Sort by check number

Similar Questions

• How to sort a random number without using the command by

  Hello
  
  How must be sorted, 5 random number without the use of order by in PLSQL
  for example.
  amount of ID
  1 2
  2 9
  3 3
  4 5
  5 7
  
  Edited by: sake1 1-dec-2010 08:16

  I used Altavista and found an example, how is it?

  DECLARE
  
    /* there is no built array in oracle, you must declare
    your own */
    TYPE Numarray IS TABLE OF NUMBER INDEX BY BINARY_INTEGER;
  
    /* the array of numbers - using assoc array because I can start
    with zero like traditional arrays */
    Nums Numarray;
  
    n NUMBER := 0;
  
    Temp NUMBER;
  
  BEGIN
  
    /* load up the array, put 20 random values in the array,
    in array indicies 0 to 19 */
    FOR i IN 0 .. 19
  
     LOOP
      Nums(i) :=  Round(Dbms_Random.Value(1, 1000));
    END LOOP;
  
    /* get the array size */
    n :=  Nums.Count();
  
    /* display the unsorted values - loop through the whole array and
    print out the values */
    Dbms_Output.Put_Line('unsorted:');
    FOR i IN Nums.First .. Nums.Last LOOP
      Dbms_Output.Put_Line(Nums(i));
    END LOOP;
  
    /* bubble sort - using two loops, compare each value with the one
    after it
    if the one after the current one is smaller , then
  
    switch their locations in the array, this is just like standard
    bubble sorts
    in other languages. The only real diff is the syntax.
    */
  
    FOR i IN 0 .. n - 1 LOOP
      FOR j IN 0 .. n - (i + 1) - 1 LOOP
  
        IF (Nums(j) > Nums(j + 1)) THEN
          Temp := Nums(j);
          Nums(j) :=  Nums(j + 1);
          Nums(j + 1) :=  Temp;
        END IF;
  
      END LOOP;
    END LOOP;
  
    /* display the values sorted */
    Dbms_Output.Put_Line('sorted');
    FOR i IN Nums.First .. Nums.Last LOOP
      Dbms_Output.Put_Line(Chr(9) || Nums(i));
    END LOOP;
  END;
  /*
  unsorted:
  155
  909
  795
  977
  942
  214
  105
  269
  283
  820
  108
  594
  784
  921
  856
  736
  802
  457
  951
  411
  sorted
       105
       108
       155
       214
       269
       283
       411
       457
       594
       736
       784
       795
       802
       820
       856
       909
       921
       942
       951
       977
  
  */
  

  In the code the first comment is wrong in fact, I think, this one:
  "There is no table built in oracle, you must declare your own."
  I remember there are some types of collection of the system, if I not mix with something, I remember there was a sort of like they were undocumented, so we can say legally that the comment in the code has always been right.

• M177fw MFP: Sort directory fax number

  I still need to add to my people fax number phone book. Is there a way to sort the entries rather than just adding them to the end?

  Hi WaltGrosch,

  I checked on our printer Laserjet M177fw lab, unfortunately there isn't a way you can move the names and numbers when they have been entered to add another in alphabetical order. You must remove an entry and add in new to this place, in alphabetical order, each time, then move this one to another area on the list, which would be very laborious. Sorry to be the bearer of bad news.

  Thank you.

• Sort sort the columns number of lines n columns in the RTF PivotTable but hide them.

  Hello

  I'm trying to sort on the columns number of sort for lines n columns in the PivotTable but hide them. Any help appreciated.

  Attached model RTF, XML and output required. Thank you

  Please check your email that I have forwarded to update the model.

  by default, it performs a sort on the column, we used to pivot rows and columns. If we need custom sort, we must specify that column in the logic that was present in the C form field.

  by default, you are as below

  Custom sort

  {INDUSTRY_sort, o = a, t = n} « ; » MONTHS {Month_sort, o = a, t = n} '; SALES '; "' sum '? >

• Checking number WhatsApp

  My phone requires latest numbers used to check whatsapp

  Review: http://www.groovypost.com/howto/setup-and-use-whatsapp-for-windows/

• Calculate/sort by the number of pixels

  It seems to be a simple thing, but I couldn't find any plugin or script to do this. Is this possible? It would be very useful for many of us who sell images online.

  THX/Anna

  www.ayimages.com

  Check your PM Inbox ;-}

• Check the printing sorting problem

  In our checks check printing program do not come in order. On research I discovered that the check numbers are considered to be rather in the form of text and number, so to solve that I am trying to convert the text to a number first check number and then use the sort expression. I am using now, but in error...
  
