Someone connect to my icloud

Similar Questions

• My ex is connected to my iCloud email secretly and do not think I know so now I can't link my email with my iPhone journal inside iCloud to check my mail or anything, how can I solve this

  My ex is connected to my iCloud email secretly and do not think I know so now I can't link my email with my iPhone journal inside iCloud to check my mail or anything how do I fix this someone please help lol

  Caitlyn,

  In the interest of privacy, I would recommend that you create a new password for your iCloud account.

  https://appleid.Apple.com/

  

• Cannot connect to the iCloud on my MacBook Pro

  I can not connect to iCloud on my MacBk Pro. It of been like that for more than a week. Even if I can connect my iPhone and iPad, and also on my account, no problem. Tried to reset p/w, of course! I contacted Apple Support, but they couldn't help me. MacBook said "he had a connection problem in iCloud. I hope someone out there has an idea on what went wrong?

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - subject

  Safe mode - Yosemite

• I've updated my iphone5 to IOS10 and now my old photos are blurred. He said: "no account icloud don't set up-missing userRecordID. IM connected to my Icloud but...

  I've updated my iphone5 to IOS10 and now my old photos are blurred. He said: "no account icloud don't set up-missing userRecordID. IM connected to my Icloud but...

  Hello Dulceallison,

  Please ask questions on iCloud and photos after the iOS 10 update here in Apple Support communities. We don't like hearing about questions after each update or upgrade. I am pleased to offer you some things to check to help you with your photos are blurred and alerts that you have received with iCloud.

  The first thing we want to make sure is that all your data is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, we need to verify your configuration and ensure iCloud library is enabled and check if you are using the storage optimization feature. Please open this help link: iCloud photo library. There is a section on titled mid-race "save space on the device. He talks about the storage settings optimize. When this option is enabled, you will get in their original, high-resolution images of resolution lower, while iCloud library keeps all your photos and videos. You can check and see what images are stored in iCloud by clicking on this link: icloud.com, sign in using the same Apple ID that is connected on your iPhone. Click on the Photos. If you use iCloud photo library, you will be able to see all your photos. Upstairs in the Center, it allows you to see Moments or Albums, and if you scroll all the way down it will tell you how many photos and videos that you have. Also, some scroll down and try to check a few who appear fuzzy on your iPhone. Icloud.com are also blurred it?

  If you use iCloud photo library, and even if you see lower resolution versions of the photos on your iPhone, they should not be blurred. Make sure that you have made a backup and then please go to settings > iCloud on your iPhone. Turn off the photo library iCloud, wait a minute or two and then turn it back on. It should be re - synchronize your iPhone with iCloud. Check if the images are still unclear. If they are, please fully sign off iCloud on your iPhone. There are options to save contacts on the iPhone, and other documents and other will be deleted form the unit. Don't worry, this information is recorded with iCloud and also saved in the backup. Once all signed, restart your iPhone. This article will help you if you need the steps to restart the appliance: restart your iPad, iPhone or iPod touch. Once the device powers turn it back on, go ahead and return to the settings > iCloud. Sign in with the same Apple ID that was signed previously. It may take a few minutes to return all documents, data, photos, contacts, and calendars, but once this is done, go ahead and check your photos. They match the icloud.com images? Are they accuse still blurry on your iPhone only? See if you can isolate a specific set of images, or if all the photos on the iPhone are blurred.

  I hope that steps with deactivation and activation of photos in iCloud or logout and back in iCloud has resolved the issue, but if not, please provide the information for the steps that we have achieved together so far and I'll be more than happy to continue checking of other options to get this working as expected with you. Thanks again and have a great rest of your day.

• I connect to my icloud account to activate facetime and it says I need to verify my email address

  I connect to my icloud account to activate facetime and he says I need to verify my email address, how do I?

  You can also use your email address with iMessage and FaceTime. If you have any questions, check your e-mail address, learn what to do:

  • Your e-mail address is already used.
  • You did not receive the verification email.

  FaceTime is not available in all countries or regions.

