EtherCAT - OR Scan Engine could not be changed in Active mode, because one or several slave devices does not have operational status

Similar Questions

• cRIO is unable to enter active mode, because of the ethercat slave

  I have a (CS27 of HBM) ethercat slave connected to a cRIO 9068. If I right click on the device HBM under the EthercatMaster and go to 'Device status online' I put first the State of the HBM "Operational Pre", "Operational security" and then "operational." The CX27 indicates the operational stae with a LED.

  But when I try to put the cRIO in "active" Mode I get the error message:

  -The analytical engine NOR could not be changed to active mode, because one or several devices to find could not access the operational mode.

  The problem is finally solved.

  The problem has been layout of different synchronization between the HBM and cRIO (801 vs 802) Manager.

  Thanks to HBM to provide a firmware update to take in charge the provision used by OR!

• error report: ORA-20001: the print engine could not be reached because...

  Dear friends,
  I get the error report:
  ORA-20001: the print engine could not be reached because the URL is incorrect or a proxy URL must be specified.
  then click on the link to print the report.
  Print server the value-> advanced
  Protocol-> Http
  Host-> bieeserver
  The printing-> 7877 server port
  and the script->/xmlpserver/convert print server
  
  I'm sure that the settings are correct, but I get the error
  someone has an idea?
  concerning

  Hello

  No problem, happy to help.

  John.
  --------------------------------------------
  Blog: http://jes.blogs.shellprompt.net
  Work: http://www.apex-evangelists.com
  Author of Pro Application Express: http://tinyurl.com/3gu7cd
  AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone!

• I constantly get a message saying that my profile could not have access.

  I have installed as the only administrator on Windows 7. Yet in the past few months I constantly get a message that say that my profile could not have access. No matter what I do I can't seem to solve this problem. Any help would be appreciated. Thank you

  Original title: the administrator issues

  Hello

  Looks like your user account is damaged. The simplest approach is to create a new administrative account for yourself. Follow the instructions in this article:   http://windows.microsoft.com/en-US/Windows7/Create-a-user-account . Does this solve the problem?

  If the problem is resolved in a new user account, this means that the old user profile is damaged. Here is the link to repair a damaged user account: http://windows.microsoft.com/en-us/windows7/Fix-a-corrupted-user-profile.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Impossible to launch the store "we were not able to connect to the store.this could not have due server problem or the network connection has expired.

  Original title: PROBLEM WITH WINDOWS STORE

  Hi, I'm a first year student at IIT MADRAS. I just got a new laptop (W8, 4 GB RAM, 320 to drive HARD, I3). I had problems to open the store. He said: "we were not able to connect to the store.this could not have come because of problem with the server or the network connection timed out." My connection to the local network requires the proxy settings. PLEASE HELP ME.

  Hello

  Yes, the speed and connectivity of the internet must be consistent for the applications to work properly.

  I suggest you create a new user account and checkif the problem persists.

  Create a new user account.

  Setting up a new user account is a very easy process in Windows 8. There are two types of user accounts, a Microsoft user account and a Local user account. See this link for more information on the two types of user accounts and how to create them.

  http://Windows.Microsoft.com/en-us/Windows-8/create-user-account

  Try to connect with the user account that is having right of the administrator and check if the problem persists.

  I hope this helps. If you have any other questions, please get back to us and we would be happy to help you.

• my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

• When I try to change the PS CS6 workspace, I get the following error message: "Could not apply the workspace because of a program error." Does anyone have a solution to this problem

  When I try to change the PS CS6 workspace, I get the error message of passage: "Could not apply the workspace because of a program error." This happens when I try to change the default setting (Essentials) to any other predefined workspace.  Does anyone have a solution for this problem?

  If this fails, Menu Finder > go > go to folder

  ~/Library/preferences/Adobe Photoshop CS6Settings/workspaces (modified)

  Move the change case of workspaces on the desktop, and then restart the Psalm

• Windows could not start. Status: 0xc000014c

  I had a Final message on my computer when I started my computer, instead of going to Windows, it will put in place then fanally this message.

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "Repair your computer."

  Status: 0xc000014c

  File: \Boot-BCD

  Status: 0xc000014c

  Info: An error occurred trying to read the boot configuration data.

  I did not "Windows installation disc", it needs to restart the computer.

  Where can I get this for my 'Windows Vista', because it is a very old from the beginning of 2007 version, please notify Dell INSPIRON 1501.

  Thank you

  Kind regards

  Imtiaz.

  Hello

  Note:

  Will need you the Windows Vista follow these steps. You can get in touch with the manufacturer in case you have Windows Vista preinstalled on the computer for using the Windows Vista DVD recovery system.

  Method 1:

  Do the Startup Repair.

  Reference:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 2:

  To solve the problem with the data (BCD) configuration of startup, you can check the link below.

