MY dell studio one 1909 screen problem

Similar Questions

• What to do when dell studio one 1909 screen is not calibrated

  I have effectively had to completely reinstall windows 7 on my computer due to a problem with the system and when I reinstalled all the software I found that when I start the software system touch will work on the login screen but once the computer is in touch is no longer work.  I tried to run the calibration of touch and it will turn on and will recognize that you are touching the arrow screene will always go to the top right of the screen and never go to the next part of the screen.  I found this key works perfectly with the program of the battery and that's it.  It's very strange how ts acting.  I have re-uploaded the application of touch screen without changing the performance so I am at a loss.  Of course, my mandate has missed 18 days ago go figure!. Any ideas?

  Hello

  Method 1: Clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 of section of boot KB929135 to the computer in normal mode.

  Method 2: it seems that the drivers are not updated on your computer. So, I suggest you to update the drivers and check if that helps.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  You can download the drivers manually and install from the link below.

  http://www.dell.com/support/drivers/us/en/19/ProductSelector/Select/FamilySelection?CategoryPath=all-products%2Fesuprt_laptop%2Fesuprt_studio_laptop&Family=Studio&DisplayCrumbs=Product%2BType%40%2CLaptops%40%2CStudio&rquery=fkey-e-Drivers_PS

  Also, here are a few items of assistance that could help you with this. You can check those.
  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_737099F9F10135FBE040AE0AB6E14629&isLegacy=true

  http://support.euro.Dell.com/support/topics/global.aspx/support/KCS/document?c=za&cs=RC1078563&l=en&s=pad&docid=DSN_737099F9F10135FBE040AE0AB6E14629&isLegacy=true

  I hope this information helps you!

• Dell (All in One) Studio One 1909/19 power start mystery

  A friend asked me to look at Studio One 1909 sister who does not illuminate.  She brought to Best Buy for repair and was told it was the motherboard and don't bother fixing.  When the computer is connected for the first time in the CD eject light doesn't light up for a short period and then goes out, no. fans no beeps... nothing.

  I tried a few things to get started, unplugged power wedge, CMOS battery check button to delete all connections etc... but he seemed dead and I was coming to the same conclusion that the technician at best buy, maybe bad power supply or motherboard dead.

  I called my friend and gave him the bad news and then he told me that he had the computer running after that he brought home from his sister's House.  He said all started and went very well and he left him when he went to sleep and when he woke up the next day it would not start no matter what he tried. He asked how the motherboard could be dead if he was running so well for 1 day.  I decided to give another glance to the computer.  I removed the power button checked, checked all the connections of power once more and did not find any obvious problems.  I plugged the computer while I had it put on the table, face down and left for a period of time before I went back to it.  I stood the computer up and to my astonishment started computer and everything went perfectly.  I was curious about what I touched to start.  My excitement lasted only until the next morning, when the computer will not turn on.  I came to the conclusion that the face of the computer down was the thing that allowed me to start the computer.

  I worked with the computer for a few days and understood that he would in a kind of "Eve" from 1 to 02:00 and to restart I have let face down for about 1/2 hour before starting the system.  I tried different things every night, unplug overnight, leaving to run, stop and leave it plugged in, and the results were the same every morning, regardless of how I left the computer the night before, he would not be running.  Last night after I left the computer face down and this morning I put it up and it starts right now.

  My theory is that some sort of pressure is put on the touchscreen sensors placing it face down and he wakes up the computer.  I tried many things before I discovered this trick.  I went to the CMOS settings, the first day I was able to start the computer and the only problem I noticed was that the date was wrong, so I fixed that and all reset the default settings.  I put the power options in windows to never go in mode "sleep" but I don't think that the operating system is in any way related to this problem as it would go in this hibernation even when unplugged.  I still think it's a motherboard problem, but do not know what could be the cause.

  I tried to update the BIOS A04 Version but I read in the forums about the systems in brick after the BIOS flash and I don't want to risk it with someone elses computer.

  Anyone have any ideas on what could be the problem?

  Dell Studio One 1909

  BIOS Version A04

  Pentium (R) Dual - Core [email protected]

  Memory 4 GB 800 MHz

  Windows Vista Edition Home Premium 64-bit

  I SOLVED it! My RESOLUTION was to buy a new power supply from DELL! Part # M117J. As soon as I gave up and connected the wires... I was able to press on the button / stop and HOP! He lit. Now, I'm going to fit everything back together... but I am sure that the Power Supply swap is the right way to go for the wrong unit we all! See you soon!

• Webcam problems - Studio One 1909

  I have a problem with my webcam on my Studio One 1909 desktop.

