SonicWALL for cause of Migration of ASA

Similar Questions

• VPN Concentrator at the migration of ASA - auth problem.

  Hi all

  I'm migrating to remote access VPN (IPSec) VPN 3020 to ASA. Local authentication works very well. If I add the IAS radius for authentication servers, then I get the following error message

  Secure VPN connection terminated by a peer.

  433 reason: (reason unspecified peer)

  The capture of shows "access-reject" in back IAS server packages. IAS server is configured in the same way as the VPN 3020.

  I run the code to 8.0 (0) on the SAA. Any idea of what is the cause?

  Hello

  You specify the shared secret between asa and IAS?

  You specified in RADIUS server that ASA is allowed to send requests? In other words has specified that the SAA is a valid SIN?

  This link may be useful: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806de37e.shtml

  I hope this helps.

  Best regards.

  Massimiliano.

• MySQL for Oracle Database Migration

  I'm migrating 75 Tables of MySQL (5.0.18) to Oracle (10.2.0.1.0) using SQL-Developer (2.1.1.64)
  
  Below are the steps to follow to a State where I'm stuck:
  
  1: opens a connection with MySQL (5.0.18) which has * 86 * databases.
  2: open another connection with Oracle (10.2.0.1.0); a new installation.
  3: just clicked one of the MySQL database and selected ' + * Capture schema * + ".
  After the capture, this particular database appeared on ' + * models Captured * + ".
  4: right-click on this model converted, that says "* [email protected]:3306 (MySQL), etc. * ' and selected ' + convert model Oracle +".
  5: nothing appeared on the "* Converted models."
  