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• Someone logged into my icloud account also I changed my password else to do I do?

  Someone logged into my icloud account also I changed my password else to do I do? What other steps should I take? Should cancel my credit card?

  You probably don't need to cancel the cards, but you should keep a very close eye on them for unauthorized purchases that must be reported immediately to the issuing company. However if you have reason to believe that the person really knows the details of your card then you should discuss the cancellation of the card with their transmitters.

  Change the password to a strong should keep the offender out, but you should consider the creation of a two-step verification. With this, anyone (including you) your account needs both the password and a code sent by SMS to your mobile phone. This puts an end dead to anyone else is even if they guess the password.

  Please visit this page for more information: frequently asked questions about check in two steps for Apple ID - Apple Support

  If you are going ahead with this, please note that you will receive a 'recovery code' that can be used if you lose the phone or forget the password. You need to keep it safe. Signing in requires two on the password, the phone or code recovery and if you lose both of them you will be permanently locked out and Apple cannot help you.

• Can I create an event to show when someone connects to a required program file, such as our timing?

  Can I create an event to show when someone connects to a required program file, such as our timing?

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest you re-post your query on The MSDN Forums , because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Can someone connect to your moden w/o a router on your end?

  IM is connected directly to a modem, RoadRunner. But recently my speed slowed WAY down.

  Hello

  No - someone is unable to connect to your modem so this isn't the problem that you are experiencing.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Can someone tell me how to view a different main menu when someone connects?

  When a client is connected, they can view secure pages. I also want a different menu from appearing when you are connected, and you must be offline I want the menu to return to normal. Can someone help please? Let me know if you need information about me. Thank you in advance!

  I recommend referring to the post on the forum on how to achieve this: Re: Secure area - show, hide, or disable content when a user is recognized as registered.

  To sum up, you need to use the {module_isloggedin} module that will make a 0 or 1 depending on whether the client is connected or not. With a combination of CSS/JS, you can specify another menu to display based on whether they are connected or not.

• I can not connect on my icloud account because it is locked. I can't unlock it because I can't get mail

  My icloud is * and I have no idea how to fix this! I checked all my emails and that you haven't seen a check in any of them.

  

  I also tried to fix it via laptop and I saw this. I am very confused.

  < email published by host >

  It's a very bad idea to post your e-mail address - it's an invitation to spam - and I asked the host to remove it.

  Go to https://getsupport.apple.com . Click on "see all products and services", then "More", then "ICloud", then "account and Setup", then "troubleshooting questions iCloud account." Then click on "no thanks." Continue "to be offered the means of contact.

• How can I delete someone connected to my computer and using their microsoft acct and became an administrator using their account. I can't access my microsoft account now.

  My son connected to my computer and access his account of Microsoft in doing this, he became my Microsoft account manager.  I can't access my account now, how can I remove it from my computer and come back to me as my Microsoft account manager?

  You will need your son to get a one-time password, then go to settings / accounts, then choose "connect without a Microsoft account" to break the link from his Ms Account.

• Need to reset Win - XP, whenever someone connects

  I just reinstalled Win - XP Pro (from scratch) on the PC of a friend after I installed a new motherboard.  SP3 has been installed and all THE members updates from the web.  Since doing these updates, whenever a user opens a session system needs to be reset to use another (or even the same user) to connect again.  If you try to connect without resetting, wallpaper (picture) comes up without the etc on the desktop shortcut icons and no bar of tasks or 'Start' etc.  If you do Cntr + Alt + Delete, you get the Windows Task Manager and can do a few things from there (including rebooting).  Try to run Explorer.exe results in no results whatsoever.

  Hi ghendo,

  Thank you for using the Microsoft Forum!

  Run an online scan to check if the problem is caused by viruses
  http://OneCare.live.com/site/en-us/default.htm

  Try to do a system restore to go back to a point before SP3 was installed, if possible, by following this link: http://support.microsoft.com/default.aspx/kb/306084

  If you are able to do a restore of the system (before the SP3 Installation), then,.

