Sounds of notifications could not be changed

Similar Questions

• Sorry, we could not make changes to parental controls settings.

  Hello.

  We recently bought two laptops for our children. My wife tried to set up parental controls, but we were striking problems on one of them.

  We have removed the trial version of McAfee that came with the laptop and installed computer Total virus defense. We tried and then configure the parameters of the family.

  A laptop works fine, but the laptop on the other, identical displays an error message when the family settings are changed.
  "Sorry, we could not make changes to parental controls settings."

  The settings seem to be there properly, despite the error message, but they have no effect on navigation or access time.

  The two laptops are running Windows 8 with local accounts for the parameters.

  Any help you can offer would be appreciated.

  Kind regards

  Leonard King

  Hi Leonard,.

  Thanks for the reply with the status.

  I suggest to upgrade your operating system to Windows 8 to 8.1 Windows and check to see if that solves this problem.

  Refer to this article for more information.

  Update to Windows 8.1 of Windows 8

  If you find difficulties to find the update by store, you can perform the steps described in here.

  Hope this information helps. Response with status so that we can help you.

• Could not check changes in the browser.

  

  Whenever I try to download it on my FTP host, a box just by reading "could not verify the changes in the browser. Check your network connection and try again. »

  I never had this before and spent all day up to that point download my site via FTP.

  I thought it may be a firewall issue, but I'm perfectly capable or a catalyst of the publishing business or the preview of the site in the browser so I doubt it.

  Hello Mall234,

  The last update of Muse with this fix was published.

  Please install the latest version by going to the Help menu > update and let us know if this solves your problem.

  Kind regards

  _Ankush

• vSphere device instant Reversion fails: A general system error occurred: could not remove change tracking file

  Many people, I'm a little in the soup this time!

  My goal is to improve of vSpere 5.0 to 5.5 has. I have the new device ready to go, but the old device just not show me the upgrade tab. Because I had already taken a snapshot, I thought that I would give to the 'update' a go. Then I changed my mind and tried to go back to the snapshot and received the error in the title:

  A general system error occurred: could not remove the file change tracking.

  I wonder if there is a difficulty, I can try to get back to a good functioning device 5.0 before I retry upgrade - or if I should just set up my new 5.5 a device from scratch. I use only 3 guests on more Essentials.

  Thanks for all the tips!

  If he has only 3 guests, I will deploy a 5.5 device costs.

  Concerning

  Girish

• The files could not be changed because Adobe Photoshop CC 2015 could not be launched.

  How is it that I get the below error when I select a batch of images in Lightroom to edit in Photoshop:

  "Could not be displayed because Adobe Photoshop CC 2015 could not be launched."

  However the 5 files open in Photoshop before the above message appears and I have to click ok for each file not open remains to be edited in PS.

  Then I find that another copy of each file opens in fact twice in photoshop.

  Then, I get this error box:

  An internal error has occurred

  AgStoreProviderSession:getEntityByID: id must be a number or a string.

  It's wasting a lot of my time. It started happening in Lightroom 6, then was briefly fixed when the sloppy until October update was released, and then reintroduced in November was last updated.

  I looked at my application logs (go to the Explorer, do a right click on the system, choose the gale, go to the activity log, applications) and it was a mistake starting Photoshop.  I reinstalled Photoshop and now it works.

• Linked IDs could not be changed

  When I click on "MANAGE IDs-RELATED", I get this error message:

  Sorry, this service is not available now. If you have linked IDs, they always connected when service is restored. Help, please.

  Please help me to go beyond that. I need to switch IDs in order to stop my account sending spam e-mail.

  Thank you.

  Updates on this topic, please see the following thread. Thank you.

  http://windowslivehelp.com/thread.aspx?ThreadId=d0777928-92De-46B4-BF93-3abe82736e14&page=2

• EtherCAT - OR Scan Engine could not be changed in Active mode, because one or several slave devices does not have operational status

  Hello, I use a Compact Rio 9074 with an EtherCAT NI 9144 chassis extension

  I am able to see both devices 9074 and 9144 Labview project, but when I try to deploy configuration 9074 controller tracking error is displayed:

  

  I tried deployment while defining the Configuration Mode and Active Mode. Also, when I check on the status of master Ethercat online its State in: pre-operational with errors. And appers this message: error-2147137769 occurred at an unidentified place

  

  I'm using Labview 2011 and the OR cRio has installed:

  

  I tried formatting cRio and reinstall NI Ethercat and scanner again

  I wonder if anyone has the same problem, I'd appreciate any help.

