Sound for a reading assignment works on main computer account, but not on a child account error

Similar Questions

• Why build application vi works in the development environment, but not in the executable file; error 1025

  Hello

  I have a request ('A') that I am trying to build another application ("BuildA").

  I can create a request for A manually of its project using the Build specification, and it works fine (A.exe).

  Also, when I run BuildA.vi in the development environment he calls the "Build.vi" properly and again generates application A.exe very well.

  Then, when I ask BuildA (manually) and run BuildA.exe, I would expect that it also creates A.exe as BuildA.vi did in the development environment.

  However, it fails with the error:

  Code: 1025

  Reference VI opened in .vi NI_App_Builder_API.lvlib:Build (path)-> BuildA.vi
  Path of the VI: C:\TEMP\AppBuild\BuildA\vi.lib\AppBuilder\BuildTarget.vi

  I noticed this thread , which looks like a similar problem, but has reached no conclusion.

  Why BuildA.vi works fine in the LabVIEW environment, but the application that builda.exe does not work?  All paths are hard-coded, so it shouldn't be a path problem.

  Thank you

  -john

  eye_in_the_sky wrote:

  I guess we will have to keep the application building separated the disappointment... automated scripts

  There are still other options.  Lets say configure you VI to run then.  If you ran the following command from your script line

  "C:\Program NIUninstaller Instruments\LabVIEW 2011\LabVIEW.exe" "C:\BuildA.vi".

  It would then open your BuildA.vi in LabVIEW and run in the development environment.

• USB works in XP safe mode but not in "normal" mode.

  Hello

  Something has trashed my usb connection because none of them work.  They worked a few days ago, but not now.  The USB ports work fine in XP safe mode, but I can't make them work under XP 'normal '.

  I tried system restore to restore to when I know they worked (Saturday).  But the restoration said it cannot restore at this time there.  I drive four other date back (Thu, Fri, Thur, sea) and it woul don't restore of any of them.

  I went to the HP web page for this computer.  They have no USB drivers, so I download the chipset and installed driver.  It does not work.

  I tried to uninstall USB devices by using Device Manager.  Devide manager uninstalled, then I rebooted the machine and it reloaded automatically usb drivers.  But I can not use devices.

  I tried Device Manager-> select your hardware-> right click-> properties-> tab driver-> update driver-> online search for the driver.

  I tried to uninstall in safe mode, run usb.inf and then re-startup - which did not work.

  I am current internet search for USB drivers for this computer.  But I still found nothing.

  Anyone know where I can find USB drivers for the HP Pavilion a1515n or should I be looking for on google.  Currently, I'm looking Drivers USB a1514n.

  I would like to reinstall the USB drives, but I can't find them.  Or some otherway to get USB devices working again.

  Thanks for any help.

  Dennis

  All,

  I got it to work!

  I have not updated the driver for the USB hub.   However, I finally tried to update the driver for the USB EHCI controller.  Once I updated the driver for it, all the USB ports and the connected devices are recognized.

  Life is good again.   It took me 5 hours to understand that I had to update a different device driver, but hey - at least it works!

  Denni

• Security for Windows XP Service Pack 3 (KB973540) update, downloaded, but it refuses to install - no error code given... I am running SP3... any suggestions

  Security for Windows XP Service Pack 3 (KB973540) update, downloaded, but it refuses to install - no error code given... I am running SP3... any suggestions

  Well, this update is mainly for Windows Media Player.

  You have WMP installed and what version.
  For more information go here.
  http://support.Microsoft.com/?kbid=973540

• I tried to reset my password computer laptop but the laptop telling me an error occurred while the wizard attempted to set the password for this user account how can I fix this pleas

  I tried to reset my password computer laptop but the laptop telling me an error occurred while the wizard attempted to set the password for this user account, how can I fix this means if someone knows how to fix teas pleas answer me quickly I have to work

  Logging in as an admin account, then reset the password for the account of the problem.

• LifeCam HD-5000 works fine in other programs, but not in the Lifecam software accompanying

  My Lifecam HD-5000 works fine in other programs, but not in the Lifecam software that comes with it, I get "There is no camera connected to this computer." I tried to restart and uninstall then reinstall the software.

  Hello

  LifeCam HD-5000 - Support and warranty (3 years)
  http://www.Microsoft.com/hardware/en-us/p/LifeCam-HD-5000/7ND-00001#support

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  Support for WebCam
  http://www.Microsoft.com/hardware/digitalcommunication/support/default.mspx
  http://www.Microsoft.com/hardware/en-us/support

  Product Solution Center
  http://support.Microsoft.com/hardware

  MS material takes in charge and recourse in warranty (90 days support of)
  the date of the 1st call).

