Sony DCR-SR85 will look grainy in first elements 7

Similar Questions

• MP4 kann nicht town looking werden in first elements

  SOS, Leute. Da Premiere Elements meine .ts-Dateien nicht would habe im dem alle video in .mp4 videos konvertiert vlc player. Jetzt kann ich tr e im aufnehme und Organizer betrachten, aber wenn ich sie in first elemets bearbeiten oder ein Projekt einbinden will will be, sehe ich (ohne Fehlermeldung) nur Grünes Flackern uber die approximately Lange videos. has been chewed ich please?

  Karl Diewald

  I can get you a file you can enter organizing items 12 and also import (with no defects) in the first of 12 items Editor. But, it is

  with workarounds...

  1. your original MPEG2.ts must be fully compatible with the editor first of 12 elements. But I can't hold a MPEG2.ts my organizing items 12.

  Besides, I see a problem integrating the organizing elements 12 of any MPEG2 file while I'm not having this problem with organizing items 9, 10 or 11.

  Solution 1. Simply import the MPEG2.ts in first 12 items editor for your project. No thoughts of organizing elements.

  2. I've found that I can produce a very good quality AVCHD.mp4 of the MPEG2.ts using Movie Maker 2012 in Windows 7, 8 or 8.1 64bits.

  I find that I can take this AVCHD.mp4 in the first elements 12 without any problem. However, I can't take this AVCHD.mp4 in

  First 12 items editor except IF I rename the .mov .mp4 file extension.

  Solution 2. For goals in first 12 editor and organizer elements 12, convert your .ts in .mp4 with Movie Maker 2012, change the name of the file to .mov .mp4 extension and then import the .mov in first 12 elements or elements Organizer 12 or both without problem.

  3. maybe one step may be eliminated by converting the .ts in .mov directly with a program such as MPEG Streamclip.

  http://www.squared5.com/

  Problems of Organizer 12 elements seem to go beyond the excuse of the lack of codecs. Still considering what to do with the organizing elements 12 in

  in general. My old troubleshooting shall delete the settings file and create a new catalog don't work... as well as the flexibility to rename

  extensions of files involved and right-click the thumbnail of the elements Organizer and select thumbnail update.

  Please consult the bulletin and consider the foregoing and then let me know if everything above worked for you.

  Right now I'm looking at your ts VLC for conversion .mp4 to try to determine what happened to you with it.

  Later.

  RTA

  Add on... No matter what I do with your VLC H.264.mp4... the file import in first elements 12 change nuanced green or green video. I feel

  the problem is in the video codec used. Replacing the file extension of .mp4, .mov here does not change the situation.

• First elements 10 video playback is very bad and rough

  When I look at my Prime Minister mts files to 10 items, the video is really bad. But when I watch the same videos with windows media player, that they look very well. Any idea on how I can get my videos to look good in first elements? I have a new high-end computer.

  You must use Premiere Elements to get the support of your camcorder to your computer, Don - not the software that came with your camera and certainly not Windows MovieMaker. You want to keep the video in its "native" format, and Premiere Elements will do.

  Just follow my instructions above and you'll be fine.

  Regarding the video, you have already captured as WMVs, it is possible, you can still use them in Premiere Elements - but you are going to have performance issues you encounter. Then you can actually be wise to carry out this project in Windows MovieMaker, the only product that is perfect for use WMVs as your edition files.

• Using ListView with ArrayDataModel displays only the first element in each QVariantMap within the matrix

  I have this QML who have a ListView with datasource to a full ArrayDataModel from the CPP file for creationcompleted, I loop in the table to add the hour together to appear as a label on the page, what works. However, when I want to view these items in the list, it will display only the first element of the QVariantMap within the table, no error on the log of the device. Also, triggered more does not work, but when I click it, it will have a blue border surrounding it, but the onTriggered does not fire.

  Here is an excerpt of the CPP on the table fill

  This-> eventsModel = new ArrayDataModel();

  QVariantMap event;

  event ['EventName'] = "Event1";

  event ["EventHour"] = "00";

  event ["EventMinute"] = "01";

  event ["EventSecond"] = '02 ";

  QML-> setContextProperty ("eventsModel", it-> eventsModel);

  Here's the QML

  {Of container

  ID: eventListContainer

  {To ListView

  ID: eventList

  dataModel: eventsModel

  Use a ListItemComponent to customize the appearance of the list view

  listItemComponents:]

  {ListItemComponent}

  type: 'point '.

  {StandardListItem}

  Title: 'Event' + ListItemData.EventName;

  Description: "time:" + ListItemData.EventHour + ":" + ListItemData.EventMinute + ":" + ListItemData.EventSecond; "»

  }

  }

  ]

  onTriggered: {}

  var selectedEvent = dataModel.data (row);

  var eventDetailPage = eventDetailDefinition.createObject ();

  eventDetailPage.txtEventName.text = selectedEvent ['EventName'];

  eventDetailPage.pickEventTime.value = picker.dateFromTime(selectedEvent["EventHour"]+":"+selectedEvent["EventMinute"]+":"+selectedEvent["EventSecond"]);

  eventDetailPage.open ();

  }

  }

  Any help would be appreciated.