  <? sort: (<? xdofx:to_number(PaymentNumber/CheckNumber)? >)? >
  
  Could someone point me on whats wrong I do here?
  
  Thanks in advance for your answer.
  Dinesh

  use

• text of interactive report as number sort

  Hello
  
  I was wondering if it is possible in an interactive report of the Apex to sort the text number?
  
  For example, a series of lines of text:
  
  4
  10
  2
  
  would sort as:
  
  10
  2
  4
  
  If it were text. What I'd like to see is:
  
  2
  4
  10
  
  How this could be done?
  
  Thank you.

  If your column contains only numbers, you can use column_name TO_NUMBER (column_name) to convert it to a numeric value and it will sort it correctly.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Apress.com/9781430235125
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• Using SUBSTR to convert part of an IP address to a NUMBER and then sort

  Hello!
  
  I have a table in APEX that IP numbers and was looking for a way to be able to sort out them.
  
  I wrote the following script:
  SELECT TO_NUMBER (SUBSTR (IP, 11)) y
  OF NETWORKINFO y
  ORDER BY y
  
  Which produces the results I'm looking for.
  
  However, I use the 'FORM ON A TABLE WITH REPORT' by their SUMMIT. It is perfect for what I need, but here's my question:
  
  How can I go about adding my custom SQL string to be able to use the feature to sort of this 'FORM ON A TABLE WITH REPORT "?
  
  In the above form, it gives the ability to sort by any column. Is there a way I could do a column hidden, associated with the IP column to sort results?
  
  Sorry if I'm not in all this that claire here - let me see if I can be more specific.
  
  I have the IP addresses which of course do not sort numerically. So I wrote the SQL script above to convert a portion of these IP addresses in a number format.
  
  Is it possible to combine the two in the search function in 'Form on a Table with report' so I can get a user sort by IP number, but behind the scenes it sorts using the SUBSTR value from above?
  
  Thank you for pointing me in the right direction on this subject!
  
  -Igor

  Hi Igor,.

  You can get a custom sort order added to your IP column without needing a second column.

  Consider that the sorting is done strictly from left to right across a string in the column. The string can be any content valid HTML. So you can wrap your string in, say, a SPAN tag and add an attribute to the tag that contains the sort order, you need to forward the text that is displayed to the user. As long as the attribute is properly structured (in other words, all instances are the same length, for example), then sort will work correctly. For example:

  SELECT
  '' || IP || '' Y
  FROM ...
  

  Now you must make sure that the PAD_IP_ADDRESS() function returns the correct values. In IP addresses, you have whatever it is "0.0.0.0" to "255.255.255.255". To sort "digitally", you need fill one or two numbers to get three numbers for each value of - so, "0.0.0.0" becomes "000.000.000.000." You can create a function to do this - something like:

  CREATE OR REPLACE FUNCTION PAD_IP_ADDRESS
  (
    pIP IN VARCHAR2
  )
  RETURN VARCHAR2
  IS
    vIP VARCHAR2(15);
    vTEMP APEX_APPLICATION_GLOBAL.VC_ARR2;
    vSEP VARCHAR2(1);
  BEGIN
    vSEP := '';
    vIP := '';
    vTEMP := APEX_UTIL.STRING_TO_TABLE(pIP,'.');
    FOR x IN 1..vTEMP.COUNT
    LOOP
      vIP := vIP || vSEP || TRIM(TO_CHAR(TO_NUMBER(vTEMP(x)),'000'));
      vSEP := '.';
    END LOOP;
    RETURN vIP;
  END;
  

  The result of this would look like:

  <span title="001.001.001.001">1.1.1.1</span>
  <span title="002.255.255.255">2.255.255.255</span>
  <span title="010.001.199.098">10.1.199.098</span>
  

  Andy

• How to sort layers by 123, instead, abc

  I have the script. including the layers of sort in order of abc.

