Setting the seconds

Similar Questions

• set the second screen as the main screen

  I have an external monitor connected to my macbook pro. Is it possible to put this external monitor as the main screen. It seems that El Captain only opens new windows and applications on Macbook Pro screen.

  You can change the order via system preferences > display > Arrangement. Drag the white line (menubar) on the second screen to make it primary.

• hyperlink to the section in the second window

  Hello everyone
  
  I am trying to create a hyperlink from a topic displayed in the main window of a .chm to an item that appears in a second window of the. chm.
  
  In the past, I created a link to a button to display a topic in a window named on the use of a related Topic.htm technique. I tried to use this technique by using the same Topic.htm related, but it doesn't seem to work.
  
  There may be a simpler way to do this, but I do not know?
  
  Any help gratefully received.

  OK Rick, I could give it a try, but I won't hold my knowledge.

  As for what makes subjects appear in a second set window, you instructions were up, thanks a lot. In fact, I had 3 links to topics that I wanted to appear in a second window. so leaving the first link as

  JavaScript:RelatedTopics.Click();

  then by replacing the second and third to

  JavaScript:OBJECT1. Click(); and JavaScript:OBJECT2. Click();

  and set the second window everything worked like I wanted.

  Once again thank you very much, you're really RoboHelp gurus

• How to set the clock for the hours, minutes, and seconds with Windows XP

  How to set the clock for the hours, minutes, and seconds with Windows XP

  I don't know of your question.  If you ask how to show the clock in the tray system with hours, minutes and seconds, then download & run "Tclock Light".  Windows will not natively display the seconds.

  TClock Light: <> http://homepage1.nifty.com/kazubon/tclocklight/index.html >

  HTH,
  JW

• Setting up the second hard drive preinstalled

  I have a Pavilion m9250f equipped of Windows Vista 64-bit with two 500 GB hard drives.  The first hard disk is almost at capacity (available 15%), and I want to know how to set up the second disc for use.

  Hello

  The SATA controller mode setting is in the bios. F10 will get you into the bios. Back up your data before attempting to make any changes.  If you use the RAID mode then then you will need to enter the Intel RAID CTRL + I utility at startup to disable the parring.  RAID 1 is extra protection in case you have a hard drive failure.  If you disable the RAID 1 parring so be sure to perform backups at a frequency you can live if you experience a hard drive failure.  When the RAID 1 parring is disabled, then the second hard drive will be available for data storage (more than 500GB).  If get you there, then you can do a quick format on the second hard drive.  Now you should be able to move the folders you want to the second hard drive.

• How to send the request to set the id as a parameter in the second competitor program that uses the host program.

  Hello

  I created a set request of 2 concurrent programs. And when I start the game of demand, I need to spend the game id ask competitor second program as parameter. I tried adding the parameter to the second concurrent program using the sql statement and the query such as "select fnd_global.conc_priority_request from" dual But when I submit the application together, by the way-1 as a default setting.

  Can one please let me know how can I move the set request id as parameter to the second program in my game application.

  Thank you.

  Hi my requirement is to send the first programs simultaneous logfile as an attachment in the email when the second program runs. Then for the second program I use a unix script. I used REQID = $4, which will be the ongoing execution of the programs require id and I'm this passage in the following sql query:

  SELECT SUBSTR (fr.logfile_name, INSTR (fr.logfile_name, "/",-1) + 1) filename

  OF LIF, fnd_concurrent_requests en fnd_conc_req_summary_v

  WHERE frv.request_id = fr.request_id

  AND frv.program_short_name LIKE '... »

  AND frv.priority_request_id in (select priority_request_id from fnd_conc_req_summary_v

  where request_id = $REQID);

  This query will be the name of the log file and using the unix command I send you emails.

  Thank you.

• How do you set up ADR in a Weblogic Cluster? On the second server, get "this facility has not yet been configured '...

  We currently have ADR installed 2.0.9 on WLS 10.3.6 running on Windows 2008R2 behind a F5 load balancer. When load balancing sends connections to the server, we have configured everything first, everything works fine. When load balancing sends connections to the server to scale, we get the ADR page with "this facility has not yet been configured. The defaults.xml and related directories were created automatically on the second server. We tried to change the debug.debugger and debug.printDebugToScreen entries in the second server defaults.xml, but nothing happened. What do we lack? How set us the second server?

