Source of voltage controlled blow - once

Similar Questions

• Analog voltage control

  Hello

  I'm looking for different options for controlling an electronic valve. Order entry is the electronic voltage between 0-10 Volt signal and I need accuracy of 0.1 Volts. Is it possible to get a digital output on the computer (such as USB) and convert it into an analog signal within the corresponding range through the use of the products OR commercially available?

  Best,

  Sertan.

  Hi Sertan,

  If you are looking for a specific product range, it seems that our M-series products will provide your desired features: USB, +/-10V output analog and a higher accuracy you need.  Nice day!

  Powered by the bus M Series DAQ Multifunction for the USB - 16-bit, 400 kech. / s, up to 32 inputs analogue, Iso...

• Visual Source Safe or control code Source of RoboHelp

  I've never used a VSS, but I used the control code Source HR. I can't find that clear cut answer to my current question. All features as securing help based on the roles of security defined by the company, help merge and several authors by project/topic even work in VSS or it is just a feature of control code Source HR?

  My current client has VSS and I don't know that they would like to buy HR Source code control, unless I come here with a very good reason for that.

  Hi, MeWrite, and Rick

  MeWrite contacted me directly, and I thought that I would pass it along my answer to his questions that might be useful to other people who can come to this topic later.

  It is true that many of the features of the mentions of Rick (reports of merger, search and structuring from Google Analytics) could create a * similar * RoboHelp Server 8 experience. However, there are many distinct advantages using the HR Server 8. After all, several companies, universities and health organizations I've worked with would not be pay for this option and continue the upgrade over the years, if they did not find value in it. I will try to describe the differences.

  1. Unlike the typical "log analyzers", produced by RoboHelp Server especially feedback reports meet the needs of authors willing to continually improve their content based on feedback from the end user. For example, web log (and services such as Google Analytics) analysers have been around for years. But Google Analytics cannot provide a parallel report of "Unanswered Questions" of RoboHelp Server just as an example.
     This is because the HR Server uses a database for collect words verbatim that are typed in the search field. Thus it provides not only comments on which keywords are searched. More importantly, she even keeps track of the research you present no result!
  
  The author can then use it to create new content to fill the void. They can also detect the misspellings or words that are different from the text of the topic. Knowing this, the author can create a synonym for the word often misspelled that takes the end user to the appropriate heading. In addition, they can create synonyms, to create new topics or to change the content to consider looking for the end user.
• RoboHelp Server 8 provides a technique of single source called 'Zones' that allow authors to publish on the same project for discreet audiences. Authors may also designate these areas as 'protected' so that access can be limited to groups of people based on the name of user and password authentication. These areas are as separate sites and yet all are under the same individual license.
• There are also improved search functions which go far beyond the ordinary search client that is used in the WebHelp non-server-side (for example, the characters generic, etc. too numerous to list here)
• All administrative actions for the server is a web application that is very easy for the author to use without being dependent on a web administrator to intervene (authors really like this independence!) If the admin team chooses, reports can be generated and considered by experts in the field and others who do not even use RoboHelp!
• Unlike some competitors, RoboHelp Server can be configured with or without MS Windows Internet Information Services (IIS) if it is HIS preference. It's because it works with the free, open source server Apache Tomcat and Apache Lucene search engine.

Just in the last 6 weeks, I helped 4 customers install and configure RoboHelp Server and train on the client of RoboHelp for organizations, ranging from Fortune 500 companies to major universities and they enjoyed the added features of RoboHelp Server. Of course for some organizations, these features are not necessary and good ol' ' WebHelp may suffice. Regardless, it deserves a second look.

I hope this helps.
John

John Daigle
Adobe Certified RoboHelp and Captivate instructor
Evergreen, Colorado
www.showmethedemo.com

• How to create the ampere control signal (4-20 my) of the voltage control signal (- 10 - 10 V)

  I must control 4 proportional valves (Bürkert 2873 x 3 & 2875 x 1) installed on a gas pipeline. These type of valve control signal is 4-20 my. I have a data acquisition NI USB - 6343 with 4 AOs of V-10-10 X. How can I control these valves with the DAQ hardware? I am not familiar with ELECTRIC/ELECTRONIC, that is why I ask. Thanks in advance.