  When I run the central webcam I am informed that I have to 'close the other video streaming to start video' to use the webcam.

  I just reinstalled Vista x 86 using the Dell Factory Image Restore function and that you have installed Vista SP2.

  Any help would be greatly appreciated.

  George

  Webcam turned out to be defective and was replaced under warranty.

  The driver for this device is here - Studio One 19 Creative Webcam

  Test with AMCap demo v1.3.11.2 (live show)

• Help need drivers for Dell studio one 19 windows 8

  Hello..

  I have a dell studio one 19 touch screen... I have install windows 8 64 bit on it. and all the drivers when they are well.  However I have problems with the set screen Generict PnP monitor and other features like the coprocessor.  I can't use the screen as a touch device as right need driver.

  So can someone knows these drivers?  I enjoyed a lot of help.

  AACM

  Hi AACM.

  Dell has not tested 19 Studio with Windows 8. For more information, refer to link: http://dell.to/U7cW0Q

  You can try to install 'Nvidia MCP, 7A', 'pilot NextWindow Touch Screen' and the Application in compatibility mode (for windows 7) and see if it works. To learn more about compatibility mode, you can refer to link: http://bit.ly/WcIF2t

  Answer please for more details.

• Dell studio one 64-bit operating system

  I have a Dell Studio one operating system 64-bit and need to know if I can install a 32-bit operating system on his computer without any problem.  I have several programs that can only be used on a 32-bit system. Please tell us if this can be done and what to buy to do.

  http://support.Dell.com/support/downloads/index.aspx

  Check on the Dell site above to ensure that the Vista 32-bit drivers are available for your model computer.

  You must then buy a license and Vista operating system 32-bit full disk and do a clean install of the 32-bit operating system.

  How to do a clean install:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Since Windows 10 on Dell Studio One, impossible to scan with Pixma MG3100

  Since the installation of 10 window on a Dell Studio One, I was unable to analyze with a Pixma MG3100. I tried to install mp68-victory-mg3100-1_02-ea24, but only the driver of Canon IJ function tool made.  Although the Canon IJ Network Scanner selector EX appears in "Programs and features", it does not show an icon on the desktop.  Turn off the Avast firewall did not help to install.

  An older Dell desktop computer and a PC even older Toshiba laptop using the same printer, but have not had this problem after moving to Windows 10.  (Apparently Dell has nothing to do the Studio One ready for Windows 10.).

  I have somehow missed the essential.  I had to only add the Solution Menu ex and MP Navigator EX 5.0 strangely, I couldn't find the first site of Canon in Thailand and the second in Singapore.

  jamesomorse

• Dell studio 1558 fan noise problem

  Hello dell.

  I wonder how many people got prob with studio dell 1558, just google and found most of them (all) having prolem with the dell studio 1558 fan noise.

  What happens in my case:

  The fan noise was ok before a few weeks ago, and he started 2-3 weeks back. aaftre fans of 20-30 sec noise suddenly and during idle sound Inc. is not normal/quiet a bit different than usual.

  The fan noise is really annoying and it constantly happens not even a minute, it stops.

  So in my case I think that it may be hardware fan prob because I wasn't this prob when I bought this system may be fan is going to jam in a near future?

  It's my system config:

  Studio 1558:

  : Processor Core i3 M350 2.27 Ghz processor

  RAM: 4 GB

  Gfx card: ATI Mobility Radeon HD 5470

  HARD DRIVE: 500 GB

  Backlit keyboard

  Slot load CD/DVD player

  P.S.: My CD/DVD drive and HARD drive recently prob SO dell replaced both.

  Thank you

  Manan

  Today engineer came to my house and the replacced he fan + heatsink. Thermal paste is already on it I guess, it has not applied separately.

  Fan runs smoothly.

  Failure: in fact the outer part of the radiator is responsible for this when the engineer came out the part and he hit an outside party who is also visible (Manager) of air is broken.

  It was broken when an engineer trying to clean the fan lol.

  I've also attached the image of the broken part. Image is not good but always visible

  .

  Another view:

  

• (Redirected) DELL Inspiron 15R - touch screen problems - Windows 8

  Hello

  I use a Dell Inspiron 15R series. She has Windows 8. I did no changes to it. All of a sudden the touch screen is not responding. I saw solutions like uninstall the driver of the touch screen and other things in this forum. But I can't seem to find the touch screen driver in Human Interface drivers in Device Manager.

  Can someone help me with this problem please?

  I had problems with touchscreen becomes inadmissible for a few seconds, but today it has completely stopped responding.

  Hi jncxavier,

  Please repost this in the laptop computer forum for faster assistance.

  http://en.community.Dell.com/support-forums/laptop/

• Pro from Dell place 8 touch screen problem

  Hello Dell Tech and users!

