Sound is not produced after the installation of Windows 8.

Similar Questions

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Satellite L555 - 10K - FN keys do not work after the installation of Windows 10

  I installed 10 64-bit Windows (original was Windows 7 64-Bit)

  My FN keys do not work after the installation of Windows 10.

  There is no possibility of a screen-Switch, and the brightness setting and activate Touchpad...
  Do you know any help

  Hello

  I think that your model of laptop is not possible to Win10.
  Check it please https://forum.toshiba.eu/showthread...mation-website

• My CC of LR 2015 stops right, "do not answer", after the installation of windows 10. What should I do?

  My CC of LR 2015 stops right, "do not answer", after the installation of windows 10. What should I do?

  This means that a problem with the graphics card.

  You update your graphics card drivers?

• Satellite U200 - sound does not work after the installation of Win8.1

  Hello guys,.

  I have some old Satellite U200-165. I installed windows 8.1 Enterprise assessment successfully after that I changed the hard drive SSD, but the sound does not work. Windows showing that his work perfectly, but it does not come out.

  An advise please.

  Satellite U200 is a pretty old and not supported for Win8 or Win8.1 machine. I think that we have no report on this forum how this old piece of equipment works with Win8.

  If the sound card is properly installed, have you checked all the sound settings?
  I presume that the same problem is with a headset, right?

• Bluetooth doesn't work does not correctly after the installation of Windows Vista Home Premium Service Pack 2 (SP2) on Dell laptop

  I searched this forum and almost all resources on the net for days now nothing works.  Give the message to a thread more appropriate that I couldn't find one that is truly representative and am a newb at this.

  Summary of the problem: Bluetooth connectivity does not work properly after the window Vista Home Premium Service Pack 1 and 2 installation (SP 1 and 2).

  My system:

  Laptop Dell Inspiron E1705, 32-bit Winows Vista Home Premium SP2, Dell Wireless Bluetooth 355 Module + EDR 2.0

  * My system was purchased in 2006 with Windows XP, but was not entitled to a free Windows Vista Home Premium Upgrade I did. I installed Windows Service Pack 1 and 2 about a week ago.

  Problem: After downloading and installing the Windows Vista Home Premium Service Pack 1 and 2 (SP 1 and 2), my system does not recognize my Bluetooth (a touch of Sprint also) device known as the HTC Vogue.  I stress that I have not had any problems with this device before downloads.  I can't revert to the pre - SP State 1 and 2 because my system restore does not have these points more.

  I have read several posts on various sites about people having similar problems with Bluetooth connectivity after the Vista SP 1 and 2 facilities.  The problem is obviously the need for an updated driver.  I went to the site to download driver Dell and the Blueooth only updates available are the following. (Note: these drivers all date from 2006 and 2007).

  http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=RC956904&l=en&s=pub&SystemID=INS_PNT_P4_9400&os=WLH&osl=en&servicetag=&catid=-1&impid=-1&deviceid=12084&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&releaseid=R159805&formatcnt=1&vercnt=1

  I had these installed before the SP 1 and 2 have been installed and they worked very well. After the upgrade, these drivers do not work.  They won't recognise BT devices.  I tried to upgrade the drivers by using update Broadcom suggested below it, but an error of following installation to contact Dell.

  http://www.Broadcom.com/support/Bluetooth/update.php

  I contacted Dell via e-mail and on the phone, but they want to charge me $60 for a one time service call just to talk about the problem because my warranty has expired. Provide updated drivers is not a problem of security in my opinion.  Even after explaining the situation, their continuous support to just send me the link to download Driver Dell above with out-of-date drivers.  I guess that's what they are charged to do, they do not have to admit a problem of compatibility.  This obviously the same link they would charge $60 to send.  I explained that I need just a Bluetooth Driver from Dell to at least version 6.3.   Needless to say, I will never buy another Dell product.

  On my end, I tried to uninstall my current drivers and then by installing a newer driver to support Gateway (Version 6.2.1.500 for and Acer).  This allows me to install some parts of this update and the update Broadcom. However, it is not a perfect installation and expires after about 90% saying "this update is not for this system" because it is the gateway not Dell to be provided.  Displays the version of the driver on my computer is Version 6.3.5.430 after doing this, but it is not a complete installation and some features are not available.

  Does anyone have experience with this issue? I would like to have a link with some bluetooth drivers generic Version 6.3 type which will allow me to use the Broadcom link to upgrade to the last version that works with Vista SP 1 and 2.

  Thank you for your help.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 is not genuine, after the installation of windows 8 in dual boot.

  When I want to upgrade to windows 8, Windows 7, I think I should try windows 8.

  So, I installed windows 8 with dual boot.

  But after the successful Windows installation 8, when I started my laptop with windows 7 OS, it shows that the copy of windows is not genuine.

  What should I do?

  How can I get my windows 7 back as it was?

  Please help me... :'(

  Download and run the Microsoft Genuine Advantage Diagnostic Tool:
  Download the tool: http://go.microsoft.com/fwlink/?linkid=56062
  Post your results (copy button) and paste the results in your answer.

  As a starting point, the first thing you should check is the section to three figures on the number of product ID, if it corresponds or is included in one or two digits of the examples below, you have probably a MSDN or TechNet product key. "These keys must not be sold for retail use.

  065 066 067, 068, 069 to Ultimate, box 220 for professional and 230, 231, 232 area for Home Premium,

  There are probably others, but they should be close to those that are displayed"
  (How to be certain - download the Microsoft Genuine Advantage Diagnostic Tool listed above).

  Note: Though that illegally sold MSDN/TechNet allow product key for activation of more than one
  (usually 5 or 10), so these keys can be sold "several times" before activation may fail.

