soon more fast faster. Comparison of speed of dim v.s. table 1 object dict.

Similar Questions

• What is better/more-fast: indexes all first or inserts first?

  I created a couple of TABLEs.
  
  Now I have todo, more than two tasks:
  
  1.) Insert about 50000 to 100000 records in each TABLE
  2.) CREATE index for these tables
  
  What is better/more-fast:
  
  Do not perform on the first task 1. or a task 2?
  
  Peter

  If it is possible to load the data in ascending order (linked to index), consider this note of documentation of CREATE INDEX:

  KIND | NOSORT
  By default, Oracle database sorts the index in ascending order, when it creates the index. You can specify NOSORT to indicate to the database that the lines are already stored in the database in ascending order, so that the Oracle database is not necessary to sort the rows when you create the index. If the indexed column lines are not stored in ascending order, then the database returns an error. For most saves space and time to sort, use the following clause immediately after the initial loading of rows in a table. If you specify any of these keywords, then SORT is the default value.

• How to turn off the tone car audio when playing at more fast speed CC14?

  I'm interested in disabling the audio pitch corrected during playback to higher than normal speed using he'S or LLL on the keyboard.   He does not have my workflow and causes a slow down due to the incompatible CTI skip when the playback speed changes.

  Yet once how can I disable the automatic pitch correction when reading timeline or clips to higher than normal speed?

  I like that Adobe did all the updates major at a high speed and all, but I find more UI bugs because of that and it would be nice to have more freedom in preferences to turn some of these new things that could be causing problems.

  Hey, Cliff,

  Check out the preferences > Audio > maintain during rewinding.

  Thank you

  Kevin

• My HP Pavilion Notebook of 15 will take more fast RAM?

  I recently bought a laptop HP Pavilion 15 - p199sa that has a single stick of RAM 8 GB which I want to change for 2x4gb or 2x8GB modules in order to use the dual channel operation.

  Installed the module is DDR3-1600 (PC3-12800).

  I ran the memory key auditor and among the 'compatible results' he returned DDR3 1866 (PC3-14900) modules.

  I also ran "HWinFO64" that says that the current "maximum supported clock" is 800 Mhz - this will be changed in the BIOS or something, if this notebook can use faster RAM?

  Finally, I'm looking for the 1866 DDR3 (PC3-14900) modules to have coverage so I can't see if they have 4 or 8 black blocks on them - is this a problem, too? (I have read in a message here, "HPs really want memory low density... "8 black blocks each side.

  Thank you for your time

  John latter

  If you put in memory PC3-14900 (DDR3-1866) works but she will downclock at 1600 mhz speed. It's 800 mhz and double speed (2 x) up to 1600. There is no way to make the memory bus run faster for you would be wasting money and effort to try to bring in something faster. If you want the laptop to be generally more sensitive than install an SSD.  And Yes, HP laptops prefer low density memory.

• Disabling of certain internet start-up more faster (& start)

  If I disable some unnecessary under STARTUP items (that is in respect of SERVICES also?), which should also do my INTERNET SURFING FASTER, in addition to speed up boot times? For example, because I'm not using my printer for weeks or months, I could disable the three elements related to printers, among others, and then if I need to use the printer, all I have to do is reactivate objects three printer without having to do any re - install? Thank you so much, Joe.

  Hello

  Yes, for more information, see this article limit the number of channels load at the start of this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Check if that helps.

• Request: Make these more fast screws for large tables

  Hey everybody,

  Did anyone mind take a look at these two screws? They work very well for small data sets, but they are starting to take up to 200ms each for large arrays (~ 5000 rows x 2 columns). The first actually sends data to the 2nd, so the total delay when running these screws may be 400, 500 ms. Too much to use them in real time.

  Reminder of how they are used:

  The user can click or click-and - dragging on a graph of intensity to create a card to die to test. These VI are run to update a list of that die are selected and a list of how the machine will move. In mode click - drag, these VI create a very big delay in the response of the public Service.

  First VI:

  The entrance is a 2D table 1 or 0, indicating the test or not test. The output is a 2D line (Nx2) table, column numbers should be probed.

  Second VI:

  The entrance is a table 2D (Nx2) R, C numbers (from the 1st VI). This VI calculates a relative movement of the current matrix with the following matrix. The output is a table 2D (Nx2) of the relative motions (Y, X). Example: ((2,4), (5.1)) back in ((0,0), (3, -3)).

