Source for mapping target

Similar Questions

• Account the account mapping target accounting Source code

  Hello friends,

  We are working on the 10 different Opco / entities and 5 of them have a single accountant. Whenever we map the codes of the source to the target account codes account we do this for each entity.

  Can you please help me find an option to update mapping in a single operator LTD./entity I can automatically update all 6 opcos/feature mapping in the same way in all Opcos/entities

  Thank you...

  I assume from what you say that you have a separate location for each entity. If this is the case, you can choose one of the locations in the metadata of places such as the location of the parent, which means that all its children will inherit thesingle together mappings defined in this place, so just change once the mapping and they are taken over by all related sites. Note, however, that will be the case for all dimension mappings do not a few accounts.

• Query metadata ODI to find the source and the target table for Interface

  Hi Experts,
  
  Customer heading there source of EBS 11.5.10 in R12. They are BIApps ODI. 7952 version. Since then, all mappings there are customized they may not disturb on support of Oracle BIApps is concerned.
  Now, we need to know how many ODI mappings there source EBS is the 11.5.10 in R12 migration and we can only target mappings accordingly.
  
  So, please give me with entries below:
  
  (1) any request for metadata that will give me the information of the source tables table and target them in against an if-same interface that the source of the main interface is another interface.
  (2) what are the other stuffs that I need to look at from the point of view of the mapping changes when the source is upgrading.e.g. only change the source table is enough or I need to focus on other animals. I feel she's boiling down to create a separate source for R12 adapter.
  
  Kind regards
  Snehotosh

  First open the designer-> models and check which model has got the mapping of the eBS. Get this code with this TERRIBLE application

  SELECT count (distinct i_pop) of SNP_POP_COL
  where I_POP_COL in
  (
  Select i_pop_col in the SNP_POP_MAPPING where i_source_tab
  in
  (
  Select i_source_tab in the SNP_SOURCE_TAB where i_table in)
  Select i_table in the SNP_TABLE where I_MOD in
  (select i_mod in the SNP_MODEL where mod_name = "PUT_HERE_YOUR_NAME")
  )
  )
  );

  Will not consider some other influence (i.e. the procedure), it will be an indicator of average first level.

• Incompatible source to account mapping target

  Hi Experts,
  The source system consists of the SAP GL codes and an important number codes SAP have a corresponding Oracle GL code. Based on this combination, they correspond to the target accounts.
  
  For example a SAP 500010 code has a code of Oracle 50001 and mapping is 50001050001-> A10000010. Second, there are SAP codes that do not have a code Oracle so for example SAP code 500011 maps directly to the account of the A10000011 target, which is defined in the account mapping.
  
  Also the load of data excel file contains code SAP & Oracle code in different columns. How can I go on this source of inconsistency target account management? Do I need two formats to import here?
  Please suggest an approach.
  
  Thank you and best regards!

  Hello. You don't need 2 formats for importing the data source file. My suggestion is that you concatenate the SAP and Oracle code set code in the input format, no matter if they are in the columns of differnet. I'm assuming where a SAP code has no GL corresponding Oracle code gl oacle column have no value, so the concatenated value represent just the SAP code.

  You will have then the mappings such as 50001050001--> A110010 and 500011--> A110011 in the mapping for the location of the FDM tables.

  Published by: SH on March 3, 2011 09:43

• Drag and drop, 1 share of different sur-succes drag Source, 4 Drop target, for each. Is this possible?

  Hello.

  I created an infographic of type board game and wants that the participant to be able to enter the game room, then drop it into different spaces on the Board, each holding to another slide. I need interaction drag - déposer so that they can pick up and drop the piece. Now, what I need is for each target to have a different action, but even if I add each one to a different group, if I change an action for one, that it applies the change to all drop targets.

  Is there a way to get around this?

  In addition, once / if possible, I would like to add a "back button" on each of these slides and would need when the participant returns to the boardgame slide, they can move the piece to a different drop target to read the following description. I think that the best way to do this would be to make all the "wrong" answers, while the game piece is not stuck once they have fell on a drop target "correct." Please correct me if I'm wrong.

  If I understand you correctly, I think that I thought about it.

  1. Create your Drag and Drop, as you would normally
  2. In the Panel of Drag and Drop, select the Options tab
  3. Click on the button set the correct answers
  4. The value of each drop target to have the source of displacement of the source (you must choose the sequence in the Type drop-down list)
  5. Create the slides that you want to display for each drop target
  6. Select one of the drop targets
  7. Go to the Format of the Panel Drag and Drop tab
  8. The Actions of the object... a button click
  9. In the action column, select go to slide, and then select the appropriate slide
  10. Repeat steps 6 through 9 for each target deposit
  11. Overview of the project

  I did a quick test and it seemed to work according to the settings you said earlier.

• "Single source to multiple targets in the Oracle XSLT Mapper"?

  Can someone provide examples for the single source to multiple targets in Oracle XSLT Mapper scenario

  You can have several sources, but target the single node in an XSLT mapping.

• How to migrate data from a source to multiple targets (tables)?

  How to migrate data from a source to multiple targets (tables)? Describe the General steps, please or point me to a tutorial

  Yes, a table in a mapping element can be source and target at the same time (i.e. a target can be reused as a source for the rest of the map on the right side of the table).

  Don't forget to check the order of loading (in the property map), to ensure that the reused as source is loaded before the final table target table.

  I tested it and it works. However, the documentation is not said in the link I gave you above:

  "Each element of data store that has entries but no exits in the logical diagram is considered a target."

  Usually, I tend not to do. I am in favour of a Divide and Conquer approach and try to have my mapping as simple as possible. It is easier to debug and maintain.