  #target "Illustrator"
  
  
  /**
   * sort layers (with sublayer)
   */
  
  
  var doc = app.documents[0];
  var lay = doc.layers;
  var array_primary = [];
  for (var i=0, iL=lay.length; i < iL ; i++) {
    if (lay[i].layers.length === 0) {
    array_primary.push( lay[i].name );
    }
    else {
    array_primary.push( lay[i].name );
    var array_secondary = [];
    for (var j=0, jL=lay[i].layers.length; j < jL ; j++) {
    array_secondary.push(lay[i].layers[j].name);
    };
    var result2 = array_secondary.sort( function (a,b) { return a > b });
    // sort sublayers
    sort_layer (lay[i], result2);
    }
  };
  var result1 = array_primary.sort( function(a,b) { return a > b } );
  
  
  // sort layers
  sort_layer (doc, result1);
  
  
  function sort_layer (obj, array) {
    for (var ri=0, riL=array.length; ri < riL ; ri++) {
    obj.layers.getByName(array[ri]).zOrder( ZOrderMethod.SENDTOBACK );
    };
  }
  

  For example, I layer names:

  Layer # 116

  Layer # 12

  Layer # 117

  Layer # 32

  Layer n ° 3

  This script sorting like:

  Layer # 116

  Layer # 117

  Layer # 12

  Layer n ° 3

  Layer # 32

  But I want to make to increase:

  Layer n ° 3

  Layer # 12

  Layer # 32

  Layer # 116

  Layer # 117

  Please, help me to do right!

  Ch ch ch check it out!

  The sort function is changed out of the non-numeric characters and then analyse int to be able to sort by the number vs string.

  #target illustrator-20
  function test(){
    /**
    * sort layers (with sublayer)
    */
    function sortNumeric(a, b){
      a = a.replace(/[^\d]+/g, '');
      b = b.replace(/[^\d]+/g, '');
      return parseInt(a) > parseInt(b);
    };
  
    var doc = app.documents[0];
    var lay = doc.layers;
    var array_primary = [];
    for (var i=0, iL=lay.length; i < iL ; i++) {
      if (lay[i].layers.length === 0) {
      array_primary.push( lay[i].name );
      }
      else {
      array_primary.push( lay[i].name );
      var array_secondary = [];
      for (var j=0, jL=lay[i].layers.length; j < jL ; j++) {
      array_secondary.push(lay[i].layers[j].name);
      };
      var result2 = array_secondary.sort( sortNumeric);
      // sort sublayers
      sort_layer (lay[i], result2);
      }
    };
    var result1 = array_primary.sort( sortNumeric ); 
  
    // sort layers
    sort_layer (doc, result1); 
  
    function sort_layer (obj, array) {
      for (var ri=0, riL=array.length; ri < riL ; ri++) {
      obj.layers.getByName(array[ri]).zOrder( ZOrderMethod.SENDTOBACK );
      };
    }
  };
  test();
  

• Photoshop invites to indicate the serial number after the purchase of subscription of photography

  Hello, recently I got subscription photography. After the signed cloud photoshop wonder a serial number.

  I had a conversation with a representative of adobe, who advised me to contact technical support, he said that the side Adobe I have no registered subscription (even though I have one in my profile and I have an order id).

  On the contact page, it has been said that management is too important, so I'm here...

  My products can display only the things that were saved, which you can't do because PS - CC requires a serial number, so maybe it is normal that nothing is listed, there, again.

  Check the evidence of your subscription, here, in the section orders:

  https://www.Adobe.com/account/account-orders.html

  For mine, I see a subscription purchase confirmation and the list of transactions monthly, similar to what is shown in two parts on creative.adobe.com.

  If none is at this link www.adobe.com then there may be a problem buying due to payment order repairman not Adobe, and you can find relief with someone like the Beverly who seems to solve problems of purchase/credit popular, after they display on this forum; However, your topic forum post, referring to the serial number of problems, by not buying not problems, offers a technical support solution, so it can be overlooked by someone like Beverly.

  If something is listed for your purchase on www.adobe.com , the issue could be a problem with licenses or the app Manager CC data stored on your local computer, whatever done PS - CC think he needs a serial number, and probably a technical support person to connect remotely and hack something to get PS - CC to understand you are allowed.  Logging usually outside and in the CC Manager is enough to have the Manager CC rescan and figure things, but usually happens in cases where a serial number is not required for the app Manager CC does not see that the PS is allowed.

  Another idea is that perhaps the type of purchase, you did through DigitalRiver has a sort of serial number associated with that would be included in a letter of confirmation of the order, to verify all e-mails or digital recipes that you received during the order process to see if a serial number is listed.

  Finally, where do you have the PS - CC version you have installed?  If it wasn't in the either a button in the application of CC-Manager or an icon on the creative.adobe.com pages, then it may be the wrong version, and the fix would be to uninstall what you have and download and install the version CC-Manager/creation, and it might be useful to do, anyway, even if you don't think that you have installed the correct version in case something does not quite work in the first installation.  I don't know if your European location would cause the wrong version to download.

