SP3 will not install 0x8007F0CC

Installation of the SP3

Windows 2000 SP3, Windows XP SP3, Office SP3, or...?

Assuming WinXP SP3:

Error message when you try to install a service pack in Windows XP: "Windows has detected that one or more protected central system files (kernel) on your computer have been modified.
http://support.Microsoft.com/kb/327101 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Tags: Windows

Similar Questions

  • MSXML 4.0 sp3 will not install on windows vista 32-bit

    I am owner of a HTC Desire HD and as part of the package with the HTC sync software they require MSXML 4.0 SP3 must be installed. Setup extracts and installs until the 'product information' then he told me that an error occurred while installing (well words to that effect). Then I tried to download the software directly from yourself and the same failure occurs. Any ideas how to solve my problem? Thank you

    Hello

    I suggest that you follow the steps mentioned below and check if that helps.

    Step 1:

    I suggest you to check if the Windows Installer Service runs in the Services.msc window.
     
    a. Click Start; In the start search, type Services.msc and press to enter.
    b. right-click on Windows Installer and click on Start (only if the Service is stopped).

    Step 2:

    Put your computer in a clean boot State, and are trying to install. Start your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem.

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Step 3:

    Also follow the steps in the article.

    You cannot install some programs or updates

  • Windows XP SP3 will not install and repeatedly keep trying with Windows Update

    I've had two months of problems with Windows 7 and had to build a Windows XP machine. I installed Windows XP Pro SP2 on the clean machine and tried to install SP3 I had downloaded and put it on a CD. Installation backed up the existing files and install the new files. The installer said he was changing the registry. After that the installer said that there was an error, a file is not found. Then uninstalled and restored the old files. Keeps Windows Update downloaded a stream of updates (as you would expect with a clean install), but at the end of installation of the batch that is being updated is in SP3 update running. Whenever the SP3 update is executed, it gets to the same point, fails because it cannot find a file and UN-installs itself again. The indices of anyone? It's a real Microsoft Windows XP Pro out of the box, not an OEM.

    Hi guenoun,.

    The message I received installation of SP3 was "System cannot find the file requested" with no error code. As I was installing a SP3 at the start of a CDROM created from the uploaded image of CDROM I thought it was unlikely that the CDROM was corrupt or missing files. So, I went in Mode safe mode and use the account administrator. SP3 installed then OK (it took more time than installing Windows XP). I then checked the updates, and although Windows Update has been updated about 10 new updates flooded down. So problem solved. It must have been one of these security issues where be a user with administrative privalges was not enough.

    Kind regards
    Tony

  • 2007 Microsoft Office Suite Service Pack 3 (SP3) update will not install. code 80070663

    Will not install the 2007 Microsoft Office Suite Service Pack 3 (SP3) update. I get an error code: 'update code 80070663 Windows has encountered an error unknown. How can I fix?

    I tried Microsoft fix. It fixes something, but apparently not this problem...

    I use Windows Vista Enterprise SP2.
    I found something else with the same problem for windows XP (registry problem: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/error-code-80070663/869d5ea6-9892-4273-a43d-26ee4f42efe2). The same solution apply?
    Thanks in advance!
    Joeri

    Problem solved! The problem was the lack of free space on my C directory. The installation was successful, after that I deleted a program.

  • WinXP sp2 will not install sp3 for amd machine

    Hello.  I need help.  I'm fixing my computer compaq with sp2 amd 3200 and it will not install xpSP.  I've updated the utility with hp/compaq amd utility and nothing works.  I followed everything here for kb936929 and nothing works.  HELP >...

    Hi JernSuj,

    Please provide us with the information below:

    ·         What is the exact error that you receive when you try to install Service pack 3?

    Download Windows service pack 3 manually from the link below: Windows XP Service Pack 3 installation network for the IT professionals and developers Package:

    http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4

    The calculation of starting in safe mode and install service pack 3: a description of the options of the sure start in Windows XP Mode: http://support.microsoft.com/kb/315222

    Please return back with the results to help us solve problems.