  I've already cut the running time up to half of what it was, but it is still not fast enough. And Yes, the limits of error are not connected, I know :-)

  Screws (also attached):

  

  

  So, what do you think? Is there some Subvi I don't know which completely replaces the 1st VI? Is one of the Subvi I use inherently slow?

  
  

• Pavilion TS 15n-070sa: more fast motherboard for HP Pavilion TS 15n-070sa

  Product name: HP Pavilion TS 15n-070sa

  Product number: E7G63EA

  OS: Windows 10 (primary), Kali Linux Sana (2.0)

  Recent hardware changes: None

  Problem:

  Recently, I decided to upgrade my Pavilion TS 15n-070sa processor. However, I took soon a problem after having disassembled my hard drive, due to the fact the processor is soldered to the Board rather than just locked to it. Then, I got a glance in the maintenance and service guide, which made me think that the other portable Pavilion TS 15 could have the same shape of the investment just (perhaps) with a better processor and motherboard. However, I am still not sure of the fact that last and that's why I came here to ask where I could get a replacement and a better motherboard for my laptop.

  It would be the best motherboard:

  AMD A10 - 5745 M 8670 M 2.9 GHz/2.1 GHz (2 GB L2, 1333 MHz DDR3L Quad 25 W) for use with Standard Windows. 734824 501

  Here is the Service Manual:

  Repair manuals

  HP is out of stock.

  http://www.discounteddealz.com/product.asp?Itemid=327740&gclid=CIC4jIq6k8oCFQEcaQodVJ4BZA

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• More fast Multiple difficulty GPS mode

  I use the GPS to the OS 6 to get the latitude and logitude of an object in motion (multiple fix using LocationListener)... I would like to know what criteria or the mode to use so that I can get the data as soon as possible... The carreier I use is GSM...

  For the quickest fix, you can use the geolocation

  See here

  http://supportforums.BlackBerry.com/T5/Java-development/location-APIs-start-to-finish/Ta-p/571949

• VM network transfer speeds are two times faster than the speed of the physical network

  My stats from the server:

  HP Proliant ML110 G6

  Intel Xeon X 3440 @ 2.53 GHz

  8 GB RAM

  1 Gigabit NIC onboard

  1 PCIx dual port Intel Gigabit NIC

  1 1 to Seagate HARD drive (for virtual machines and ISO storage)

  4 1 to HP 7200 RPM hard drives

  ESXi 5.5 U2

  Network:

  Belkin AC1200 F9K1113v4 Gigabit router

  Computer:

  Sony Vaio i5 2440 M, 8 GB, 5400 RPM HDD

  The main objective of the ESXi server should be used as a NAS, but with the additional ability to run Windows or Linux VM casual as a game server.  I currently have Open Media Vault controls 1 to 4 hard drives in a configuration RAID10 of software with a plugin SMB/CIFS to provide access to the shares through the windows.

  Network management is through the card on board.  OMV uses its own port on the Intel network card.

  The problem:

  Transfers of networks (upload) to my Windows 7 PC to NAS OMV are slow (average 40MBps).  Playback speed (downloads) of SIN is about 100 Mbps, which is decent.  I tested the disk write speed using the hdparm since the console command, and they are all on average 110 - 130 Mbps.  Why is my computer so slow transfer speeds?  Is there a setting to ESXi which limits my network connection?

  Some things I noticed:

  If only I start a computer Windows 7 virtual on ESXi VMNetwork, my transfers from the Windows 7 VM to the NAS VM on average 105 MB/s, while the playback speed is around 90MBps.  If I could get my physical network to transfer at these speeds, it would be satisfactory.

  Can someone help me?

  Hello

  I presume that the OMV is the culprit here. See for example this discussion: http://forums.openmediavault.org/index.php/Thread/5507-Extreme-slow-samba-speeds/

  You may be able to resolve the server Samba inside the OMV.

  cykVM

• Help on more fast/more fast rendering

  Hello guys!

  I recently did a project with dimensions of 2160 3820 (no more than 01:05) on consequences.

  The minutes taken 9 to 12 hours. That being said, if I'm getting handed another project with these dimensions once again, which suggests you do strongly avoid those long makes?

