Source of FDM adapters

Similar Questions

• ERPi and FDM for 11.1.2.2 - adapter Source?

  Hi all

  Could you please help with the following questions concerning the ERPi and FDM for 11.1.2.2

  1. in general, what is a source adapter used for?

  2 in FDM installation package, there is an adapter (ERPI-END-E) for the ERP Integrator.
  I would like to clarify if my interpretation below is correct or not.
  My understanding is that this adapter allows automation of the ERPi data the performance rules of load in the application of FDM, which means that we can launch start the ERPi of planned work of FDM data loading State.

  Thanks a lot for your help.

  Hello

  1 Classic source FDM adapters are used to import data from the source system native support (EBS, SAP, ERPI) instead of files or databases. Let´s say that in some how the extraction process is already packed so you can extract the source system that the adapter don't

  2. you are right, ERPI is a product of the transition between the classical FDM and FDMEE (11.1.2.3), there are some features missing in ERPI FDM. Therefore, you had to use a mixture of ERPI and FDM in order to get full functionality. You use ERPI to extract the data and FDM to treat it (scripts, validation intersection report, etc.).

  11.1.2.3, gap is still smaller than that now we have scripts, report of validation of intersection and other features in FDMEE 11.1.2.3 (re-branded ERPI). The classic source of the FDM adapter still exists.

  In 11.1.2.4, as classical FDM is not available more-> no adapter source more :-)

  Hope that helps

  akafdmee.blogspot.com

  @akafdmee

• queries in FDM

  Hi, this is arvind, I have a few questions for FDM
  Q1. What is the difference between FM9i-G4 - A.xml and FM2.9i - G4 - B.xml adapters?
  
  Q2. If we have the same .dll file to register for both the PCI and the cards normal, if not, then where we
  able to find the file .dll for PCI adapters?
  
  Q3. When we are forced to import from the source of the adapters?
  
  Q4. You can specify any 10 reasons why a company should go to HFM impementation.
  
  Q5. What are the benefits of HFM on Excel.

  Hello Arvind,

  Answers to your questions:

  FM9i-G4-1a is the first version of the adapter for the 9.3.1 intercompany series.
  FM9i-G4-B is the second version of the ice for the 9.3.1 adapter series

  2. Yes. The same DLL is used for the intercompany adapter

  3. these aren't adapters 'source '. These are the target adapters. You import them after you create a new application that is required to integrate with HFM. Please see documentation of FDM posted the RTO for the procedure correct application/configuration

  4 N/A

  5 S/O

  Thank you

• Load the account with FDM ERPI

  Hello
  
  Is it possible to use the reconciliation account in the Source of FDM ERPI?
  
  I don't think but want to be sure.
  
  I use Oracle eBS R12, FDM ERPI 11.1.2 and Hyperion Planning 11.1.2.
  
  I have a hierarchy of GL account:
  Level 1: account
  Level 2: back
  for example:
  Income1
  Account A
  Account B
  Years2
  Account C
  
  I would like to have a map like:
  
  Source: Income 1; Target: 1 member
  Source: Income 2; Target: Member 2
  
  Thank you in advance for your help!
  
  Fanny

  Fanny,

  You cannot configure ERPI to provide parents of the segment values. Mappings for each account will be the only way to do it. Wild cards can make this easier, but it will still be a fair amount of work.

  Kind regards
  Matt

• 11.1.2.1 in 11.1.2.3 Classic migration - Import/Export

  Hello all -

  I exported my 11.1.2.1 .xml file and tried to import into my application of FDM Classic 11.1.2.3 through the Workbench.  I received an error message:

  "3108 selected XML file is based on an old level of schema (1112100).  A scheme (1112300) or higher is required for this version of FDM. »

  The schema upgrade tool seemed to want to just update my application of FDM - there - there a trick to getting the. XML in the correct import form?

  Thank you

  Sarah

  
  

  You cannot import a lower level XML schema in a higher level DB schema.

  To migrate your application FDM 11.1.2.1. you will need to use to add the 11.1.2.1 request to the 11.1.2.3 enviornment and then run the schema update utility to upgrade the 11.1.2.1 database application of the 11.1.2.3 level schema.

  If you are using Oracle:

  1. Use the Oracle database utilities to perform an excerpt of the Oracle user schema in the Source of FDM environment in a .dmp file.
  2. Copy the .dmp environmental source above the FDM 11.1.2.3 Oracle Database Server environment.
  3. In the target environment, create a new schema/user Oracle for the database of the FDM application and corresponding storage that exist in the source Oracle database server environment. * Please see Guide DBA recommended FDM Hyperion for more information on storage space and settings for the Oracle database.  This guide is available on the Oracle Technology Network.
     
