Sound of water drop annoying Vista

Similar Questions

• Watch free downloads for patterns of sounds and themes for Windows Vista.

  Original title: watch free downloads for windows vista 32 bit...

  looking for sound patterns and themes... * address email is removed from the privacy *

  Hi Valerie,

  Since you want more patterns of sounds and themes, we can refer to the links and check if that helps.

  Themes and templates of built-in sounds are available for Windows Vista.

  Desktop themes

  Change the sounds of the computer

  For more information, see the article:

  Change desktop theme

  However, you can also use your favorite search engine to find free downloads of third party for the patterns of sounds and themes.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• No sound via HDMI after upgrading Vista to Windows 7

  Data sheet:

  HP Pavilion Elite m9515y

  Sound:

  Realtek ALC 888 chipset s

  Video:

  GeForce 9600 GS

  With the original operating system Vista, I could right-click on the speaker in the taskbar and select the playback device and make the default output HDMI.  I erased my drive and installed Windows 7.  Now under the playback devices I have not the HDMI option.  According to me, speakers, headphones and Realtek Digital Output.  Sounds works fine with speakers or headphones.  I tried to install the latest audio and video of Nvidia and Realtek drivers.  I tried to go back to the original Vista drivers.  Nothing works.  At the moment I use a stereo cable to connect my PC from the headphone jack on my TV, but wish that I could get good audio HDMI works with Windows 7.  Anyone else having a problem with these chips sets?

  PROBLEM SOLVED!

  The motherboard has two S/PDIF outputs.  A pass by a connector and the wire internal graphics card HDMI.  The other goes to a RCA Jack on the back of the computer.  During normal operation of Vista, the driver probably did some function to determine if the HDMI connection is used, so that it does not disturb the owner of a system without card HDMI with this audio port additional inaccessible appear under their playback devices.

  Unfortunately, the BIOS or the audio driver or video card driver require an update for Windows 7.  No matter what function is used to detect if the HDMI connection is present does not, if ever it comes in the playback devices.  I hope someone at HP or Nvidia, Realtek is tuned for this.

  Until the corrected drivers or BIOS, I found a coaxial wire thin with an RCA connector on one end and who connected to the Digital Audio output on the back of the computer, transferred this thread in my machine, then cut and solder this wire over the graphics card HDMI input S/PDIF.  It seems stupid, but works like a charm.

  So ends 3 days of aggravation.

• Satellite L30-113 - no sound after the downgrade from Vista to XP

  Hello to everyone.
  I recently bought a new laptop Toshiba Satellite L30-113
  with vista preintalled.

  As many users around the vista of the world seemed very slow for me so I decided to go back to Windows XP Pro.
  The problem is that I can't hear any sound in my laptop.
  In fact I found some drivers for Realtek controller High definition audio
  but they have nothing did.

  I give the floor to toshiba in Greece and they told me that this laptop is designed only for windows vista!
  Can this be true?
  Help, please

  Hello

  In my eyes, you have misunderstood something. Of course, that the laptop can handle Windows XP and it should work correctly, but as you say the device was shipped with Vista and so the guys at Toshiba support don't provide any support for WinXP on this laptop.

  As far as I know page driver Toshiba also provide drivers for win XP. Therefore, visit European driver of Toshiba page and choose the good laptop-> PSL33 Sat L30-113

  You will find a driver 5.10.0.5273 version XP. This should work!

  Have a nice day ;)

• No sound - Toshiba Tecra A8 - Windows Vista

  Hello

  I have a problem, cause I have no sound. I had Windows XP and its working perfectly. But, yesterday I installed Windows Vista (first I downloaded the vista drivers on my laptop) and I have no sound :( I installed the drivers audio realtek hd Realtek site, Site of Toshiba. Does not work.

  I checked mute/off but it's ok.

  Any ideas?

  What is the status of the sound card in Device Manager?
  Is the card its installed properly or what?

