sound createjs works well in my pc, becomes white after Server download

Similar Questions

• My screen seems to have gone out.  Everything worked well then there black and white vertical lines on the screen.  Had to make a hard stop, bury ashes hold the power button. Now no display

  does that mean if my screen on m MBP15 inches starting to show black and white vertical lines and will not again after that I tried to restart my computer?

  This looks like a bad graphics card. What happens if you hold a flashlight on the screen, you see the desktop or not?

• Windows becomes white after the start

  I have windows vista. When comp. after windows startup, it takes about 2 min. then scren goes white with arrow always on the screen. If I pull up the Task Manager, it rises and I can do a few things, but not much. System Restore does not and if I try safe mode it just stops about 1 min after the start.

  Explorer

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

   

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

  You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

  If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).

   

  Close the browser and start a command prompt

  • Close Windows Explorer
  • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete then Task Manager.
  • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.

  Then to restart the Explorer after trying all of the following

  • Press Ctrl + Alt + Delete and choose Task Manager
  • In the Task Manager, click the file menu and then click new task (run) and enter explorer

   

  If you cannot start the Explorer at all

  • Press Ctrl + Alt + Delete and choose Task Manager
  • Under the processes tab, click Show processes from all users to elevate to administrator
  • In the Task Manager, click the file menu and then click new task (run) and type cmd
  • Other things you can try typing
    

    Explorer
    Explorer c:\
    Explorer/e, c:\
    wercon
    control
    Iexplore
    Rstrui

  If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.

   

  Reregister the shell registry entries

  It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  regsvr32 /i shell32
  regsvr32 /i urlmon.dll
  regsvr32 RPCRT4.dll
  regsvr32 PROPSYS.dll
  regsvr32 MSCTF.dll
  regsvr32 cscui.dll
  regsvr32 rsaenh.dll
  regsvr32 timedate.cpl
  regsvr32 ATL DLL
  regsvr32 OLEACC.dll
  regsvr32 actxprxy.dll
  regsvr32 USERENV.dll
  regsvr32 msshsq.dll
  regsvr32 NaturalLanguage6.dll
  regsvr32 thumbcache.dll
  regsvr32 WINTRUST.dll
  regsvr32 MMDevAPI.DLL
  regsvr32 audioses.dll
  regsvr32 audioeng.dll
  regsvr32 ExplorerFrame.dll
  regsvr32 msi.dll
  regsvr32 FirewallAPI.dll
  regsvr32 netshell.dll
  regsvr32 pnidui.dll
  regsvr32 QUtil.dll
  regsvr32 c:\windows\system32\wpdshserviceobj.dll
  regsvr32 WINHTTP.dll
  regsvr32 C:\windows\system32\qagent.dll
  regsvr32 C:\windows\system32\portabledeviceapi.dll
  regsvr32 wbemprox.dll
  regsvr32 wbemsvc.dll

  
  regsvr32 fastprox.dll
  regsvr32 imapi2.dll
  regsvr32 wshext.dll
  regsvr32 gameux.dll
  regsvr32 msxml6.dll
  regsvr32 vbscript.dll
  regsvr32 jscript.dll
  regsvr32 wshext.dll
  regsvr32 wshom.ocx
  regsvr32 wshcon.dll
  regsvr32 scrrun.dll
   

  Delete the folder and the settings of the Menu

  This will remove the settings are saved for each file that you visit. Also the order of the start menu.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f

  Delete the thumbnail and icon Caches

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  attrib - r s h '% userprofile%\AppData\Local\*.db '.

  del "% userprofile%\AppData\Local\*.db".

  Disable thumbnails and previews

  Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.

  If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.

  Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.

  If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f

  Turn around after testing the Explorer.

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f

   

  A boot is a way to explore

  It can be caused by a shell extension.

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

  The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

  • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
  • Close Windows Explorer
  • Start Autoruns by right-clicking and choose run as administrator
  • Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
  • Go to the Explorer tab and uncheck everything to the left.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete and choose Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
  • Click the file menu and then click new task (run) and enter explorer

  If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see problems explore

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  Recycle Bin
   
  If the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   

  RD C:\$RECYCLE. BIN/s/q

   
  then repeat for each drive to change the drive letter, for example
   

  d:\$recycle Rd. BIN/s/q

   

  e:\$recycle Rd. BIN/s/q

   
   
  If the Office does not start
   
  This will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   

  MD "% userprofile%\DesktopTest".

