my sound seems to have been disabled. I have a red corss on the sound icon

Similar Questions

• Xbox will not connect to xbox live and said "Uh Oh, seems to have found a bug in the system.

  So I went to a game on my xbox and it froze, I so stop my xbox 360 and turned it. When it was turned on it says not connected to xbox live, so I did the steps and plugged but it got to the last step where it connects to xbox live, and it said unable to connect to live. So I went on the xbox website and I registered and it says "Uh Oh, seems to have found a bug in the system and it tells me I have no friends and it does not display my photo on the site...» It happened once in October, but has not occurred again until now. I need help please to find what's wrong.

  Try Xbox support:
  http://support.Xbox.com/en-us/

• I can't check my email because my email has been disabled because I'm a student at the University

  I can't check my email because my email has been disabled because I'm a student at the University.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <==> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• New photoshop cc seems to have a bug wrt to the forefront of the toolbar and the places of the background.

  New photoshop cc seems to have a bug wrt to the forefront of the toolbar and the places of the background. When I select a color to use as a fill the squares show gray and the filling is grey rather than the chosen color. Never had a problem with that in the previous version of PS. could something be established or initialized to cause this state of affairs?

  Change your document to shades of gray, RGB, or change the selected channel to the RGB data instead of a mask.

• Printer Epson Stylus C88 + and a Hp Pavilion computer. I have a red light on the printer, but I don't know what ink is out

  I have a printer Epson Stylus C88 + and a Hp Pavilion computer. I have a red light on the printer, but I don't know what ink is out. I can't find the ink level monitor. Can you help me?

  If all else fails, read the user guide:

  http://files.support.Epson.com/htmldocs/sc88p_/sc88p_ug/wwhelp/wwhimpl/js/html/wwhelp.htm

• I am unable to have Firefox remember passwords. The 'KEY' icon which is supposed to be on the left side of the address bar is not there. Windows Vista Ultimate Edition, Firefox Version 9.0.1

  I need to have Firefox remember passwords. When I go to 'HELP' to get the instructions to do this, I am told to click on the 'KEY' icon on the left side of the address bar. But there is no icon.
  Windows Vista Ultimate Edition, Firefox Version 9.0.1
  I could use some help, thanks.

  Make sure that you are not Firefox running in permanent private browsing mode.

  • https://support.Mozilla.org/KB/private+browsing

  To view the history settings and cookies, choose:

  • Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck the box: [] "always use the navigation mode private.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

  See also:

  • http://KB.mozillazine.org/User_name_and_password_not_remembered

• my system update two days ago, the top of the page seems to have moved down, partially hiding the minimize/restore button.

  This seems to be linked to changes in the presentation of the toolbar, as with the menu option 'View' checked the screen returns to normal, but then my favorite icon disappears. If I uncheck the "View menu" option, I get the icon back favourites, but the minimize/close button disappears almost.

  Have you tried to disable hardware acceleration in Firefox?

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  It has no effect if the window of Firefox is maximized?

  You can also check the problems caused by a corrupt localstore.rdf file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Microsoft seems to have a virtual rendering of the download page of Windows XP problem

  If I go to the following web address in microsoft, the page does not seem to make properly (only the text, jpeg etc.):

  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx/

  What is interesting is that if I remove the slash (/) the page is displayed correctly:

  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  I tried it on chrome, firefox, and IE 9 and all show the same thing. Is it just me or is this a problem for microsoft? I'm assuming that the Web page has not been compromised?

  I tried to look for an email/contact number for questions related to microsoft Web sites... but could not find. As for this, I apologize if this is in the wrong forum.

  The slash after the .aspx is an incorrect link. If you found a site of MS, then they have made a mistake on this page including the trailing slash.

  Try this link to report:

  https://lab.msdn.Microsoft.com/mailform/contactus.aspx?refurl=%2fen-us%2fsharepoint%2fux%2Fforums%2fuxservices%2fepxfooter&loc=en-us

  Make sure you indicate what page it's on.  Include the URL of the page.

  Steve

• error code 32 - a driver (service) for this device has been disabled. Another driver may be offering the functionality

  Type of device, DVD/CD Rom drives

  Manufacturing (Standard CD Rom Drive)

  Location Bus number 1, target 1 lun 1. 0

  My computer repeat myself that everything is up to date and works fine

  Thanks in advance

  I went and deleted the line of the registry and it fixed. You can always do an export of the registry before deleting anything out if it messes up you can always import again.