• Camileo S10 clicks in sound and in drops in volume

  Hello

  Yesterday, I bought the Toshiba Camileo S10 camcorder.
  Everything seems to work fine apart from the sound which is unacceptable.

  Here's the problem:

  I record a video on playback on my computer the pop sound every now and then randomly and enjoys different each time (left and right) speakers, the sound becomes weak and then returns to its original volume. As it is limited in some way but with a very fast attack that causes artifacts.

  This happens in all the videos I shot and what worries me the most, is that I saw a lot of S10 videos on youtube that have exactly the same problem with the sound.

  One example is this video:

  http://www.YouTube.com/watch?v=JDKo_bI4Qso&feature=related

  Notice how the sound get clicky and drops in volume at random in the left or right channel.

  Please let me know if there is a way to avoid this, as it clearly seems to be a common symptom of the S10. If there is no way to avoid it would certainly go back there. Audio quality is simply unacceptable. Even my mobile phone has the best sound quality. I don't really like the quality it's clicks and drops in the volume which concern me.

  Thank you in advance.

  Hello

  One of my friends owns a Camileo camcorder and I have a Camielo Pro camcorder as well.
  I recorded a lot of videos and to be honest I didn t notice all her questions.
  The sound was recorded correctly.

  Of course, I could edit movies recorded using some video editing applications.
  I m using Nero and some plug-ins to create a movie and burn it on CD or DVD.

  So if you really have problems during video recording you must contact an ASP for a check.

• No sound on P100-188 on Vista or Linux platforms

  Sound only works on the XP library. I tried Ubuntu, SuSE, Mepis, Linux, Vista, zabaglione, with modifications, PC but no joy :-(

  Running Ubuntu 7.04

  Step by step help would be greatly appreciated.

  Hello

  so, which system you want to use? Linux? Vista?

  In addition, how you tried to activate its "Linux"? Do you know which audio chipset is in your machine? If so, how have you tried to activate it? With alsa or OSS or compile directly into the kernel?

  A little information would be REALLY useful because no one can pull anything off your information/description that you gave.

  Be more specific and give some feedback
  See you soon

• Toshiba Virual Sound is not compatible with Vista

  I have a toshiba sound preinstalled in my equium A110-276... you know, that produce the audio output HD and SRS surround sound... When I installed vista it no longer works... If the sound is now just a normal sound not as good as toshiba virtual sound... I wonder if I can get it back... as an update or download software...

  Hello

  I m not surprised! This virtual sound utility only works with XP!

  Some guys have already posted some statements on Vista and Toshiba tools & utilities in your first posting.
  At the moment the Toshiba Vista tools and utilities are not available for download.
  I found some drivers on Toshiba Canada website.

• Re: Satellite P100-194 PSP6AE sound does not work under Vista 32 bit

  Hello world

  I got a nice Satellite P100 and configure Vista for a friend. I don't have the CD that came with the computer, so I installed those on the Toshiba site. I found out later that there is a proposed order of installations, and there is no chipset driver for Vista, so I used the XP one.
  As far as I got, everything works fine but the laptop remains silent. There is no sound from the speakers at all. Windows says it all was going well and there is a level moving in the sound mixer, but he remains silent.

  Does anyone have an idea what I could check or change? I would be very happy!

  Thanks in advance,
  Markus

  From my point of view, there is a hardware malfunction.
  Why? Because the sound through headphones. Therefore, it is not a software/driver problem.

  But what you could do is to check the audio playback device by default:
  Go to control panel of-> sound-> the Read tab
  Here the speakers should be peripheral activated and chosen as a default value.

• Sounds (music and sounds efects) but no speech in sound of DVD playback. Vista

  Real Player doesn't work at all with DVD

  Windows Media Player does not load even

  Windows Media Center plays a DVD with sound effects and music, but no speeches.

  I have tried different DVD including the new ones, all with the same result.

