Sound on the Toshiba Satellite Pro U200 - 199 Ubuntu Feisty

Similar Questions

• Set password Linux ATA hard drive / Toshiba Satellite Pro U200

  Sorry for the long post, but I want to be as specific as possible:

  1)
  I use a Toshiba Satellite Pro U200 under Linux (OpenSUSE) for some years now. Works fine without problems so far, even the fingerprint reader works. I deleted and never used the Windows XP preinstalled.

  For security reasons, I have now decided to put a HDD ATA password, in case the laptop is lost or stolen (changed drive for a disk Seagate Momentus 7200 FDE.2 SATA II with full encryption of the disk material).

  In order to get the protection offered by the full disk encryption, I need to set a password for the ATA. During startup, the Bios must request the password and unlock the drive only when the password is correct.

  2)
  My problem is: in the Toshiba laptop it is impossible to set the hard drive ATA password directly in the bios (as is possible in HP laptops, for example). Toshiba there is only one way to set the password to disk, which is a software utility for Windows XP (named 'Assist'). But I don't want to change the operating system only to set this password.

  3)
  Therefore, I tried the linux instructions

  hdparm - user-master m - security-all-pass SecretMasterPassword/dev/sda
  hdparm - user-master u - security-all-pass SecretUserPassword/dev/sda

  which are used for adjustment ATA passwords. Indeed, at first, it seems to work very well. The password is set and the drive is locked.

  4)
  When I restart the laptop, the Bios the HDD password request, as it should do.

  But he does not accept the SecretUserPassword prior to seizure. The answer is "wrong password", or similar.

  5)
  Analysis:

  I have no doubt that the password has been set correctly: I checked by restarting the laptop through rescue DVD in linux and unlock the disc via

  hdparm - user-master u - safety - unlock SecretUserPassword/dev/sda

  in order to use it. No problem, it works as supposed to. After the release, the disc is usable as usual. And I can also disable the password via

  hdparm - user-master u - security - disable SecretUserPassword/dev/sda

  After you disable the password, the laptop starts normally again, but I have no password.

  When I re-enable the password bios Toshiba again asks the password during initialization, but does not accept the (correct) password on entry.

  6)
  Does anyone have an explanation for this behavior?

  Bios Toshiba has somehow changes the password entered by the user, before being sent to the disk? I think that this would be inconsistent with the ATA standard.

  Anyone managed to set/change the password to ATA in a way that the disc can be unlocked via the internal order of the Bios, without installation of Windows XP and the Toshiba Software 'Assist '?

  Thanks for reading this long post so far. Any response is welcome.

  hmetz

  Hello

  As you probably know Linux is not supported by Toshiba and if you n t get some good advice here I recommend you to visit a few Linux forums and try to discuss with experts in Linux it.

• No sound on my toshiba satellite pro with Vista Business OPS

  After the most recent update of Microsoft I had no audio output of the computer, not even with headphones. would it be due to a faulty update or do I need a new sound card?
  Thank you

  Hello
   

  A. did you disconnect the speakers and check it out?

  B. who is the manufacturer of your computer?

  Let us try the following methods.

  Method 1

  The link below talking about the same error message. Open the link and click the Fix It button which can fix some problems related to the sound.

  http://support.Microsoft.com/kb/948481

  If the method above doesn't, proceed to the next method.

  Method 2

  Make sure that the default sound device is set correctly for the audio device you are using. To set the default device, follow these steps:

  1. Click on start toreduce this includes this image, type Sound in the box start the search .
  2. Click on his research at the top of the Start menu.
  3. Click the reading notice the check mark next to the default device. For most users, the default device is speakers. Make sure that the audio settings are configured as expected. Follow these steps:

  a. on the read tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, close this window to return to the previous window.

  b. on the read tab, select the playback device, click set upand make sure that the configurations are set correctly.

  1. Select the audio device you want the default audio device, and then click set as default.
  2. Click OK to save your settings and close the dialog box.

  Determine if you can now hear. If you can hear the noise, the problem is resolved. If you don't hear sound, try Method 3.

  
  

  Method 3

  Try to perform a system restore and check whether the problem is resolved.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Method 4

  Uninstall display drivers and reinstall.

  1. click onpieS.

  2 type devmgmt.msc in the search box.

  3. expand game controllers and video, sound, and right-click on the driver and uninstall.

  Try to restart your computer and check, because the drivers will be automatically reloaded.

  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Need the manual online for Satellite Pro U200

  I heard people talking about the online manual for the Toshiba Satellite Pro U200, especially when it comes to upgrading the memory. But I never saw a link to the manual online. Someone can it give?

  Neffe :)

  Hello

  Visit http://eu.computers.toshiba-europe.com > download & support > Support home page.
  Under download, you will find Toshiba manual. Click on it and choose your model of laptop.

  I check the manual and it is ready for download. ;)
  If you need more help please write again.

• Satellite Pro U200-10I - how to disable the system at startup control upward?