  ~~~~~~~~~~~ Stuck ~~~~~~~~~~~
  
  Another thing:
  -If I select different tables of the database under "* models Captured *" and then convert them then ' * SQL Developer * "generate converted models.
  -If I repeat anyone else of tables "* Converted model *" are generated.
  
  Am I suppose to repeat this step for each Table, the trigger, view etc.?
  
  Thank you
  
  
  Edited by: user13397582 on August 26, 2010 06:08_
  
  Also the * 'Script' * output even * "name of the constraint *; Viz
  
  + Cdr5 ALTER TABLE ADD CONSTRAINT PRIMARY PRIMARY KEY (table_id) ENABLE; +
  
  Constraint must have derived the name of the table. Otherwise, you will have repeated migrations:
  
  Error report:*.
  SQL error: ORA-02264: name already used by an existing constraint
  + 02264. 00000 - 'name already used by an existing constraint ' +.
  * Cause: The specified constraint name must be unique. +
  * Action: Specify a name for the constraint unique constraint. +
  
  Published by: user13397582 on August 26, 2010 06:08

  Which JDK version do you use?

  There is a problem with SQL Developer 2.1.1 with JDK1.6 less than 18 years of age and older, during the conversion of a migration phase, with exactly the symptoms you describe.

  If you use one of these JDK could you try to install JDK1.6 U17?

  Concerning
  Wolfgang

• My computer is a candidate for clean installation, migrate or unble to run windows 7

  How do you determine if my computer is a candidate for a clean install, migrate or unable to run windows 7

  By running the Windows 7 Upgrade Advisor?

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

• HA Dell two, Sonicwall for two ISP links configuration

  Dear experts,

  I have two Dell SonicWall NSA3600 with two ISP links.

  Currently one that nsa3600 with two links ISP uses with configured load-balancing feature.

  Now I want to configure hardware failover using NSA3600 secondary.

  I know how to configure hardware failover with NSA3600 unique using two Internet service providers.

  But I have no idea about 'How to configure hardware failover for two NSA3600 with two Internet service providers.

  You have an idea on that?

  Thank you.

  Warm greetings,

  Zaw

  Hi Zaw,

  According to my understanding of the question you posted "How to configure hardware failover for two NSA3600 with two Internet service providers. »

  If so there is no special configuration is required. It will be like the regular HA installation. the 2nd Internet service provider, you need a switch connecting the two NSA 3600.

• Automatic configuration for routers, switches Catalyst and ASA backups

  I am looking for a free solution to make monthly backups of my routers (2821), Catalyst (X 3650, 3750-X) switches and ASA (5510). I'm in a Windows environment and have you not mind doing a bit of coding.

  I did some research looking at other popular solutions:

  -SNMP and a combination of Bash scripts, but that does not support switches Catalyst from what I've read.

  -Rance, on Linux & OS X, not something common in our environment

  -Tools of Tao kiwi, not free

  Is there something (or if applicable, somethings) that I am missing that will do this from a Windows environment for free?

  Thanks in advance.

  Kron seems to be supported on the routers only, ASA here is a good explanation on how to collect the backups regularly:

  https://supportforums.Cisco.com/docs/doc-14958

  If you are looking for a centralized solution and you machine to act as a collector, rancid is really the best option (if you can allow non-windows machines).

  Kind regards
  Ivan

• New for mapping SSL VPN ACS ASA - ASA groups

  Greetings,

  I am new to ASA, so any help is greatly appreciated.

  I just installed and installed an ASA 5520. I installed an SSL VPN. What I'm trying to achieve is to configure profiles of different groups and different users can access various resources when they access the VPN.

  Current config-

  ASA 5520 v8.3

  ACS 4.0

  Field of Windwos 2003

  I have different installation profiles in the ASA. (i.e. business Dept.) When I choose in the drop down menu, it allows me to open a session and displays the options I've chosen for this group. The problem is that I can connect in this group with any account. GBA, all windows domain users are in the default group. I guess the default group is being processed and which has hosted and user logon.

  Can anyone provide a good article or tips on how to configure the ASA and the ACS for several groups of users. We have several departments that will have to get the parameters when they connect. The ACS groups are mapped to the Windows groups that correspond to each Department

  Any help is greatly appreciated.

  Thank you

  Tim

  Hello

  I think that you need to activate locking group.

  In order to configure Group locking, send group policy name in the attribute class 25 on the Authentication Dial - In User Service (RADIUS Remote) server and choose the group to lock the user in policy.  For example, to lock the user 123 of Cisco in the RemoteGroup group, define the class of attributes 25 Internet Engineering Task Force (IETF) UO = RemotePolicy; for this user on the RADIUS server.

• GANYMEDE + for the unified management of ASA and VPN auth

  Hello, I have ASA 5540 and 4.2 ACS (AD backend), I want authentic unified management and vpn access.

  For example, I have two groups in ACS (mapping AD): Admins, VPN access.

  I wish that Admins have full access (shell, VPN) and "Access VPN" only vpn, without shell of any kind.

  I understand how to do with RADIUS - use 'Service-type' and network access profile, but how to do it with GANYMEDE +?

  There is something

  I explained to him almost the same scenario in the post of 2008

  https://Cisco-support.hosted.Jivesoftware.com/message/853751#853751

  To achieve this, you should have even ASA added to GANYMEDE and RADIUS AAA cleint.

  

  Since you want to group admin must have FULL access so don't change anything on this group.

  Now vpnaccess Group on ACS must have only access to the VPN, then here you need to implement IP-based NAR

  Go into the setup of the Group > ip based NAR

  

  I hope this helps.

  Rgds, jousset

  Note the useful posts ~

• Transfer of licenses of Proxy for the UC phone to ASA newest

  A few questions about the issuance of licenses for the ASA and the licenses UC phone Proxy.

  1 if I buy a block of 24 licenses UC phone Proxy for the ASA 5510, I am able to add more than 24 blocks needed?

  2 can if/when tire upward to the ASA and ASA 5510 5520 or 5540, I transfer phone licenses Proxy to the ASA again?

  Thanks in advance.

  1. Yes, you can buy licensed user CPU upgrade for ASA 5510, with up to 100 users for ASA5510 UC. You can not buy however a user 24 existing UC to be added to the license of the 24 user license. You must acquire a license from 24 to 50 or 24 to 100-user license upgrade.

  Here is the URL for your reference:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/license/license82.html#wp194956

  (Article 'Lines additional guidelines and Limitations', fourth ball point)

  2. No, the license is linked in the serial of your ASA no existing, and it is not transferable. Here is the URL for your reference:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/license/license82.html#wp194956