  Hi, you can read the article and check. Solve problems in Windows Media Player http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-problems-in-Windows-Media-Player

• Dv4-1413tx - no sound after downgrade to xp vista frm

  Hello...

  I recently bought a HP dv4-1413tx with vista home premium pre-installed on it. I tried it downgrade to Windows XP SP2. Managed to install XP on it but feels a hell of a time with drivers... Especially the audio. There is absolutely no sound. Not even the beeps.

  I tried to install UAA audio bus driver first and then the driver of HDTV LSI etc. but still no sound. I spent several hours on this subject...

  Peut - some kind soul please direct me on how to go about this case?

  I remember that I was in a similar situation some two years back in an attempt to re - install Windows XP on another laptop from my friend. We install everything except the audio. Finally, the technician at the shop could install for us. Now I'm away from the place... So can not go and find out that the man how it install it. It was also a HP laptop only...

  I would like to add that the mute button stays red and does not respond when you press.

  There is nothing about Audio in Device Manager... Maybe that's the problem.

  These are the hardware ID:

  ===========
  PCI devices
  ===========
  PCI\VEN_10DE & DEV_06EC & SUBSYS_30F7103C & REV_A1\4 & 23FE4F77 & 0 & 0008: NVIDIA GeForce G 105M
  PCI\VEN_10EC & DEV_8168 & SUBSYS_30F7103C & REV_02\4 & 22AB4E2B & 0 & 00E3: Realtek RTL8168C (P) / 8111C (P) PCI-E Gigabit Ethernet NIC
  PCI\VEN_8086 & DEV_2448 & SUBSYS_00000000 & REV_93\3 & B1BFB68 & 0 & F0: Intel(r) 82801 PCI Bridge - 2448
  PCI\VEN_8086 & DEV_2919 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & F8: Intel(r) ICH9M LPC Interface Controller - 2919
  PCI VEN_8086 & DEV_2929 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & FA: Intel(r) ICH9M-E/M SATA AHCI Controller
  PCI\VEN_8086 & DEV_2930 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & FB: Intel ICH9 Family SMBus Controller - 2930
  PCI VEN_8086 & DEV_2934 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & E8: Intel ICH9 Family USB Universal Host Controller - 2934
  PCI VEN_8086 & DEV_2935 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & E9: Intel ICH9 Family USB Universal Host Controller - 2935
  PCI\VEN_8086 & DEV_2936 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & EA: Intel ICH9 Family USB Universal Host Controller - 2936
  PCI VEN_8086 & DEV_2937 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & D0: Intel ICH9 Family USB Universal Host Controller - 2937
  PCI VEN_8086 & DEV_2938 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & D1: Intel ICH9 Family USB Universal Host Controller - 2938
  PCI\VEN_8086 & DEV_293A & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & EF: Intel ICH9 Family USB2 Enhanced Host Controller - 293-a
  PCI\VEN_8086 & DEV_293C & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & D7: Intel ICH9 Family USB2 Enhanced Host Controller - 293C
  PCI\VEN_8086 & DEV_293E & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & D8: Bus Driver Microsoft UAA for High Definition Audio
  PCI\VEN_8086 & DEV_2940 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E0: Intel ICH9 Family PCI Express Root Port 1 - 2940
  PCI\VEN_8086 & DEV_2944 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E2: Intel ICH9 Family PCI Express Root Port 3 - 2944
  PCI\VEN_8086 & DEV_2946 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E3: Intel ICH9 Family PCI Express Root Port 4 - 2946
  PCI\VEN_8086 & DEV_2948 & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E4: Intel ICH9 Family PCI Express Root Port 5 - 2948
  PCI\VEN_8086 & DEV_294A & SUBSYS_00000000 & REV_03\3 & B1BFB68 & 0 & E5: Intel ICH9 Family PCI Express Root Port 6-294 has
  PCI\VEN_8086 & DEV_2A40 & SUBSYS_00000000 & REV_07\3 & B1BFB68 & 0 & 00: Mobile Intel (r) 4 Series Chipset processor to DRAM - 2A 40 controller
  PCI\VEN_8086 & DEV_2A41 & SUBSYS_00000000 & REV_07\3 & B1BFB68 & 0 & 08: Mobile Intel (r) 4 Series Chipset PCI Express Root Port - 2 has 41
  PCI\VEN_8086 & DEV_4237 & SUBSYS_12118086 & REV_00\4 & 2A17DF6C & 0 & 00E2: Intel (r) Wireless WiFi Link 5100
  22 correspondent or the devices found.
   