  This device can produce only 5mA on the analog output.  So, you will need an op amp that can display on your 20mA.  See here for the creation of a converter with an op-amp circuit.  Your USB-6343 should provide 1 to 5V to the op-amp.

• controlled source of tension shot

  Hello

  can someone explain to me how the source voltage controlled shot (how can I trigger by a DC voltage). I would really appreciate it

  Thanks in advance

  I discovered how to use it.

• RoboHelp 9 with control code Source PushOK

  We have recently improved our win7 64 bit machines. I have the process, we have also been updating Robohelp 7 to 9.  On our previous machines, we used Robosource 3.1 as the source control.

  We have a major project in Robohelp and I copied the files on my new machine and opened it in RH9. He converted to the course without problem and seems to work well.

  However, when I try to add the project to the code Source of PushOk control, he will not see PushOk and offers only 3.1 SR.  I followed the directions to find here of Aditi Roongta to install robohelp_subversion.  I checked that PushOK SVNSCC plugin is listed in the registry as a SCC provider installed. In fact, it is the only supplier of the source in the register control.

  So my questions: why my project RH9 keeps suggesting only SR 3.1 when it is not yet installed on my computer? How to remove 3.1 RS and, he can recognize the PushOK?

  Hello

  Seems that you have installed the PushOk SVN 64-bit Installer. You must install install 32 bits of PushOk SVN to integrate with RoboHelp. Once you install it on a 64-bit machine, you will see the entrance to registry HKLM > SOFTWARE > Wow6432Node > SourcecodeControlProvider > InstalledSCCProviders.

  Similarly, if RoboSource Control is installed on your machine, its registry entry will be displayed in the above registry location.

  Please let us know your results.

  Thank you

  Aditi Roongta

• HP Officejet Pro 6830 E3E02A: HP Officejet Pro 6830 scan via web control panel

  Hello, I just bought the printer, and I tried to configure the analysis via the web control panel.

  When I tried to scan, I got the message:

  "You can't use this feature because it has been disabled. For more information, contact your network administrator or the person who set up the printer. »

  Given that I'm the one who created the printer and I am the network administrator in my house, there is not one that I can talk to

  I tried to find permissions in the printer itself, but I couldn't find anything.

  Can you help me configure the scanning to any computer that connects to the control panel (only designed connected to the wifi can do anyway is safe)

  Thanks, Lidor

  Hello

  Please specify what you are looking for to WebScan.

  Here is the procedure to activate Webscan (you are almost there to implement!),

  First, we assume that your printer is installed over the network (whether via a wireless or Ethernet connection)

  1. Go to your printer and to determine the IP address of the printer for example 15.37.213.128
  2. The priner key IP address in your Internet Explorer browser
  3. Go to sweep, there should be an option Webscan. If it says "you cannot use this function...". ", you will need to enable it.
  4. Activation of the Webscan: Click on 'Settings' > 'Security' > 'Administrator settings' (simply 'continue' if there are any warnings about certificates, you may need to click on "Advanced" to continue)
  5. Under 'Settings administrator', it should be a "Webscan' option, be sure to what is"checked"and"Apply"or"Save"your settings.
  6. Go back to perform a scan and you should be able to see the Scan options. Select "Document Source" to be "ADF", PDF "Type of Document' and 'start scanning '! (You can also select "Document Source" to be "JPEG")
  7. Once scanning is complete, right-click and save your file in the destination of your choice.

  Here is a relevant video showing how Webscan is done, you are right in saying Webscan can be used in any OS, the video example uses Chrome for example:

  Scanning from Chromebook

  https://goo.GL/fH4F1R

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• How can I get rid of multiples (same thing listed 3 to 4 times) in my control panel "Classic view."