• HFM as a Source and a target in a single application of FDM

  Y at - it an adapter for FDM 9.3.1 that enables FDM to connect to HFM as a source and a target? What I want to do is to create an automated process to extract data from an application of HFM, re - map these data and load it into a second HFM application.

  Hello

  Unfortunately it is not. FDM views HFM/Essbase/Planning/Enterprise as target systems only.
  There might be a way to do it through scripts / api... but nothing out of the box.

  Thank you

• Getting error while inserting data from source to the target in the procedures?

  Hello

  I want to insert the data from the source to the target in the procedures, have the same schema.

  For this, I did as follows

  Command on the source:

  Technologies: oracle

  Schema: EDWHCMB

  Command:

  SELECT COMPANY_NAME, COMPANY_CODE OF

  EDWHCMB. DWT_COMAPNY

  Command on the target:

  Technologies: oracle

  Schema: EDWHCMB

  command:

  INSERT INTO EDWHCMB. TEMP

  VALUES)

  COMPANY_CODE,

  COMPANY_NAME)

  I have run the procudere then I got error as follows

  ODI-1228: SAMPLE1 (procedure) task fails on ORACLE EDWH connection target.

  Caused by: java.sql.BatchUpdateException: ORA-00984: column not allowed here.

  
  

  How to insert the data from the source to the target in the proceedings?

  Please send any document to this...
  

  Please help me.

  Thanks in advance,

  A.Kavya.

  Hi Bruno.

  If your tables are on the same schema then why do you use command on the source and the command on the target? You can simply do the following on the command on the target

  INSERT INTO EDWHCMB. TEMP

  SELECT COMPANY_NAME, COMPANY_CODE OF

  EDWHCMB. DWT_COMAPNY

  
  

  If you really want at all to use the command on the source and target both then I think you need to change the following code on your order on the target

  INSERT INTO EDWHCMB. TEMP

  VALUES)

  : COMPANY_CODE,.

  (: COMPANY_NAME)

  Hope your TEMP table has only these 2 columns.

  Thank you

  Ajay

• Need to create a structure for the target data store?

  Hi Experts,

  If I create a structure for the target data store, and then load the data from source to target works fine. If I make mistakes.

  Is necessary to create a structure for target?

  Please help me...

  Thanks in advance.

  A.Kavya.

  I found the answer. No need to create the structure for target temporary data store. and we need to create the structure for the permanent target data store.

• Create Source for Interface - using API

  You will need to create source for newly created using API interface.
  
  Tried it with code, get below error below
  
  During the synchronization of a new object was found through a relationship that was not marked cascade PERSIST:
  
  Please help on this, thanks.
  
  Here is my code component,
  
  
  The list of ds < DataSet > = next_intr.getDataSets ();
  < DataSet > iterator itr = ds.iterator ();
  DataSet ds_nxt1 = itr.next ();
  String ds_name = ds_nxt1.getName ();
  If (ds_name.equalsIgnoreCase (ds_nxt. GetName()))
  {
  Collection < SourceDataStore > ds_sources = ds_nxt.getSourceDataStores ();
  ds_nxt1.addSourceDataStore (ds_sources. Iterator(). Next());
  }

  http://odiexperts.com/creating-permanent-interface-based-on-model-level-2/

  http://odiexperts.com/creating-interface-for-single-source-and-target/

• Transformation with 2 source to 1 target

  Hi all
  
  
  I have two variables(schema's) source I need to match the 1 target schema), I need to use the processing activity that I need to register for each two sources to the target of the scheme I have given multiple. Any ideas how I can do this?
  
  
  Thank you

  The only way I see is to make a third diagram with two nodes: one for each variable of the source. Create a variable-help for her, having-right/copy the two sources for the corresponding nodes in the help-variable.
  And turn that one to the target.

  Kind regards
  Martian

• The installation source for this product is not available, ensure that the source exists and you can access (to remove Microsoft silverlight)

  I need to install Microsoft silverlight to watch films from netflix, but it is impossible to install it; but in my programs, I have microsoft silverlight (old), I think that if I remove the old program, the new microsoft silverlight will be possible to insall it. The problem is when I try to remove the old silverlight (add or remove programs) do not remove and displays this dialog box "the installation source for this product is not available. Verify that the source exists and that you can access. I like you would help me in this matter. Thank you very much. Manuel Ortega.

  Hello

  I recommend you to ask your question in the Microsoft's Silverlight Installation and Setup forum for better support.

• Uninstalling Silverlight gives "the installation source for this product is not available. Varify that the source exists and that you can access. »

  I can't remove Silverlight.

  I want to update to Silverlight. When I try to download, the download fails and I get a message to uninstall the old version.  When I try to do, I get a message that says "the installation source for this product is not available. Varify that the source exists and that you can access. »

  I have been in this situation and tried the solution here:

  "How to manually clean a broken Silverlight installation.

  Who has not completely worked for me, however, if I pulled upward from Regedit
  (Start-> Run-> 'Regedit')
  and searched the whole registry "Silverlight", deleting keys of parenthood which contain this string. (There was a large number of them).  When I did, I was finally able to reinstall Silverlight.

  Note that editing the registry is dangerous, so make sure that you first create a backup of the registry and know how to restore it in case things go very wrong.
  "How do back up and restore the registry in Windows XP"
    <>http://support.Microsoft.com/kb/322756 >

  HTH,
  JW

• The installation source for this product is not available. The product is Adobe Professional 8

  I can't remove Adobe Professional using Add/Remove programs. I get the following error message

  "The installation source for this product is not available. Verify that the source exists and you can access it.

  Try here: http://kb2.adobe.com/cps/400/kb400723.html

  John