  ===========
  USB devices
  ===========
  USB\ROOT_HUB\4 & 12221D3B & 0: USB root hub
  USB\ROOT_HUB\4 & 2044AD61 & 0: USB root hub
  USB\ROOT_HUB\4 & 29C7184A & 0: USB root hub
  USB\ROOT_HUB\4 & 32817C7F & 0: USB root hub
  USB\ROOT_HUB\4 & 37E9A870 & 0: USB root hub
  USB\ROOT_HUB20\4 & 2BF3D41C & 0: USB root hub
  USB\ROOT_HUB20\4 & 87AE6AB & 0: USB root hub
  USB\VID_03F0 & PID_171D\5 & 24058FCE & 0 & 1: integrated Module with Bluetooth 2.0 wireless technology HP
  USB\VID_0781 & PID_5150\20043513330A7FE20BF8: USB mass storage device
  USB\VID_174F & PID_1107\STK00001: USB Composite device
  USB\VID_174F & PID_1107 & MI_00\6 & 3AB7CE14 & 0 & 0000: USB video device
  USBSTOR\DISK&VEN_SANDISK&PROD_CRUZER_MINI&REV_0.1\20043513330A7FE20BF8&0: SanDisk Cruzer Mini USB Device
  12 person or the devices found.
   
  =============
  Input devices
  =============
  No matching device found.
   
  ============
  ACPI devices
  ============
  ACPI\ACPI0003\2 & DABA3FF & 0: Microsoft AC adapt
  ACPI\AUI0216\4 & B310638 & 0: Synaptics PS/2 Port Compatible TouchPad
  ACPI\ENE0100\3 & B1BFB68 & 0
  ACPI\FIXEDBUTTON\2 & DABA3FF & 0: ACPI fixed function key
  ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_23\_0: Intel (r) Core (TM) 2 Duo P8700 CPU 2.53 GHz
  ACPI\GENUINEINTEL_-_X86_FAMILY_6_MODEL_23\_1: Intel (r) Core (TM) 2 Duo P8700 CPU 2.53 GHz
  ACPI\HPQ0004\3 & B1BFB68 & 0: A sensor of HP Mobile Data Protection
  ACPI\INT0800\4 & B310638 & 0: Intel(r) 82802 Firmware Hub Device
  ACPI\PNP0000\4 & B310638 & 0: Controller Programmable interrupt
  ACPI\PNP0100\4 & B310638 & 0: System clock
  ACPI\PNP0103\4 & B310638 & 0: High precision event Timer
  ACPI\PNP0200\4 & B310638 & 0: Direct memory access controller
  ACPI\PNP0303\4 & B310638 & 0: Standard 101/102 key or Microsoft Natural PS/2 keyboard with HP QLB
  ACPI\PNP0A08\2 & DABA3FF & 0: PCI Bus
  ACPI\PNP0B00\4 & B310638 & 0: System CMOS/real time
  ACPI\PNP0C02\4 & B310638 & 0: Mother resources
  ACPI\PNP0C04\4 & B310638 & 0: Numeric data processor
  ACPI\PNP0C09\1: Integrated controller compatible ACPI Microsoft
  ACPI\PNP0C0A\1: Microsoft ACPI battery compatible control method
  ACPI\PNP0C0B\0: ACPI fan
  ACPI\PNP0C0C\2 & DABA3FF & 0: ACPI power button
  ACPI\PNP0C0D\2 & DABA3FF & 0: ACPI lid
  ACPI\PNP0C0E\2 & DABA3FF & 0: Sleep button ACPI
  ACPI\PNP0C14\0: Microsoft ACPI Windows Management Interface
  ACPI\PNP0C14\NVIF: Microsoft ACPI Windows Management Interface
  ACPI\PNP0C32\1: Direct Application Launch button
  ACPI\PNP0C32\2: Direct Application Launch button
  ACPI\PNP0C32\3: Direct Application Launch button
  ACPI\PNP0C32\4: Direct Application Launch button
  ACPI\PNP0C32\5: Direct Application Launch button
  ACPI\PNP0C32\6: Direct Application Launch button
  ACPI\PNP0C32\7: Direct Application Launch button
  ACPI\PNP0C32\8: Direct Application Launch button
  ACPI\THERMALZONE\THRM: ACPI thermal Zone
  ACPI_HAL\PNP0C08\0: System compatible ACPI Microsoft
  ROOT\ACPI_HAL\0000: ACPI Multiprocessor PC
  36 correspondent or the devices found.
   
