Sorting data in Smart View

Similar Questions

• Cannot submit data using Smart View 11.1.2

  Hi all
  
  I have a 11.1.2 job planning environment windows 2008 (x 64) and I installed just the Smart View through the workspace. I am able to connect to planning and ad hoc analysis Essbase DataForms. But I am not able to present data. Every time I come into some number and say present, it gives off that cells with #MISSING. It's as if we're doing an update. This is the case in the Planning and Essbase.
  
  Suggestions, if there is something I have missed? It cannot be a bug because it's one of the most basic things that Smart View must do.
  
  See you soon,.
  Abhishek

  No, can't submit sample-based either. Looks like a compatibility issue with Office 2002. In the Support Matrix, 2003 and 2007 only one is mentioned.

  See you soon,.
  Abhishek

• Smart View for MS Word

  In MS Word I pull data from smart view (using the values get functions) data was appeared correctly but it does not display in thousands here I attached the file and marked in the red circle... How can I set the thousands...

  You change the formatting:

  right click on the value, and then selecting Toggle field codes

  It should be in a format something like that {= HsGetvalue ("", "#POV SIZE") |} SmartView12343242342 | {General |}

  in this code, "Général" is the applied formatting, change it to your desired format by the thousands formatting {= HsGetvalue ("", "#POV SIZE") |} SmartView12343242342 | 0, 0. {00 |} for example will give you thousands, commas, with 2 decimal places.

  hope this helps, let me know if you get stuck.

  Edit:

  Once you modify the code, right click again, disable the field code and update smart display to view the results.

  Edit2:

  If you don't want the separation by commas or decimal places 0, just use

  If you want the comma and no use decimal 0.0,

  If you don't want any comma decimal use 0,.00

  It's the same syntax of formatting that Excel uses.

• Empty columns do not appear in Smart View

  If I open a form of Hyperion planning data in Smart View, columns that contain all the data doesn't appear. Other column having that no data do not appear. So I have to manually enter some dummy figures so that the columns do not appear when I go to Smart View. Is there a way to solve the problem?

  Hey,.

  You have activated the option "Remove columns" in Smart View?

  Smart View Ribbon, click Options > data Options.

  You will find what kind of lines/columns you removed for your worksheet.

  Kind regards

  Manan Shah

• Submit the data Smart View

  Hello

  We cube essbase with Smart View 11.1.2.5.500, users put in place their card smart view presentation technique that extract data from their financial model, my question is that

  When users are ready to send data and connect to essbase, forecast data in the spreadsheet disappear, replace data into Essbase (is there nothing in essbase yet obvious), is any way to avoid this?

  I can add leaf with connection to essbase, then copy the value and submit, it works. But of course, it is not very effective.

  I don't miss something in the smart display setting?

  Thank you

  Dan is correct.  It is expected when connecting to Essbase of Smartview behavior.  The work around what he suggests is also one I have my team to use.  It has additional benefits.  You can do your work on a single sheet and then copy - paste special values only to the Essbase submission page.  In this way, you can use the formula to create your presentation, but not the formula on your shipment page.  Then, you can create a page of validation to make sure that the data matches between the two.

• Smart View - Essbase: connection clear the data grid

  Hi all

  I use Oracle Hyperion Smart View 11.1.2.3.000 and Essbase 11.1.2.3.000.4415 in Excel 2010.

  My spreadsheet contains data that I need to load into Essbase, but when I try to connect, the data grid is disabled...

  I have a workaround: duplicate the sheet, connection, and then copy - paste the data in the sheet of "new".

  It's very frustrating, is someone can help me please?

  See you soon,.

  When you refresh this worksheet for the first time, connecting to Essbase, going to go ahead and automatically retrieve the data of the cube - it is a normal behavior.

  Your solution - make a copy of the grid, refreshment and copy in the back, is the best workaround.

  Thank you!

• Ask Timedout error when sending data from planning thorugh Smart view

  Hello
  
  We receive Request Timed out error when trying to send data to the planning application by using Smart view.
  
  "Unable to connect to the provider because: the request has timed out." Contact your administrator to increase netRetryCount and netRetryInterval. "Is someone can you please tell me where I can increase the time-out settings? Can someone give me the link to the document that detailed the steps to do this.

  Go to the knowledge base and search for document ID 744559.1

  Cause
  By design, Internet Explorer imposes a time-out for the server limit return data. Internet Explorer does not indefinitely wait for the server to come back with data when the server has a problem.

  Smart View communicates via HTTP to which Internet Explorer DLLs are used. Smart Display users who run large queries or have a slow network connection might encounter the error, "the request has timed out. Contact the administrator to increase NetRetryCount and NetRetryInterval. »

  This error message may be misleading because this error also occurs if Internet timeout settings Explorer does not respond to large farms. By default, Internet Explorer has a value of KeepAliveTimeout to a minute and another factor limiting (ServerInfoTimeout) of two minutes.

  Solution
  Please see the following two Microsoft articles for more information:

  http://support.Microsoft.com/kb/813827
  http://support.Microsoft.com/kb/181050

  The following steps must be made with the help of your systems management group. It is recommended that a backup of the registry is performed before making any changes.

  On the client computer, add/update the following registry keys:

  1. open the registry, Start-> Run-> Regedit.

  2. Locate the following section:

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings].

  3. create the new DWORD key with decimal values:

  ReceiveTimeout = 480000

  KeepAliveTimeout = 180000

  ServerInfoTimeout = 180000

  In this example, the ReceiveTimeout setting is 8 minutes. KeepAliveTimeout and ServerInfoTimeout settings are 3 minutes. These values are set to demand longer running more.

  4 restart the machine for the new settings to take effect.