• Where can I find the "order number" during the installation of Adobe Creative Suite 6?

  I can't find any "order number" what so ever. All I have is the 'product code' which is printed on the yellow booklet which accompanies the software. I tried to enter this code in the 'order number' box and there are too many characters so he can fit in the area. Hense, I received an email off Apple saying that it didn't work. However, they said that this 'product code' was the correct code and that I should use, so why it does not work? I found a set of instructions explaining how to install this software online and it said to get the 'order number' I need to go to "my order history" I did... and apparently I have no history of buy anything when clearly this is false, because I bought the software package with my macbook on Monday 11 March 2013 (3 days ago). I called the Apple Store in Birmingham and the guy I talked talked me through the installation of the software on a trial basis, using the disc that came with the package. He said once it was installed, it would give me the possibility to test in the real version and could provide me with a code to do this. It did not. I'm almost tearing my hair. Someone help me please? I am a student and need the "serial number" (I think that's what his name) in order to prove that I have a legitimate copy of the software. But before you enter the serial number I need to sort this 'order number' so I can send my file and prove that I am a student. I also want to be able to use the software as soon as possible, I study Graphic Design and that is why I bought it.

  the order number is provided by the vendor who sold the software.  Check your Bill.

• Incorrect Photo sort

  I am running OSX 10.11.2 and Photos 1.3 on a MacBook Pro 5.5 (2009)

  (a) when I load pictures taken on my iPhone in pictures, they will appear out of sequence of loaded photos from my camera, for example an iPhoto photo taken at noon, may appear the same day after a seizure on my camera to 1500hrs

  (b) the pictures loaded from my camera on different days appeared on the Photos as a 'Moment': I can't divide by 2 the way I have in iPhoto 'Events '.

  Are there workarounds for these issues? I searched for them, but not found to date.

  (a) when I load pictures taken on my iPhone in pictures, they will appear out of sequence of loaded photos from my camera, for example an iPhoto photo taken at noon, may appear the same day after a seizure on my camera to 1500hrs

  Where are the photos appearing out of sequence?  In the album "all the Photos?  That's to be expected - this album will be sorted by the date that you imported photos.

  In any other album, you should be able to sort photos by date of capture. CTRL-click the album or smart album and use the command ' sort > keep sorted by > more former/Newest first:

  

  The times must be sorted by the date of capture automatically.  If they are sorted incorrectly, check the date and time in your camera, if the settings are the same.  "If this is not the case, use the command Image > adjust & time" to correct the time parameters for the pictures which are sorted incorrectlly.

  It could be a problem of time zone.  If you take photos in a different time zone, you imported the computer the Photos.app uses the time zone of time current system for the photos you import. Hat can change the time of a few hours.

  If the dates & times for pictures taken with a camera adjustments, you can collect in a smart album with the rule: camera model is...

  

• How can I check on 5 d mk3 shutter count

  How can I check number of shutter on 5 d mk3. Someone said it was available on disk utilities, but I can't.

  See you soon

  Tony

  I sent you a PM.

• Help me determine the revision number [Studio 1537]

  Dell Studio 1537 laptop (IE. 2009)

  I'm trying to determine what replacement lid, hinges and the bezel I should order for fix up of my old Studio before I sell it.  I know that I should be able to disassemble and read labels to find out what revision it is, but staff repair Dells exchanged so many parts around during the process when I had sent in their I don't know what are the original parts, or where I could look at to determine what revision number, I would need with the current configuration.  Any advice would be appreciated.  Read on for more details...

  The problem

  The bezel fits the cover properly, but not around the screen.  It covers the bottom edge and one side of the screen by about 1/8 ", although there is a black area exposed on the top edge and the opposite side.  Basically, it seems that the lcd screen is not properly aligned inside the cover, but I removed the bezel to fix it myself to see that the screen is mounded and well aligned.  After some research I remember reading something on the various revisions of the Studio 15 series, using different parts, which are not all compatible between them, but I don't know if the cover is the cause of the problem, or have the bezel bad for this cover... or if these parts are, but the LCD is bad for both.  so the last however-many-years, I lived with the screen out of the Center.

  To add more complications to the problem, I know that there are several other parts changed to a time or an other (see below for details), so cannot be sure that, if necessary, are original.  The only part I feel confident comes from my original CD is the lower cover that has the number of Service and other info stickers on.  It's all a big cover tho, so it could easily had been changed from one unit to another.  So with that taken into account, indeed, I know not what is original and what is not, or what part should I use to find the correct revision number and get the replacement parts for the cover right.