  (Section 'Guidelines and additional Limitations', second indent)

  Hope that answers your questions.

• AnyConnect for evaluating the products using ASA

  Hello people of security,.

  I am to evaluate solution Cisco Anyconnect VPN using ASA. I have a few questions must be answered as soon as possible.

  1st-

  We can combine business partners and client connections used on one ASA in a secure way?

  2nd-

  How the Anyconnect of the functions of selection of the nearest gateway (gateway optimized selection) to a user works? -J' have below link which has a very good explanation, but I'm looking for the best answer.

  (https://supportforums.cisco.com/docs/DOC-15326)

  3rd-

  Can you please highlight important features that are not taken care of other SSL providers?

  Thank you best regards &,.

  Deepak has.

  Not contexts, they cannot be used when you need VPN.

  You can set up different groups Tunnel that you assign to your different user groups. If authentication will be based on the right AAA server (if you have different servers for users and partners). It draws to award good group-policies where the rights and restrictions are configured. So, it's like the different profiles of ipsec. For AnyConnect the same tools (tunnel-groups and group-policies) are used with respect to the old VPN Client.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Online support for RAID5-10 migration on H700

  Our client has a T610 with a H700 integrated controller functioning as a host VMware 5.5 server there currently 6 disks in a single Bay RAID5.  The current RAID5 LUN consumes all available space, although the actual allocated storage is much less.

  Let's change the function of the server significantly, adding an app of the important data.  As part of this, I would like to add a couple more readers and convert the table to a pair of paintings RAID10 4 discs.

  I don't want to go into details of the allocated space, the size of the LUN, etc, here - we can manage that.  My question is, if the allocated space corresponds to the size of the target table I can make this migration online?

  Key questions:

  -I can reduce the size of the RAID5 LUN at all or anywhere near actual allocated space?

  -can I convert table RAID5 RAID10 - once again, assuming that allocated space should be?

  -I'd better first add additional disks and converted to a table of RAID10 8 - drive and then divide into two sets of 4 disks?

  -What specific Dell server management software must be installed?   Or is it only possible at the start of the BIOS?

  Of course, I make backups first!

  -Ken

  Regarding the managed material VD (tables/MON) go to:

  You can never "shrink" a picture by reducing the number of discs or the allocated space.

  Controllers do not support migration or nested RAID levels (10/50/50)... for example, you cannot add two drives to 4-drive RAID 10 either.

  If you plan to switch to a RAID 10 (which I support), then you will have to the data being backed up and restore in the new array.

• Best method for different endian migration

  Hello

  We intend to migrate our EBS R12.1 using 11.2.0.4 database of Solaris Sparc-64 for Linux x 86-64.

  What is the best choice out of the following methods:

  1. transportable Tablespace - using DBMS_FILE_TRANSFER

  2. transportable Tablespace - the use of CONVERT RMAN

  There are other methods available for the object apart from the two?

  Thank you.

  See also MOS Doc 1377213.1

• Shopping cart for Muse that migrates customers to a different database

  Hi everyone, I really hope that someone can help me.

  I created a site in the Muse for a customer who has an existing basket.  I chose to use ECWID as their new basket; It seems easy to use; very functional. reasonable price, BUT I can't seem to migrate my clients in ECWID.  Can you please advise me if they were able to migrate customers to ecwid anyone OR is there another basket that works well with Muse that you can recommend, which has the particularity to migrate customers?

  Thanks in advance for the help.

  You can use the customer or import order if this is allowed in your hosting platform or the purchasing system used.

  I suggest you Ecwid to contact directly this question, I tried to get a few items importer db of the customer regarding:

  http://www.ECWID.com/forums/showthread.php?t=21210

  http://help.ECWID.com/customer/portal/articles/1169671-import-export

  Thank you

  Sanjit

• ISCSI vss for vds VMK migration

  ESXi 5.0.0 469512

  vCenter 5.0.0 455964

  I am migrating standard switches in the switches distributed in my lab and would like to know how to migrate the vmk iSCSI vSS to the vDS.  I read through a few articles and a few vmware docs but have not been able to find any useful info.  Very well, I moved my portgroups\vmks management, vm, and vmotion.  When I try to migrate the vmk iSCSI to the vDS portgroup via the Wizard add a host, I get the following message appears saying that the vmk is always linked to the iscsi adapter.

  "This can only be done while the vmkernel network adapter vmk2 is used by the iSCSI adapter.  Remove the VMKernel network adapter
  adapter for iSCSI to carry out this operation. "

  Do I really need during dissociation of the core of the iSCSI adapter?  I do this manually in some way?  If this is the case, what are the General steps for getting the vmk iscsi migrated successfully?

  Another question...  I read that it is not a good idea to have vCenter virtualized and using vDS and actually Vmware does not support.  Even if it's a waste of nics, vCenter should have it's own of the vss?

  Thank you!

  I had the same error/scenario and that's what I did to make it work.

  (1) I put the host in maintenance mode (optional but wasn't sure of the result)

  (2) entered in the vmhba iSCSI storage--> properties--> tab Configuration network adapters and removed the two vmk, I created on the vSS service in order to configure paths multiple iSCSI.  Once you remove the vmk, your host will see iSCSI data warehouses, but you won't just active multipathing (I went from 2 devices - 4 paths of 2 devices - 2-way).

  (3) went home--> inventory--> Networking and had all my dv port pre-created groups. Right clicked on the dvSwitch and click on manage hosts.

  (4) click on the checkbox for a host that I am train (in maintenance mode) and made the migration as documented in the above pdf.

  (5) I re-entered the vmhba iSCSI storage adapters and added the two new vmk (which should have the same number of vmk carried out the vSS service).

  (6) repeat the other hosts one at a time

  Sorry I had to type this out quickly.  Let me know if I was not clear on some time.

• OK - all of a sudden my facebook opens of the zillions of tabs in firefox - not do in Explorer - gag-. I am running windows 7 - do not know what I changed or fact for cause this... he wants to just STOP. Help!

  When I open Facebook on my laptop - I get suddenly tab after tab of facebook to open... no reason - no change that I know... have tried several things without any positive result.
  I am running windows 7.

  This problem may be caused by the expansion of Facebook Toolbar 1.7.3

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode