SOUL long delay adding media or presets

Similar Questions

• Want 5530: Long delays want printing 5530 All in One

  Our printer worked beautifully for a long time.  Now, he seems to have an unusual problem.

  When print us something, there is a long delay before the start of printing.  Once printing begins, sometimes to normal speed.  I have not measured the delay to see if it is still the same amount of time.  The delay is measured in minutes.  Often I'll print something and then go do something else until I hear the printer start printing.  During the time I am waiting, responses to the ping packets very good printer.  It is suitable to the management tools and access via its web page (as long as you do not ask to print something).  That tells me that it is not a network problem.  T.He network in our House is wireless.  We tried printing from several different computers to Windows 7, and the behavior is the same.

  The version of the firmware on the printer is ORL1CN1547AR.  Updated HP says that there are no newer drivers available for my system.  I find anywhere that my computer is going to give me the version number of the installed drivers.

  I tried power cycling the printer several times.  My laptop is restarted daily.

  No idea where to go from here?

  Hi ppeters86,

  Please try printing HP and the Scan doctor for me!

  What happens if you make a copy of the glass of the scanner of the printer? You get the same type of delay? Copy of Documents or Photos.

  In the meantime, we will try to disable IPv6 on the printer to ensure that IPv4 is used by your printer and your router on your network.

  • If your printer has a control panel with display, find the IPv6 settings in the advanced network configuration menu and set it Off orDisabled.

  • If your printer does not have a display, use the built-in webserver (EWS) to disable IPv6.

    1. From a computer on your network, type the IP address of your printer in the field URL of your Internet browser.

       NOTE:

       If the Web page appears empty, try another Internet browser.

    2. Click on the network or network tab and open the section or page corresponding to your type of network: wired or wireless.

    3. Select enable IPv4 only (or similar).

       Figure: Example of IPv4 configuration

       

    4. Click on apply and wait for changes are confirmed.

    5. Try to print again.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope hear from you soon!

• at check-in or "SkyDrive" downloading, I get: 1. fairly long delays, 2 Message of XL 'file conversion '. Why?

  File compatibility (?).

  Invariably, when registration to or from "SkyDrive" downloading, I get: 1. long delays, 2 Message of XL 'file conversion '. Why?

  GEO.

  Questions from SkyDrive belong here: http://windowslivehelp.com/product.aspx?productid=6

• Keyboard a long delay by typing, made noise of rattling on speakers for each trait.

  I am running Windows XP on a Dell XPS 400 desktop computer. My keyboard developed a very long delay by combination of keys and would make a clicking sound on the speakers every time that a button is pressed. I used a Logitech wireless keyboard, so I changed the batteries, checked the range to the receiver, still nothing. I bought a wired keyboard USB (new Logitech), thinking that my wireless keyboard was bad. The wired keyboard does exactly the same thing. I checked keyboard settings and everything is set to the fastest setting. I have troubleshooted the device, and that it works correctly. I guess it's some kind of virus or malware, but I use McAfee and I didn't do anything. Also, I tried to do a system restore and I can get the system restore menu, but my mouse moves sporadically and the keys are unusable (it works fine everywhere else). The only command that I can navigate to with the keyboard is the RESTART button. So I can't run a system restore. Any ideas on what it is or how to get rid of?

  Hello Skico25,

  Thank you for your message.  This could be a driver problem.  Access the Web from Logitech site and download/install the latest driver for your device.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• October 11, 2011 updated catchy so long delays for IE8 and Outlook Express

  After you install Microsoft Updates on October 11, 2011, after a system reboot, Internet explore 8 and Outlook Express experience long delays before starting. During this period, the Task Manager is also locked, so I don't see what process is at the origin of the problem.

  I narrowed down it to KB2564958 or KB2592799.

  I've uninstalled and reinstalled the KB2564958 and the KB2592799 and the problem disappeared.

• computer laptop w very long delay Vista at startup

  laptop with Vista starts hard disk only after long delay - 10 min or more.  Boots immediately on a bootable CD.  Hard disk is defined as startup option.  Food has no effect previous restoration has no effect.

  Hello

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  More troubleshooting:

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3 I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Home Premium: Long delay when you open a network share from a computer running the full edition. sometimes 0 x 80070035 path network not found

  Moved here...
  http://social.technet.microsoft.com/Forums/windows/en-US/66ba02d1-4c24-4646-8ebb-61f90482d4ef/home-premium-long-delay-when-opening-a-network-share-from-a-pc-running-ultimate-sometimes?forum=w7itpronetworking

  Hello

  Since you have tried all possible troubleshooting steps which were necessary for the issue to resolved and still the problem persists, I recommend you post the question in the Technet Forums.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.
  Windows 7 IT Pro category

• really long delay before rendering starts?

  I have this ongoing problem (CC2014) where there is a long delay before rendering starts. Nothing fancy or heavy, no effect, MacPro/Yosemite/64 GB of ram, made to the internal SSD flash drive. Sometimes I see a 2, 3, 4, 5 minute delay before construction starts, then my comps short and simple, restore in seconds. Just AE text, shape layers and files placed. No business network, no other applications running.

  Any ideas?

  Mike

  If you use multiprocessing, turn it off & see what happens.  If the time-out period goes away, you may need to reassign your processors & memory for multiprocessing in the AE preferences.

  And it never hurts to purge the memory & cache before a final.

• Error adding media: Audio. M4A - when you import a generic error has occurred, I would like to add a music file in mpeg4 in first 12, thanks for the help

  I would like to add a music file in mpeg4 in first 12 and get:

  Error adding media: Audio. M4A - when importing a generic error has occurred, please help

  gjneudert

  First 12 items on what operating system? Have you updated 12 12.1 still using Help Menu/updates to date of an open project update. Please do.

  But your question immediately...

  Your music is on iTunes?  Please convert your file into WAV version using iTunes, and then import that WAV version in the Premiere Elements project using the first elements add Media/files and folders.

  If you need assistance with how to convert iTunes, please ask.

  iTunes: how to convert a song to a different file format - Apple Support

  We will follow your activity and results that your schedule permits.

  Thank you.

  RTA

• Problem with the listening Service: Long delay beginning listener, intermittent connections

  I have problems to connect to my Oracle database.  I don't know what was the cause, but now when I connect to a database that has been working well for the past two years, I usually get an ORA-12541 error.

  I run lsnrctl status on the server and get a prinout like this:

  Copyright (c) 1991, 2010, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=dqaswn02) (PORT = 1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  Windows 64-bit error: 61: unknown error
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  Windows 64-bit error: 2: no such file or directory

  I also tried to manually stop the service through services.msc, then by restarting via lsnrctl start, but when I do this I get a very long delay (10 + minutes) before he comes back with something like:

  TNS-01153: failed to process the string: 0i ≈ ♥
  

  I'm quite lost as to what is wrong.  I've been messing around with listener.ora, but I don't see anything difficult in there.  Here's a copy:

  listener.ora # Network Configuration file: E:\app\myc0714\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = E:\app\myc0714\product\11.2.0\dbhome_1)
  (= Extproc PROGRAM)
  (ENVS = "EXTPROC_DLLS=ONLY:E:\app\myc0714\product\11.2.0\dbhome_1\BIN\OraClr11.dll")
  )
  )

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = dqaswn02) (PORT = 1521))
  )
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  )

  # ADR_BASE_LISTENER = E:\app\myc0714
  LOG_FILE_LISTENER = LISTEN PORT
  TRACE_LEVEL_LISTENER = SUPPORT
  TRACE_FILE_LISTENER = LISTEN PORT

  A few times during that time, I was able to connect to the server, via sqlplus, however, it took 10 minutes before the connection is online.  Once I'm connected, I can ask my paintings as expected, but I need an application to connect.

  If anyone has any ideas on what could be the problem, please let me know.
  

  In fact, there was another thing, I changed when I finally got it works, although I don't know if it was related or not.  In my folder with my track logs, I had a huge (> 4 GB) listener.log file.  I deleted this file right before that I ran the command netsh command to reset and then restarted.  This file was also a bit special, because it had not been updated since around the time that I first encountered this problem.  It seems to be updated on a minute by minute basis, now that I've removed the old.  Is there a problem with this file becomes too big?  My drive was not out of space, but it is very curious that this stopped file update on the same day as when I started having the problem and now works properly again.  I wish I had noted the exact time until I deleted it.

  Link:

  Problem of Listener.log & #8211; large file | Obtained & #039; s Blog

• Adding media: camera not recognized

  I use a camera Canon Vixia series (HF?) and adding media to first elements 11. I start PE 11, then plug the camera telling me don't not to unplug the USB or power cord or switch modes. This far, please? I click Add media and select the camcorder HDV but EP 11 says that it cannot find the camera. Other camera options have the same result. Import of files and folders seemed to work but forced me to keep the camera connected to the PC all the time that I worked on the video. When I unplugged the camera, EP 11 said that the media has been disconnected. When I use Windows Explorer to copy and paste the files directly from the camera, I find myself with 2 files that need to be merged, I would avoid. I'm on a Windows XP Media Center Edition, Service Pack 3, with 4 GB of RAM. 11 PE has been downloaded in January 2013. I am relatively new to this and think that there is something I don't understand.

  You don't need Imagemixer import this video from the camcorder to your computer. In fact, you're better off using Premiere Elements, if you intend to edit with Premiere Elements.

  But or do I go into menu the camcorder while it is in playback mode and set it to port the cam drive or SD card on your computer. As I said, I have one just like it and that's what you need to do or no program will be able to get the video from the camcorder to your computer.

• First elements Timecode.cpp - 1014 error when adding media

  Software: First elements 11

  Camera: Sony DCR TRV22E

  OS: Windows 7

  When selecting Add multimedia elements, I get: [..-.. \Src\Timecode.cpp-1014] error several times, when the capture window finally arrives he says that the capture device is currently offline.

  This happens not only when the unit is plugged in and power but also when the camera is not connected.

  I tried different IEEE 1394 drivers available in windows 7 and none of them work.

  Host compatible OHCI 1394 controller

  Controller of compatible host OHCI 1394 (Legacy)

  VIA 1394 compatible OHCI Host Controller

  The connection to the camera via firewire is ok because I can download a video of him using Nero Essentials video, I can't do it through first elements 11.

  Post edited by: foradobeuse Oops, I put the incorrect error code in the title, it should be timecode.cpp - 1014

  I think I solved this problem.

  I have a number of external USB connected, for example, hard drives, webcams, mouse, keyboard etc., devices so I unplugged individual devices until I found that the Error 1014 is more appeared when adding media.  I plugged the other USB devices back in but kept the last disconnected device and can now add media from my miniDV via firewire.

  I don't think we can let off the hook here PE11, since I had no problems with USB so far and each capture freeware program that I tried did not have a video capture problem I had plugged in any USB device.

  Thanks to all who have contributed and I hope this helps other users faced with Error 1014, look at the number of points of view on this discussion after only a few days (~ 300) I don't think I was the only one.

• a long delay before video begins to play, remote only

  Hello

  My problem is that there is a long delay before that we can see the beginning of the video when connect us to the server from a long distance.

  When I connect from the same subnet, it's ok: less than 1 second.

  When I connect to a nearby location (2 km from here) the delay is 15 seconds

  When people connect to places very far away, it can be 2 minutes or sometimes the video does not play.

  y at - it a parameter to change this?

  Thanks for help.

  This Protocol is being negotiated in different places? RTMP, rtmpt, rtmpe, rtmps?

  I guess you have a proxy server or a firewall in place which prevents the default rtmp connection (using port 1935) put in place and the logical kicking of retry in and subsequently another protocol or port is finally working.

• How can I remove duplicate of Media Encoder Presets?

  I imported accidentally several presets for Apple ProRes. Now, I have versions in each version of ProRes double in Media Encoder.  How can I remove them?  The "delete" button (the minus sign) will not even turn on (it remains greyed out).

  Remove them manually in the folder Presets of the SOUL.

  What version of the SOUL and the operating system?

  where are stored the predefined settings in Adobe Media Encoder CS4? : Adobe After Effects

• SOUL CC 2014 cannot add some Presets HELP!

  I'm on a Mac OS 10.9.4

  I have a rotation beach ball whenever I try to add a preset. If I import a preset, it works temporarily.

  But the preset seems to disappear from the menu, replaced by a h264 with no information?

  If I try to delete the setting predefined, once again a rotation beach ball and I have to force to leave.

  First CC2014 see the imported preset.

  I deleted the prefs, reinstalled SOUL, pressed shift when launching and checked permissions.

  Any help would be greatly appreciated.

  Try going to Users/%username%/Documents/Adobe/Adobe Media encode/8.0 and delete the presets folder. Then restart SOUL. It's working now?