  : x Hi,.

  I have Toshiba Satellite Pro U200-10I and I want to disable the control system, as it is a long time to start machine. Is there a way to Devil who?

  Nedd your help! : D

  Hello

  Just checking the system do you mean exactly?
  Is this based on Windows or BIOS based?

  If you mean the ScanDisk in Windows startup you can disable it in the registry:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager
  Change the BootExecute entry to: autocheck autochk *.

  After that restart the ScanDisk is disabled and doesn't appear at Windows startup.

• How to disassemble the Satellite Pro U200

  Hello

  Lately, I have come to the need of the back opening of Toshiba Satellite Pro U200, you know the place where RAM and all the other stuff is stored.

  I have my tired to do it, but I could not open, so I was afraid to break something.

  Any of you know if it is possible to open the back of the laptop?

  If possible, it would be possible to close it later? :]]

  What you want to change on the laptop? The RAM?

  As far as I know the locations of memory are placed under the keyboard. Therefore, you must remove the keyboard stand and keyboard.
  It's a little tricky and if you n t have experience with this that you should ask a technician for laptop help.

• Error message "failed to load Tosrfcom" on the Satellite Pro U200

  Hello

  I have laptop Toshiba Satellite PRO U200 with pre-installed VISTA professional
  After restarting, even for the first time, having the following error in the event log:

  Log name: System
  Source: Service Control Manager
  Date: 07.07.2007 01:29:15
  Event ID: 7026
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: toshiba
  Description:
  The next (s) starting or starting system could not load:
  Tosrfcom

  by:

  http://www.EventID.NET/

  Can't find a solution!

  someone knows how to fix this?

  Hey Buddy,

  did you have already recovered the system (installed completely new from scratch)? If it is already done, then do it and see if the same error again.
  Maybe it s just a software problem and can be solved by reinstalling the operating system.

  Welcome them

• Satellite Pro U200: update BIOS - Toshiba common Modules is not installed

  Hello

  When I install update of the BIOS P0044v370 I have an error "Toshiba Common Modules is not installed.

  My laptop Toshiba Satellite Pro U200 with Windows XP Prof

  Pleas help me

  PS. I Don t have a Toshiba Recovery disk

  The message is pretty clear!
  The common Module is not installed and therefore you can not update the BIOS.

  Visit pilot European Toshiba, download the common Modules for Win XP and install it.
  Then you should be able to update the BIOS.

  Concerning

• Satellite Pro U200 - DC jack is broken

  Hello everyone

  I was wondering if you guys can help me because I broke the dc jack on my laptop, its load only when the pin of the charger is in it at a certain angle and I can actually feel the plug into my laptop so moving is not the charger. I tried searching on the internet but without success because I don't know the part number, and even if I put the serial number on the website of his not really give me the part number and may cause toshiba do more :(
  Now I'm looking for power supply for Satellite Pro U200-199
  Part number: PLUA1E-01900JEN
  Main features
  -Technology Intel® Centrino® Duo Mobile with Intel® Core 2 Duo processor T7200
  -Windows XP® Professional
  -100 GB hard drive
  -1 024 (512 + 512) MB of RAM DDR2 (533 MHz)
  -12.1 "screen Toshiba TruBrite® WXGA TFT
  -Drive DVD Super Multi (Double Layer) slim

  Any help would be greatly appreciated. only thing, I had an experience at the hardware level, but not very good with soldering, should weld or not it comes with the wire that can be clicked into place.

  Thank you

  In the past, I found several threads where people have reported the same issue but on the different model of laptop. Obviously some of them have done a good job and repaired only.
  To find the DC jack is not a problem.

  You can find it on eBay and it is cheap. Put in google DC jack U200 and you will find it.

  Problem is that any computer laptop must be disassembled and new connector soldered to the right place.
  Can you do this?
  I want to say if you n t have experience with this stuff don t touch anything and ask for professional help.

• Problems after Satellite Pro U200 has been accidentally deleted

  Hey,.

  I keep having problems with my laptop Toshiba Satellite pro U200. Problems started the laptop was accidentally deleted.
  I will try to describe here:

  Laptop started making noise like buzz... all the time.
  and it's really annoying. Never, it was so loud.
  Another strange thing, it is that we continue to be: after about 4 hours of running Windows, it starts to make the buzz of his stronger and ultimately all windows just freezes. You can not move the mouse can not do anything, even ctrl + alt + del doesn't work, so I have to push turn off button for a few seconds to turn off the laptop.

  I don't know what I have to do?
  is this a hardware problem? If that's what should I change?
  If anyone has had similar problem please share what you know with me!

  Thank you very much!

  > After about 4 hours of running Windows, it starts to make the buzz of his stronger and ultimately all the windows just freezes
  I think there could be something wrong with the cooling module.
  Is that your fall, the computer laptop and, consequently, the cooling module could malfunction and might makes a strange noise.