  Thanks in advance

  Thank you very much, DirkW worked for me immediately

• No sound on my pc, c:\windows\system32\fumugat.dll this module could not be found

  Original title: no sound on my pc

  I have no sound on my pc, when the computer is next powered it displays this message, c:\windows\system32\fumugat.dll this module could not be found. I tried everything but can not get the sound to work. Any help would be greatly appreciated.

  Hello

  1. have you done any change in software on the computer lately?
  2. What is the brand and the model number of the sound card?

  Method 1.
  Follow the procedure step by step in the article below and check.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2.
  If the problem persists, follow the steps listed in the article below and check.
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918
  Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• System Event Notification service - cannot connect to a Windows Service. Windows could not connect to the System Event Notification service

  I am unable to connect to my network wireless with my laptop Sony, (Vista home premium). This follows an infection in my desktop PC with a Trojan which did not stop, but slow internet browsing. I reinstalled vista windows on the pc and it works fine now bur my still gives mobile me this message. "Unable to connect to a Windows Service. Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. "I am the administrator on my pc and laptop. I tried to change the user nothing helps. I use Vista Home Premium Service Pack 1. Intel Core 2Duo T7250 2 GHz. 2 GB of RAM. 32-bit. Sony Vaio FZ31M. If you can give me instructions on how to remedy the situation, it would be appreciated. Thank you, Tony

  Hi 1234Tony,

  First of all, I suggest you that you also scan your laptop for infection by the virus. Second, reset TCP/IP stack Winsock settings. This could correct mistakes involving internet connectivity as a result of problems of installation of network software, due to a virus, trojan or malware infection or even due to disinfection of spyware security software.

  To repair and put back the Windows Vista

  1. Click the Start button.
  2. Type Cmd in start it the search text box.
  3. Press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.
  4. Type netsh winsock reset in the command line shell, and then press the Enter key.
  5. Restart the computer

     If please reply and let us know if your problem is resolved or if you need further assistance

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• [SOLVED] "High Definition Audio Controller" could not be started. "No audio devices installed." The Device Manager has no controller "Sound and video game. Information system has nothing under "audio devices".

  Hello

  I've had my laptop for 2 or 3 years, and the sound was always very well. Yesterday morning my computer came suddenly with the sound with a red X icon. She was not dumb, and yet no sound came. The sound options show that no audio or recording devices are installed (for disabled AND disconnected devices). There is no 'of sound devices or video game"in Device Manager. Information system shows no information (empty) under its device. However, in Device Manager, under system devices, "High Definition Audio Controller" has a yellow caution icon and cannot start.
  I have not installed a new OS or anything recently.
  I have a Dell Inspiron 1545
  Windows 7 Home Premium
  Service Pack 1 (6.1.7601 Build 7601)
  Pentium Dual-Core CPU
  64-bit operating system
  I tried:
  • Relocation and reactivation of "High Definition Audio Controller". I rebooted. No change.
  • Go to the Dell website, download audio drivers for my label service and installation. We decompress in the drivers folder and nothing happens. One will be unzip, try to take me by another plant for IDT Audio and then say 'the hardware found is not supported by this IDT' and is abandoned. I rebooted. No change.
  • Install drivers in safe mode. I rebooted. No change.
  • In administrative tools > Services, I found "Windows Audio". He had started and was on "auto". Six of its dependencies (3 parents, 3 children) had started and were to "automatic".
  • I looked at the system restore. There was a "critical update" this morning here. I restored to a point before update and restarted. No change.
  • Looked in the BIOS for an option on the sound, but could not find one. Restore the BIOS default and rebooted. No change.
  • Ran Microsoft Fix It I rebooted. No change.
  • By clicking on the audio task bar icon runs the diagnostic window thing. It detects a problem with the description: "material changes may not have been detected.
  • Put on the headphones. Nothing changes.