  Here is my information machines:

  
  

  Processor: Intel Core i7 2 GHz

  Memory: 16 GB 1600 MHz DDR3

  
  

  I also budget by getting a new machines before rendering, I thought to an iMac with this features:

  
  

  Processor: 3.5 GHz Quad-core Intel Core i5, Turbo Boost up to 3.9 GHz

  Memory: 32 GB 1600 MHz DDR3 SDRAM - 4x8Go

  What do you think guys? Please let me know your thoughts and suggestions!

  Thank you!

  AHA! You owe it to yourself to find out what the people who play this kind of thing is really needed.  In other words, you need delivery specifications.

  They play back six individual files?

  If the device needs six individual files, how are these oriented vertical monitors so he is not reading a file backwards?

  The playback device does a monster lead in gigantic proportions?

  What type of video file they need: AVI? QuickTime Movie?  MP4?

  What kind of codec need: Photo JPEG?  H.264?  PNG?

  No transcoding system to play your files as it ingests the?

  How often is this thing needs for playback?

  Once you know which actually GIVES you, you will have a much better idea of how to proceed with your project.  From what you have disclosed so far, you have a lot of nothing.

• Compaq Presario CQ62-214NR: modules SODIMM more faster/more-great for Compaq Presario CQ62-214NR?

  I have 1x2BG of DDR2 in this machine right now.  I need to pass in 2x2gb and looked at PC2-6400 sets.  But the .pdf manual says can take DDR3 1333 MHz PC3-1066.  Is this really true?  When I go to the essentials and other sites of the manufacturers, they always use DDR2.

  A few eBay sellers say the works of DDR3, but I do not trust their word, because the photos show the notch located in a different place for DDR3.

  In addition, what densities?

  Thank you!

  Hello

  Firstly, PC2 and PC3 doesn't switchable because physically RAM PC3 will not fit in the slot PC2. I can't find the fi\ull of your computer specifications.  Please use the following site to scan your machine. It will tell you exactly what you need and where to buy, or you can also use the information to buy elsewhere:

  http://www.crucial.com/USA/en/systemscanner

  Kind regards.

• The easy/more faster way to change my IP address?

  Using a DSL with an Actiontec GT784. So far, I had to turn off the modem for a few seconds I don't have the password. Is there an easier way to do this?  Using a DSL connection.  Up til now I had to turn off the modem for a few seconds.  Its an Actiontec 701 d.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you do not want to change your IP address.

  You can try the steps below and check.

  1. find your IP from the ISP.

  2 copy.

  3. open network & sharing Center

  4. open the network properties you what your IP to change. In my case, it's an EVDO modem.

  5. on the network tab, double-click TCP/IPv4, which will open a window to change the IP and DNS IP address.

  6. in this window click on "use following IP address" and paste this IP address you copied in step 2.

  7 change the last digit of the IP address to any value above him for example if its 192.168.23.123 change the last digit to something like 122 so that the IP address becomes 192.168.23.122.

  8. click on OK until that close all windows.

  9 disconnect from this network.

  10 reconnect to this network and if it goes as planned the ISP should force a dynamic IP address.

  Now, check if you have changed the IP address. If you can not browse, go to step 6, and then select "Obtain an IP address automatically" and then disconnect-> reconnect to the network.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• More faster/more efficient way to generate captions?

  Is there a way to automatically generate captions when I place a new image? At present, the only option is to either place the legend right after that I have place the image or to generate a legend later - there is no option to put automatically with the image itself.

  Also - did someone come with a script that allows a keyboard shortcut that generates a static caption? It would be nice if Adobe came with these...

  There are "Labelgraphics in' script create captions for all the images in your document, I test with indesign cs6 and it work very well.

  See the link:

  http://InDesignSecrets.com/modified-script-adds-captions-from-Clipboard-to-images.php

• More RAM will increase the speed?

  Our iMac with an Intel Core 2 Duo 3.06 Ghz and 4 GB of RAM, running OS 10.10.5 slowed way. If both users are online, the second user account takes forever to initialize.

  We have two empty RAM slots and wonder if the additional RAM would ease the problem. Or do we need a newer, faster processor, which I assume means a new computer.

  Paul B.

  Hi Paul, more than RAM we're crazy. But I don't think it's the whole issue. Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• How to add more than 9 paintings of speed dial?

  Hi, I changed my opera, and I got 15 to 20 paintings on speed dial. Is it possible to have more than 9 in mozilla?

  Hello sonyman, you can enter about: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.newtabpage.columns / browser.newtabpage.rows. Double-click on them and their values accordingly.