SP4600 - processor operating at 100% and slow

Similar Questions

• Adobe Reader version 11.0.07 is cranking up my cpu to 100 and slow down my PDFs made any advise printing on this issue

  Hello

  I hope someone can help, I have problems with adobe reader, whenever I have open a multiple PDFs open my CPU goes to 100% usage and when I try to print something, the computer freezes.

  Once I end the process, the computer goes back to works fine

  I have adobe reader version 11.0.07.

  Thank you

  Post edited by: jay tronilo

  Is preferably next fall in security (protection)

• My computer is old and slow. What can I do?  I have a 4 GB 800 Mhz DDR2 SDRAM.  The processor is clocked at 2.66 Ghz Intel Core 2 Duo I Mac

  My I Mac computer is older than 6 years and became slower and slower.  I added the memory once in the past which has contributed to the speed.  He was clocked at 2.66 Ghz Intel Core 2 Duo for a processor and memory is 4 GB 800 Mhz DDR2 SDRAM.  I wonder if I it is better to buy more memory or if the computer needs to be replaced, it still works very well for email and working on small documents, but it is really slow and crashes when working with images and large files.  Any advice is welcome.

  I have a similar computer.   It will accept 6 GB of memory.   It is far from slow and Etrecheck reports he cited as excellent.   I think you have some unnecessary baggage in tow.   Why not download and do a report for us Etrecheck.   Publish it as an answer, here, and maybe we'll find the reasons...

• MsMpEng.exe running non-stop using 100% CPU and slow my computer down makes it difficult to use

  MsMp Eng.exe running non stop using 100% of cpu and slow my computer down makes it difficult to use, I just need a way to disable this program

  Hello Ian,

  Have you tried the Task Manager to end? Right-click on the taskbar and select Start Task Manager. Locate the application and click on end task (at the bottom of the page). I wonder if it's a piece of malware running, or even a virus. If it will not be closed, or starts just backup again, consider using these scanners:

  Malwarebytes': http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html .

  SuperAntiSpyware: http://download.cnet.com/SuperAntiSpyware-Free-Edition/3000-8022_4-10523889.html .

  ESET Online Scanner: http://www.eset.com/us/online-scanner/ .

  Keep me posted and let me know how you fare.

  Kind regards

  BearPup

• My 2013 series MacBook Air hot and slow or freezes when I'm on Facebook or Tumblr. In addition, the battery begins to drain. Why?

  Whenever I'm on Facebook or Tumblr, my MacBook freezes and runs hot and slow, eventually freezing. He also began to overheat, with maximum speed cooling fan and battery drainage. This only happens when I'm on these two sites since it rolls when they are not open. There is no problem in loading the computer or using other programs and Web sites.

  These issues have started only very recently, in the last week or so. What is strange is that for a number of programs or open tabs does not seem to cause problems, but once I open Facebook or Tumblr, the computer becomes overloaded (even if there are no other programs running outside of Safari and they are only two tabs open). Even YouTube does not cause the same effect.

  Help is very appreciated!

  MacBook Air (13 inch, mid 2013), OS X El Capitan (10.11.3)

  Hey there!

  What browser do you use? I had some problems of my own with Tumblr, Google Chrome, and power draining eventually led me to dump Chrome when I realized it was hogging all my resources. I recommend also to configure tumblr to show you your dashboard in the pages of 10 to 15 positions rather than scroll without end - in this way, he does try to keep everything loaded at the same time.

  You can also see your Mac activity monitor while you use these sites to get a better idea of how the power of the computer's processor and RAM are handling activity.

• My Qosmio G30 going slower and slower

  My G30 seems to get slower and slower - can anyone recommend procedures or software that can release to the top/optimize or accelerate my lap top.

  Thank you very much. Ron

  Hello Ron

  Can you please tell me what you mean exactly as slower and slower? Returns to the slow start or laptop computer runs slowly while you perform a certain operation?

