SPA-3102-backup/restore settings?

Similar Questions

• Backup/restore settings for SPA5x5 phones via browser how?

  Nice day

  I've seen this document before but can't find it now - basically, you point your browser to your phone and once logged on as Admin/advanced options let you save a file under and the MHT file has all the settings of your phone. Then when you need to restore these settings, you are supposed to do to change the MHT header to do something for her push the config on the phone...? Where can I find this please?

  See you soon

  John

  Hi John,.

  You can extract the configuration by going to http:///admin/spacfg.xml and record in a file.

  To repel the config for the phone (you need a server tftp or other service to host the config. Personally, I use solarwinds tftp free server):

  Through the web user interface: http:///admin/resync? tftp: / ///config.txt

  You can use the phone itself: setting button of the phone-> profile-> resync rule-> enter the path to the server tftp here

  For different phones, you will need to change the mac address of the device, or you can use $MA place. You will need to should not make any changes to the same phone.

  This is the complete commissioning guide:

  http://www.Cisco.com/en/us/docs/voice_ip_comm/csbpvga/ATA/Provisioning/Guide/Cisco_Small_Business_IP_Telephony_Provisioning_Guide.PDF

  Best,

  David

• Backup / restore settings in Photoshop

  As we all know, sometimes you just have to reformat the hard drive and reinstall the OS.  Is there a way to save on Photoshop (CS5) settings and preferences to restore them later after the BONES and the PS are reinstalled?

  Perhaps keps in some xml file somewhere?  Or a registry key?

  Thank you

  Stuart

  What operating system?

  Maybe this will help:

  http://helpx.Adobe.com/Photoshop/KB/preference-file-functions-names-locations.html

• Utility to backup/restore the BIOS settings?

  Somewhere is a tool available for Toshiba laptops to save and restore settings in the BIOS to use in a batch file?

  Thanks in advance

  Hi ERROR_403,

  Unfortunately this tools isn't available I think. I know that the BIOS update program creates a backup file if the update fails, but that s all.

  But why do you need such a tool? Normally it of not necessary to use such a tool

• backup/restore problems

  So, recently, my iPhone 6 had a lot of questions (most applications would be closed from the opening, I couldn't update apps, all the texts and iMessages disappeared, Messages turns uses a lot of storage despite the removal of all, etc.) and a person on one of these forums recommended to back up the phone, restore factory settings and then restore the backup to the phone. I got no problem with that, until I tried to restore the iTunes backup. When I try to do, I get the following message: "iTunes can't restore iPhone «...»» "because the backup was corrupt or not compatible with the iPhone, which is being restored. "I read that to solve this problem, I just need to delete the backup but the problem is that it's the only backup I had to restore my phone. Is there a way to recover this backup or is my only option again?

  Thank you in advance.

  It seems that the backup could have caused all the problems you had. Backup, restore factory settings and then restore the backup are a standard troubleshooting step, but if the backup is corrupt, you can not use and you can not get corrupted.

  You can restart all and try again, but I think that the results will be the same. You need to restore as new.

• I just got an iPhone 6 and when I plugged in my laptop, he asked if I wanted to restore my new phone. I said yes! But unfortunately chose the wrong backup restore with. Is there a way I can go back to how my phone was before?

  I just got an iPhone 6 and when I plugged in my laptop, he asked if I wanted to restore my new phone. I said yes! But unfortunately chose the wrong backup restore with. Is there a way I can go back to how my phone was before?

  Yes, you can as long as you understand that you will lose everything that is currently on the phone.

  (1) settings > General > reset > erase content and settings

  That will make the iPhone as new.  Then, during the installation process it again once will ask you if you want to restore from an existing backup.  You can then restore the scheduled backup.

• I could do a system backup/restore through the eRecovery without any additional software utility?

  I have an Acer Aspire One 532 H Netbook. I could do a system backup/restore through the eRecovery without any extra utility of Windows 7 to Acer recovery? If I have such software, how can I get it? Because my netbook not came with any utility recovery/program when I bought it. Need to respond as soon as POSSIBLE, my netbook is dying with the longer startup time and more.

  Nice day

  You must back up your data to an external HARD disk, etc. To reload your factory machine, click Start, all programs, acer erecovery management, restoration and completely restore the factory settings.