  I have a coming 8 Pro and I love it.  However, recently, I noticed a problem with the touch screen.  When my screen is in portrait mode with the windows key upward, I can't slide in from the right.  Similarly, if I flip the cost-to the right mode screen landscape with the button of windows on the left, I can't slide down from the top.  I took it to my local Microsoft store where I bought it, and they said to contact Dell, as it is under warranty (bought in dec 2013) and it seems that the digitizer is laminated.  How to solve this problem?

  Thanks in advance,

  Jim Smith

  Milwaukee, WI

  Looks like you will have to re - calibrate your screen (this same situation happened to me).  Do a search on the tablet to "calibrate".  For me, it worked for re - adjust calibration to the original values - do the recalibration process had not helped.

• a yellow triangle with a critical problem message, windows vista does not load on a computer laptop dell studio

  Vista Windows failed to load on a dell studio laptop, the message appears with the critical error message, but then the screen turns white after auto restart, no loading of windows. What can I do

  http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/DIAGS.htm

  Try the above balance sheet of Dell Diagnostics, using F12 to start this process.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can also follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• I have a Dell Studio 1737 problems load and eject CD CD player loading side

  I have a Dell Studio 1737 with a CD to load by side of the eject button is on the top. He stopped to load or eject the CD he did make a sound now things just stuck. Does anyone have an idea of what went wrong past and how to fix it? Thank you

  There should be a small pin hole in the front of the cd player. You can insert a paperclip unfolded in the hole and press. The Board should then opens. If it does not open and close automatically after that, then you have a mechanical problem with the drive and should be replaced.

• Speed wireless on a Dell Studio problems

  I have a question about my new Dell Studio, the Intel Centrino Advanced-N 6200 wireless card.  I can connect to my router Linksys Broadband-B, but the speed is on all fours (2 members).  I remember having this problem before on another pc, but can not remember what the hell I did to remedy.

  I tried to change the channel on the router, but that did not work.  Any help would be greatly appreciated.

  Thank you!

  Hello Paul C

  My name is Ajay and I work for the team at Dell Community and social media.

  The problem you are having with the WiFi card can possibly be fixed by disabling the N mode on the WiFi card.

  Please see the link which will give you an idea on how to do it.

  http://www.Intel.com/support/wireless/WLAN/sb/CS-025393.htm

  Hope this helps

  Concerning

  Dell-Ajay S

• Sound on Dell Studio 1635 Vista problem

  OK, I have a dell studio 1535 had for 2 years. No problem. until a few weeks ago about the sound just mess up. If I go back sometimes it works, other times it just does not work. Ive downloaded this patch that dell said would fix but no, theres a bios that someone says work but they did not give me a link, so I have no idea. and ive tried microsofts easyfix program. If anyone has had this problem and has a solution please help. im not very tech savvy so details please. IM so sick of this computer.

  Thank you for your help.

  * original title - problems of sound with my studio stupid dell and ive tried everything help? *

  http://support.Dell.com/support/downloads/DriversList.aspx?c=US&l=en&s=GEN&ServiceTag=&SystemID=STUDIO1535&OS=WLH&OSL=en&CATID=&impid=

  Drivers Audio Dell 1535 downloads at the link above.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Reference Dell coordinated at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 8 touch screen works is not on my Dell Inspiron One 19

  Windows 8 Touch screen not working not not on my Dell Inspiron One 19. Need the driver.

  SNAP WITH ON RESET YOUR ON-BOARD COMPUTER

  DELL WEB SITE

  Click on the SUPPORT tab at the top of the page.

  Click on "DETECT MY PRODUCT."

  Follow the prompts and run the program

  Do not change the file locations or whatever it is simply continue through the process of "DETECT MY PRODUCT". You should then be brought to a web page that lists: TOPICS & ARTICLES-DRIVERS and DOWNLOADS - MAINTENANCE - PARTS & ACCESSORIES GENERAL DIAGNOSTICS-SUPPORT

  Click on "DRIVERS & DOWNLOADS"

  Drop-down menus should appear with the system operations, category, Importance and release as your options.

  Just focus on the fall of the "CATEGORY" to the bass and select "MOUSE, KEYBOARD & INPUT DEVICES", then scroll down to the BOTTOM.

  There should be a BLUE ARROW with 'MOUSE, KEYBOARD & INPUT DEVICES (1 FILE)' written in blue font. Expand this section

  Click on the link 'DOWNLOAD '.

  Follow the prompts.

  Restart your computer.

  YOU SHOULD BE SET TO GO! HOPE THIS HELPS!