  4. Use the Oracle database utilities to import the .dmp since the environment of the source file in the schema user newly generated in the 11 x Oracle database environment. * Note: this process must be performed by the Oracle database administrator.

  Step #2: Copy the application directory of FDM since environmental Source FDM on FDM 11.1.2.3 environment.

  1. Launch the Client of Workbench FDM in FDM source environment and choose in the application.  Connect on the Workbench as a power user.
  2. A list of FDM applications will be returned. Highlight the application that is being migrated in the environment 11 x, and then choose Edit
  3. The path of the Application is displayed. The part that stores the directories of the application of FDM (\\servername\sharename\appname) must be copied to the 11.1.2.3 environment.
  4. Share application of FDM in the 11.1.2.3 environment allowing the FDM service fully share account and the NTFS permissions in the directory.

  Step #3: Add the Application to the 11.1.2.3 environment

  1. In the 11.1.2.3 environment launch the established client and choose
  2. Connect on the Workbench with a user of the application of FDM that was migrated. The user must be a user who could connect to the previous s environment application.
  3. Click on the Add button when the screen of the application is returned.
  4. Fill in the data base of the screen, add an Application and general tabs

  General tab:
  (i) name: name of the FDM application. This must match the name of the folder of the application within the part of the application. (i.e. \\servername\share\app1) would app1 informed in this area.
  (II) description: if necessary application FDM description
  (III) app Path: UNC path to the directory copied the application (i.e. \\servername\share\appname)
  (IV) group app: select the Group of application of fdm in the drop created in shared services

  Database tab:
  (i) select the OLE DB provider that is appropriate in the drop-down list. OLEDB. ORACLE for Oracle or SQLOLEDB databases for SQL Server databases.

  
  (II) service: enter the name of the Oracle Service for the environment 11 x Oracle database that contains the schema of Application FDM that was imported
  Database server: name of the Microsoft SQL Server database server for the x 11 environment
  Database Name: Application name database that has been restored in the environment 11 x of FDM
  (III) user/schema: Oracle database schema in x 11 environment this .dmp file has been imported.
  Password: password of the Oracle schema/user

  Step #4: Use Schema Update Utility to update database from the Application of the 11.1.2.3 schema level

  1. Choose Start > programs > Oracle EPM system > Management of the quality of financial data > Workbench > update schema
  2. Choose the Application that has been upsized in the drop-down list of the applications and connect with native user was created in the services shared and used to add the application. Appear in a new screen showing the name of the application and the level of current schema. Click Run to update the database from the application of the 11.1.2.3 level schema.

• No [ups] don't rank file name!

  Hi all
  
  When I was importing the source of fdm data, I encounter this error.
  
  Error: An error occurred importing the file.
  Detail: No [ups] don't rank file name!
  
  I usually never encounter this error.
  Can someone explain what this means?
  
  Thank you.

  FDM imports of excellent files using a named range that begins with "UPS" (which means upstream)

  The first cell in the named range is the table in which the data will be imported. The following ranks, it's the fields in the table and line 3-n are data records.

  I would you recommend to import data directly from excel, unless you use the FDM journal feature. FDM workflow process optimizes the process of importing data using a temporary table. If you were to write the data directly into the table, you would be around this key application functionality.

• With FDM/ERPi of Oracle Data Source incremental data loads

  Hello
  
  I use ERPi 11.1.2.1. In the workspace, it is possible to set the option of the rule of the data load to be instant, or incremental. However, I use FDM/ERPi set to load data from Oracle GL in Essbase. Is it possible for me to put in place the FDM for the data to load incremental data rules charges? Could be a parameter in the source ERPi adapter?
  
  Thanks for any information you could provide.

  Yes, the source ERPi adapter there is an option for "Method of Load Data" that will allow you to define how the rule of the DL is run. By default, it is "FULL REFRESH" but can be changed.

  (A) connecting to the application via the workbench and the source system adapters
  (B) make a right click on the Source ERPI adapter and choose "options".

  You will see an option to load method and it will be the full refresh value, choose the value of the option you want in the menu drop-down and save.

• Import FDM: create unique chartfield 4 fields in the source file

  Hi Experts,

  In my requirement, I have only one Member to the Source file that I divide it into 4 electro-regulateurs (target size)

  '1234 44 55555 456' ex, this string must be "1234" "44" "55555" "456" to represent the members of dimension 4 in Essbase.

  I tried puttig following the FDM code in a script to import through format to import for one of the target field, but after that I imported this column showing "lack of field" error. Any suggestion please?

