Sorry for the inconvenience.
Help!
I have an application that works ok for a while now and this morning it failed with LabVIEW to crash and burn.
The error message was the dialogue where it says "LabVIEW 8.6 development system has encountered a problem and needs to close..." »
I've seen this error message before (instead of stangest), but exclusively in development mode. This error has occurred during the March and after several hours to do the same thing (if something was borked in the s/w that he should have not much earlier). Can a doubtful driver / DLL call give this type of error message? As it happens if I particularly trust PC and PCI single board industrial basket because there are a lot of strange behavior, he.
Any ideas?
Thanks for all the suggestions everyone!
I come from the client and the problem of debugging. It was a really weird error message actually come on the screen while another VI was running (and has continued to work very well, with me able to probe the pattern-block etc.!).
The culprit was... a TDMS writing! In another loop I closing the file reference and you try to write to the TDMS file using the now closed reference.
In hindsight, I've seen these types of errors a lot with PDM, when there is a mistake is not exactly a stop appropriate!
Tags: NI Software
Similar Questions
-
The error occurs when I insert the game black & white 2 or command and conquer the first decade and click install on a automotive screens popping up, I am sure that these two errors are almost identical and sure if one is fixed so will the other be.
The error that says "Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »
To try to fix it already I found a page here which tells me how to install drivers different installshield, and I installed everything that have been listed. My operating system is Windows Xp home edition
Hello
Were you able to install these games without any problem before?Step 1: Install all updates of windows on your computer and check the number.
Reference: http://support.microsoft.com/kb/306525
Step 2: Copy the game on your computer, then check the issue.Step 3: Perform the clean boot your computer.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135Note: To restore your computer to a Normal startup mode, follow these steps:
1. click on start in the box start the search.
2. type msconfig and press ENTER.If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
4. When prompted, click on restart.Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Whenever my computer load I get this darn error. Pure Networks Platform Service has encountered a problem and needs to close. We are sorry for the inconvenience. I also get a pop up nmsrvc.exe Application error. The statement as "0x66f23ff0" referenced memory at "0x00000000". The memory could not be 'read' PLEASE HELP!
Hi heat110,-What is the brand and model of the router you are using?-You "Network Magic" software installed on your computer?Method 1: As a first step, try to restart the service of Pure platform of networks on your computer.Follow these steps to do the same thing:a. Click Start. Click run. Type Services.msc and press ENTER.(b) in the Services window, search for Pure Networks Platform service.c. right-click on the service and click on restart.d. restart the computer and check if you have got rid of the error message.Method 2: Uninstall Network Magic software and then re - install the software by downloading from the website of the manufacturer if necessary. -
TCP/UDP endpoint Viewer has encountered a problem and needs to close. We are sorry for the inconvenience. It appears each time I try to open the tcp view to monitor connections to my computer. Why is it that happens when I open other downloads very well - including tcpvcon.
Hello
I suggest you post this question in the Windows XP IT Pro forums: http://social.technet.microsoft.com/Forums/en-US/category/windowsxpitpro
Thank you.
-
This problem deals with only one of my user accounts, where the user accounts function correctly. When my wife logs in to his user account, it receives the error "windows Explorer has encountered a problem and needs to close, sorry for the inconvenience." No ICONS or deskbar charge upward; However, my daughter and my user account functions properly.
I did a system successfully restore to a previous point, but the problem remains.
If you are still having problems with Windows Explorer crashing, I suggest to consider the suggestion offered by ShadowKat:
"Hello people, it seems that some guys out there are still having trouble with this random crashes. I have the same problem, except that it happens every time that I go to my media files on my NAS. It seems that there is a bug or something with windows that causes this problem when you access a folder to storage media like mine, especially when the size of the file is very large (archive all my discs of film there for convenience and continuous =), about 1 TB of data). Windows capable of generating thumbnail images for your files and blocks the Explorer as well.
I solved this by going to my computer > click the "Organize" (upper-left) > folder and search options > view tab check "Show icons, never thumbnails" option and uncheck the "display file on the photos." This prevents windows to generate images and solved the problem for me. Less visually flashy Yes, but at least not need a cloth and restart is).I hope this helps and good luck!ShadowKat. »If you're still having problems after this, I suggest that to start a new thread in the following location:I hope this helps. -
Spooler SubSystem App has encountered a problem and needs to close. We are sorry for the inconvenience.
Hello
1. When you get this error message?
2. that you get this error message when printing?
3. What is the brand and model of the printer?
4. don't you make changes to the computer before the show?
Please provide us with more information on this issue to help you best.
If you get this error when printing, follow the steps from the link below.
Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/kb/322756
How to back up and restore the registry in Windows
-
Trying to get my Microsoft Life Cam HD5000 video work. He worked until a week on Windows XP there and all of a sudden stopped sending this message
LifeCam.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
I uninstalled the program and reinstalled and this notice appears again with this 'mistake' being
AppName: lifecam.exe AppVer: 3.60.253.0 ModName: kernel32.dll
Any ideas on how to fix as all drivers are up-to-date and update of the software. As mentioned he wasn't working a week so there is no idea why the video suddenly stopped.
Concerned
Hi Concerned25,
This problem may occur if you have one of the programs listed below, installed in conjunction with the lifecam.
Earthlink total access.
Venturi VClient
Nero
Studio9 Pinnacle systems software
F-Secure internet security
Dell Web cyber coach
AOL or Yahoo toolbar
FixIt utility.
To solve this problem and find workarounds, see the link below.
-
Original Titus: cannot install software blackberry "BOLD"
When I start the software Black Berry through the icon to the desktop, the windows error reporting or display below:
Quote: Black Berry Desktop has encountered a problem and needs to close. We are sorry for the inconvenience.
If you were in the middle of something, the information you were working on might be lost.
Please tell this problem to Microsoft.
We have created an error report that you can send improve us Black Berry Desktop Software. We will treat this report as confidential and anonyomous.
End of quote
What data means this error report contain?
Why should I report to Microsoft?
I received error below during the repair software blackberry
Quote: The path:
' C:\DOCUME "1\HLZUTS" 2\LOCALS "1\TEMP\WZSE1. Berry TEMP\BLACK Office software.msi' is not found. Make sure you have access to this location and try again, or try to find the installation package "Black Berry Desktop Software.msi" as a folder that you can install the Black Berry Desktop Software 6.1 product
End of quote
No path
Hi ZiaHL,
Try the steps listed in the article mentioned below and check if it helps you to fix the problem:
"BlackBerry Desktop Manager has encountered a problem and needs to close. We are sorry for the inconvenience. "during the synchronization process
You can also view the article mentioned below for more information:
BlackBerry Desktop Software issues fixed in this release
Let us know if that helps.
-
Original title: Tamper monitor
I KEEP AN ERROR MESSAGE "TAMPER MONITOR HAS ENCOUNTERED A PROBLEM AND NEEDS TO CLOSE. WE ARE SORRY FOR THE INCONVENIENCE ". HE COME EVERY 3 TO 4 MINUTES, IF YOU CLICK SEND ERROR REPORT OR DON'T SEND IT DISAPPEARS, BUT RETURNS. IF YOU DO NOT CLICK ON FOR A FEW MINUTES, IT FREEZES AND WILL NOT GO OFF THE SCREEN NO MATTER WHAT YOU DO. HOW CAN I SOLVE THIS PROBLEM...
Hello
1. have you installed Norton Security software on your computer?
Sabotage monitor (tapmon.exe) is associated with a component of Norton called Norton safety Minder. I would ask you to uninstall and reinstall the Norton Security software and check. You can also contact Norton support on this issue.
Check out the articles below to uninstall and reinstall the programs in Windows XP.
How to change or remove a program in Windows XP
http://support.Microsoft.com/kb/307895Installation of programs
http://www.Microsoft.com/windowsxp/using/Setup/hwandprograms/installprog.mspxSupport Norton:
http://www.Symantec.com/support/index.jspNote:
It is recommended to install the software of security immediately after the issue is resolved.I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Original title: programs appearing and disappearing
Generic Host process for Win 32 services has encountered a problem and needs to close.
Sorry for the inconvenience.
Please tell this problem to MIcrosoft. We have created an error report that you can send to help us improve the generic
Host Process for Win 32 Services. We will treat this report as confidential and anonymous. To see the data click on send
Error report or not send.
I clicked on the error report, and that's what he said... szAppname:svchost.exe szAppver: 5.1.2600.5512
szModver: 5.1.2600.5755 szModname: ntdll.dll compensate 00023845 etc, etc.Hi 1jimbo1,
1. when exactly you receive this error message?
2. did you of recent changes to the computer?Method 1:
Step 1:
You can try to start in safe mode and check if the problem occurs.
Check out the link for more information on starting your computer in SafeMode below:
http://support.Microsoft.com/kb/315222
Step 2:
If the problem does not happen in safe mode and then, try to perform a clean boot.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
http://support.Microsoft.com/kb/310353
If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.
After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows XP to start normally.
Method 2:
You can also check the following link and complete the scan line on your computer to check whether your computer is infected with a virus or not.
http://OneCare.live.com/site/en-us/default.html
Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Hi team,
I get this error window again and again. It keeps popping up."scnotification has encountered a problem and need to close. We are sorry for the inconvenience. "When I tried in the sites I don't get the solution for this.Please help me to disable.Thank youSandeshHey Anshul,
Yes, it's in the domain network.No hardware / software changes have been made.normally when I opened all the windows / browsers, this will start to come.I am running windows XP.Please tell me why it is causing the problem.Thank youSandeshThis forum is designed for Windows 7. Furthermore, the guys here, will not be able to answer your questions about a domain network.