  I'll probably have to do a fresh install, am I not?
  I would be very grateful if you could help, thanks.
  Jerome

  Right, I fixed it myself.

  So I uninstalled "High Definition Audio Controller".
  But this time, instead of just turning it back on and let it install it himself, I clicked on "Analysis of the hardware changes" (under the Action). He finds that a new device called PCI something under other devices.

  Then I open up Windows Update and click on search for new updates (it also analyzes the drivers) and I think it just automatically reinstall "controller Audio high definition" and then there was no problem of yellow warning sign thing.

  If it does not, simply play in Device Manager with looking for changes on the hardware and the update of bollocks.

  If you're still stuck, try "Add inherited harware" (this will install an OLD device), click Advanced, click on "sound devices" and video games, wait a while, find a suitable device and continue the process...

• I had to change my password online gmail accnt and now I get a msg "configuration could not be verified" when I try to connect with the new password.

  I had to change my password for the gmail online account. I can access my account with the new password through my browser and my cell phone. But when I try to connect to my gmail account in Thunderbird
  by using the new password, I get a "Configuration could not be verified" error message.
  Any help would be appreciated.
  Thank you
  Brendan

  It looks like you are trying to create a new account. What are you doing exactly?

• IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

  IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

  Have you checked the obvious things? E.g.Ring/Silent switch on the left side is not on? Control the volume of ringtone under settings/sounds?

  If they are not serious then have you tried power the phone off and on again? Other sounds work fine, or if all sounds are dumb? for example can play you music through the speaker?

• I've recently updated my Apple ID (including the change of password). However, could not connect to iTunes to update the applications or make purchases. Any help?

  I've recently updated my Apple ID (including the change of password). However, could not connect to the iTunes Store to update the applications or make purchases. Any help?

  Have you tried a forced reboot? Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

  Then sign out of the iTunes Store and reconnect.

• HP 15-r017tu: could not all updates by cancelling changes

  The other night when I stopped my laptop it says he was 160 updates, so I let it go. Then when I turned on my laptop today he said that loading updates. It takes about 30% and now it says that we could not all updates, undo changes do not shut down the computer. It has been like this for 6 hours and I need to use my laptop for uni

  can someone tell me please how to fix this problem without losing all my work together from my laptop

  Hello
  
  Either the hard disk must be at fault or OS for corrupt or maybe it's just a few updates of Windows at the origin of the problem.
  
  You can do a system restore to a well known state previously.
  See the section "restoring your computer when Windows cannot start normally" here - http://support.hp.com/us-en/document/c03327545
  
  But first do a complete hard drive - fast and wide test first from the BIOS:
  http://support.HP.com/us-en/document/c03467259
  
  You have the support of recovery with you?
  
  If the HARD drive has FAILED, you must replace it.
  
  If the HARD drive had failed, I suggest that you change the automatic update of Windows from the control panel to "Automatically check for updates but let you choose to download and install them or Not" next time after you do a restore. Be sure to restore to a point at least 48 hours before the problem started.
  http://www.eightforums.com/tutorials/5794-Windows-Update-automatic-updating-turn-off-Windows-8-a.htm...
  
  Maybe some update is the cause of the problem.
  
  Next: run a scan of the file system - Option 2 in this tutorial:
  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html
  
  Restart the system.
  
  Then, run the commands dism, account required to Option 1 in this tutorial:
  http://www.eightforums.com/tutorials/26512-DISM-fixing-component-store-corruption-Windows-8-a.html
  
  Restart the system.
  
  Now, you manually install the update to Windows I'm matches of 5 instead of as a whole.
  
  Restart the system after each batch installs.
  
  Note: Completely disable/uninstall all Antivirus software from your system all the while.
  
  Concerning
  
  Visruth

• I could not connect my iphone 4 for Apple TV. If the sound comes out but not images.

  Hello

  I have an iphone 4 model MD128E/A

  7.1.2 IOS Software

  IAM a teacher at the University.

  I have a connection perfect with the ipad but not iphone 4

  I could not connect my iphone 4 for Apple TV. If the sound comes out but not images.

  Can I use the iphone 4 with the appletv?

  Thank you

  The iPad can be mirrored, your iPhone does not have this feature. The iPhone can use AirPlay, but not all applications are activated (up to the developer to do)