  The problem has been resolved. After looking at the directories and defaults.xml WLS created on the server to scale out, we thought that the configuration files were not created/copied from the original server. We ran the configuration of 'java-jar ords.war setup' on the second server, restarted the application of WLS and everything started working as expected.

• VMware View customers logout - log for debugging PCoIP shows "sessionDisconnectTimer: set the timer to 2147480 seconds.

  I have operators who are still on my desktop 24/7/365.  Assuming that there are no other problems, they get kicked out of their sessions from view after about 24 days.  We use Thin Clients HP running ThinOS and VMware View Client.  When I check the log for debugging on the Windows 7 VM, I see that when the connection is established, he wrote the following line:

  2014-09-09 08:44:30, 807 DEBUG < MessageFrameWorkDispatch > [wsnm_desktop] sessionDisconnectTimer: set the timer to 2147480 seconds

  After the expiration of the time limit, I get the following messages in the same newspaper and the client disconnects:

  2014-09-09 08:30:08, 571 DEBUG < TimerService > [wsnm_desktop] sessionDisconnectTimer: triggered timer, session is disconnected.

  2014-09-09 08:30:08, 571 DEBUG < TimerService > [wsnm_desktop] session::SessionDisconnectTimedOut: Disconnect message posted on the desktop

  Where it becomes this timer of?  The global setting on the display server is maxed at 9 999 999 minutes.

  The host is EXSi 5.0.0

  VMware View Server is 5.0.0 - 481677

  See Agent 5.0.1

  Operating system is Windows 7 Pro running on the virtual version 7 machine

  It is a known problem that has been fixed in 5.3.2 view - the global time-out in minutes is converted to a time in milliseconds, which then overflows a 32-bit counter. See Overview of VMware View Release Notes

  A desktop session is timeout and be disconnected after about 24 days, 20 hours and 31 minutes, even if the Session time-out setting has been set to a higher value.

  Mike

• When I set the duration for a timelapse, how can I add breaks is not fluid. for example, it removes frames per second. THX

  Casey Neistat made in some of its opening timelapses.

  I don't know how to set the time at 500% etc. that reveals a 'speed up' fluid video, but I have this where 'he' so every second or chopped both frames are removed

  Here is an example, I think: Cadet Vlogger - YouTube World (12 seconds in)

  Thank you

  Try to add the posterize time effect after you have accelerated the clip.

  See you soon,.

  Jeff

• Downloaded LR6 and PS CC without problem. Now being set up on the second computer

  Have PS CC and CC app on desktop and LR6 downloaded without problem. Now being set up on the second computer (Dell Tablet Windows 8.1). CC app downloaded OK, but when I try to download other programs, there is an option for LR5 and PS_CC but not LR6. Any ideas?

  that means generally that your dell unresponsive lr 6 sheet, but satisfied lr 5 card, the system requirements

• Run the second sql statement only if the first sql statement is set to zero.

  Hey guys I seem to have a mental block here. I have two sql statements. I would like to than the second to run only if the first sql statement is set to zero. I know that I can use PLsql but I would really like to see if I can do this with sql upward. Your answers are very much appreciated.
  This is the first sql

    Select     ft.fund_code, 
               ft.orgn_code, 
               ft.acct_code, 
               ft.amount, 
               fb.owner_pidm, 
               ft.prog_code      
        from ftrbremb fb , ftcractg ft
        where fb.doc_code = 'TR000038'
        and fb.ftpbport_id = ft.ftpbport_id

  second sql statement

       Select ft.fund_code, 
               ft.orgn_code, 
               ft.acct_code, 
               ft.amount, 
               fb.owner_pidm, 
               ft.prog_code      
        from ftrbremb fb , ftcractg ft, ftprexps fx
        where fb.doc_code = 'TR000038'
        --and fb.ftpbport_id = ft.ftpbport_id
        and fx.ftrbremb_id = fb.id
        and ft.ftprexps_id = fx.id;

  How can I combine these two statements together so that when the first is null the second run. As a bonus, I want to get just the first line as well.
  Any help would be greatly appreciated. I tried to accomplish with the case statement but it dosent everything seems to work for me.
  Thank you

  Miguel,

  the idea is simple: join the two queries (via the union of all) and to change the second part as to return only the rows if the first query returns no rows by changing the NOT EXISTS (first request). Hope I made it clear... ;)

• How to set the initial focus to the second field?