    Another link can be found: how to obtain the latest Windows XP service pack: http://support.microsoft.com/kb/322389

    Thank you, and in what concerns:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • After recommending the bios update, hp dv6131od running xp pro sp3 will not load windows - is there a wa

    After installing an update of the bios recommended on the hp website my dv6131od running xp pro sp3 will not load windows

    Update does not seem to have problems - failure, lack of time for flash, backup, etc.

    boot sequence seems normal (finds it a bootable cd in the drive, etc.), but windows won't load in safe or other mode

    next steps?  is there a way to access the BIOS?

    Thank you

    There is a simple solution to this problem.  The HP Online Crash Analysis Team has finally responded to my email after 34 days.  I had given up hearing from them despite several requests to repeat.

    I had completely disassembled the laptop trying to find the bios setting the jumpers on the motherboard in response to an idea contained in one of the PM, I sent... all to nothing does not...

    OCAT told me to look in the BIOS under "system configuration" for the Native SATA support.  The last update of the BIOS resets this point 'activated', but that only works for Vista & Win 7.  This must be set to "disabled" for XP and previous operating system.

    I hope that this post will save someone having to wait 5 weeks invest hours of work for a solution that took 3 minutes!

  • File Manager XP PRO SP3 will not recognize USB floppy A: drive

    File Manager XP PRO SP3 will not recognize USB floppy A: drive

    The system tray alerts "new hardware found" and "installed".

    In the system. material | Device Manager | floppy drives, the disk is present, activated and works

    If I pay BACK the drive is located and can be read and written.

    The drive is not the case in (windows explorerer file manager.

    The drive is not present in administrative tools. computer management | storage | removalable storage | libraries.

    In the removable storage service is started.

    If bottom line, the usb floppy is a material recognized, works under DOS, but there is no access to XP.

    This happens with two floppies different usb connected directly to a laptop (not a hub). When connecting to another XP computer, the disks are immediately recognized in the file manager and work as expected.

    Any ideas?

    It's embarrassing, BUT I solved the problem by using TweakIU. It seems that in the workstation. The floppy drives were not verified. Verification of A & B readers did the trick.

  • I have a 2008 iMac - how do Yosemite or El Capitan.  Sierra will not install.

    I have a 2008 iMac - how do Yosemite or El Capitan.  Sierra will not install (I want either the hack).

    I never 'got' Yosemite or El Capitan when they were available on the Mac App Store.

    The only way I've found is to get it on Apple's developer site, but I'm not a developer.  Apple how to flip the switch to the Mac App Store so that it shows up on top of my list?

    On this iMac, you should still be able to download El Capitan:

    Update of OS X El Capitan - Apple Support

  • Airport utility will not install

    When I try to install AirPort Utility on my iMac running OS X El Capitan 10.11.6

    I get the following message;

    AirPort utility cannot be installed to this disk.

    The version of Mac OS X on this volume is not supported.

    could you please help.

    concerning

    Stephen

    OS X El Capitan is already bundled with AirPort Utility v6.x. It seems that you try to install the older v5.x for the utility. Unfortunately, this older version will not install on later versions of OS X.

    If you require administer an older 802.11 g AirPort access point you will need a Mac running OS X Lion or earlier or a Windows XP or 7 PC.

  • The extension I created will not install for testing. He always says not compatible with Firefox 23.0.1.

    I'm wearing an extension of Chrome to Firefox. The extension is called The Unofficial Openstudy App and is found on the Chrome Web Store. I have all ready for testing, but it will not install the XPI file. It is said that 'no compatible with Firefox 23.0.1.' I tried to change the minversion and maxversion in install.rdf file, but it DOES NOT WORK. Why is this?

    Connection to xpi:
    http://www.fast-files.com/GetFile.aspx?file=65730

    Content of the install.rdf file for those who do not wish to download:

    <?xml version="1.0" encoding="UTF-8"?>
    <RDF xmlns="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:em="http://www.mozilla.org/2004/em-rdf#">
      <Description about="urn:mozilla:install-manifest">
        <em:id>[email protected]</em:id>
        <em:type>2</em:type>
        <em:name>The Unofficial OpenStudy App (TUOSA)</em:name>
        <em:version>4</em:version>
        <em:creator>dumbsearch</em:creator>
        <em:contributor>Emoticon</em:contributor>
        <em:description>The Unofficial OpenStudy App (TUOSA) is a Firefox extension that extends and enhances the current functionality of OpenStudy.</em:description>
        <em:optionsURL>chrome://tuosa/content/options.xul</em:optionsURL>
     <em:iconURL>chrome://tuosa/skin/icon.png</em:iconURL>
    