  Thank you.

  ListView determines ItemType of the element by calling the function itemType of the dataModel. By default, an ArrayDataModel returns an empty string for this call (see https://developer.blackberry.com/cascades/reference/bb__cascades__arraydatamodel.html).

  This leaves you with a few options:

  (1) If you have no header and all the elements are the same, you can make

  ListItemComponent {
       type: ""
       ...
  

  (2) If you have headers or different elements, you can extend ArrayDataModel and implement your own function of itemType

  (3) you can define a function of ItemType on your ListView in QML. Documentation:

  ListView called DataModel::itemType() for each item in order to know the type. QML, this can be overridden by declaring the itemType function (data, row) on the ListView element. ListView then call this function instead of the function DataModel.

  Here's how to create a list in QML which creates a header for all items on the high level and aStandardListItem for each item below the top level:

• Sony Handycam DCR-HC52 will play tapes recorded with dcr-hc38

  Sony Handycam DCR-HC52 will play tapes recorded with dcr-hc38

  Thank you

  Hey trip,.

  Welcome to the community of Sony!

  Yes, the DCRHC52 will make playback tapes recorded with the DCRHC38 Handycam. Both models record in MiniDV format, and all Handycam that records in this type of format or backward compatible units can play their return.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• First 14 elements meinen Digitalcamcorder Sony DCR-TRV730E nicht erkennt. Was kann ich tun?

  First 14 elements meinen camcorder Sony DCR-TRV730E nicht erkennt. Was tun kann man?

  Ich bin froh, dass ich helfen konnte. Bitte markieren Sie this question day.

• Capture Sony DCR in the first 13 items is not possible?

  Premiere Elements can't find the device (SONY DCR - TRV120E PAL), although it is recognized in "Devices and printers" as "AV/C subunit / Sony DV Camcorder" (WIN 7) and the device is also recognized and properly capture under MS Movie Maker.

  Thanks for all the tips!

  Oliver.

  oliguzzi

  First 13 elements no longer has the DV or HDV firewire capture device data. PRE_help said to the document following the instructions from Adobe

  solutions of workaround in this situation. Please see the bulletin and review, and then let us know if any of them worked for you.

  Removed the unsupported file formats and features. Adobe Premiere Elements 13

  The latest version of Premiere Elements to include this feature was first items 12/12.1.

  RTA

• Sony DCR-HC96 with first CS6

  I have Sony DCR-HC96.  It comes not online even if the camera.  This device is not on the list of devices, so I use "Standard".

  Moving to this discussion on the Premiere Pro CS5 and CS6 CS5.5 forum.

• need help to connect my sony DCR-HC23 handycam to pc

  Hello
  IM interesting to connect my sony DCR-HC23 handycam to my pc, so I could save / change my mini dv.
  the cam has 3 exits:
  One - came out to connect to tv.
  second - a USB 2.0 A to Mini-B cable
  third a dv out.

  Since I don't have a dv out and im tring to connect the cam via cable usb but nothing happens.
  I have to fall on this page:
  http://www.Sony.co.in/support/FAQ/141031
  Ive downloaded and now windows (windows 7 64 bit premium) recognize somethnig but in the end, I get *! * to the Device Manager and it says the material used recognized.

  Anyone know what what should I do?

  There is no 64-bit drivers for usb connections. What we can do is upgrade to Windows 7 Professional that can run Virtual Windows XP mode

  http://Windows.Microsoft.com/en-us/wind... ws-xp-mode

  The USBDRVEN installer will work in Virtual Windows XP and
  install the drivers correctly and also a link between the installation of
  Windows 7 with a virtualization USB Driver Connector.

  I don't know if it will work properly with Windows 7 Professional 64 bit, because I have a 32-bit computer (IBM T60P
  ThinkPad running Windows 7 Professional 32-bit)

  Contact Microsoft and ask questions about your particular
  computer first before you upgrade.

• Sony DCR-TRV740 camcorder

  You will need to transfer loads of old family videotapes of Sony DCR-TRV740 for Dell XPS430 running Vista 32 bit.

  Transfer is OK with the older laptop (Dell Inspiron 8500 running XP) using the USB connection.  Can also change (slowly, poor quality) with Windows Moviemaker.

  But Sony says no USB driver available for Vista. Sony suggested Firewire iLink from camera to the PC, but the camera is not recognized in the Device Manager and therefore can not transfer them to PC. Tried to import Sony Movie Studio 9 Platinum ProPack and VS Video Recorder software - recognizes neither the camera.

  My question - is anyone have solution?

  Would upgrading to Windows 7 works? (Professional and ultimate edition both include an XP Mode)... Fees - but who let me use the driver XP Sony? or Firewire?

  Get desperate - have spent days on this skin.

  You have an analog source and a system that recognizes digital.

  If you happen also has a DV camera... the following articles may be the answer.