  When I go into my control panel "Classic view" things appear too often, just after, below, on the other (and I can not delete additional ones)

  Examples: "Accessibility Options" is listed FOUR times in a row.

  "Add Hardware" is mentioned THREE times

  Then "Add or Remove Programs" is listed TWICE

  Oddly, the following list is "Administrative Tools" and it appears only ONCE! (As it should be)

  The following list is "Automatic updates" and it is listed SIX times!

  Curiously once again, the following inscription "Data Sources" is only registered correctly, ONCE (as it should)

  Return to chaos, the following inscription "Date and time" appears FOUR TIMES

  And these strange, random, multiple registrations continue at the bottom of list 'Classic view' on my control panel.

  What should do?

  Hi Saratonin,

  -Did you of recent changes made to your computer before this problem?

  -Have you run an anti-virus program to check if it helps fix the problem? If not, run the same and check if it helps fix the problem.

  I would also recommend to start safe mode and check if the same behavior is noticed there too.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  See this link for more information about starting in safe mode:

  A description of the options to start in Windows XP Mode

• HR 11 cmd line: error: impossible to analyze all project files.  Unexpected error: failed to prepare a single source

  Hello

  I am running RH (installed in Program Files x 86) 11 on a Win 7 (64-bit) machine.  I just created a new project with a lot of folders/subfolders and a single topic welcome.  This project compiles fine using the RoboHelp interface.  However, when I run RHCL from the command prompt, it refuses to start.

  Here are the details of the order and the results:

  from c:\Program Files (x 86) \Adobe\Adobe RoboHelp 11\RoboHTML

  c:\Program Files (x 86) \Adobe\Adobe RoboHelp 11\RoboHTML > rhcl 'c:\knowledgecenter\knowledgecenter.xpj'-l 'WebHelp '.

  Adobe (R) RoboHelp version 11.0.4.291 Project command line compiler

  Copyright (C) 2006-2007 Adobe Systems Incorporated and its licensors. All rights reserved.

  Project: c:\knowledgecenter\knowledgecenter.xpj

  Layout: WebHelp.

  Output:! SSL!\WebHelp\Index.htm

  Scanning for the compilation project...

  Error: Impossible to analyze all project files.  Please use RoboHelp to recover the project.

  Unexpected error: failed to prepare the data of the single source for RHCL. Please try to compile in RoboHtml.

  I tried deleting the cpd and the project from the hhp file - has not made a difference.

  Help!

  Thanks in advance,

  Claudia

  Thank you.  What I discovered yesterday, it was that after the project SVN on my local machine to test the command line build process, somehow some of the FPJs was missing!  Because the folders containing the missing FPJs were empty, I guess GUI HR could ignore and compile correctly.  It turns out that I have somehow missed tried all FPJs in source control.  Once I got all the archived FPJs, when I refresh svn at the local level, the construction of the command line worked well.

  Kind regards

  Claudia

• shutters control home automation

  I want to renovate my metal, electric shutters.  at the present time, I have a button for opening and closing on the wall.  I am in a country of 220 volts.

  Does anyone know of a remotely controllable rehabilitation project (through it Mac?) switching system?

  Thank you.  (hope this is the right forum to post this)

  There are several different home automation standards.

  • Apple HomeKit - then that controlled by Apple is open for use by other manufacturers
  • Z - Wave - independent standard
  • ZigBee - mainly used to control the lights
  • ioHomeControl - rare
  • X 10-very old travels the power cables

  and then there are some owners including systems

  • Crestron
  • Control4
  • Samsung Smarthings
  • INSTEON

  which can be linked to various other products

  There is Mac software for some of them and iOS apps for most of them. From a perspective of Mac, take a look at https://www.indigodomo.com/

  But, you are probably better off watching iOS apps, you might even wall mount an iPad and use it as a controller. You could also use an open-source solution and control via a web browser, some people do with a Pi raspberry running Linux and equipped with a software module and Z-Wave as a OpenHAB race.