  1. download service pack 3 from microsoft official site
  2. restart the computer and start the computer in safe mode.
  3. install the SP 3 from there.

  In Windows XP Safe Mode steps:

  To enter the Windows 2000 / XP Safe mode , as the computer is starting press on and hold your "F8 key" which should show "Windows Advanced Options Menu" as shown below. Use the arrows on your keyboard to move to "Safe Mode" and press your enter key.

  Note: With some computers, if you hold down a key as the computer boot you will get a stuck key message. In this case, instead of pressing and holding the "F8" key, press the "F8" key continuously until you get the boot menu.

  Hard to get into Windows 2000 or Windows XP Safe mode - if after several attempts you are unable to get into Windows 2000 or Windows XP Mode safe, that the computer starts in windows, turn off your computer. When the computer is turned on the next time window should be noticed that the computer does not correctly start and give you the Safe Mode screen.

  After Safe Mode your next troubleshooting step would be to boot

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  Follow the steps below to put your computer in a clean boot state:

  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  Log the computer by using an account with administrator rights.

  2. click on the Start button, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.

  Note following this step lets Microsoft services continue to operate. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  5. click OK and then click on restart.

  Check the link to learn more about the clean boot below:

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click the Start button, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  Hope this helps

  Thanks and greetings
  Aziz Nadeem - Microsoft Support

• I don't want to connect my users to the cloud to Adobe.  How to install unless someone connect?

  I want to just my users to have the ability to use the product.  I don't want to use my account to configure each Acrobat Pro user.  How to install Acrobat Pro 11 without having to connect to the Adobes cloud?

  Hey 356075,

  You can install Acrobat Pro XI of the mentioned the direct download link below:

  Other downloads

  If you have a license for single user retail, you can install the software on maximum two computers using the same serial key.

  Hope that helps.

  Kind regards

  Ana Maria

• The Web site is slow to load when someone connects first

  Hi all. I have a strange problem. I recently installed ColdFusion 11 on a test server cool running Windows Server 2008 and IIS7. Since it is a test server, there is no really all traffic goes to him, so he is probably not pages but when I connect to it.

  Now if I try to access a page after doing nothing for a while the browser is abandoned for about 15-20 seconds before loading the page. After that although each loading of the page as fast as I expect. If I stop to browse the site and wait for a while (not exactly how many time, 10 + minutes?) it does the same thing.

  This only happens on sites that I've implemented as ColdFusion sites. I have a test site that is not configured via the tool of Coldfusion and has only html content and it loads fine.

  I followed the ColdFusion connector tuning found here: ColdFusion 11 IIS connector Tuning - Adobe ColdFusion Blog and it has not changed the problem.

  All works in this or know how I can fix this?

  Thank you!

  Make sure that you have installed the hotfixes for Coldfusion 11 (updates 1 & 2). They are available through the Coldfusion Administrator.

  The issue you described has been corrected in update 1 I think (ColdFusion 11 update 1). Make sure you reconfigure sites using the tool connection website when you have finished the updates.

• iPhone showed a map of a device trying to connect to iCloud. I said "do not allow". How did even get on my iCloud account right now?

  A notification on my iPhone showed a map of a device trying to connect to my iCloud in Tampa, Florida (never been there). I said "do not allow". Less than 30 minutes, I see all my devices lost Emails and an email from a new device that is connected using a computer Windows in Tampa, Florida. How someone access if I do not?

  Another weird thing, I was recently preparing a vacation to Tampa, FL given but never aired my iCloud email address but I use my credit card at resort and used a different email address (i.e. not associated with). My iCloud password is associated with another email address, nor any association with the credit card.

  Hi there, Aldin7!

  You did the right thing by clicking "do not allow" for the connection. I'm glad that you reached out, I will do my best to help.

  The first thing I would recommend is to change the password of your ID: ID Apple

  This article goes over how to change your Apple ID password, for reference.

  Then I got Contact Apple for assistance with the security of the Apple ID accounts to make sure that everything is safe.

  Thank you for using communities of Apple Support and have a great day!