  Windows Vista - import analog video to your computer by using a DV camera
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-analog-video-to-your-computer-by-using-a-DV-camera

  Windows Vista - Toss on those VHS tapes
  http://Windows.Microsoft.com/en-us/Windows-Vista/toss-out-those-VHS-tapes-save-your-home-videos-to-DVD

  Capture analog video using a digital camcorder
  http://www.videohelp.com/dvanalog

  Using Windows DVD creation (Windows 7 and Windows Vista)
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00844627&LC=en&cc=us&DLC=en&product=3643454
  (scroll down and read the paragraph: import analog video)

  Another solution would be to buy an analog video capture device:

  The following link is an example so you can see what the material looks like...

  Adapter CARD USB - AVCPT USB 2.0 Audio video creator Capture DVD Maker Editor
  http://www.Amazon.com/SABRENT-USB-AVCPT-creator-capture-adapter/DP/B0011N9QNC/ref=sr_1_1?ie=UTF8&QID=1315664780&SR=8-1

  Find a search on Amazon or Google for analog video Capture device
  more examples.

• How can I download for my sony dcr-dvd403 pmb to windows vista 36 bit

  looking for software for downaloda pmb for windows vista for sony dcr dvd403 handycam

  looking for software for downaloda pmb for windows vista for sony dcr dvd403 handycam

  You have Windows Vista 32-bit and a Sony DCR-DVD403 with LCD 2.7 "...

  According to the Windows Vista for Sony DCR-DVD403 Compatibility Center the device itself is compatible without any intervention on your part.  Support for any third party hardware or software is always from the hardware manufacturer or software.  It is their place to ensure that their hardware and software are compatible with the operating systems their customers use (or not to do - put an end to their support for said product and basically stating that produced a legacy package/device).

  Visit Sony support web page and put in your camera model after you have selected the option for downloads, it takes a place where you can select various downloads.  Simply choose 'Windows Vista' in the menu drop-down "Select an Operating System.  Then it expans show several possible downloads to support this device in Windows Vista, including updates of Picture Motion Browser and Picture Package Sony feeding with their products.  Here are a few updates - so you will need to have a version already installed.

  Notes for the Motion Picture Browser declares, "this utility updates PMB versions 1.1 to 5.8.01 and Cyber-shot Viewer version 1.0, PMB version 5.8.02..."- so I think it is reasonable to assume that, as long as you have an installed version (from the CD that came with your camera), you can use this update to bring it up to State fully patched.  Sony offers a link if you need to buy replacement CD for those that you should have received with your product.  Wow - 30 USD - they are proud of their software.  You may have more luck that many others in the research that a download legitimate to PMB is that you do not have your original CD...

• What software is good for the SONY DCR-DVD201 camcorder?

  I have a SONY DCR-DVD201 camcorder, that work very well on my old Windows XP, but I hated the ImageMixer software. For my new Windows should 7 (HP p6280t), I look for new drivers at Microsoft? SONY is a for Windows 7 yet.

  Can I buy another software (except ImageMixer) which would work on Windows 7 and can access/modify my DVDs of camcorder?

  When you plug it in Windows install drivers for it?  If, then you can use Windows Live Movie Maker, otherwise you will have to wait for Sony to release a Win7 driver for it.

• How can I get rid of the e:31.00 error code in my Sony DCR sr68 camcorder

  How can I get rid of the e:31.00 error code in my Sony DCR sr68 camcorder

  Hello, axel028!

  If I'm not mistaken, the E:31:00 error code can occur on hard drive camcorders and indicates there is a format error on the hard disk of the camcorder. A kind of data corruption occurred.

  If possible, try to first back up all the data saved on the disk hard camcorder to a computer. It will try to reformat the hard drive in the camcorder.

  Try resetting the camcorder. How to reset the camcorder is in this link below:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/39511

  If you have tried to reformat the hard drive in the camcorder or you have reset the camera (or both), and the problem is not resolved, then the service may be required.

  Sorry for the inconvenience!

  Best regards

• Rechargeable battery NP-FH40 model for model Handycam Sony DCR-SR42E

  Because I'm not able to find rechargeable battery NP-FH40 model for the Handycam Sony DCR-SR42E model in one of your stores in Delhi, what is the replacement battery model. Help, please.

  Hello. The H-series batteries have been replaced by the series V so look for a NP-FVxx. The voltage may be slightly different from the original battery, but this isn't a problem. The physical difference only is the size of the center of each side of the battery tab then you might want to try before buying just to make sure it fits. I replaced my series H with V series without any problem.

• Video camera Sony DCR-SR68

  I bought a Sony DCR - SR 68 camcorder opportunity, taking nice videos. The problems started when I tried to connect the camera to my computer to download videos; the computer does not recognize the camera. I bought a new power cord patch directly to parts of Sony, but it made no difference. My question is this; It had to be a software CD provided with the camera when it was purchased new one would download on your computer so that the computer will 'see' the recorded video when you plugged into the computer? Any info anyone could send me would be GREATLY appreciated! Don

  So, I tried all the suggestions that have been given and; did not work. Unable to download Sony's suggested reading memories because my computer is Windows XP and download requires Vista 7 or more recent system. Have you tried the camera to the computer of a friend who is much more recent than mine but he has the last iteneration of Windows XP for the operating system, and it opened fine on his office, then that may of little help... Don