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

• Windows could not start. Status: 0xc000225. File: \Boot\BCD

  Pavilion dv7 - 6187cl Entertainment PC

  Hello

  The following assumes that you are using Windows 7

  If you do not, use another PC to create a Windows 7 recovery CD.  Download the ISO relevant among the links below.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.  One time created, or if you already have this, insert the CD into the laptop and restart at the start of it.  Select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart the laptop.

  Kind regards

  DP - K

• resolve issues found this problem "hardware changes could not have been detected."

  my pc has encountered this type of problem, when I visited my troubleshooting... im running windows7 basic family... What can I do to solve this problem, id already run microsoft fix in my pc but nothing is changed, I went to to see Device Manager if there is a problem, but I see no problem in Device Manager What does this problem mean? Please help me, your response will be much appreciated.

  IM on windows7 basic family and not vista... what will I do, can you sat down I like to a step by step procedure? Thanks a lot.

  Ask your Windows 7 questions in the correct Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Scan engine is not running

  Hi guys!

  I m looking for your help on a problem with a Cisco IPS (B-BEAUTIFUL) which shows the analytical engine= keep

  Here are the CG and the Version of my IPS:

  Version: 7.0 (6) E4

  OS version: 2.4.30 - IDS-smp-bigphys

  If I run the show events command I get the following lines:

  CT - sensorApp.650 does not

  evStatus: eventId = 1326914865100530240 = Cisco vendor

  Author:

  hostId: XXXXXXXX

  appName: modprobe

  appInstanceId:

  time: 2013/07/13 02:11:05 2013/07/12 20:11:05 is

  syslogMessage:

  Description: Note: /etc/modules.conf is newer than /lib/modules/2.4.30-IDS-smp-bigphys/modules.dep

  The following lines show the result of the show status command:

  See health XXXXXX #.

  Global Health Status Red

  Health for applications failed Red

  Health status for the updates of Signature not enabled

  Health status of license key Expiration Red

  Health for Red running in Bypass Mode

  Health for the Interfaces to the low red

  Health for the Green load control

  Health for the time since the last recovery of the event not enabled

  Health for the green number of missed packets

  Health status for the use of the memory not enabled

  State of health of overall correlation not activated

  State of health for network Participation not enabled

  Decision of sensor vs0 virtual Green

  Decision of sensor vs1 virtual Green

  Do you have an idea of what's not here?

  I'll appreciate any help on this matter,

  Thank you people!

  Hi, manual,.

  Versions pre - 7.0.8 have problems with the latest signature updates, so more that probably you will face this problem after each update of the signature. Then I suggest you spend at least 7.0.8 or 7.1.7.

  HTH

  Luis Silva

  "If you need IDP (planning, design, implementation) assistance do not hesitate to join.

  http://www.Cisco.com/Web/partners/tools/pdihd.html

• MS outlook 2007 Error 1923 office source engine engine could not be installed?

  I am unable to get outlook 2007 installed, he asked why the system I have variefy I have permission there is a pc at home (never a working pc) I am owner and administrator. Can someone help me get through this.

  The link is attached... my apologies

  http://support.Microsoft.com/kb/926704

• My iPad is undate 9.3 iOS because they say I have no internet connection to check the download, which obviously could not have downloaded without that connection!

  MY downloaded iPad ios 9.3 but says that he cannot verify the download, because I have no internet access. OB I have access or otherwise how would it get the download? Will try 4G wifi network at home, hope it will work!

  Hi there Simon_68,

  Looks like you can not update your iPad for some reason any on air. I would try the troubleshooting in the following article:

  Get help with live iOS updates

  If you try to update the iOS on your device, you may experience one of these messages:

  
  "Cannot control upgrade." Year error occurred checking for an update of the software. »

  
  "Failed to verify the update. iOS has no verification because you are no longer connected to the Internet. »

  Try to update your device using the same network. If you still see one of these messages, try to update your device using another network. If the problem occurs after you try to update with multiple networks, use iTunes to update your device.

  Learn more about iOS updates.

  Thank you for using communities of Apple Support.

• Could not update operating system-product name: BK340AA-ACJ

  I want to upgrade my operating system from windows 7 to windows 8.1

  my model # is CQ1 - 1030 IN; product #: BK340AA-ACJ.

  I created a USB bootable with iso file windows 8.1. but when I plug it start my pc

  and go to the bios settings > > under Startup settings > > I don't see usb option to order first to the priority boot device?

  What can I do? Help, please!

  See this:

  http://support.HP.com/us-en/document/c03659945

• How to change the Apple ID on one of the two devices?

  I have two iPhones with the same Apple ID used by two members of the family.

  When done or receives a phone call, the call history displays the same on each phone, probably due to having a single Apple ID.

  My plan is to create a new Apple ID, disconnect one of the iPhones and then sign in again using the new Apple ID.  (I realize that I'll lose a few apps and photos, but this is a minor problem that he has little of each.)

  This sounds like a plan?  Am I missing something?

  Thanks for any suggestion or disagreement.

  The following can help: what to do when you have changed your Apple ID email address or password - Apple support