  Any ideas where I could look to find the revision number of right for the parts that are on it now?  My best guess is that I should see exactly what LCD is in it and go from there.  I think that since it is the only part that I want to keep the cover Assembly, so I should try to match everything to her.  I'm pretty sure that any revision of the lid will be attached to the base without problem, but again, I don't know that for sure.  If no indication would be greatly appreciated.

  History

  I had to sent to Dell warranty to correct the anomaly of the hinge that was common with these models of Studio, but when I got back, they put a bunch of parts wrong inside.  The glasses fit properly around the screen, the keyboard was not backlit, the hard drive has been the ability of bad, and they changed the rest-wrists/trackpad "marbled" design that was used on previous models.  I had to send it back to them 3 times, before they managed to return to me with especially good pieces in total.  It is in his possession or in transit to or from, for a total of about 3 months before I finally just gave up.

  During this episode, they even called to say that my motherboard need replaced due to damage fluid and that the USB ports were broken, and that it would cost me ~ $350 to fix because it was due to an abuse of the user, so not covered by the warranty.  The laptop works perfectly when I sent it, other than the hinge, and I knew without doubt that fluid had never been spilled on it, and that the USB ports had never given me any problems.  I had to be very strict with them, that I wanted to just hinge replaced, and that if she didn't start and run when I came back, I was going to throw it in the trash, where it belonged and buy a new one, but another company.  As far as I know, these "problems" were never "fixed".  Needless to say, this is the last product of Dell, I bought.

  But back to the point... Then, when they finally got it back to me with only the evil bezel (or lcd panel, or cover... whatever the cause of the problem), and the different style of the palmrest, I said "close enough" and admitted that if I wanted to use the computer, anytime soon, I have to settle with the best effort of incompetent repair staffs and it was her.  So that the how her since then, but at this point, Ive got a new laptop and I would now like to fix their screw-up if I can sell it without taking a hit to his condition.  And in case you were wondering, Yes, the same hinge is broken in the same way, once again, so I need to correct this defect in the design and get the screen/bezel adapted with a correct alignment.  Covers a bit scuffed, so I thought I would buy just a set cover so it is good condition for sale.

  Thank you for taking the time to read and for all the advice

  Okay, so I got parts, and all is right with the world again. Haha. I spent less than $ 20 on a brand-new couvercle lid with hinges, buttons power WLAN, antennas and a new scope.  I had to share my webcam and small green card that defines along the lower part of the cover.  Bezel fits my screen.  Actually ended up getting a cover of art 'Algae' instead of the plain of black or color... the covers of art were actually the cheapest option.  Parts from eBay.

  So here's the rub:. It turns out that the revision number is not relevant.  The items are sorted by part number (P/N), and apparently they used slightly different parts from one year to the other, at least for some parts. Judging from my experience, I would say anyone who attempted to repair game p/n with the same series as you have currently ensure the good editing.

  My 1537 takes a lid of the P600X series (original was P613X, black; replacement is P602X, algae).  Although it looks like any cover would fit, I noticed that the antenna leads on other series were in front of the yew, mine. They were grouped in the same pair, just ran into the lid on opposite sides. It seems that the antenna could possibly be traded around to match the original, but I can't say for sure. It is also possible that the son would still be able to be channelled through the computer and connected to network for both cards, but once again, it is purely speculation on my part.

  The bezel seems to vary depending on what LCD is equipped.  Apparently, there was at least 2 variations, a CFL and LED, backlight as well as changes in the proportions (not sure if these changes are correlated with the backlight, or if these are yet another set of alternatives to consider, as I was not to replace the LCD screen).  From what I understand they have connectors that are different, based on the backlight.  I think mine uses the latest LED backlight, but still once, don't look too far in the screens, it is just the impression I got, and assumes that it is the original Panel, and that Dell did not change with other variants.

  As the bezel, it seems to be the series a bit out there. The injector suitable for my laptop is M135C, although Dell had replaced the original by a M138C, which covers the bottom and left edges of the screen while exposing a black area of the outter screens on the top and side edges straight. The differences are very difficult to detect without having them both in hand to compare, choose different parties based on their appearance is not the way to go.

  Therefore, in summary, I believe that the combination is for my 1537...

  COVER: P600X series

  : LED backlighting

  BEZEL: M135C