  1-800-936-5700 or 1-800 Microsoft (642-7676)

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My DVD works on our television screens, but not on some of our friends in televisions

  My DVD works on our television screens, but not on some of our friends television screens.
  He plays a photo then restarts and then plays two photos then restarts then plays three photos then restart etc etc..
  What is a parameter when creating the video to digital photos or a parameter on television of our friends?

  It has nothing to do with the connected TV!
  It s is the DVD drive!

  Some players can't handle all CD or DVD! Which is one reason why the created image DVD does not work with the friend (s) disk drive.

  You will need to test various DVDs of different drive manufacturers. Some discs are more compatible as other drives

• DVD burn with iDVD works on new DVD players, but not on older versions of the DVD player. Any suggestions?

  VDs that I burn with iDVD works on new DVD players, but not on older versions of the DVD player. Any suggestions?

  I'm using an iMac with OS X El Capitan 10:11.1 and iDVD 7.1.2.

  You use DVD + R disks?  Those who are not compatible with DVD players before 1997.  The DVD-R is compatible with all DVD players.

  

• I have Photoshop CS6.  I recently bought a Nikon D750.  I can't understand how to upgrade my version to read raw files.  I'm not computer illiterate, but not a COMPUTER genius either.  I have a pc with windows 7.

  I have Photoshop CS6.  I recently bought a Nikon D750.  I can't understand how to upgrade my version to read raw files.  I'm not computer illiterate, but not a COMPUTER genius either.  I have a pc with windows 7.

  Have you updated Camera Raw to 8.7?

  Camera Raw plugin | Supported devices

  Plugin Raw camera setup

• Question about media queires working in FF, and CR, but not IE

  Hello

  I'm trying to understand why my meïdia queries work in FF and Chrome, but not Internet EX 11.

  The page here: http://skeeterz71.com/auto/dealers.html

  The form at the top of the page, the pictures and information must be centered on the page to these: If someone has the time to watch, I would appreciate it.

  @media (max-width: 775px) {}
  .bold-product-title {}
  text-align: center;
  }
  .product-image-left {}
  text-align: center;
  }
  {.dealer-title
  text-align: center;
  }
  {.dealer-location
  text-align: center;
  }
  {.dealer-phone
  text-align: center;
  }
  {.dealer-information
  text-align: center;
  }
  {*.search city
  text-align: center;
  }
  . Search-of-city-select {}
  text-align: center;
  }
  }

  Thank you

  P.S. I use Bootstrap, but don't know of a bs class that will focus in Tablet and phone discovers only.

  Too bad. Don't have a closing tag on the right to request above this one... I went on the css so many times trying to find the problem and do not see it until about the 10th time. Probably should call it a day.

  I noticed in the element inspect it is to say, he doesn't yet see the request of media at all. Which clued me and should have been my first thing I should in fact...

  FF and chrome seen the request and IE is not. Strange, but IE was right in this case. FF and chrome gave me a lot of slack :)

• Cannot get my SD card reader to work on my computer. Desktop computer.

  Work does'nt drive SD card, no error message.

  Hello

  If you can not get the card reader to work, it can be replaced and/or an external card reader is not expensive.

  They go bad sometimes. Try these:

  / Settings (BIOS/CMOS) often F2 when you start then look at the screen - make sure that the USB port is enabled.

  ------------------------------------------------------------------------------------------------

  Control Panel - device - hard drives - SD card Manager or similar - double click - Driver tab - click on update drivers (this will likely do nothing that MS is far behind the certification of drivers) then right clicked UNINSTALL.

  Now get to the USB controllers - right click - UNINSTALL everything in the category at the moment, EXCEPT the category itself - REBOOT. This will refresh the USB driver stack.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all USB devices that you previously used. Run Options and check the 1st three choices to see if one is there. You can remove all instances of the drive and restart again.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  Start - type in search box - Windows disk - find Windows Disk Management on the list at the top - right click - RUN AS ADMIN search to see if there is a drive letter assigned or a conflict.

  Check with the manufacturer of your system for the updated drivers - some card readers to do not use the windows drivers.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Why Apple ID work for the devices iOS and Yosemite... .but not for iCloud?

  Recently, I upgraded to Yosemite. So I was forced to change my PWD for Apple ID.  I have AN AppleID account. After having changed the PWD, other requested change upgrade iOS devices, and all the work.

  UNLESS iCloud refuses to accept my new Apple ID... All other devices, updates work fine with the new PWD AppleID...

  What is the problem with iCloud?