  I look at using Samsung Smartthings to control various other systems, Smartthings as standard can control Z-Wave and Zigbee devices. There are several controllers for wheelchairs/roller shutters using the Z-Wave standard, which means that you can use one of people with Smartthings. Also from Indigo supports both the Z-Wave he too could control a rolling Z-Wave/component.

  Note: Z-Wave uses radio frequencies different in the USA vs Europe so make sure you get the right products for your location.

• Delays in parental controls do not work

  Each of my children have a managed user account. Parental control is on and deadlines are given 30 minutes a day. But deadlines do not work. They have an unlimited period. I tried turning Parental control market once again, tried to change the time limits, nothing is done. Is there some bad file cache or configuration, the origin of the problem?

  BUMP

  Someone has an idea?

• controls change size Installer

  I have an executable that has Boolean commands with images. Some of these controls distort once the application is installed on a different computer. This distortion also occurs with some of my other data structures and the result is that the well laid out GUI is distorted so badly that some controls are not usable. The application is fine on the computer where I made my development work. I am running Windows 7 64 bit it on all computers. I also note that it is a long-standing problem I've had since version 8.2 and up to 2012.

  If I remember correctly, the police affect it even if the text is not visible (no doubt because the visibility of the text can be controlled programmatically, then control calculates its original her size even if it is not visible).

  I suggest try to change all the text in a specific font and then create the EXE file and see if that helped.

• DAQmx how to control the level of tension AO paused for a relaxing break?

  I have an application where I need to generate a waveform of a fixed frequency (~ 200 kHz) and the amplitude, but for differing them burst lengths and different lengths of time between bursts. These bursts and these delays are controlled by a line of DIO to generate the relaxing break. I also need to have the output voltage analog voltage controlled between bursts of waveform. I explored using various trigger options, the break seems to be the best solution, but I'm difficult to control the particular point of the end of the waveform during the break occurs to make sure that the break is at the same specific voltage when the wave is hidden. I try to adjust the position of the example 'Analog output Pause for the periodic Signal with regeneration on specimen' but cannot get regular tension during the break I'm after. I use a card Series DAQ. X is there a simple way to pre-set the tension that will be broadcast during the paused state when using a relaxing break? I was not able to find it in the examples or documents. I can't use the code of reference AO set example because it is a software-driven and does not fit into the model of schedule I need to generate.

  Hello

  I don't think there is a way to establish a certain level on the analog output, based on a relaxing break.  I watch using a redeclenchables task analog output and do every hour of beginning to the required voltage.

• Change the tab order of controls installation changes

  Hello

  When designing my UIR for a new project, I realized that when I use the function "change the controls' to change the attributes of several controls at once, the tab order changes.

  I noticed that, because the constants of the UIR are essential for my application and they are changed automatically in the header file according to the tab order.

  If I change the attributes one by one, then the tab order is preserved.

  Is it really a bug or am I missing a point here?

  (I'm with CVI 8.5.1)

  Thank you for the provision of the UIR and for reporting this bug. Unfortunately, it has been reported too late to get into the next version 9.0, but we will try to fix it in the maintenance release.

  -jared

• How to dynamically convert a control flag?

  Hi all

  I need to write an application that:

  (1) reads an array of strings from a file and display it on an indicator (and's done it correctly)

  (2) modify the table, as it was a

  (3) develop ropes (my table is a list of commands SPINNAKER, which are sent to an external device)

  (4) possibly, save the table updated back to a file

  How is that possible? It is not possible to think of a property node that converts the control indicator, because the indicator is connected to a data source and the control must be connected to a destination... (a pilot SPI in my case)

  I need sort of an element with both incoming and outgoing connections.

  Thank you

  Hello...

  Try to do it with a local variable of indicator... So, you will be able to use it as indicator and control...

  Just a thought...