  Usually, if don t cooling modules to work properly, the temperature rises to a higher level and finally the laptop begins to freeze due to a higher internal temperature.

  In fact, this is just my personal opinion and I can't say with certainty what s wrong.
  I think you should ask a technician for laptop for a short audit

  What I can say is that it really sounds like a hardware problem

• Need new battery for Satellite Pro U200-182

  Hello

  I m needing help on the purchase of new battery for Toshiba Satellite Pro U200 - 182
  No model origin. what I found on old battrey is PA3356U - 3BRS with parameters: DC10.8V - 4700mAh

  When I tried searching on the web I found that this trick
  http://smart-parts.NET/bsearch.php?brand=Toshiba&name=satellite%20PRO&SER ie = U200% 20Black & model = U200-182

  I would like to ask if I can buy it (if this battery will be compatible) and also if its possible to buy the battery longer "life."

  Thank you for the help

  I found the info that for your laptop model there are two types of battery only:
  PA3356U-3BAS
  PA3356U-3BRS

  So if you use Google and put these numbers, you should be able to find an online store where you can buy these compatible batteries.
  By the way: link you posted is OK and I don't see the reason why you shouldn't order of it. It is listed as compatible.

  To extend the life, you need battery with more cells and ability, but it is unfortunately not available for your laptop model.

• Satellite Pro U200 supports PCMCIA cards?

  Hello

  does anyone know if the PCMCIA, for example of Netgear WG511T card will work on Toshiba Satellite PRO U200?
  This laptop seems to have a PCMCIA slot.
  I know, I already have a wireless network card installed on this laptop, but this card is not supported by linux.

  Kind regards
  CC

  Hello

  Yes, the machine supports a PCMCIA connector on the left side of the machine. So, you will be able to put this wireless card in your machine in order to use it under Linux.

  Welcome them

• Satellite Pro U200 - need drivers HDD Protection & footprint of VISTA 64-bit

  I have toshiba Satellite Pro U200 [Greece] and I need drivers for fingerprint utility and disk protection hard can you help me? It is very important too me.

  I think that gives you about boyfriend chance seems Toshiba 64-bit tools and drivers at the moment unfortunately, nothing to see :(

• CPU in Satellite Pro U200 temperatures are too high

  Hello

  I'm a little confused / concerned about the temperature of my CPU (Intel T7200) in my Satellite Pro U200-199. The confusing thing is that the case temperature is generally higher than that of the junctions of the two nuclei, which is the opposite of how it should be.

  Everyone knows this?

  As well, the case temperature is higher at seems reasonable, even in basic use. Basic use of office applications takes the temperature to 49 c, and then everything above that (opening an application for example) increases the temperature has high degrees of the years 50 or 60. Under a larger load, temperature (T-box) goes up to 65 C.

  One of the consequences is that the fan is on most of the time.

  I would like to know if there is a problem with the measurement of the temperature T-box is measured correctly, or if the processor overheats. If the measure is a fault, then do nothing about this? Like changing the BIOS?

  I should mention that the computer is only a week and has a BIOS update.

  Any ideas or help greatly appreciated.

  David

  Hello

  The temperature of 50-60 degrees is not unusual. But I wonder how you measure this temperature or what tools or utilities did you use?

  Usually the CPU is not only responsible for the temperature inside the laptop.
  The graphics card and HARD drive also produce heat which increases the temperature of the laptop.

  Anyway, the computer supports protection against overheating. This protects the laptop and parts from overheating.
  If the temperature reaches a critical threshold the laptop would be automatically stops down
  but it seems that the laptop works properly so in my opinion that you should not be worried. ;)

• Flash (TCrdMain.exe) error on Satellite Pro U200 card

  Hello

  I have Vista Business installed on Toshiba Satellite Pro U200
  and, in the event log, the following error message:

  Log name: Application
  Source: Application error
  Date: 20.11.2008 18:06:38
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: toshiba
  Description:
  Application TCrdMain.exe, version 1.0.0.9, time stamp 0x458faba6, failed mscorwks.dll module, version 2.0.50727.1434, time stamp 0x4757b767, exception code 0xc0000409, offset error 0x002b832f, 0xe38, failing application start 0x01c94b322888a3c2 process id.
  The event XML:
  
  
  
  1000
  2
  100
  0 x 80000000000000
  
  11115
  Application
  Toshiba
  
  
  
  TCrdMain.exe
  1.0.0.9
  458faba6
  mscorwks.dll
  2.0.50727.1434
  4757b 767
  c0000409
  002b832f
  E38
  01c94b322888a3c2
  
  

  someone knows howto fix it or where can I download this software of Flash cards and reinstall?

  ist it this software?

  Flash Media Driver

  http://de.computers.Toshiba-Europe.com/innovation/vista_drivers.jsp?macId=&mode=userMachines&userOS= & action = search & selProduct = 656 & selOS = 26 & selType = 244 & country = 37 & language = 13 & search =