• Smart View shows no value, but a snippet of data not

  I loaded data and calc would be
  
  When I go to smart View-> Refresh
  
  I have no data
  
  I think the my additional complication is my server essbase is also on my laptop
  
  Please notify
  
  Published by: level following December 19, 2011 10:55

  Are you sure you have not navigate without data on?

• View the data in process management in file based on a Smart View formula

  Hello

  Is it possible to view the status of the process management of an entity (document, approved, etc.) in a formula-based Smart View file?

  I know that I can change it in Smart Display Options, but as far as I know it is only for Ad - Hoc.

  Please notify.

  Thank you

  The available functions are only:

  HSSetText, HSGetText, HSCurrency, HSDescription and HS Label; to return the State you need a function that provides information based on the settings of the formulas and is currently not available, so you will need to write an ad-hoc report or VBA to fill in the runtime of a button.

• Error recovery Smart View

  Hello

  We have essbase 11.1.2.4. And financial users connect to the cube by Smart View (11.1.2.5.500), they generally put tabs in place in a worksheet to recover the cost for each tab Center, but he gets the following error:

  Unable to connect to provide. The connection to the server failed. Make sure that the server is running in the specified URL

  But APS and essbase works well.

  Any advice on this

  Thank you

  you could do with a macro and HypConnect

  Details of smartview Developers Guide here:

  HypConnect (vtUserName, vtPassword, vtSheetName, vtFriendlyName)

  Parameters

  vtSheetName: the name of worksheet on which to run the service. If vtSheetName is Null or

  Empty, the active worksheet is used.

  vtUserName: valid username

  vtPassword: the password for this user

  vtFriendlyName: the friendly name of the provider of data connection. It's the connection

  name created by HypCreateConnection.

• Smart View decimal

  I created the report in analytics (connected in English) which consists of the fields of a chain and a single measure (which is formatted by using the thousands separator):

  MEASURE CHAIN

  -----------------------------------

  First 1 000 223

  Second 2 002 322

  When I connect Analytics using a different language (Croatian) the same report appears in the form:

  MEASURE CHAIN

  ------------------------------------

  First 1.000.223

  Second 2.002.322

  This is as expected because in Croatia point is used as the thousands separator and the comma as separator decimal (European system).

  But when I export the report using Smart view to Excel, the data is exported in the first way (having first formatting)

  Since my excel is set to recognize the comma as decimal separator and a period as separator of thousands, the data I export Analytics is unusable. (Keep in mind, that I have even other data excel already formatted in "European way")

  Is there a solution for this problem?

  Do I have to make some corrections in analytics in Excel or in the parameters of SmartView?

  Thanks in advance for the help.

  I solved it by installing the new version of SmartVIew 11.1.2.5.

  It was an older version of the SV.

• Smart View removes non-members of the model after Ad - Hoc analysis

  Hi all

  I have a spreadsheet that I recovered using Smart View 11.1.1.3 against Essbase 11.1.1.3.

  When I update this spreadsheet against using Smart View 11.1.2.5.215 11.1.2.3.500 Essbase spreadsheet seems to be remove the cells whose content is not a member in the database.

  
  

  Rest of the worksheet correctly refreshes and I receive the correct data in the worksheet by using the last smart view, but I need to have the content which is withdrawn.

  
  

  Anyone has any idea what is causing this question to ask?

  
  

  
  

  Thank you

  This has been resolved by an Oracle Doc ID 1571254.1

• Unable to access the Smart View 11.1.2.5.216 in Outlook 2007

  All,

  I uninstalled Smart View 11.1.1.3.x of my MS Windows 7 (x 32) Professional SP1 machine and installed Smart View 11.1.2.5.216 during the same session (that is to say, without having to reboot).

  While SmartView arrives perfectly fine when I access Excel, Word and PowerPoint and I can connect to the 11.1.2.3.00 EMP data sources, I don't see the Ribbon of Smart View under MS Outlook. This is in spite of:

  -After changing my MS Office 2007 installation to run Visual Basic Scripting Support on my PC for MS Outlook 2007 only (i.e., via Control Panel > programs and features > MS Office Standard 2007 > change > add or remove components);

  -remove the key HKEY_CURRENT_USER\Software\Hyperion Solutions and that underlie the subkeys, after uninstalling 11.1.1.3 and before installing 11.1.2.5.216

  There is no disabled COM add-ins displayed in MS Outlook 2007 and there is no other entries related to Hyperion (IE, HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\Addins\Hyperion.CommonAddin) to amend\delete under HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\AddIns. Also, I searched but could not find the Smart View PST file on my machine.

  Has anyone any suggestions as to where else I could be looking or what else I could do to activate the smart display in MS Outlook 2007?

  Thanks in advance.

  JBM

  Have you tried under option

  

  HTH

  Amarnath

  ORACLE | Essbase

• HFM Smart View Issues

  Hello

  I use the standalone 11.1.1.3 HFM. I have connected to the HFM application via the smart view and trying to extract the data. But I get "published" in the cell instead of the data. Alos I put the NOData/MissingLabel # 0. I don't know if I need to change anything in HFM application.

  Please could you help me how to display data in the cell.

  	2014
  	Apr
  [None]	Published

  Thank you

  Michel K

  Changed in Smart mode display option and pulled the date. Now I am able to view the data.

  Thank you

  Michel K

• Question HFM Smart View

  Hello

  I use the standalone 11.1.1.3 HFM. I have connected to the HFM application via the smart view and trying to extract the data. But I get "published" in the cell instead of the data.

  Please could you help me how to display data in the cell.

  	2014
  	Apr
  [None]	Published

  Thank you

  Michel K

  Hello

  Go to view - Options - smartview tab tab. In the State of the cell, select the data rather than managing the process.

  Kind regards

  Thanos