  ' Declare local variables
  Dim lngStartPositionMid
  Dim lngCharCountMid
  Dim strValueMid
  
  ' Get Mid N characters
  lngStartPositionMid = 9
  lngCharCountMid = 5

  ' Get the string
  strValueMid = Mid (strField, lngStartPositionMid, lngCharCountMid)

  
  End Function

  Thank you

  To do this.

  I'm new on FDM and VB so realized it later that in fact, Script name is the name of VB Functiona and that is where the value should be returned.

  If my scrip tNom is entity

  Entity = Mid (strField, 9, 5)

  Thank you

  Vivek

• FDM to connect to a relational source and target

  I'm new to this tool. I have a few basic questions. I based my research, but could not find a clear answer.

  Can I connect to a relational table as source and target for an application of FDM. Relational source isn't eBS or other applications, just a relational table. I would like to load the same data from a relational table to another table using FDM. I'm looking at the wrong tool? Should which adapter I use? ERPI source adapter is? Which adapter target?

  Can someone please you suggest? Thanks in advance.

  Hello

  If you're new to this tool, you should know that FDM won't 11.1.2.4.

  It is replaced by FDMEE which is already available in 11.1.2.3.

  In all cases, you can extract data from relational db by using a script of integration. FDM doesn't load data to a target database not Hyperion EPM but you he could get it works using the custom script.

  Concerning

• Where can I find adapters of FDM to download

  Hi all!!
  
  I installed and deployed FDM 11.1.2.2 in a Windows 2008 Server and now I'm trying to make it work, but in the "* Oracle Hyperion Financial Data quality management Configuration Guide *" indicates that you need to download the integration adapters and set them on the folder:
  
  < oracle Home > / Middleware/EPMSystem11R1/products/FinancialDataQuality/adapters
  
  But the question is: where can find these integration adapters to download?
  
  I can't find anything about the delivery of the Oracle web page.
  
  Anyone know who?
  
  
  Thanks in advance
  Regrads

  You have installed the 32-bit client, have you updated the tnsnames.ora for client 32-bit with database information.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• FDM App Migration 9.3.1 to 11.1.2.1 adapters

  Hi all
  
  We have migrated the FDM 9.3.1 to 11.1.2.1 successfully app...
  
  9.3.1 adapters are also migrated... we have imported V11.1.2.1 adapters... do we need to eliminate adapters v9 and config with adapters v11... or can we use the v 9 adapters

  9.3.1 adapters are not compaible with FDM 11.1.2.1, remove and reconfigure.

• FDM 11.1.2 logfiles of the Outbox when source files are imported

  Hi all
  
  In the FDM Outbox folder contains log files (* .err) that are created when the source files are imported.
  The log file must contain rows of data that did not import of FDM and an explanation of each line has not imported whey.
  But in my log file contains only the first line of the error, when I fix the line that was wrong and rerun the process.
  appears the next Member that does not exist.
  I want to appear the first time, all members decreased from hyperion planning in my log file.
  
  Anyone has an idea on what I need to do?
  
  Thanks in advance!

  This is because when you use the standard FDM support i.e. load the API in action script it records all errors (improvement needed). The easiest way to get what you want is the option enable the setting of load chain and use a rule of load to load the data instead of using the load of the API. When you use a rule to load your file errors contains all errors associated with the charge.

• Integration with OLAP Source FDM script

  FDM has the ability to extract data from a system of OLAP source such an Essbase cube? Looking at guides and more specifically the example script of integration, it is oriented to relational backend. I know by nature, is not what I am asking, so the issue is with the case any script is this possible at all?
  
  Thanks to you all

  You can write a script that will run a script to calc dataexport but he is not a native import script or source adapter for it.

• Validation of FDM rule with aggregate data source?

  Hi all
  
  I want to create a validation rule showing a report with totals of the data loaded by entity.
  
  I was able to retrieve the data from the target (|), system data source (~ ~) and converted the data (""), but I can only retrieve specific rows for the source and the converted data.
  
  Has anyone got a sollution to recover more source (Associate Professor) level and / or converted data?
  
  So I would recover all of the loaded data as shown in the screen dynamically import.
  
  Thanks in advance,
  
  Marc

  Since FDM has no hierarchies as HFM/planning, so for calculated retriving data you can to create accounts of logic, with the same logic of calculation as in a hierarchical structure of HFM / Planning. Then, this can be used in the validation rule.

  Varun

• HFM as a Source and a target in a single application of FDM

  Y at - it an adapter for FDM 9.3.1 that enables FDM to connect to HFM as a source and a target? What I want to do is to create an automated process to extract data from an application of HFM, re - map these data and load it into a second HFM application.

  Hello

  Unfortunately it is not. FDM views HFM/Essbase/Planning/Enterprise as target systems only.
  There might be a way to do it through scripts / api... but nothing out of the box.

  Thank you