  Hello
  
  I created one for the user to enter data.
  The first field of the form has a default value.
  Therefore, when the screen is rendered, I would like to put the cursor in the second field for the user to enter data.
  
  How can I do this?
  
  Thank you
  
  Gabor

  Ahh and now for points...

  Set the display of Page attributes > focus cursor "do not carry the cursor".

  This allows your javascript to run.

  Gus...

  You can reward this answer by marking as being useful or correct ;-)

• How to set up the second hard drive

  My Mac Pro has two, the hard drives of 1 TB.  I had originally planned on the use of the second hard drive for Time Machine.  However, instead of using Time Machine, I now save by cloning my first hard drive to an external hard drive using Carbon Copy Cloner.  I did not use Time Machine in a year and do not expect that I have to use more.

  My first hard drive fills up-I have about 150 GB unused on it, and with video editing I'm is squeezed.  What is the best way to configure my system so that I can use my second, now sleeping, hard drive? Is it possible of them gang up together so that my system will behave as if there is a 2 TB HDD?

  Thanks in advance.

  Yes. It is called RAID.

  For more information on how to do this, see https://www.tekrevue.com/tip/create-raid-el-capitan/

• setting the time adding seconds

  Hi guys, I'm stuck and I need help with this one and its emergency situation. I don't have 1 more week to test because I needed to get the data as soon as POSSIBLE. I have this test I've done 1 week, but I messed up on something. I didn't have seconds on my get date/time.  My colleague needs the second in my test in order to get his test results.

  can anyone help me please with this.

  

  on column B, this here a way to generate seconds with labview or excel so that he would not lose the HR/min or its order.

  Please someone help me.

  Hi krispiekream,

  I hate to be the bearer of bad news, but it seems that the worksheet was written as csv - and column B was written exactly as it appears in your message.  In other words, there is no detail "seconds" to display. If a LabVIEW program creates the csv data, this program can be (should be) modified to include the details in seconds!

  Chance/Cheers.

• Windows 7 sees my second monitor as "generic non - PnP" and will not let me set the correct resolution

  Hello

  I just installed Windows 7 Professional 64 bit on a new hard drive on my Dell Studio 540. The PC has a graphics card ATI Radeon HD 3450 and has a Samsung 226bw 22 "monitor on the digital output. This works very well, and has the resolution of 1650 x 4050. When I am running Vista (on the previous hard drive), I got a monitor flat 14 "old on the other out, and it worked fine (although at a lower resolution).

  I added a monitor AOC F22s + on the other output, expecting to be able to put this to the recommended 1920 x 1080 resolution. Unfortunately, Windows has developed the driver for this monitor "Generic non - PnP" and will not let me set the correct resolution. To the maximum it will allow is 1600 x 1200, (as well as all other resolutions it allows) do not use the monitor at maximum capacity, which is the ratio of evil anyway, so the display seems tense.

  I run Windows Update, so have the latest drivers. I tried to install the other drivers, but nothing helped.

  I tried to unplug the Samsung monitor and restart the PC, so that the AOC, one was the only monitor it and he always had as 'Generic non - PnP' with the wrong resolution.

  Someone at - it ideas? I'm at my wits end. AOC support did not understand and could only suggest that the monitor was faulty, but the place where I bought it insist that it works very well and so no Exchange or get a refund (no restocking fee, which is a RIP-OFF).

  I really want to use both screens and would appreciate greatly any help that anyone can give. I hope I gave enough information. If I didn't, please let me know.

  Thanks in advance,

  Alan

  PROBLEM SOLVED!

  It turned out that my VGA cable was wrong and that it was not send the right signal to the computer. The screen worked fine with a VGA monitor, but the PC has not said that the new monitor is a PnP I tried a different cable and it worked fine.

  Thanks again to all who have suggested things.