  ============
  HDA Audio
  ============
  No matching device found.
   
  ============
  RAID devices
  ============
  PCI\VEN_8086 & DEV_2929 & SUBSYS_30F7103C & REV_03\3 & B1BFB68 & 0 & FA
  Name: Intel(r) ICH9M-E/M SATA AHCI Controller
  Hardware ID:
  PCI\VEN_8086 & DEV_2929 & SUBSYS_30F7103C & REV_03
  PCI\VEN_8086 & DEV_2929 & SUBSYS_30F7103C
  PCI\VEN_8086 & DEV_2929 & CC_010601
  PCI\VEN_8086 & DEV_2929 & CC_0106
  Compatible IDS:
  PCI\VEN_8086 & DEV_2929 & REV_03
  PCI\VEN_8086 & DEV_2929
  PCI\VEN_8086 & CC_010601
  PCI\VEN_8086 & CC_0106
  PCI\VEN_8086
  PCI\CC_010601
  PCI\CC_0106
  1 correspondents or the devices found.

  Can someone please help...?

  If someone who knows tell me how and in which order and what drivers to install, from the XP just installed and ready on the system, I would be very grateful... Then I will be re - install all drivers in the correct order after I freshly installed windows xp again!

  Thank you...

  Message edited by pjr on 20/07/2009 09:02

  @pjr.

  Drivers for Windows XP:

  Chipset Intel, (install and reboot before other drivers) here

  Intel Matrix Storage Manager here

  MS-UAA for SP2 (required with a reboot before the graphics and Audio, Modem driver) here

  MS-UAA for SP3 (required with a reboot before the graphics and Audio, Modem driver) here

  NVIDIA GeForce G 105M

  Modded Drivers NVIDIA drivers 185.85 worm.

  How to install under XP:
  1. Download driver here, double click and select Extract.
  2. download modded INF here and replace the original INF in extracted folder.
  3. install & restart.

   

  Intel Wireless 5100 here

  Bluetooth Wireless here

  Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it. I don't know then it's dv5 guide, but a lot of hardware and drivers are the same for both models.

  IDT High-Definition Audio CODEC Pilot,

  1 sp41698, vista, work reported in here XP driver

  2 sp41693, pilot, work reported in XP here view

  3 SP39671, driver, jobs reported in XP here or here view

  When you install a sound driver with checking the success is your sound work.

  If there is no sound after reboot check this thread. There is information how to fix this problem.

