sounds seem to be off / help tuurn back on

Similar Questions

• Computer shuts off and comes back over and over again trying to open a session

  Original title: when I turn on the computer and the connection, it will compromise the destop and then shuts off and comes back, over and over again. I have run and remove detections from virus and bug, but it still does not work. Help
  Can I delete something so that my computer turned on? After f8 button the window xp from microsoft to address blue lights with a list of things to do in which nothing has allowed so far.

  Hi bonnieb1941,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. How have you tried to run the virus and bug checks?

  4. is this the machine is disconnected and re-login in back or just reboot?

  Step 1:

  If the machine is in continuous loop, then try to disable the auto restart in case of system error and let us know the error code.

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. Select disables automatic system failure reboot when the Windows Advanced Options menu is displayed and press ENTER.

  Check the link for more information:

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2:

  Also, try unplugging the external devices connected to the system and check if the system boots normally.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• the problems of sound, lost power when the power came back... no sound

  I have a Creative x - fi titanium sound card to sound problems, loss of power... when the power came back... no sound... Please help!

  Maybe the following link would provide a few ideas:

  Windows 7 - no sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (valid for XP - Vista - 7)

• Hi all, I keep is typed in the password at startup box, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Hi all, I get a storm of +'s typed in the password at startup box upward, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Clings in the key on the keyboard? Wired or wireless keyboard?

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• The left side of my headphones is stronger than the right side, I tried the L and R slider in the settings, but it doesn't seem to work! Help, please

  On the side of my ear legt is stronger than the right side and I tried the L and R slider in the settings but it doesn't seem to work! Help, please!     BTW, I have the iphone 6 sec more

  Left *.

  earphone *.

• Why can I not downloand the guided help to back up the registry keys?

  I have Windows XP with SP3 and Internet Explorer 7 on my gateway Media Center 11.  I tried to download the INTERACTIVE HELP to back up the registry in Windows XP and I got a message saying "it was not available.      Do you have a cure?   Thank you.

  Hello
  I suggest you to download from this link and check to see if the same problem happens:

  http://support.Microsoft.com/AW/322756

  Check if that helps.

• Messenger guard in a dropin off help please a ppl can't see what iam writeing them too?

  Messenger guard in a dropin off help please a ppl can't see what iam writeing them too?

  Hello wadewhitney,

  There is a separate instance specifically for Windows Live Messenger Windows Live products.

  If you can't find a solution on the link below, then please re - ask your question there.
  http://windowslivehelp.com/product.aspx?ProductID=2

  Sincerely,

  Marilyn

• Service Pack 2 turns off sounds when installed.can someone help? has tried twice and had to use system restore both times.

  Vista 64 bit lose sound after service pack 2.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Multisim 12 - by clicking on the button "stop the simulation", does not seem to turn off the circuit

  Greetings.

  I recently installed 12 Multisim and have not changed the basic operational parameters, I know...

  Shortly after installation, the application is an update.

  Your help is apprecaited to understand what is happening...

  Steps to recreate:

  1. start multisim.

  2. open a very basic circuit that includes a battery 10V with the ground, a lamp, a voltmeter between the lamp and an ammeter in series.

  3. use 'switch' at the top right of the appliation multisim window to run the simulation.

  4 lamp shows a 'enlightenment' and voltmeter indicates 10V and ammeter indicates .1a circuit.

  5. use the switch to stop the simulation.

  6. no change in the circuit or lighting of the lamp measures.

  7. same results if the simulation starts the arrow and the red square are used to start and stop.

  If I close it and reopen it circuit, the circuit begins in the OFF state, but will not OFF If when you select stop simulation.

  This is the case with several circuits, those provided by the College and the other that I created based on the same design.

  Multisim restarting has no effect to correct this observation.

  It doesn't seem normal that when the simulation running, values or apparent lamp lighting does not change.  The simulation doesn't have to go back to the start state (OFF) when I stop the simulation?

  I captured the homerun status after stopping the simulation.

  Thanks in advance for your help.

  Zan

  Hi zanzarista,

  Multisim retains the values for everything in the circuit when the simulation is stopped. Which means that you are able to view the values on your instruments (such as multimeters) even after the termination of the simulation. When you start a simulation once again, starts all over again and that's why you see a 0 momentarily.

  It is the way in which the software is intended to work.

  I hope this works.

• my sound seems to have been disabled. I have a red corss on the sound icon

  Small unknown reason the sound on my pc seems to have disabled bene. In the toolbar to the bootom of the screen there is a red cross next to the voleum command and I can't access it?

  Hello

  1. what operating system is installed on the computer?

  2 have you made any changes to the system before the show?

