Similar Questions

• HP Pavilion HPE h9-1100: Installation of the graphics card... Screen is not displayed. NEED SERIOUS HELP!

  Hi, so I recently got a new "XFX Radeon R9 285" graphic card PCI - E 3.0 and installed in my PC, I went to start it and the screen does not light. The PC boots, the fans run and everything just no display. It works with two other Radeon PCI-E graphics cards, but it does not start. 285 graphics card works in another computer, but will not work on this one. I tried to uninstall the old graphics card drivers and no luck.

  Motherboard: Gigabyte M3970AM-HP (Angelica)

  Model: 2AC8

  Supplier of chipset: AMD

  Chipset model: RD9x0

  CPU: AMD FX-8150

  PSU: 600w

  RAM: 10 GB

  ORIGINAL OF THE GRAPHICS CARD: RADEON HD 7600 SERIES

  OTHER MUCH OLDER BUT WORKS

  Thank you for the additional information.

  Since you had the card running in another computer, you must have connected the two power connectors 6 pins.

  If it were me, I would XFX Service contact customer (800-880-3225) to see what they have to say about your problem.  It may be a BIOS problem.  They need the specifications of your computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• The menu items are reversed in Tablet and mobile display

  I don't know what went wrong with the Web site, www.cebumerchants.com, the menu items are reversed in the mobile and view tablet, but not for the office.

  Can someone please take a look? I need to solve this problem.

  This one is pretty simple. You use float: right on your query support desktop and float: left for the little ones to your selector "nav li '...

• How can I get the menu bar with preview in browser and Code, split Code, design to appear? (DW CC) Accidentally deleted and cannot locate.

  I have accidentally disabled Standard or Document to the menu bar, now I can't locate the Code, code split, preview in browser and others.

  How can I get the menu bar with preview in browser and Code, split Code, design to appear? (DW CC)

  Found.  View > toolbars > Document.

• Problem in BBM blackBerry Smartphones - I do not have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel

  I don't have a display picture bbm Board and the State. I cannot access it and cannot access my photo or status of the contacts Panel. Help, please!

  Thank you!

  Then you can try upgrading the BBM to the latest version available for your device?

  Make that first make a local backup of your BBM contacts, after backup, delete or uninstall any existing version of your BlackBerry. On your home screen, go to Options > Advance Options > application > BlackBerry Messenger > delete BlackBerry Messenger of this list (highlight BBM press on the menu key and select delete)

  KB10040 : How to view or delete the application installed on a blackberry smartphone 

  Once it is perform a battery pull reboot by removing the battery while your unit is powered, wait a min, then reinsert back.

  Finally, after the reboot, use your BlackBerry browser and go to www.blackberry.com/bbmdownload and download the latest available for your device.

  _______________________________________________

  Please note :

  If you encounter BBM7 or higher then your BBM Contacts are integrated into your BlackBerry ID after installation when you log in with your BlackBerry ID Contacts is restored back, but if you experience any previous Kathy then first make a backup local, you can save on your press card, see this KB for additional assistance

  KB20554 : How to back up and restore the BlackBerry Messenger contacts list

• The SIM card inserted in this iPhone does not appear to be supported.

  The SIM card inserted in this iPhone does not appear to be supported.

  The SIM card that you have currently installed in this iPhone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert a different SIM card of a carrier supported or to ask that this iPhone be unlocked by your operator. For more information, contact Apple.

  < re-titled by host >

  Not sure what your question is. The error message is clear: the device is locked to another carrier. It must be unlocked before you can use the SIM card, you try to use. Contact the carrier to get it resolved. Only they can help you with this.

  See you soon,.

  GB

• I bought Photoshop elements &amp; elements of Prime Minister to Best Buy 2 years.  Finally opened and I tried to get the serial number online by using the identity card, but said website code is not valid.  They called Best Buy, said that adobe should hav

  I bought Photoshop elements & elements of Prime Minister to Best Buy 2 years.  Finally opened and I tried to get the serial number online by using the identity card, but said website code is not valid.  Called Best Buy, they said that adobe should have canceled activation because it has not been installed in a timely.  How can I get a serial number for installation?

  jotison64 wrote:

  I bought Photoshop elements & first items at Best Buy 2 years.  Finally opened and I tried to get the serial number online by using the identity card, but said website code is not valid.  Called Best Buy, they said that adobe should have canceled activation because it has not been installed in a timely.  How can I get a serial number for installation?

  Work your way through this document in the end, step by step, and finally try to start a chat session. I hope that Adobe will straighten this out for you.

  Contact the customer service

• I am trying to build a DVD menu, but whenever I click on the button "Toggle the display of the menu" options I get no picture and I am unable to create a menu. Can someone help me with this?

  I am trying to build a DVD menu, but whenever I click on the button "Toggle the display of the menu" options I get no picture and I am unable to create a menu. Can someone help me with this?

  You need to install the library separately:

  http://helpx.Adobe.com/Encore/using/download-library-content.html

• why I use the new cc photoshop cannot open, have and pdf

  why I use the new cc photoshop cannot open have and pdf.

  and more slow then former execution

  According to your records, you bought the CC for photography program under the same ID from Adobe Photoshop.

  It gives you access to use Photoshop & light room.

  Concerning

  Stéphane

• I have the trial version but my cloud libraries are not displayed. Is this a limitation of the trial version?

  I have the trial version but my cloud libraries are not displayed. Is this a limitation of the trial version?

  Hi Amy,

  Can you please let me know about the AI CC version on your machines?

  WIN: Menu I help > about Illustrator

  MAC: Menu of AI Illustrator > about Illustrator

  The library Panel is shipped in The AI CC 20141 release. If the AI CC version isn't AI CC 20141, that please update HAVE CC 2014 using the creative application of cloud (quit and relaunch the CC app).