   

  Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /f

   

  MD "% public%\desktopTest".

   

  Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t f

   
  To restore default after having tested if begins to explore.
   

  Set ExpFix1 = % user

   

  Set ExpFix2 = % profile

   

  reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f

   

  Set ExpFix1 = % Pub

   

  Set ExpFix2 = % lic

   

  reg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f

   
  You will need to disconnect then.
   
   

  New entry missing folder

   

  If the above does not help.

   

  Download NewFolder.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121.

   

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the NewFolder.reg.

    

• I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? suggestion pls

  I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? Someone had this problem? Suggestions please...

  nidgp wrote:

  I left about 80 days of warranty. I'd give to repair?

  Absolutely, examined her!  There is some kind of hardware problem.

  Ciao.

• Satellite M50-130: no sound from speakers but helmet works well

  Hello

  I have a laptop Toshiba Satellite with Harmon/Kardon speakers, using the Realtek AC97 Audio sound card. For some reason there is no sound coming out of laptop speakers, but when I connect earphones I get the sound perfectly fine, if clearly is not a volume control number. Device Manager indicates that the sound card works fine.

  I tried the system restore, and it does not work. Can someone help me please?

  Thank you! :)

  What s the name of the laptop?

  Looks a bit like a problem with the speakers for laptop
  The graphics card and the audio driver works very well if the sound is coming through the headphones.

  In this case, the technician should be contacted because everything looks like a hardware problem.

  Good luck

• Satellite L70 - no sound from speakers but headphones work well

  Hello

  I have a sound problem with my computer (satellite 70 L)
  I tried everything but nothing to do, no audio output, but plugging the headphones into the audio port reinstall his works well, so I uninstall Conexant, even for its dts but its still doesn't work does not,

  Thank you

  In my view, the symptoms of laptop are clear enough: he does not resemble his driver or system problem because the sound seems to use the headset.

  I think that the internal speakers are defective. It seems strange to me that the two speakers have begun to malfunction at the same time, but this problem may occur.

  But before you contact the authorized Toshiba maintainer to fix, I would recommend you to recover the laptop just to be sure that this problem is not related to the failure of the system/software to 100%.

• The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

  Original title: the headphone volume

  How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

  Hello
   
  1. who is the operating system installed on the computer?
  2. What is the brand and model of headphones?
  3A this works much earlier?
  4. What is the brand and model of the sound card?
  5. have you ever tried to play the Audio using different media player applications and check?
  6. have you tried to connect the headset to another computer or phone and check if it works well?
   
  I suggest you follow these methods and check.
  Method 1: Run the audio troubleshooter.
  Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience store
   
  Method 2: Set the earpiece/microphone as default device and check.
   
  a. right click on the volume icon in the system tray at the right corner on the desktop.
  b. Select the playback device, go to torecording tab.
  c. make a right click and headphone/microphone as the default device.
  d. click on apply and ok.
   
  If above steps fails, proceed to method 3.
   
  Method 3: I suggest to disable the improvements and check.
   
  a. right-click on the icon "speaker" at the bottom right of the screen.
  b. Select "playback devices".
  c. right-click on the helmet.
  d. Select Properties
  e. click improvements
  f. check Disable all improvements
  g. click OK
   
  You can read this article for more information:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems  
  
  You can also contact the manufacturer of headphones and check.
   
  I hope this helps!

• No sound in windows 7 32-bit, where previously it worked well

  No sound is heard in windows 7 32-bit, where previously it worked well. Sound card not added in the setuo on windows 7 on vmware, where it works well on the mac mini, even now. Please suggest measures to solve the problem.

  Thank you

  His record game

  Hello

  I suggest you to see these steps and check your sound card in the hidden devices.

  a. click on start.

  b. type cmd in the box search and run this program as an administrator.

  c. at a command prompt, type the following command and press ENTER:

  Set devmgr_show_nonpresent_devices = 1

  d. type follows a command prompt and press on ENTRY:

  Start devmgmt.msc

  e. troubleshoot the devices and drivers in Device Manager.

  NOTE: click Show hidden devices on the view menu in Device Manager before you can see devices that are not connected to the computer.

  f. When you are finished troubleshooting, close Device Manager.

  g. Type exit at the command prompt.