  3. Since when are you facing this problem?

  In the Middle so that you can check the link below to solve problem with any noise in the Windows computer.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Please come back with more information on the issue so that we can help you best.

• Windows does not recognize tv as audio device after it has been turned off and turned back on.

  I have my computer hooked up to a HD TV with the HDMI cable.  The sound also pretended on television.  The HDMI cable is connected to my Radeon HD 6950.  I use Realtek HD Audio Manager with the ATI HMDI default Audio device.  All records are up-to-date.

  When I put my TV off and leave the computer running, I go back and turn on the TV and the computer behaves as the TV is not plugged, but only for audio.  The video is still there.  In the audio playback window, I noticed that Windows would go to the optical audio device, even though there is nothing plugged into this Jack.  I disabled all other devices and left only the HDMI device, so it will not move on.  Now when I turn on the TV it is just like nothing is plugged in at all for the audio.
  Any help is greatly appreciated!

  Hello
   
  1. What is the brand and model of your computer?
   
  2. which edition of Windows are you running?
   
  Example: Windows 7 Professional 32 bit.
   
  It could also be a possibility that a manual entry is required from your TV to the HDMI connection, please check your Menu\setting where the HDMI and PC connection is checked once it is connected to options to switch the Audio and TV screens.
   
  Please follow the steps mentioned below to help solve the problem.
   
  To disable improvements audio speaker

   
  a. open sound by clicking on the Start button, then Control Panel. In the search box, type soundand then click on sound.
   
  b. on the playback tab, click speakers, and then click Properties.
   
  c. click the enhancements tab and then select the check box turn off all the improvements .
   
  If you do not see the enhancements tab in the speakers Properties dialog box, these features are not available for your speakers, and this procedure is not applicable to your computer.
   
  If disabling audio enhancements solves the audio problem you are having, this indicates usually that your audio driver needs to be updated.
  
  Reference:- why don't I hear audio when I connect my computer to a HDTV?
   
  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions
   
  I hope this helps.

• Satellite A200 - 1 M 8: the monitor shuts off and cannot back up to Vista

  Hello

  I have the Satellite A200 - 1 M 8 with original Vista. Sometimes, I have some problems with the display (I have the latest drivers).
  The monitor turns off (not as usual but it is gray instead of black) applications flow normally (I hear the music of film, this) but I can't get back into windows.

  When I push button hibernation and I try to go back to windows, I see the blue screen then the computer resets.

  It happens very often and is really frustrating because my internet disconnects and downloads.

  I don't think that the temperature is too high because I think it's cool. How to fix this?
  Maybe some graphics settings or new BIOS?

  Please help me. I can't stand it!

  null

  Hello

  Your laptop is preinstalled with recovery delivered image, or if you have installed your own operating system?

  I have the Satellite A200-1CR preinstalled with original Toshiba Recovery DVD. I use the laptop quite intensively all day, but I never noticed anything like that. Since when did you notice this strange behavior?

• I deleted the tool sound card - how do I get it back?

  I used Add/Remove programs to free up space, and I think I deleted a program that performs his mistake.
  Now my laptop continues to send error message when I try to listen to music etc.

  How can I get the sound to work on the laptop?
  Anyone could help?
  I'm only semi in computer science.

  Hello

  Because Windows XP and Vista are supported by the Microsoft System Restore useful tool, you can use this program to set the operating system to the point of time at the beginning before you deleted the sound card tool.

  I think it's the easiest and the best way to get it back ;)

  Try this!

• Tecra 8100 Sound for MS-DOS please help!

  I try to get her going under MS-DOS 6.22
  It's a Yamaha DS - XG Soundchip YMF744 and the DOS driver will not work! I can't find a better driver of Toshiba or Yamaha.
  The utility BACK know that channel DMA isn't available.
  In addition, there is no .sys file and I do not know what lines to add to the autoexec.bat and config.sys file.
  I don't get that FM music is going during the loading of "set blaster = a220 i: 7 d: 1 t:4" but the sound does not work.

  Can someone help me please? Thank you very much!

  Daniel
  TADA2000

  Hello

  As far as I know the sound feature depends on MS-DOS-based program you are using.

  As far as I know, you can use a dummy driver of his normal BACK. You will have all the features of the sound card, but it will work!

• Sound seems to be decreasing after that I have used headphones, or turned down the volume.

  I have a HP G62 and he had a GOOD volume, but after that I have to use headphones or turn down the volume, he seems to do something for the volume and when I want to play sound after headphones are disabled you can hardly hear it.
  I turned the volume up on top of everything I can find, but it is so weak, it is not worth listening to!

  Hello

  1. What is the operating system installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the article, and check whether the problem is resolved or not.

  No sound in Windows (Windows 7)

  Note: this also applies to Windows Vista and Windows XP

  Hope that helps.