  Thank you best regards &,.

  Rambour

• Where are the options of the trackpad in Sierra OS?  In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  Where are the options of the trackpad in Sierra OS? In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  System Preferences > Trackpad!

• I have problems in installing the creative cloud, because mark "error 206" and not let me download.

  I have problems in installing the creative cloud, because mark "error 206" and not let me download. What could be the cause of this problem? and that he could fix?

  Error 201 & 205 & 206 & 207 or several U43 errors

  -https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html

• Why the menu bar menus cannot be moved to another toolbar?

  Hello

  In previous versions of Firefox, I used to move all the items of the menu bar navigation bar.

  But now that the tabs can be at the top of the window, which saves a useless space (the guys great work there), I hide the menu bar to use (and use the Firefox button).

  Since I can't find all the options that I used to find in the menus in the Firefox button (it has less detail and I have an additional module - ScrapBook - added a menu for traditional menus), I tried to move the navigation bar menus, so I can use them both at the same time. It seems that I can't move the menus anywhere in the menu bar. Why? I see no reason for the menus don't not have to be mobile as the other elements.

  This would give an opportunity to use old (and huge) menus and the new button at the same time.

  Thank you.

  teagish:

  Tagish said: I do not see an image in your last post, so I guess that you have changed from that of the ' 29/11/13 12:47 ' post.
  
  Answer: This is the image that I was referencing.
  

  Here's a broad overview of the Australis in its current form (there is little information that we are almost half a year of release and the release date can always be pushed if necessary) - https://blog.mozilla.org/ux/2013/11/australis-is-landing-in-firefox-nightly
  
  To download Australis - https://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/latest-ux/

  • Set up a separate profile for each version of Firefox including Australis to avoid damage to your profile-

  Don't forget that Australis is in pre-alpha, is not intended for the average user, for purposes of testing only at this point, is not completely stable and safe for daily use and is subject to change on a daily basis.

  Remember that anything, including the answers that I gave you earlier in this post and this post below this post (so that should happen) is subject to change, because the developers your feedback and if they decide to make a change.

  I suggest that you expect the Australis interface is closer to release to specific questions; Maybe wait for it either in the Aurora channel in a few weeks, then download and install it and use the Firefox Help menu > submit your comments to send feedback to the developers. Will NOT respond to your comments, but they can read them.

  1. The activity indicator is no longer available. Maybe an add-on will be developed later.
  2. Moving of House provided, download and bookmark combined this bookmarks / page display is possible and that they can be moved to the left of the URL/address bar. It seems that the button bar-3 (with customizable content by the user) is NOT mobile and can NOT be hidden. Note that the bookmark bookmarks button / display the page is currently "twinned" and cannot be moved as a unit.
  3. URL/address bar and the search bar may NOT currently be removed or hidden. In fact, the Navigation toolbar is more may be hidden. It is my understanding that the URL/address bar is now a single unit which includes the Go/Stop/Reload button and Back/Forward button and components Go/Stop/Reload button and Back/Forward button cannot be separated from the URL/address bar. There has been a lot of questions on the forum where users have hidden or deleted these articles and it causes huge problems for them.
  4. Read carefully, as I've included in one of my previous posts. Currently the default installation of Australis places the Menu bar at the left end of the title bar of the windows with the minimize mazimize, close of the buttons on the right side of the title bar. The menu bar is NOT currently but mobile can be turned off and temporarily displayed by pressing ALT or F10 in Windows. The Menu bar can be replaced using the add-on classic theme restaurant (click on the link where it is mentioned in a previous post above) to display the Firefox button. It is supposed to display the Firefox button in the title bar, but he shows currently below the title bar, taking a vertical line of the space. Currently the bar menu, when poster takes a bit more pixels vertically it needs; I hope that will be fixed.
  5. Currently, the default installation shows the menu bar (where the left side of the Windows title bar was previously), tabs, and the Navigation toolbar.

  Some add-ons will probably grow to allow users to modify some, but not all, changes to the interface. Restorer of classic theme has already been mentioned above, and I used it to change the look of my working version of installed 28.0a1 Australis.

  Let's please wait and see what develops rather guessing what might happen, or make decisions based on the current pre-alpha of Australis.

• I'm trying to connect to the internet and I am unable to do so. My screen says Internet Explore cannot display this Web page. I missed something in the settings? He sees my wireless and says acquiring network address... but not to go further.

  I tried to diagnose, disconnect and reconnect

  You have left out information such as how you connect to the Internet (cable/DSL? ISP?), the brand of your router, and whether other computers can connect to your router wirelessly with success. Also, we don't know whether there is an initial Setup or if you had this before work and now it just doesn't.

  I'm going to assume that this is the first installation then give you instructions on setting up a safe wireless router. Maybe that will make things work for you. If you need more information, be sure to include all missing information in your next post.

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your modem.
  2. attach a class (usually supplied with the router) ethernet cable cat5e Internet/WAN port of the router to the ethernet port on the modem.
  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.
  4. turn on the modem. After that all the lights are on, turn on the router.

  To configure the router:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing. MS - MVP - Elephant Boy computers - don't panic!

• Start menu music link to my music and not the music library?

  Can I do the start menu links to music, documents and videos show my user folders for these items, rather than the folders in the library?
   
  Here is a picture to better understand: http://i.imgur.com/71Ro6.jpg

  I want to link the music to actually view the items in my music folder and not the folder 'my music '.

  He cannot do.  It can show the folder that then flies on to display the content when you hover over the name of the folder [XP-style].

  Just to make sure that we are not misunderstanding each other - set the start menu entry to be "Show in form of a menu" rather that "display as a link" on start, do a right click, properties, customize.