You can find someone who knows more about the Microsoft Technet forums - (the link is on the Aussie forum). These are the nuts and bolts of good Windows forums.
See you soon!
-
I can't see my products. This is the messege: "for reasons of scheduled maintenance plans cannot be displayed. Sorry for the inconvenience. »
Was it a problem persistent or is - this time you see a message that the interview is happening?
Make sure you have enabled cookies, clear your cookie cache. If he continues to not try to use a different browser.
-
Photoshop Elements 12
Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.
Error code: c0000005
Address: 75e32f71
I clicked on the OK button and the closed Downloader.
I did a search on this (c0000005) error code and it seems to be a work around, but no solutions, why is this? I ask that because that this problem seems to be years and years, dating back to at least 2005 (math is 10 years do).
I don't even have the hanging camera and I get this error on download. I have redownloaded everything and reinstalled. I allso see AVI issues reported with this problem, so I've updated Quicktime that without the camera being hung when I get this error I wasn't expecting it to work. I tried to support and they would not help because I bought it in March this year. Quite frustrating because I bought elements about every 2 years. I think I might need a new codec? I had this problem on an earlier version and I think I remember that being the fix, but it may be something completely different
Finally, I found it lacking a photo so the catalogue was "corrupted". I just deleted the image and it started working.
I hate Adobe and their total lack of support - thanks for nothing Adobe. Also get this - they offered me to upgrade to 13.0 (12.0 My is only 6 months old but they still can't stand on errors. Install only the errors!
I've upgraded and buy this product 4 times now. I'll find something else next time!
-
GAME. EXE HAS ENCOUNTERED A PROBLEM, WE'RE SORRY FOR THE INCONVENIENCE
I USE WIN XP SP2. EARLIER I USED TO PLAY DOWNLOADED GAMES THROUGH WWW.MYPLAYCITY.COM., BUT now THOSE GAMES R NOT RUNNING AS APPL DISPLAYS ERROR SIG_APPNAME:game.exe offset: 0001 has 127 / / window becomes black
Please suggest me
Hi SHIVBALAK,
1. are you able to launch other games?
2. don't you make changes to the computer before the show?
You can try the following steps mentioned below and check if it helps.
Method 1: Run the game by putting the computer in a clean boot state
http://support.Microsoft.com/kb/310353
If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.
In addition, after you resolve the problem, see the section on boot link to how to restore your computer to a Normal startup mode by following the steps to configure Windows to use a Normal startup state.
Method 2:
You can read the following article and check.
Resources for troubleshooting games and multimedia in Windows XP
http://support.Microsoft.com/kb/310697
I also suggest you look for the details of the exact problem of the event log.
http://support.Microsoft.com/kb/308427
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I use windows xp service pack 3 edition 2002
This MSG occur when installing dot net framework 4.0 and 4.5 also office 2007, but I install other software without problems as MSSQL Server 2008 R2 and other software run correctly
some of the software show that the msg of error, how to fix this error?
Error signature
EventType: vssetup P1: Configure P2: unknown P3: 10.0.30319.1
P4: 1 P5: P6: none_ui_interactive_crash P7: 0xe06d7363
P8: P9 0:You should consult the Setup for the error codes log.
These can be useful:
Troubleshooting the installation of .NET Framework 4 chess
John
-
I've exhausted all the suggestions on the Apple online support page. The thing only I noticed is that the file execute (WINDOWS\system32\svchost.exe - k netsvcs) for the MMC "Application Management" service is missing.
Hello
I recommend you to reinstall Itunes and check if that helps.
If the problem persists, contact Apple support for better aid.
Maybe you are looking for
-
The project packaged libraries
Hi all Currently, I explore on packaged library project and how it can be used to distribute a code. But I have some doubts in this regard. I would like to know whether or not the PPL (i.e.) .lvlibp file will register all the dependencies in vi.lib a
-
MapleStory will not work on Windows 7!
OK so Ive literally tried EVERYTHING, and Ive looked at stuff we do also.I have windows 7, now I would say and old computer desktop, but perhaps on an edition of 2003.But I think that no matter what with her causes, she played other games too. In any
-
The missing files (NOT deleted) of the file/directory of the system drive NTFS
Greetings! I have a WinXP SP3 system with a SATA 2 TB to the additional internal address as a data reader. This player has only the data (.mp3, video) files in a directory and has never been used for anything other than data files. There is only one
-
where can I find download Windows Live One Care?
I uninstalled Windows Live One Care today and I would like to re - install. Cannot find a download of it. Help?
-
BlackBerry Z10 how to check that the battery is 100% charged for Blackberry Z10
Hi, how do I know how much percentage does the battery get charged for BB Z10 mobile.