  High-Definition Audio (HDA) Modem Installer and driver here

  .NET framework (required before HP Quick Lunch Buttons) here

  HP Quick Launch buttons here

  Alps Touchpad here

  Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

  ENE CIR (infrared receiver) here

  JMB38X card reader Host Controller Driver here

  If you had for 7 unknown devices with IDs of devices such as below (buttons drivers), here

  ACPI\PNP0C32\1
  ACPI\PNP0C32\2
  ACPI\PNP0C32\3
  \4 and so on

  Do a manual installation

  Go to Device Manager, right click on the unknown device,

  Choose update driver, not to communicate.

  Choose the install from a list or a specific location, not search, have-disk,

  Navigate to the location of machine.inf.

  Do it for the rest of the unknown devices

• No sound while recording with Windows Vista

  Hello!

  Thanks in advance for the help!

  I have a new 430 of XPS from Dell running Windows Vista Home Premium 64-bit.

  I try to save and the external audio source (old audio cassettes) using audio recordings of Vista. I am inputing the audio using the socket "line in" on the back of the computer.  The Visual meter shows a signal is present, and I can save, save and playback of the audio file after it is saved.  The problem is that I can't hear any sound when recording from an external audio source.  I check in 'Sounds' in the Panel, and in 'line' monitor shows it receives a signal (and the level is turned up), but nothing is heard in real-time.  No speakers are silent. All the other sounds of the computer, MP3 and CD is heard without difficulty.  When I do a check for speaker under 'Sounds', the speakers work fine.  But I hear no audio registration until after I record the signal.

  The computer is only 2 months old, and I've never been able to hear any audio registration in real time.  This isn't something that just stopped working.

  I also use Total Recorder 7.1 and I have the same problem.  Total Recorder sees the external audio input signal and saves it.  But I do not what I did until I have read the saved file.  With Windows XP I always heard an external audio input as soon as I plugged the audio source, but so far it does not the same under Vista.

  Device Manager tells me that my sound card and driver are operating normally.

  Any ideas anyone?  Is there a change in Vista compared to XP?  Have they blocked the monitoring in real time because of some problems of conflicts or comments?  I'm just guessing.

  Thank you!!!

  Dan

  http://en.community.Dell.com/forums/t/19250187.aspx?c=us&l=en&CS=04&s=BSD

  Solution seems to be to disable the integrated sound card and buy a PCI sound card. Good news is that they are cheap.

  Just to be sure, it is the last driver I could find at Dell

  http://support.us.Dell.com/support/downloads/download.aspx?c=us&CS=04&l=en&s=BSD&ReleaseID=R190321&formatcnt=1&LIBID=0&FILEID=261430

  I suspect the integrated sound card is not full duplex or the available driver is unable to drive. The first is my best guess.

  So the bottom line is that you need a PCI Full Duplex sound card that works with 64-bit windows. The highest and digital sample rate 24 - bit is better, but I don't know it wouldn't be difficult to exceed the specifications on board. Rob - support element, Cascade Bicycle Club P.O. Box 15165, Seattle, WA. 98115-0165 206-522-3222-24 hr hotline 206-522-BIKE http://www.cascade.org

• I want to turn off sound on my Asus Windows Vista computer.

  I want to turn off sound on my Asus Vista computer.

  Click on the "speaker" icon, then mute.

• Sound does not work with Vista/Realtek!

  I use the Vista operating system.  I have uninstalled Realtek drivers when I was trying to get the sound to work.  Cannot make it work.  Speakers are not "enabled"!

  Hi Imharv,

  Download and install the latest drivers from the manufacturer's Web site or check the updates of windows

• Error with the sound when updating for Window Vista Home SP2.

  After the update to vista home SP1 SP2, the sound does not work.
  tried to uninstall and install the drivers. No use.
  Here IE 9, but it does not work on SP1.
  Help PLZ.

  has obtained the answeer, you must uninstall the audio driver with your manufacturing and restart your comp. and then download IDT High Definition Audio CODEC Driver 6.10.6087.0.

  restart your computer.

  And wooggeee, it works perfectly...

  Thanks Thahaseena M.

  Presilia Trivedi