  Kind regards

  FReeZA

• change the backup/restore disc

  can I change this disk will my backup/restore point to? He uses my external drive now even if I didn't change it. I have a laptop & cannot bet that the external drive connects or is connected.

  HI RJHinSA,
  You can go there. This is guidance on how to change to the high places.
  If you need more information, simply open help, support and type "how to make the backup.
  Change when you save your files

  When you configure your computer to automatically back up files, you specify a location where the files will be stored. You can change this location if you run out of space in the current location or you want to change the type of storage location (for example, a DVD, a hard disk on your computer or a shared folder on another computer on a network).

  1. Click to open the backup center and restoration.

  2. Click on change settings.

  3. Click on modify backup settings and follow the steps in the wizard. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SPA-3102: unable to connect to the SIP server

  Hello

  We have a SPA-3102 installed and work properly in our US Office. We are trying to install another one in our office in India, but we cannot get this device to register with the SIP server.

  This device works perfectly when try us two different residences here in India with two different providers. But when we try to our office with a third party service provider, it is impossible to save.

  The internet connection at the office from the East through an ADSL router which is mode bridged with two IP static coming out of it. We are able to have access to the internet for our PC through this SPA-3102, but the SPA itself is unable to register with our SIP server. We use a Gizmo5 SIP server.

  The same parameters were working in our offices in the United States and two different residences in India but does not work in our office. I don't think that the ISP here has nothing to do with this problem. Would be - this works the ADSL router in bridge mode? Can I make changes in the settings of the SPA to work around this problem?

  Any help is appreciated.

  The problem could be the firewall or the router, but it is also possible that your Indian ISP is blocking voip connections.  It was reported that is not unknown in India.  Sometimes this type of blocking is done by throwing packages for voip standard sip signalling port 5060. You can easily change the SIP port in the SPA3102 to traffic returning to the SPA packages and in fact routers often changes the port without your knowledge, but packets destined for voip provider must use the port specified by the provider number.  Since you can access the internet with your pc, I would try to run tests to see if this is the case.

  I ran a few ping tests and tests to see if I could save with other providers or services that use replacing or other sip signaling ports.

• It is the restoration of the app "backup & Restore".

  Backup & restore app

  http://Forum.xda-developers.com/showthread.php?t=1193802

  or

  http://www.Elita-clan.com/downloads/backup_and_restore_v010935.APK

  http://www.Elita-clan.com/downloads/backup_and_restore_v010935.APKor
  http://www.mediafire.com/?1n07llajeaoo03y

  How to install it

  You must

  go to settings-> applications-> check unknown sources

  Download OI File Manager

  https://market.Android.com/details?ID=org.openintents.FileManager&feature=search_result

  Download application backup & restore, transfer to your SD card, use OI file manager to find-> tap on it-> install

  an even easier alternative

  Download the app, upload it to your SD card

  Download Apk Manager

  W251bGwsMSwxLDEsImNvbS5tYWdtYW1vYmlsZS5hcHAuYXBraW5zdGFsbGVyIl0.

  Open 'Apk Manager' and here select the applications that you wan't to install

  Let me make it simpler

  Download the apk on your computer, send it by e-mail, make sure that you send it to your Gmail

  now on your phone

  go to settings-> applications-> check unknown sources

  wait for the mail, once you get the message, open it, and instead of download the attachment it will install it, voila, done

• Failure to register SPA-3102 on "DSL-2750E" D-Link router

  Hi team

  I guess I'm able to clarify this here since its associated VOIP Cisco device. This SPA-3102 works fine with my old router. I wanted to have a WiFi router better and I installed D-Link router to "DSL - 2750th". Internet, everything works normally through this router but SPA3102 is does NOT record. I have a debug trace attached SIP & don't know why it's a failure of registration. Not any other filtering or firewall configured in the router and it works in accordance with all the default settings. Would you be able to give advice on this please?

  Debugging is nice, but it discloses the contents of INTERNATIONAL packages only. No responses. Intercept (incoming and outgoing) SIP packets.

  I have the average time - do not use the names in the proxy configuration. Use the IP address.