  That's what I found

  You can fix this by going to start, then run, type regedit. Open hkey_local_machine, then system, then control, then the class, then 4D36E965-E325-11CE-BFC1-08002BE10318, once in this time more to the right side and remove the upper and lower filters then filters. Just restart your computer and your CD-ROM/dvd-rom drive will work properly, if you look in Device Manager it will be more of a question mark and it will tell you everything works correctly.
  It was not too bad. I'm also the one who does not like to mess with the registry, but when you have step by step instructions it seems to go ok. Also when I did that I don't have all the top filter just the lower part. From what I have found in some other forums is that some people have one or the other or both just delete both if they are there.

• Elements first 13 on Mac. try to use the motion tracking. get error "the media file seems to have a bad entry in the catalog. Please rename it for use. »

  Someone at - it solved this problem?  What is the 'catalog '.  I've been an import (1080/60 p) and get started.  Everything else seems to work very well.

  Steve, I opened the "Organizer" is gone to the root AVCHD (marked PRIVATE for some reason any).  I selected add media from the root directory.  It has imported media.  I then click with the right button on the desired video file and opened his first 13 items.  Loaded automatically moving.  I tried the tracking motion AND IT WORKED!  Thanks for your suggestion because it made me think that maybe there is some hidden files or that the Organizer could load the file moving PE13 how you want.  He did and it works now.  I will be certainly all future media in this way. Thank you, Don

• support deleted files now, I have white screen and all the white icons. tried to do a system restore and it tells me I need restored HOW exe?

  SOMEHOW DELETED THE EXE FILE

  Have you looked in your Recycle Bin to see if the deleted files are still there? If they are still there, you can click right restore these and select. You can also try Recuva to try to recover deleted files. It's free.

  http://www.Piriform.com/Recuva

  I hope this helps.

• My documents have a red exclamation mark on their icons symbol - it was not there before

  This could be trying to save with MacAfees online backup?  I couldn't complete the download because of an error.

  It could be the feature of McAfee for the backup, I guess if you get a backup this success will delete your file. You can confirm with the help of McAfee.

• HP Pro X476dw: HP X 746 Pro "integrated network capabilities have been disabled. Contact your network administrator. »

  Hello

  I have a HP X476dw Pro Printer.On the configuration of the network under network printer menu, watch 'integrated network capabilities have been disabled. Contact your network administrator or the person who set up the printer'.

  I can't print or reset the printer to factory settings. Any idea?

  Thank you very much

  I found a solution by myself:

  On the ready screen:

  1. Tap the Back four times consecutively to open the Help Menu.
  2. Scroll down and find "toggle the Menu.
  3. Click on "activate/disable Menu."
  4. Click on 'network '.

  Make sure that all the network is turned on, otherwise click Ok to activate all the network.

• When my DVD drive would not work, I bought an external. I get the same message when I go into properties. Pilots have been disabled.

  When my DVD drive would not work, I bought an external. I get the same message when I go into properties. Pilots have been disabled.

  Hello

  Check with the manufacturer of the system, their online documentation and drivers, diagnostics, and
  Ask problems known in their forums. You may also check those similar
  resources on the site of the manufacturer of the actual device (for the original drive).

  =================================================================

  It is not surprising that the same issue affects the old and the new drive.

  This problem may be caused by the presence of too many CD/DVD programs competing for resources,
  especially by these programs that run at startup.

  Even if the error is not Code 22 check these:

  Code 22
  http://TechNet.Microsoft.com/en-us/library/cc731267 (v = ws.10) .aspx

  How to fix the Code 22 errors
  http://pcsupport.about.com/od/errorc/a/code-22-error.htm

  How to enable a device in Device Manager in Windows Vista
  http://pcsupport.about.com/od/windowsvista/HT/enabledevvista.htm

  If necessary:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

   

• OfficeJet 8620: OfficeJet HP 8620-"Web Services has been disabled!"

  About 6 months ago I bought an OfficeJet 8620.  It worked fine for 6 months.

  It is connected via WiFi using a DHCP address, and the network as the scanning options to the network folder and Web admin are working very well.

  I can access the printer Windows 10 PC, iPad Pro and 27 "iMac with OSX 10.

  I decided I want to enroll in the program HP ink instant - so I tried to enable it.  Through the web administration page, I discovered that 'Services Web has been disabled!   Please contact your administrator or the person who set up the printer.

  Any attempt to install or activate the web services (either through the admin web or printer) translates the same error.

  I have reset the printer to factory defaults and the error is the same.

  I'm completely unable to implement web services.

  I don't know what should be the next step.

  Welcome to the Forums of HP and thank you for your efforts so far @Hexland, I accept the challenge of helping you get this to work.

  From your description of the issue, and what you've already tried, I think it would be best to reset the most complete.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Printer resets: What You Should Know by @Bob_Headrick

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  Please take a moment to read the privacy policy of HP to http://www8.hp.com/us/en/privacy/ww-privacy.html this privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online business is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.