     <!-- Firefox -->
     <em:targetApplication>
       <Description>
      <em:id>com.dumbsearch.tuosa</em:id> <!-- Firefox -->
      <em:minVersion>16.0</em:minVersion>
      <em:maxVersion>25.0</em:maxVersion>
       </Description>
     </em:targetApplication>
      </Description>
    </RDF>

    you need to replace

    com.dumbsearch.tuosa
    

    with the guid fixed for firefox:

    {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
    

    https://developer.Mozilla.org/en-us/docs/Install_Manifests#targetApplication

    https://addons.Mozilla.org/en-us/Firefox/pages/appversions/

  • iPad Pro will not install the last update of iOS, says that it is not connected to the Internet. It is connected!

    MY iPad pro(9x7) will not install the last update of iOS. I get the message it is not connected to the Internet, but it is connected! I have f

    I istalled the update on my iPhone 6 without Ant problem. I tried switching off and on again, but the result is the same, it will not be installed.

    I just read a post that Apple released the 9.3.2 update for iPad 9.7 Pro. Cannot confirm this, but not me. See post by Phil.

    iPadPro9.7 said that current operating system 9.3.1 will not update 9.3.2

  • envy5530E will not install drivers win7

    I 5530th DESIRE which will not install the driver on a gateway computer that has been upgraded to Windows 7 32 bit Vista. I applied the patch to the tha, but it almost always fails at the end, and then cancel the whole installation. There is no error message or the displayed codes. Need a boost in a certain direction.

    I had to do a system reinstall to correct the problems of som with an analysis of the file system, and then everything worked correctly.

    Thanks for the help.

  • Envy Notebook M6: M6 Notebook Envy will not install updates

    Hello

    My laptop will not install updates. He will get all the way to the end and then will say that he was unable to complete the updates. He then proceeds to uninstall and even repeats the process. I need help! Thank you!!

    Hi @Ashmeister,

    It was my mistake, I have worked with many customers Windows 10.

    Try to follow the step of Microsoft solve problems with installing updates

    I hope this helps.

  • 3.6.8 patch will not install. Message says that it cannot find liscense... .view homepage. What can I do? Using XP version 3.6.7

    3.6.8 patch will not install. Message says that it cannot find liscense... .view homepage. What can I do? I use XP and Firefox version 3.6.7

    This has happened

    Each time Firefox opened

    Is since mid-July

    Do a clean reinstall and download a new copy of Firefox since http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.
    It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

    You can skip the step to create a new profile, which is not required on this issue.
    .....
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Installation of HP will not install on Windows 7

    HP 3210 all-in-one will not install on win 7 all your solutions have me chasing my tail for about 2 days... Please help

    Mike Garrotto

    It is a forum for users of peer-to-peer supported. HP maintains no official presence in this forum.

    When you request support, please provide the HP model name and/or product full number of the material in question. In addition, please provide brand and full model name or number of the computer used. Also indicate what you're trying to do and how the equipment is connected between them.

    Please send Bravo

Maybe you are looking for

  • T430 W7Pro: Solution Centre message said: Miss me the driver "qknfd".

    I am an exclamation point in the taskbar that brings me to the center of Lenovo's Solution, where I receive the message shown in the subject line. The buttons take me for Device Manager. I went through Device Manager and looked at all of the devices

  • How to remove a bad entry in the dictionary of mail

    I added a Word to the spell checker mail I wanted.  How can I remove it?

  • networking solutions

    I got a message from solutions of the problem windows update my network drivers. It is my understanding that if I don't have a personal computer, that I am not networking. can I disable the network adapters installed on my computer without doing any

  • BlackBerry smartphone email iconsYesterday,

    Yesterday, I had to reinstal my service books but for some reason, e-mail icons show I have unread emails (astrix playback) when the Inbox etc are empty. Any ideas.

  • Recommendation of controller

    Hello Is there a tool to determine if I have X number of access point that I have to use this controller model. So far, my requirement is to understand What model of controller supports up to 8 access points. The controller supports all models of the