• Windows Backup & restore leaves gaps in the backup period date ranges

  I noticed that backup & restore leaves gaps in the date ranges displayed on the screen of backup periods under the function to manage the space.  This means that files change during the interval periods have not been saved?  For example, the screen shows currently backups and the following periods:

  Jan 26: 12-18 Mar, 12 GB 10.40

  Apr 04, 12-13 Apr, 12 GB 19.62

  27 April, 12-27 Apr, 12 GB 05.16

  May 06,12 - May 06,12 02.41 GB

  May 27.12 - 17 Jun, 12 GB 03.41

  What is the importance of gaps?

  How can I tell that B & R is fully backup all files that changed since the last backup run?

  How can I varify the 1st backup is a backup full?

  How can I varify that the system image backup is up-to-date?

  I save approximately once a week to a USB external hard drive. I use options "Include a system image" and "Let me choose" to select the files and have selected the option 'keep only the last frame system & minimize the space used '.

  Hello

  Backups are created in sets called backup periods. To maximize your disk space, Windows backup backup all folders selected, the first time it's run and then it only backs up files that are new or have been modified since the last backup was made. Periodically, Windows creates a new, full backup. Each full backup is called in a backup. When you view your backups of files, you can see all the backup periods with date ranges. If you decide to delete backups of files, you should always keep the most recent backup of the file.

  Reference:

  Should what backup settings I use to maximize my disk space? http://Windows.Microsoft.com/en-us/Windows7/what-backup-settings-should-I-use-to-maximize-my-disk-space

  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

• X100e backup/restore

  Hi, I just bought a x100e with preinstalled Windows 7 and wonder how to make a system backup/restore correctly. I need to install Ubuntu in a few days and create/edit a few partitions that exist (I guess that this will replace mbr) and I want to be able to restore the initial state of the system. So, what's the best "workflow" to save/restore, System State or reset to factory settings x100e (witch is probably most interesting for me) in my dulling?

  Hi and welcome to the forum!

  You can create discs of recovery on a USB drive or burn it to DVD by attaching an external optical drive, old method to see this:- http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/Creating-x100e-recovery-media-on-USB-stick/ta-...

  With recovery discs, you can restore your system to factory settings any time you want.

  This before installing Linux, otherwise you will not be able to once you have installed Ubuntu.

  I hope this helps.

• iPhone 6 s - 100% carbon copy backup/restore to iTunes - is that possible?

  Hello

  I am trying to find a way to save/restore an iPhone via iTunes installation so that the restoration of places any return on the phone with the same configuration (essentially, an exact clone of the original installation that is being backed up).

  Questions that I met with attempts to use iTunes for backup/restore:

  • Passwords and other security information do not restore.
  • Applications not getting restored
  • WIFI networks not get restored
  • attached randomly do not restore (some, not all).

  iCloud backups solve this problem (sort of).

  • It takes an internet connection takes too long and medium, and you are left without a phone can be used for a period of time, so that the restore process is complete. I'd rather do it via iTunes.
  • Passwords and other security information do not restore.

  Any help please? In the end, I'm looking for a way to backup my phone to a PC and restore it so it looks identical to how it did before the backup.

  For a long time (perhaps in the iPhone 4/5 days?) this process described above works, 100%. Apple changed something in recent years.

  Thank you

  Bob

  The backup does not contain music or apps, because they should be in the media library iTunes on your computer, and if you synchronize right after that the restoration of the backup is then reinstalled. Normally this is done automatically when you perform a restore if you not to interrupt.

  Passwords and health data are only saved if you choose encrypted backup.

  There is no way to make a backup "image" of the phone, but if you use Encrypted and let run until the end, that it will restore everything the way it was.

  See this Apple trick for some details: about backups in iCloud and iTunes - Apple Support

• I'm trying to import and backup/restore/Choose file... / after backup correctly and I see the file, but there is no JSON extension. What can I do?

  I'm trying to import and backup/restore/Choose file... / after backup correctly and I see the file, but there is no JSON extension. What can I do?

  I backed up my favorites using 'import and backup/Backup' on an external HD, installed Windows 10 and went to restore my bookmarks and noticed the file named "Firefox bookmarks-2015-09-04"had no extension and does not work."

  Please advise! Thank you! Sincerely, s

  If you add the .json extension, it works then? Why people who design browsers or extensions them do create files with no extension name, in spite that these extension names are essential to make the files can be restored? I could never understand that.