  Note that when you close the command prompt window, window clears the devmgr_show_nonpresent_devices = 1 variable that you set in step 2 and prevents the ghosts of devices is displayed when you click Show hidden devices.

• Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  He broke. Make an appointment at the genius bar and get it fixed / replaced. There is no magic words that will do well.

• Satellite A60 - sound stopped working

  Satellite A60 - sound stopped working. Download driver toshiba web site - click on the sound icon's new sound update and it worked, but disappeared whenever I restarted.

  Clicked the icon of installshield and starts to install, but then an error message saying 0 x 80040303, unknown error, the Setup program ends - this happens every time.

  Tried to download any other updates, but he says that I register my cell phone, I'm sure I did and doesn't let me do once again because it is more than 6 months.

  Help!

  Hello

  Try to restore the operating system to an earlier time when everything works well. On this path, it is not easy to say why this is happening. Try also to remove sound card since the Device Manager, and then restart the device.

  All the drivers for your device, you can find on Toshiba download page under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• On the Satellite P500 microphone does not work well

  I spent $2,000 to buy this Satellite P500 a month ago and soon found that the microphone does not work well. I used the web camera application to record a video to test, the volume level is very low that you barely hear it and it cracks.

  I called the support center, waited for half an hour and finally had someone to talk to me, I followed his instructions adjusted the level of the microphone to 100 and the boost to 0.
  The cracking sound disappeared, but the level of volume is still too low to hear. What can I do?
  Call again and wait half an hour? His Friday 17:00, they will be upset and I'm already mad!

  Hello

  Have you tried to test mic with Skype or a similar application. Friend of mine has Satellite P500-127 and he use it for Skype communication.
  I can hear it fine and everything works fine.

  Do you still have the factory settings (original operating system preinstalled)?

• ENVY TouchSmart m7 laptop: mute botton light turns on my laptop. MUTE button works well.

  Seeing bright button MUTE (red) on the keyboard lights up when I press it. The function itself works well. light just doesn't show.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  When the reinstallation of Chipset is finished, stop the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• sound only works on some programs

  sound only works on some programs able to get on wmv, audio mp3, all sound tests but still unable to hear any sound on all links. The problem started when the sound volume icon disappeared from the taskbar, also the expander to the taskbar control disappeared at the same time. Place the volume in the taskbar icon is enabled, the icon is still missing from the taskbar. In Manager devices under IDE ATA/ATAPI controllers, that I had 2 primary and 2 secondary channels, try updating the drivers 1 primary and 1 secondary driver do not have be updated because they were later. Other primary and secondary drivers have been updated and listed as primary channel VIA ATE & secondary channel VIA ATE. Both these have an error this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Tried to uninstall & reinstall nothing doesn't. Can anyone help thank you FOR

  Well, punctuation, capitalization, and enablers would help make your readable phost!

  Do you mean that you have no web sounds? If so, make sure "Play web pages" or similar is verified in any browser you use.
  What did you win by dating the ATA drivers?
  You must identify your audio driver and the update.
  Go to the website of your computer manufacturer and obtain the correct drivers from there. If you PC, then go to the MB manufacturers website and get the drivers from there.
  Code 31: you managed to corrupt your audio drivers. Do as above.
  See you soon,.
  Jerry

• Internet worked well until I have Reinstalled windows vista 64 bit, now my Internet does not work, says that I don't have a driver from the Internet.

  Internet worked well until I reinstalled windows vista 64 bit on my Dell laptop, now my Internet does not work. Went into Device Manager and there is no network adapter. I tried to reinstall the driver that came with my laptop disk but it doesn't seem to work, says that I need an updated driver. I don't know what else to do, I have to install a new driver from the Internet? Ugh becomes very frustrated!

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Hi, FCP my, library, was damaged, i, open, drank of the PCF, library and, he, worked, well, then, my, question is, which, do, with, the, old, library,?, is, again, I, working, throughout, with, the, a, used?, or, should, I, open, Abu, one, i used, each, t

  Hi, my, library, has been damaged, so I have, open, a, FCP BU library and this worked well, so my, question, is, what, do, with, the, old, library,?, is, always, workin g throughout, with, a, I have used?, or, well, I have, open, BU, one, i, used, each, times, I, open, my, project?

  Rename your backup library in order to take account of the original, and then delete the original.

  FYI: Identification will facilitate a slightly different name.

  Al