• Y530 improved 8 GB of ram and slow as a turtle

  I just upgraded my Y530 between 2 to 4 GB * 2 GB * 2 PC3 10666. BIOS recognizes the Rams. Boot to vista 64, it is extremely slow. I have loooooog oooooon, after half an hour and CPU is at 100% all the time and the computer does not respond to clicks of the mouse or the keyboard. An hour after that I despaired trying to extinguish and hand pressed the power button. Now it is curropted my user profile. I know how to fix this, but everything works in slow motion at 1/100 and I can't do anything. I tried to log in with admin and the video driver crashes that I was clicking almost not fast enough to close the error dialog boxes and yes it is just too slow otherwise. Safe mode works very well. Win vista 64 reports 8 GB in safe mode. I searched for a while and found that I might need new bios so where I get it? All the lenovo are conductive. There is one asked earlier for the bios, but there is no update on this subject.

  My bios version is 10CN41WW (223)

  Is that what anyone has successfully improved Y530 8 GB?

  If anyone can help? Thank you!

  RAM slots support 4 gb max at a time, but when you try to use two slots of ram 4 GB, it will fail.

  try to use 4 + 2 instead, it should work without any problems.

• When I try to create a new e-mail in Windows Mail for Vista, the message box is delayed and slow to open.

  Hello, I have a laptop with Vista MS operating system and Windows Mail.  Since I got the computer, I noticed that when I go to create a new email, the new message box is delayed and slow to open.  And, often, once that I enter a contact in the line 'To', it also seems to be slow in filling.  No idea why this is happening.  The old OE always worked smoothly.  Thank you.

  original title: Windows Vista and Windows Mail

  Contacts are managed differently in Winmail in Vista and many can be what slows down things.  You can try to reduce them, and see if that has an effect any.

  See here for background information (www.oehelp.com/backup.aspx#wm), although it seems that the link to contacts has been removed.  See here for information on contacts: http://windows.microsoft.com/en-US/windows-vista/Managing-your-contacts

  Steve

• Aurora R4 fans operating at 100% after 10 Windows upgrade

  After upgrading my Aurora R4 for Windows 10 I suddenly after a week suddenly had problems with my control center and control of fans and lighting.

  When I turn on my Alienware fans go to 100% speed and stays there. No control of the fans in the command center, also not able to control them manually.

  Tried to reinstall the center of command several times. versions 3.5 and 3.6. Also tried the drain of power between UN-installing and installation. BIOS is A11.

  Summer contemplating the purchase of a new Council MIO but reading other messages I do not his failure as it seems that most of the issues related to the fans operating at 100% is related to the Windows upgrade 10. I tried running MIO diagnostic tools, but it will not work through the test.

  There is a blue light until then in left corner of the members of the IMU.

  My understanding is that the MIO card is connected via a USB port on the motherboard. What is problems with the origin of this problem USB driver?

  Does anyone know if Dell is working on a fix for this?

  Any help would be much appreciated!

  Thank you

  KO

  I have same exact problem on my R4 Aurora just upgraded to Windows 10.  I think it is a bug in the controller of Alienware Dell must fix as soon as possible (but probably will not fix soon, or never).  It is not your MIO Board, because many others have this same problem and I do not think that all these maps MIO just failed at the same time.

  I hope that Dell reads these forums because we do need a software fix for this.

  You can use a workaround and launch control center and go to the thermal control.  Adjust the fans from automatic to manual at a set speed or use the curve.  Then restart. It should pump fans several times on how to start and stop, but after starting the fans should settle.

  Also sleep no longer works on Windows 10 on the R4.  Put the PC to sleep works for a few minutes but he then wakes up and will not fall asleep.  Too bad Dell certified the R4 for windows 10 prematurely.  I would have never improved my Windows 7 Pro I knew all these problems existed.