  How can I force it to accept the Apple that accept all other devices/systems ID?

  Jim B

  Have you tried the signature to iCloud and then again?

  What to do after changing Apple ID or password - email address

• LR Photo import from the camera all of a sudden does not (5.7.1) - says "some import operations were imported not because they could not be read."  Work on another computer and the version on the same computer but not newly LR 4.3 installed LR 5.7.1 cm³ 2

  As above, all of a sudden, on a single computer I can not download from the Canon 50 d or 70 D in LR 5.7.1.  It will download on another computer, as well as on this computer in an older version of LR (4.3).  As soon as I put on the computer this morning, I also got an error message that "the catalog named Lightroom ' catalogue Lightroom 5" cannot open another application already opened it. "It's a cold start, so I'm not sure what's going on.

  "Could not be read" means that you do not have a WRITE permission in the destination directory, then change your permissions.

  "Another application already has its opening" can be solved by removing the .lock file in the same folder as your catalog file.

• FancyBox - Working in Live View mode, but not in the preview

  Hello!

  I searched the forums for some answers, but I can't just understand what I am doing wrong. I'm really a beginner with Dreamweaver and coding, so I think I'm just something wrong. I hope that someone will be able to point me in the right direction! Anyway, here's my problem...

  I could not get the Fancybox to work properly. When I test my page through Live View, it seems to work very well. However, Fancybox does not work as expected when I test through various browsers in preview. Instead of bring the image in a Fancybox object, it transfers me to a page that contains only the image. I've read several posts that have raised the same issue, but I can't simply solve this problem on my own.

  In order to understand this point, I created a simple test page that contains only the content of my Fancybox and a single image. I'll list the code below:

  <! doctype html >

  < html >

  < head >

  < meta charset = "UTF-8" >

  < title > FancyBox Test < /title >

  <! - load jquery - >

  " < script type =" text/javascript"src =" http://code.jQuery.com/jQuery-latest.min.js "> < / script > .

  <!--> fb style sheet

  "< link rel ="stylesheet"href="/fancybox/source/jquery.fancybox.css "type =" text/css"media ="screen"/ >

  <!-pack jquery fb->

  "< script type =" text/javascript"src="/fancybox/source/jquery.fancybox.pack.js "> < / script >

  < / head >

  < body >

  < a class = "fancybox" rel = "group1" href = "images/Illustration_1.png" > < img src = "images/Illustration_1.png" width = "620" class = "fancybox image" height = "662" / > < / a > "

  < script type = "text/javascript" >

  {$(document) .ready (function ()}

  $(".fancybox").fancybox ();

  });

  < /script >

  < / body >

  < / html >

  I kept all the Fancybox files in a folder called 'fancybox' in my root directory. I know that I do not need to place the image in a group, since I don't currently have more than one image, but finally, I would like to have multiple images, so I went ahead and assigned to a group. I added the class 'fancybox-image' to the image so that I was messing around and it seemed to make it work inside of Live View, but I does nothing for me when I use an excerpt.

  I tested in several browsers, but I tend to use Firefox to test the most. Using the Firefox web developer tools, I found some fundamental questions. The Console gives me the following error: "TypeError: $(...).» FancyBox is not a function"and the Style Editor told me that the style sheet can be loaded. I thought this might give me enough information to solve this problem on my own, but I'm obviously missing something here. Any help would be greatly appreciated!

  Is your folder fancybox on the same level of your images folder directory in your site definition?

  If so, just get rid of the bar oblique leader in your links to the fancybox scripts.

• PALM TX will turn on and work with power cable plugged but not when disconnected?

  Hello all-

  I have a PALM TX, who bought in 2005. It worked fine but I changed my position and my last job stop supporting. That being said, I can use now and have recently it turned on and loaded schedule, etc. However, it does work when I plugged in the power cord. It works very well with the connection, no problems. That said, once disconnected from the power source it not light?

  I finished the soft reset several times. With reconnected to the power cord it works fine. However, it still not work with the power cord?

  I was reading online in various forums and it seems like it might be my power button?

  Does anyone else have this problem?

  Any ideas or help would be greatly appreciated that now I can use and really want to use it to its full capacity.

  Thank you!

  Joe

  The connections of welding of switch on the motherboard have been a little weak on the TX line.

  It seems to me that the battery is dead.  The TX can also turn on by pressing the front buttons.  Try to press one of them and see if it lights.

  There are several online sites for repair and PDA batteries.  TX peut battery be user servicable, although it is a little intimidating for a novice.  If you Google 'Palm TX battery replacement', many hits will occur as well as how to videos!

  WyreNut