectly backwards compatible. Your motherboard is a SATA-II at best and could even be SATA - I have but I do not.

  I avoid the biggest current disks because drive manufacturers must invent new technological tricks to squeeze more and more zeros and ones in the same size box and it takes time to work on the kinks. Right now, 1 TB is the sweet spot for the readers of the laptop and 2 TB or 3 for desktop drives. Stay with a 1 TB drive 7200 rpm or still a hybrid drive of 1 TB would not a bit of extra money.

  http://www.Newegg.com/product/product.aspx?item=N82E16822178340

  Hope that helps.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Problems with Windows 7 reinstallation on the new hard drive

  I bought a computer a few years provided with Windows Vista. I then almost immediately installed Windows 7 on it as an upgrade. Recently, the hard drive failed and I bought a new one. I then installed the version of Windows 7. However, I have when I entered the product key, he told me that the key was invalid. What should I do now?

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  --------------

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• How do I reinstall Windows 7 Upgrade disk on the new hard drive

  Hi all.
  I had a hard drive crash on my Dell XPS420 who settled with Vista. I've upgraded to Windows 7 (from the offer of activation of 3 site) about 18 months ago. I am trying to buy a new hard drive and install Windows 7 onto the new drive. I only have 7 disc ultimate improvement. I don't have a Vista disc. What is my best course of action? Thanks in advance for the help & support.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Resources:

  See the instructions in the thread following the reinstallation of Windows Vista:

  http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/repair-man-removed-windows-vista-and-installed/f4ec610a-856b-47a6-9ac2-7d5f07763eb0?msgId=343a6389-3a13-46d1-93fa-342f6a9b8ae1

• Scanned copy file problem Adobe XI to the directory on the hard drive - the program just hangs up

  Adobe Acrobat Ver XI is a disaster which caused hours and hours of problems.  When bought and installed on May 9, 2014, it seemed to work OK. He left in the fall and finally, after having tried everything I could think and find suggestions for web, I called 800-833-6687 and, finally, talked with someone who did a fix when I transferred the ability for him to remote (case # 0185474926). He leaves again with no possibility to transfer a file a couple of weeks - even once, I tried everything, but the last resort of the call today no longer works. No contact is possible on this line more-

  I used to think that Adobe has been a very good company, but my respect for you and your products has fallen.

  Y at - it anyway to repair this capacity for analysis of a file and then save it to a hard drive?

  In fact, I was able to scan and save the three files (page 1 and 2) earlier today, when I removed completely all adobe plate hard and then reloaded the original installation - but now it still doesn't work anymore!

  Document PDF of Cloud services

  [discussion moved to creation, edition & PDF export forum]

• Upgrade to the new operating system on the old MacBook Pro

  I have an old MacBook Pro (13 "mid-2009). I can't upgrade to macOS Sierra because it is not supported. However, it has currently Mountain Lion installed on it, and I wonder what is the best route to find/install El Capitan now that it has been removed from the App store since the release of macOS Sierra.

  Thanks for any help.

  Click here for El Capitan.

  (144959)