• Quad processor running at 100% all the time

  An old friend has processor quad with 8 GB of ram, but its computer is almost unusable because the processors operate at 100% all the time.   She has more than 20 processes running (no application running. other than the Task Manager  System Idle is not one of the processes.  I ran Malware Bytes - did not help.  A process that takes 8-23% is ' ddazpfwlqwv.exe.  I can stop it, but it is immediately and I can't find anything about it.  I went into msconfig and disabled everything I felt comfortable making; but then again, no help.  In addition, she continues to pop-up windows ' security alert - your level of security does not allow this download unfold. "  These popups (up to 5 simultaneously) even appear when a download is in progress.  I fear that she has been affected by something that is trying to take over his computer.  Looking for suggestions.

  Cleve

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

  
  

  Please run the trace when you encounter the problem

• Fluidity in the mode of the image is not visible in the magnification of 100% and above.

  Fluidity in the mode of the image is not visible in the magnification of 100% and above.
  It is perfect between 25% and 66%. If I disable hardware acceleration, it works but slow. Does not work with the PSD, jpeg, 8 or 16-bit. I have reset the PS. He had worked in the morning and stopped work hours despite nothing happened: I have no install or remove any software. My PS is clean, I do not use any add-on or 3rd party filter.

  
  All tips are appreciated.

  Thank you
  Gabor

  2009 end iMac i7 16 GB of ram, ATI Radeon HD 4850, OSX 10.8.3

  https://www.dropbox.com/sh/zy5gqaj0nrpr2yz/ZxgT4DBKQx

  A Mac video card with 512 MB of vram is marginal. A 256 MB card enable GPU mode to liquefy to work at all, even on the small images. The smaller image work about only works in CPU mode, make a smaller selection just the part of the image you want to distort and then start fluidity in CPU mode using the down option. It will be slow but should work. Get a stronger video card (more vram) would be the best solution.

• Satellite U200 getting more slower and slower - 5 minutes to stop

  My U200 becomes slower and slower - 5 minutes to stop! and now it crashes when I try to install the drivers for "Cakewalk Sonar THE"- so I need help.

  I think I need to re - install Windows XP, however, I only got a "recovery disc" with the laptop - which will reformat my hard drive - there no way to reinstall xp without reformatting?

  If I have to reformat-how can I recover my Express Media Player & Norton Protection? -(I bought the laptop in January this year)

  HM, I think that you won´t get around this recovery thing, because I think your system may be heavy software problems.

  Regarding the Media Player and Norton: were they not installed as you bought this machine?

  Welcome them

• Close slowly in the night and slow start morning

  I'm having this problem and does not know what it is. Slow closed at night and slow start in the morning and using the capture software and screen illustrated space left. I don't see how to repair disk permissions if it is my problem can anyone help me I appreciate it.

  Thanks to you all.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• computer laptop HP compaq 6730 b freezes and slows down

  I have a laptop hp compaq 6730 b.

  Since a few days, I realized when I plug to charge my cell phone, it freezes finally and slows down.

  The CPU usage suddenly increases.

  What should I do?

  help please...

  Thank you

  It works ok with only the power adapter is plugged in and the battery out of the laptop? The battery charge ok if the laptop is turned off? The laptop works for a long time reasonable with just the battery?  I've seen this kind of problem with a Toshiba machine that used a NEC/CATHERINE 0E128 Proadlizer high switching frequency DC/DC Converter output capacitor.  I doubt that your computer has this chip but the problem and the function are similar.  It is a device surface and can cause the laptop to have a problem with the battery and the power adapter plugged in at the same time.  Many times this you will also charge the battery when the computer is turned off, but not when it is turned on. Sometimes it will not allow your to run Notepad with only the attached power adapter and the battery removed. Just to think.

• My imac seems to be running slower and slower.  What can I do to speed it up?

  My imac is running slower and slower.  What can I do to speed it up?

  Dale,

  Are you really still run 10.6.6 as indicated in your profile, it is important because it determines what to try next.