  J W Stuart: http://www.pagestart.com

• Computer will not start after the installation of Windows Vista SP2

  
  After downloding and installing Windows Vista SP2 on ACER laptop for my daughter, I can no longer start the computer.  Initially registered startup C:\\Windows\System32\drivers\ecache.sys as corrupt file repair.  Change BIOS to boot first from the optical drive and the departure of computer with Vista DVD in the drive, I accepted the option repair.  No chance that the machine always fails to start and always displays the window "Statup repair."  Auto repair is always unsuccessful.  Repair suggestions will be appreciated.  Thank you.  Bob G.

  Support Microsoft still offers a FREE support for Vista SP2.  Go to: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1 where they will help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Latitude E5510 not start after the installation of Windows 7 64 bit

  Hey all,.

  Recently, I tried to install Windows 7 on my brother's cell phone to try to update to Vista. The installation went well, but when he tries to restart for the first time, the screen remains empty without having to start. I tried to format the drive and try again and still nothing.

  No idea what it could be?

  Silas

  Hi Silas,

  My apologies for the late reply.

  You can check the SATA operations in the system BIOS. Move operations SATA AHCI to ATA or vice versa, as shown in the image below:

  

  Also be sure to remove all external devices connected to your computer and remove the SD card in it if connected.

  See if it makes a difference.

• Sound does not work after the installation of beats audio

  Laptop: HP DV6-7001TU

  OS: Windows 7 Home Premium (the laptop came with HomeBasic, I got a copy of used HomePremium).

  I came across this problem recently which was not there before, I bought the computer as soon as I bought almost 5 months ago, I did a format complete and installed Windows 7 Home Premium (hate the bloatware that comes + it came with HomeBasic).

  Audio worked fine uptill now, my brother got a new laptop DV6 with beats the other day, and the sound was better than what I had. So I thought it was the default sound drivers I had. I went there and am myself the audio drivers. Now, since I update the drivers, I have no sound on my speakers if I use not his for a long time, if I restart the noise comes back, but if I do not use anything his bound for awhile and then try to use it again, it disappears.

  The solution that I found (to restart the computer every time), is that if I click on the vloume icon in the taskbar and then click on the speaker icon that opens "speakers and headphones properties" and then click OK in the window that opens, the sound comes back.

  Things I've tried so far

  1. Once I have no sound, again, I tried the windows "Find and fix audio playback problems", he found nothing.
  2. I have uninstalled/cancelled codec IDT of the Manager of the devices, the drivers were responsible for default and the sound was back, once I did a Windows reboot find the IDT drivers and the problem was back.
  3. I have uninstalled/cancelled drivers IDT, uninstalled the software programs IDT add & delete, downloaded a new copy from the link above and installed again, same problem.

  Help, please! It drives me crazy, I get a lot of Skype calls during my work hours and I have to constantly to cling on my clients and that the correction of the sound and to recall them once again, this is highly inconvient.

  Software IDT uninstalled, deleted/rolledback the pilot programs, downloaded the HP Support Assistant and recommended IDT software, installed via HP Support Assistant. Everything works fine now.

• Gateway 7330gz does not start after the installation of Windows XP SP2

  Gateway 7330gz had a hard drive failure, so installed new hard drive (160 GB drive), file a copy of XP Pro, starts without a problem, pulled down to XP SP2, saved on hard drive, run SP2, and it installs without warning and restarts.

  Then goes into loop.  Download the gateway splash screen, The Win XP logo comes up and the progress bar is on 2-3 loops - gateway splash screen, repeat... If I F8 for boot menu selections, I can do a safeboot with networking.

  I reformatted and reinstalled XP added once again, all the appropriate drivers I can find to remove yellow? in the Manager list of device without change.

  There are only XP Pro on the machine when I start - absolutely no other software package has been installed, no external devices are connected.

  My plan was to drop XP Pro, SP2, and SP3, (updated IE along the way) and add MS Security Essentials. Then pick up all the other patches since SP3 before you add any other software.

  Thoughts on why the boot failure after installation of SP2?

  Solution found

  In BIOS advanced together to the top was an option called INTEL speed step

  Disabled the option and restarted in SP2 with no problems.

  Adding SP3, MS Security Essentials with no other problems...

• Product key does not work after the installation of Windows XP Media Center

  I lost my CD of Media Center and borrowed a friends to re - install.  I have the product key from the back of my machine.  This machine was built by me, so I have the retail version of MCE.  Any help would be greatly appreciated.

  Thank you
  Dave

  MAYBE...

  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246

  You MAY be able to get a CD from there.

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• Satellite L655 touchpad button ON / OFF does not work after the installation of VAP

  Why the Start button / stop the touch pad does not work after the installation of vap?

  May I ask what system and what PPV version do you have installed?

  I assume you mean on the Fn + F9 key combination...
  Is this right?

  Another FN button work as shouldy?

• Audio does not work after the installation of Vista on Satellite Pro a series?

  Done a format and a new facility with vista ultimate and can't get the audio from realtek to work.
  The drivers install properly but don't have still no sound.

  Download realtek 97 and drivers HD, but still no luck.

  I had this problem some time and fixed it but I can't find where I found the solution of :(

  Any help would be great, thanks!

  Hello

  First if all would be very useful to know which model of laptop you have.
  Second, you could find the driver of his right on the page of Toshiba and so you n t need to test several audio drivers! The one on the Toshiba driver site works for sure.

  I read about a similar problem on Vista OS and these Toshiba document should help you:
  [Audio cut off (no sound) after the installation of Windows Vista: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1886 758xml & sliceId = & dialogid = 54568603 & stateId = 0 0 51373343]

  Check it out!